Okay well I have used bionix v for the past day. I was wondering if anybodys phone freezes as much as mine it wasn't a problem until I flashed the dragon kernel. Could that be the problem with it should I flash back to stock kernel? My phone freezes at least once every two hours and its just getting annoying now.
Sent from my SGH-T959 using XDA App
Yeah, try flashing back to stock kernel.
The stock kernel is the stock ka7 right?
Sent from my SGH-T959 using XDA App
its overclocked kernel to 1.4 ghz ! ur phone might not be aboe to handle that thats why it freeezez and look up on roms page to see which kernel its running on find and redownload the kernel and flash it back
I understand that I can fry my hardware overclocking to 1.4 ghz that's why I only overclock to 1.2 ghz.
Sent from my SGH-T959 using XDA App
Related
i'm just curious, because i've been interested in overclocking my Vibrant to 1.6, even 1.2, and i KNOW you can overclock it to 1.2 right now, but here's the problem.
i have the Auxura 2.05, and on top of that, i'm using the new and updated BlackFroyo. it works great, but i'm having a hard time figuring out how to use Auxura 2.05, BlackFroyo, and the Core 1.2GHZ from TeamWhiskey all at the same time. if there is a way, can anyone please enlighten me? i would really like to put this into effect.
-ThinkTank
Why don't you use one of eugenes kernels? Seem to work fine on most 2.2 roms.
Sent from my SGH-T959 using XDA App
The core kernels only work with 2.1 roms.
Yeah like the last poster said the core kernels were/are for 2.1. If your registered at TW website they have a 1.2 ghz kernel in the forums. Brahma. Im not sure we have a perfectly stable fully operational 1.2 kernel yet. TW hasn't done anything with Brahma in a little while and Eugene has pulled some of his. If you're using Axura I would just use the voodoo kernel in the OP for now. I have been all week and its pretty solid. Good performance and battery.
Sent from my SGH-T959 using XDA App
Hey guys, I just recently flashed Bionix 1.3.1 Gingerbread Edition and also flashed DOW 1.4 Ghz w/Voodoo 5 through CWM. For some reason it won't let me overclock my phone, when I go into SetCPU it actually only shows my highest level at 528Mhz. Don't know what to do any help would be appreciated.
Sent from my SGH-T959 using XDA Premium App
dow hasn't upgrade for a long time,try the overstock
You need to make sure to go into the options and have it autodetect speeds. It should update with possible clock speeds.
Be careful with dow though. It has been frying nand and internal sd including mine.
Sent from my SGH-T959 using XDA App
Hey guys, I've been flashing roms and kernels for a while now so i know how to do so. I was just wondering what kernel you guys are using right now and which one gives you best battery life. Currently I'm running Immortality v2 but i am getting persistent SOD's after a few hours of screen off. I would like something that could last me a whole day which is about 18 hours of just moderate texting and occasional browsing. I have tried the bali UV kernel but i cant get it to work for a full day for some reason.
Btw, I'm running bionix 1.3.1
I recommend Cmenards Overstock Kernel. In my opinion he makes the best ones around.
Simply Honey 3.9.1 powered by a 1.2ghz Bullet kernel..Simply Badass \m/
Bullet 1.42 bionix ng works perfect for me with heavy use tho dont expect to get through a whole day but on the other hand did I mention it was fast as hell!!
Sent from my SGH-T959 using XDA Premium App
Bali for sure
jlg19753 said:
Bullet 1.42 bionix ng works perfect for me with heavy use tho dont expect to get through a whole day but on the other hand did I mention it was fast as hell!!
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
I go between Bali and Super DragonMODz. Both are great.
For those who say bali. Which one? The UV right? And it doesn't work with set cpu or volt. ctrl. So does it require any setup?
Sent from my SGH-T959 using XDA App
I've installed the full GeeWiz Rom/Kernel on my Fascinate and I really like my phone now after a running stock for quite a while and being less than impressed.
My question. The phone is darn near perfect except for a little lag and so I thought I would try the voodoo lag fix. Is there a kernel as stable at the GeeWiz kernel that contains the lag fix? Could someone point me in the proper direction.
I've read quite a bit and must say that there are a lot of opinions and links out there but I can't quite seem to find what I am looking for.
thanks,
you have 2 options.. 1.6 otb fusion kernel or the 0808 pbj kernel. I recomend the pbj but not all phones can handle the undervolt...you will have to try it and see.
How do u install a voodoo Kernel on geewiz rom?
Zong00 said:
I've installed the full GeeWiz Rom/Kernel on my Fascinate and I really like my phone now after a running stock for quite a while and being less than impressed.
My question. The phone is darn near perfect except for a little lag and so I thought I would try the voodoo lag fix. Is there a kernel as stable at the GeeWiz kernel that contains the lag fix? Could someone point me in the proper direction.
I've read quite a bit and must say that there are a lot of opinions and links out there but I can't quite seem to find what I am looking for.
thanks,
Click to expand...
Click to collapse
Pw 1. 2 and gee wiz 1. 1 with the gee wiz kernel is as close to perfection as you're gonna get with TW froyo. Otb is not stable enough and will make your camera crash most of the time. Most phones cannot handle the Uv on imnuts Pbj.
I ran pw 1. 2 with gee wiz kernel for 10 days without a single re boot or freeze. No bells and whistles but by far the most stable Rom I ran on this phone
PWGB,TKSGB10-15, adren shot xix honeycomb2.03, ec09 radio.
Pw rom I have random freezing on trail xteme2 and zombie killers..
Running gee wiz now..would like to install voodoo?
Sent from my SCH-I500 using xda premium
Download kernel to sd card. three finger into recovery, wipe cache, dalvik, install zip from sd. fyi there are guides all over this forum that explain this.
Lol. ..tried 5 times last night using 2 seperate voodoo kernels for gee wiz...just hangs on samsung when I reboot
Sent from my SCH-I500 using xda premium
When I Odin back geewiz stock kernel, phone boots normal
Sent from my SCH-I500 using xda premium
finally got one voodoo kernel running, odin the 10/27 kernel...we will see how it goes
same deal on geewiz rom and this 10/27 kernel...****
Sent from my SCH-I500 using xda premium
rsswga said:
Lol. ..tried 5 times last night using 2 seperate voodoo kernels for gee wiz...just hangs on samsung when I reboot
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
well you cant flash a froyo voodoo kenel on a gingerbread rom and vice versa. Thats most likely was your problem. In the op you posted geewiz 1.1.1, which is a froyo rom and I gave you a 2 froyo voodoo kernels that will work. Now you post saying the tks kernel flashed and booted fine meaning you are on geewiz 2.x ei20 gingerbread. In order to get accurate answers it helps to provide accurate information.
im running geewuz 2...eI20 ec09 modem...stock gee kernel ..
Sent from my SCH-I500 using xda premium
rsswga said:
im running geewuz 2...eI20 ec09 modem...stock gee kernel ..
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Make double sure you're matching roms with the right kernels. Wipe dalvik before flashing. Also, make sure you're running a reliable recovery
tsm res1.2, TKSGB 11-06, lag fix
rsswga said:
im running geewuz 2...eI20 ec09 modem...stock gee kernel ..
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
I understand that...was just saying why you got stuck at the samsung screen lastnight. If your on eh09/ei20gb then tks kernel or imoseyon's lean kernel are your other 2 options.
Ok thanks
Sent from my SCH-I500 using xda premium
I have been running bail-x for a day or so with bionix and it just started crashing on me what is the best settings should it be at and what should I set bail 1.8.8?
Sent from my SGH-T959 using XDA App
lilredstang said:
I have been running bail-x for a day or so with bionix and it just started crashing on me what is the best settings should it be at and what should I set bail 1.8.8?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
suggest wiping cache and reflashing , also try flashing bali 1.8 uv
I used the kernel flasher should I flash in red screen or do they do the same job?
Sent from my SGH-T959 using XDA App
IMHO, its best to flash custom kernels with CWM Recovery, SGS Kernel Flasher is a great app, but it can be a little touchy at times. Also, drhonk builds those kernels solid, and i think they can withstand a bomb attack. But really, if Bali-X is giving you problems, then maybe you should try the regular Bali since some phones can't handle OC and/or UV.