[Q] Xperia U. - Sony Xperia P, U, Sola, Go

Hello. I`m new here to xda-dev and i kinda need you help. I have a sony xperia u device, and today i tried to get its factory settings back. It restarted normally, but then it blocked. I waited several minutes and nothing happend. I removed the battery and tried to reopen it. It showed me Sony logo, Xperia, then blank screen, and restarted again. It keeps doing that, without opening for good. I tried to repair it with sony companion, but i cant get it connected due the fact it still restarting and keep disconecting from pc. What shall i do?
(sorry for my poor english)

narciseduard said:
Hello. I`m new here to xda-dev and i kinda need you help. I have a sony xperia u device, and today i tried to get its factory settings back. It restarted normally, but then it blocked. I waited several minutes and nothing happend. I removed the battery and tried to reopen it. It showed me Sony logo, Xperia, then blank screen, and restarted again. It keeps doing that, without opening for good. I tried to repair it with sony companion, but i cant get it connected due the fact it still restarting and keep disconecting from pc. What shall i do?
(sorry for my poor english)
Click to expand...
Click to collapse
When you connect it in fastboot mode it disconnect?

Angristan said:
When you connect it in fastboot mode it disconnect?
Click to expand...
Click to collapse
You mean lock button and -vol ?
EDIT: I connected again my phone to pc, and tried to open it with vol+ and same problem happend, still restarting without go on for good.

Not even opening fastboot.

narciseduard said:
Not even opening fastboot.
Click to expand...
Click to collapse
Just flash official ftf back with vol down. No need to press power button when you're booting to flash mode or fastboot mode. Just press vol + (fastboot) or vol - (flash) and plug in USB.
Sent from my ST25i using Tapatalk 2

narciseduard said:
Not even opening fastboot.
Click to expand...
Click to collapse
I did that, it flashed a green light for few secs, and then it went charging. No menu opened.

I can hear the sounds from my laptop when i try to conect it, to view that menu, but it disconects after a few seconds.

narciseduard said:
I can hear the sounds from my laptop when i try to conect it, to view that menu, but it disconects after a few seconds.
Click to expand...
Click to collapse
Did you install flashmode driver from flashtool\drivers directoty?
What windows version you have?

install proper drivers for your window and to stop the bootloop hold power button and volume up key it will vibrate once then will vibrate thric again and it will poweroff your device

I finnaly managed to to conect my phone to pc, but emma tells me that my phone is locked and i dont know how to unlock it, because it can turn on. What i do now? :l

narciseduard said:
I finnaly managed to to conect my phone to pc, but emma tells me that my phone is locked and i dont know how to unlock it, because it can turn on. What i do now? :l
Click to expand...
Click to collapse
What is it that you want to do?
Flashing the formware does not require unlocking the phoen.
Which lock is it SIM or bootloader?

ChikeD said:
What is it that you want to do?
Flashing the formware does not require unlocking the phoen.
Which lock is it SIM or bootloader?
Click to expand...
Click to collapse
It said that SIM is blocked. And my problem is in the 1st post. My doesnt come up anymore. It just shows me Soy and Xperia logo, then switch off, and keeps doing that, without going on for good.

narciseduard said:
It said that SIM is blocked. And my problem is in the 1st post. My doesnt come up anymore. It just shows me Soy and Xperia logo, then switch off, and keeps doing that, without going on for good.
Click to expand...
Click to collapse
First shut it down, press power + volume down until you feel 3 vibrations (about 10 seconds)m if not take out the battery for a minute.
Download flashtool install and open it and connect in flash mode. It's wither volume down and connecting to pc or colume down, I am not sure about XU. If it shows it's connecting in flash mode and stay in this mode for about 45 seconds you can repair with PC Companion or flash with SUS

ChikeD said:
First shut it down, press power + volume down until you feel 3 vibrations (about 10 seconds)m if not take out the battery for a minute.
Download flashtool install and open it and connect in flash mode. It's wither volume down and connecting to pc or colume down, I am not sure about XU. If it shows it's connecting in flash mode and stay in this mode for about 45 seconds you can repair with PC Companion or flash with SUS
Click to expand...
Click to collapse
I dont have to shut it on cuz it aint go on lol. It stays on on flash mod, but when i open sony companion to fix it, it tells me to remove the batter and put it back. But if i dont open it in flash mode, it never comes up, and its connecting and disconnecting from pc in 5 secs.

narciseduard said:
I dont have to shut it on cuz it aint go on lol. It stays on on flash mod, but when i open sony companion to fix it, it tells me to remove the batter and put it back. But if i dont open it in flash mode, it never comes up, and its connecting and disconnecting from pc in 5 secs.
Click to expand...
Click to collapse
You wan't to fix it or not? it's on boot loop not shut off, shut it off.

ChikeD said:
You wan't to fix it or not? it's on boot loop not shut off, shut it off.
Click to expand...
Click to collapse
I think i finnaly managed to fix it. I downloaded SUS and fallowed the steps. Now i`m waiting for the phone to come up.
Meanwhile.
It works !!!! Thank you so much for your help, i cant say how much i`m greatful to you! Thank you ! So it worked with SUS. Thanks everyone for your time and help !

Related

Man.. i bricked my xperia :/

I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
XTacDK said:
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
Click to expand...
Click to collapse
restore your phone via SEUS from pc companion it will revert your kernel to stock and install the stock rom
Don't worry, I did the same thing the first time I tried to install Zombie Panic. Download the Sony Ercisson Update Service from here, insatll it on your PC and follow the instructions to install (even if it says you have the latest version). It'll take you back to Stock ROM and your phone will boot.
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
XTacDK said:
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
Click to expand...
Click to collapse
you should start the update process while the phone is disconnected and press repair then when asked connect the phone while you are pressing the back key to connect via flash mode.
Wait.. but i choose the reprair phone option and now it trying to reprair it, i just believe, at this will save my phone
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
XTacDK said:
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
Click to expand...
Click to collapse
for mini you can't take the battery out
just turn off the phone for 5 seconds press the back key and connect the phone to the pc it should the start the repair via flash mode
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
XTacDK said:
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
Click to expand...
Click to collapse
mmm try to flash a stock kernel from the forum on this link via flashtool
http://forum.xda-developers.com/showthread.php?t=1254225
and then update via SEUS it should work...
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
XTacDK said:
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
Click to expand...
Click to collapse
well the only way to remove the battery of x10 mini is to disassemble it so send it for repair is better.
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
well man this is not the worst! i have now while talking to you the worst brick! i crashed my bootloader and i can't even flash my stock kernel!
i cant do this too,,, But i think if i restart the phone, so i see kernel nAa 6 logo and i will install mCM7! I must be optimist, cause i want to cry now ;D
XTacDK said:
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
Click to expand...
Click to collapse
Prepare SEUS on repair mode, until message to connect phone.
Press and hold power button, then press home button (don't release power button) and wait phone off. press and hold back button then connect the usb cable.
thank you!!!!you saved my phone~! Now can install mCM7.... thank you!!!
I was tryin to install MiniCM7 and during my noobish attempt I pretty much deleted everything on my phone. Factory reset and such. And I attempted to fix by rebooting the phone but now all I get is the Sony Ericsson Logo and when I try to turn the damned thing off it turns back on. I tried SEUS but even after quickly hitting back and plugin the usb cable after Home+Back+Power no dice. Can anybody out there help this desperate noob soul :c
Cant you pull out the battery connector underneath the rubber bit next to the camera to turn it off??
Sent from my U20i using xda premium
Battery Disconnected What now?

[Q] PLEASE HELP! U20i X10 mini pro stucked

Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
kobrn1 said:
Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
Click to expand...
Click to collapse
you didn't flash nAa's kernel, as instructed in the post where you got the ROM from.
thanks a lot, but u didn't help me at all, in this situation...
kobrn1 said:
thanks a lot, but u didn't help me at all, in this situation...
Click to expand...
Click to collapse
no, i didn't... how were you thinking of making a recovery in flashtool then?
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
kobrn1 said:
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
Click to expand...
Click to collapse
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Thanks will try that, than im comeing with the news..
SmG67 said:
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Click to expand...
Click to collapse
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
kobrn1 said:
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
Click to expand...
Click to collapse
You can try to enter flashmode by pressing HOME and POWER button at the same time, that will give it a hard reboot. As soon as the screen goes black (backlight off too), press the back-button. Do this with the usb-cable already attached to your phone and your pc. Ofcourse you do this only when flashtool or SEUS/PC Companion show you the popup to connect your phone in flashmode.
I had the same problem with my E10i, and that home+power than back b. combo helped! :good:
My cell was stucked on bootlogo, but in E10i (X10mini) you couln't pull out the battery just like that, so if you whant to SEUS repair your phone, you must have the phone turned of completly, but i couldn't do that. So i start SEUS whait till i get to the point when he whant your phone connected, then i press home+power button, managed somehow to plug in USB c. than press the back button and releas the home+power buttons. The rest is history...seus recognize the phone...download the files...and repair my phone.
Good luck mate! Try it! :fingers-crossed:
Okay, i've made it.
Shortly, the 1rst problem was the windows 8, ive reinstalld the 7th and SEUS on it, then easily selected the phonetype from the list, than holding back button, than connecting the cable, easy light clean install and thats it.
Thanks guys.

[Q] [U] Not turning on after installing kernel. Bricked?

Hi guys, yesterday I unlocked and rooted my Xperia U, as I didnt have time anymore, I decided to install the kernel today, so when I installed it, I tried turning on my phone - nothing. I just got that red light thingy sometimes that is active 2-3 seconds, I tried charging but still nothing, funny thing is, when I connect it to my 2nd PC with XP on it, it connects, but in My Computer I only see "Digital Camera" and cant open it, also Windows Explorer popup for it keeps constantly, well, popping up but its empty and I cant select anything. I'm now downloading flashtool, is there anything I can do else? Im desperate, I got this phone for only 3 days.
Okay, now I'm in flashtool, I'm about to start flashing but I cant get into fastboot mode... What should I do?
Bump? :crying:
Please dont make me spam, I searched everything, I'm pretty sure my problem is unique, I cant access fastboot. Nothing
try this:
1. charge your phone for about 1 hour
2. open flashtool then click fastmode and choose your firmware.
3. make sure your phone is off ( i dont know if this is the same with xperia U volume up+power button wait til vibrates three times)
4. when it says connect your phone into fastmode, connect your phone via usb, then hold volume up + power button and wait till it vibrates three times, then hold power button+ volume down.
5. it will flash your firmware.
or you can flash the stock kernel (just extract from ftf, same instructions above).
I charged it for the whole night, the problem is, I cant access fastboot. All the drivers are installed but nothing.
I'm sending my phone for repair probably, with rooting I broke my warrant, what's going to happen?
tavic said:
I charged it for the whole night, the problem is, I cant access fastboot. All the drivers are installed but nothing.
I'm sending my phone for repair probably, with rooting I broke my warrant, what's going to happen?
Click to expand...
Click to collapse
Then y don't you flash it with your firmware via flash mode
Sent From Xperia Sola White (MT27i)
Rooted Stock ICS
Hit Thanks If I Helped!!
Ok fast boot doesn't work,how about Flashboot?
Sent from my LT26i using xda premium
Nope, can't access that either.
Ok does your phone vibrates when you turn it on?Do you have any LED light?Does it respobd to anything?
Sent from my LT26i using xda premium
Not vibrating, also, no led.
The only sign I get is when I take out the battery and put it back in, it vibrates for a second. Thats it.
Try to remove the battery and than try all keys combination,and also try to get to connect it to your flashtool.Try hard reset combination.Remove the battery,put the battery,hold power+vol. up button for. 20 sec. If that doesn't make.Try the same only with vol. down button .If that doesn't work,take it to the service shop than....
Hit Thaks if I helped
Hold vol up when replacing the battery, then quickly shove the USB cable in. Phone should vibrate when you put the battery in and you have a second or two to get it into fastboot or flashboot.
Probably a bad install of a kernel, make sure you're using the right one for your phone.
Not sure if it works for the U, but that's how I fixed my Sola.
Snowstormzzz said:
Hold vol up when replacing the battery, then quickly shove the USB cable in. Phone should vibrate when you put the battery in and you have a second or two to get it into fastboot or flashboot.
Probably a bad install of a kernel, make sure you're using the right one for your phone.
Not sure if it works for the U, but that's how I fixed my Sola.
Click to expand...
Click to collapse
Exactly what I did too. Try again and again. You'll succeed. have stock kernel at hand.

[Xperia U] boot loop/soft brick

While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom

problem with my z2..help please..

hi..i have a problem with my z2..it wont turn on..when plug into charger..the display turn on for a couple second without showing anything and then only led turn on..showing red..orange or green depends on battery i guest..i wanna try to flash it using flashtool...when i try to flash it..i get stuck at hold volume down button...it wont detect my phone..i cant enter flashmode..but..at the script..it said..devices connected with usb debugging off..driver was succesfully installed..so this is some question from me..hope you guys could help me to solve this..
1)what actually happened to my phone??
2)if i need to turn usb debugging on to flash my phone..how do i turn it on??..bcoz my phone wont turn on..
3)do you have another solution..beside flashtool??
thanks...
Hi,
You could give PC Companion a try or Sony's Emma.
@soka said:
Hi,
You could give PC Companion a try or Sony's Emma.
Click to expand...
Click to collapse
pc companion and emma also dont detect my z2..i cant connect it in flashmode..anyway thank..any other suggestion?
Download this
http://forum.xda-developers.com/showthread.php?t=2635830
install the drivers and try flashmode again.
Do you perhaps know if your bootloader is unlocked?
If so try to get into fastboot mode ( volume up ) and flash a custom kernel like androplus that has recovery.
Then flash a stock pre-rooted zip.
@soka said:
Download this
http://forum.xda-developers.com/showthread.php?t=2635830
install the drivers and try flashmode again.
Do you perhaps know if your bootloader is unlocked?
If so try to get into fastboot mode ( volume up ) and flash a custom kernel like androplus that has recovery.
Then flash a stock pre-rooted zip.
Click to expand...
Click to collapse
still cannot enter into flashmode....i heard the sound from windows that my phone is connect..but not in flashmode..and also cant enter any storage...when i check at device and printer..it just show android..instead xperia z2..and cant do anything with it...i never unlocked the bootloader before...thanks..any other way buddy?
Hi dude.
Try to press and hold power and volume up buttons together for a 10 seconds until your phone vibrate 3 times,maybe help.
Ofcourse,your battery must me charged even 10 %.
Allek84 said:
Hi dude.
Try to press and hold power and volume up buttons together for a 10 seconds until your phone vibrate 3 times,maybe help.
Ofcourse,your battery must me charged even 10 %.
Click to expand...
Click to collapse
already tried...didnt vibrate..also tried red small button near sim card slot..nothing happens too...the only thing that happen is what i mention on the question when connecting to charger...actually..i tried almost everything that i get from internet..but..maybe someone know something..other way..to get my phone back to life..so i asked here..just maybe there are solution...thanx anyway
If your screen turn on even for a second when you connect to the charger there must be a solution.
The bad thing should be if screen not responding at all and that would mean that motherboard is dead.
Послато са D6503 уз помоћ Тапатока
looks like you phone freezed.
Try to use hard reset button, because "Device Connected with USB Debugging off" means your phone is turned on.
Press and hold hard reset button (near SIM Slot, small red button) for a moment to 3 buzzes. Then leave this button. Try to turn on. If it won't boot, do the same procedure and your phone will be turned off. Connect your phone in flashmode, FlashTool should recognize it.
Hope it helps, got similar problem, it has fixed it
Bruce666 said:
looks like you phone freezed.
Try to use hard reset button, because "Device Connected with USB Debugging off" means your phone is turned on.
Press and hold hard reset button (near SIM Slot, small red button) for a moment to 3 buzzes. Then leave this button. Try to turn on. If it won't boot, do the same procedure and your phone will be turned off. Connect your phone in flashmode, FlashTool should recognize it.
Hope it helps, got similar problem, it has fixed it
Click to expand...
Click to collapse
didnt work buddy..doesnt get a single buzzes...yeah..because of the screen turned on for a couple when connected to charger or pc..and wnidows make a sound when coneected..it really does give me a false hope..haha
khafiful said:
didnt work buddy..doesnt get a single buzzes...yeah..because of the screen turned on for a couple when connected to charger or pc..and wnidows make a sound when coneected..it really does give me a false hope..haha
Click to expand...
Click to collapse
oooops... looks like a strange brick :crying: No idea send it to repair I don't see any other options

Categories

Resources