So I just received a replacement phone because I bricked my previous one and I think I may have bricked this one as well (because I'm an idiot).
I can't get anything to show up on my screen except the screen that has a phone a yellow triangle with a ! and a computer. They're little icons lined up in the middle of the screen when I try to turn it on.
How this happened:
I upgraded my stock phone to Froyo using Kies and then I tried to flash the KA6+Voodoo firmware that I found at http://forum.xda-developers.com/showthread.php?t=870480 using Heimdall on my mac.
I had put the phone into download mode, selected the zImage and clicked start and it just sat there for a little bit before it said "Failed to receive device info response!"
I didn't know what to do after that so I just tried to restart the phone and I ended up with that error screen that I'm becoming more familiar with than I would like to be...
If anybody can help save my phone I would really appreciate it.
You just need to go through the normal odin steps to go back to stock.
The instructions on how to odin are in this forum.. I'm kinda lazy this morning sorry.
Odin isn't recognizing my phone right now and Windows is saying that it's detecting a "gadget serial" device but can't successfully install drivers for it. Based on some advice I found elsewhere, I'm installing Samsung PC Studio which should contain the drivers for the "gadget serial" device.
Hopefully Odin will work then...
also try a different cable. I know that if I use certain cables odin will not work. I have to use the cable that came with my phone.
Google Galaxy s USB drivers and install those.
And your phone is only bricked if nothing ever comes on. So your still golden. Just use the volume button download mode method and odin to stock.
IT'S WORKING. THank you!
The only problem now is that it's not recognizing my sim card...
blim8183 said:
IT'S WORKING. THank you!
The only problem now is that it's not recognizing my sim card...
Click to expand...
Click to collapse
Turn off the phone and pull out the sim card. Reinsert the sim card and reboot the phone. It should be recognized.
I just tried that a couple times and it's still not recognizing it.
blim8183 said:
I just tried that a couple times and it's still not recognizing it.
Click to expand...
Click to collapse
OMG PANIC! Insert another sim and see if that works. If so, pull the battery for a minute and try again with your sim. If that doesn't work call T-Mo and confess that you broke it.
XPLANE9 said:
Google Galaxy s USB drivers and install those.
And your phone is only bricked if nothing ever comes on. So your still golden. Just use the volume button download mode method and odin to stock.
Click to expand...
Click to collapse
I'm trying to restore my phone to factory settings using (http://forum.xda-developers.com/showthread.php?t=734475) but once again I've gotten the phone ! computer error. However, this time when I plug the phone into the computer to try to use Odin, it's no longer recognizing that a USB device has been plugged in.
I've been trying different combinations of battery pulls, plugging it in after the phone is on, plugging it in before it's on, etc. and nothing is working.
EDIT: Nevermind, I got it. Ignore me... it case it wasn't clear already, I'm a n00b and have no idea what I'm doing.
Moved of: Samsung Vibrant > Vibrant General
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Related
Hi Everyone, Really need help here
I (drunkenly) messed around with CWM on my phone and formatted a few partitions that I shouldn't have. Result - brick!
Had a JTAG done and it was revived and placed back onto Stock 2.3.3
Got my phone home and went to flash Litening ROM 6.1 onto it to regain root access... ODIN got about 2/3 through and failed.
Now I've got a phone that my computer's won't recognise. Windows is saying that the USB device has malfunctioned. Is there any way I can fix this without having to shell out for another JTAG repair?
When I turn on the phone I get that A....!....A looking symbol on my screen. Recovery mode does the same thing.
I can get to Download mode, but again my PC can't recognise it.
Any ideas?
try reinstalling the drivers.. That may work..
Sent from my GT-I9100 using xda premium
thanks, giving it a go now.
...you did mean from within Kies though right?
I'll let you know how I go.
rikta said:
thanks, giving it a go now.
...you did mean from within Kies though right?
I'll let you know how I go.
Click to expand...
Click to collapse
Yes, you can uninstall kies and install it again. It worked for some users.. Make sure kies is off when flashing a new firmware..
Sent from my GT-I9100 using xda premium
Odin the God of rom flashing is telling you flash stock and stop playing with your phone as next time you will get Thor .
jje
Odin the god of flashing is being a pain in my ass!
All I want is for my GS2 to be rooted and working - I still don't get how it's failed
Kies is still uninstalling...
do you have a usb jig? that normally forces it into download mode.. dirt cheap from ebay......... have a search
nutmegy said:
do you have a usb jig? that normally forces it into download mode..
Click to expand...
Click to collapse
I can get to Download mode. Or am I missing something?
As far as I'm aware, the JIG will reset my binary counter and take me to DL mode - isn't that what Vol Down + Power + Home does?
with a JIG would my phone be more likely recognised by my PC's?
Thanks for all the reply's too by the way guys!
Okay, so I removed and reinstalled Kies - No luck
Download Mode is still showing Current Binary as Samsung Official though, so at least I can have it warranty repaired if need be.
I'm just finding it really hard to believe that it's bricked again, I've flashed heaps of ROM's to this phone without any issues. I just don't see how I could have two problems so close together.
Any other ideas?
You may find an answer within this thread > http://forum.xda-developers.com/showthread.php?t=1382838
I had an i9000 jtaged a while back and what i noticed was that when it came back from the shop it didnt have recovery mode at all.What I had to do was flash a couple of stock ROMs to get stock recovery back so I could Root it again.It took several atempts and fails too.Not having any type of recovery at the time of a flash might be what has caused the problem.Quite possible that if thats the case you will need another jtag
One thing you could try thats worked for me in the past is boot to download,plug in your phone and open Odin last.Sometimes its works.
cooza said:
One thing you could try thats worked for me in the past is boot to download,plug in your phone and open Odin last.Sometimes its works.
Click to expand...
Click to collapse
Thanks, gave that a go and it didn't work. Tried it about 5-6 times
Is there a specific driver that can be used to allow Odin to see my phone? I've tried all that Kies has to offer and it's still coming up as unrecognisable - Windows is seeing a USB Mass Storage controller and a Bluetooth Peripheral Device, but it's unable to locate or install any drivers since the failed Flash.
I also tried the other linked thread. This didn't work either
I only spent $180 on a JTAG repair yesterday - Should've just bought my own RIFF box so that I could do it myself.
rikta said:
Thanks, gave that a go and it didn't work. Tried it about 5-6 times
Is there a specific driver that can be used to allow Odin to see my phone? I've tried all that Kies has to offer and it's still coming up as unrecognisable - Windows is seeing a USB Mass Storage controller and a Bluetooth Peripheral Device, but it's unable to locate or install any drivers since the failed Flash.
I also tried the other linked thread. This didn't work either
I only spent $180 on a JTAG repair yesterday - Should've just bought my own RIFF box so that I could do it myself.
Click to expand...
Click to collapse
If you have access to a window xp computer give it a try, I had this issue with my captivate and my windows 7 machine wouldn't work but my old xp computer did.
An obvious and well known issue... Did you end process tree of both Kies processes in your PC's task manager?
Sorry if you have, it is all I can think of at the moment.
Sounds like it's time for you to give up flashing ROM's. Clearly someone up there doesn't like it. If your computer doesn't recognise it at all then its a faulty USB cable. So maybe that get that replaced before you demand Samsung fix your mistakes again.
postfatal said:
its a faulty USB cable. So maybe that get that replaced before you demand Samsung fix your mistakes again.
Click to expand...
Click to collapse
Hi,
I'm using more than one cable. They seemed to both work fine too until the failed flash.
I didn't get Samsung to fix it, I took it to a mobile repair shop, I didn't demand anyone do anything either - I paid royally to have it fixed and would prefer to fix it myself than be charged again.
@jhernand1102 - I'll give this a shot now, fingers crossed!
Hello all, I have a GS3 international GT-I9300
I'll try to go through the story as fast as I can and give as much detail so you guys can understand how I got here.
Bought the phone unlocked, I was stock, I rooted and then I decided to install a new ROM. I went with Resurrection Remix, it was working great. I did this on a desktop back home. They released a new update to RR so I did a OTA update with "Update Me" apparently the thing flashed but it didn't, the phone still worked but NFC wasn't working as well as having lost root access and some other stuff wasn't working correctly, but I lived with it.
I moved to Florida (home is in NY) and I have a laptop with me, for some reason my laptop used to be able to transfer files to my S3, but it wasn't doing it any more after a while. So it would just charge it. I was in a hotel room last week trying to tether via USB but the PC wasnt having it, it could not locate the phone. This week I moved to a different hotel with internet and decided I would flash stock on my S3 to get rid of all these bugs and get root again, I tried flashing stock through recovery and it wasn't going, so I tried flashing RR again (this time downloaded from the site RR site) and it worked. Still no USB connection but I had root back. I looked around my PC and apparently the Samsung drives are not installing or something on my PC. I installed Kies, but nothing, I tried a stand alone driver install and nothing, so I just gave up and bought Mobile Odin pro from Gplay to try to flash again.
Mobile Odin for some reason (I blame it on myself) wasn't finding/flashing stock so again I decided to try and flash RR and see what would happen. It flashed RR and turned on fine. Then I just decided to look for an NFC fix on XDA. Once I found my NFC fix (http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367) I decided to just copy the files to the system folder, NFC still not working, rebooted and NFC still no working, so I figured I would try to flash the fix through mobile odin seeing as how I can't get my PC to pick up on the USB. I tried flashing but MO just kept bouncing it back and re-booting into RR. Tried again and no flash. So I decided to again try and flash stock. I tried going into Recovery, the phone shut off like it always does, came back on but stayed in the Galaxy S3 GT-I9300 logo and would not move. I shut it off again, tried turning it on again and still stuck on the galaxy logo. Now, if I leave the phone off and plug in the USB, it won't show the battery charging image, it will actually turn straight onto the galaxy logo again and stay there. I can get the phone into download mode, but like I said my pc won't recognize the drivers.
Now, here are my questions:
What happened?
Can this be fixed?
Am I an idiot?
If I can get the drivers installed on another PC as well as Odin (1.85), will the new PC "see" the S3 or are the drivers on the phone deleted as well? (if that sort of thing can happen, idk.)
I'm going to see if I can borrow a buddy's PC and download the drivers as well as odin to try and bring my S3 back to life, I just want to know, what happens if I can't get the other PC to pick it up ether because the drivers on the phone are deleted (if that's a thing) or what I can expect if it is connected.
What are the steps or guides to follow here? I just got it into Download mode and it says on the top of the screen:
ODIN MODE
Product name: GT-I9300
Custom Binary Download: Yes (2 counts)
Current Binary: Custom
System Status: Custom
sorry , i am sometime getting headache reading long english text so i just briefly look over.
your PC doesn't recognize your S3 ? is that correct ? hmmm , is it possible that your PC (Microsoft Windows I assume?) system is damaged due to something like virus or some reasons ? i have encountered that kinda problem before and be OK after i reinstalled the system.
If it's a soft brick, then it can defiantly be fixed. You might, however, lose your data along the process.
Be glad it's not hard bricked
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
djembey said:
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Don't forget to delete kies as you only need the drivers
Sent from my GT-I9300 using Tapatalk 2
Thanks for the replies guys. I'll try to fix tit today, I didn't get a chance to do it last night. If anything I'll update you guys with what's going on.
Like I was saying, I'll try using a different PC to fix it. Now, if I can't get Odin to recognize the phone, what would be the next step?
Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying:
Hi all,
I have searched extensively for an answer to this and havent found a satisfactory answer. I tried to reflash my i9100T with a stock firmware to deal with an earlier problem. The phone was detected in windows and kies and odin, and I began to reflash it. But I must have done something wrong and the process failed. After rebooting the phone I was greeted by the "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
I can get into download mode but not into recovery mode but more frustratingly the device is now not seen by windows, odin or kies. I have tried a number of cables and usb ports. I have tried using a different computer and heimdall instead, but the device is just not seen at all. I have tried rebooting, etc, but nothing happens when I plug the device into a computer. Does this mean my device is truly bricked?
Is there anything I can do to tell if my device is seen in windows/osx/linux(ubuntu) at all?
I know there are a number of similar threads all over, but the circumstances in all of them were slightly different.
Any assistance would be greatly appreciated!
galbadia said:
Hi all,
I have searched extensively for an answer to this and havent found a satisfactory answer. I tried to reflash my i9100T with a stock firmware to deal with an earlier problem. The phone was detected in windows and kies and odin, and I began to reflash it. But I must have done something wrong and the process failed. After rebooting the phone I was greeted by the "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
I can get into download mode but not into recovery mode but more frustratingly the device is now not seen by windows, odin or kies. I have tried a number of cables and usb ports. I have tried using a different computer and heimdall instead, but the device is just not seen at all. I have tried rebooting, etc, but nothing happens when I plug the device into a computer. Does this mean my device is truly bricked?
Is there anything I can do to tell if my device is seen in windows/osx/linux(ubuntu) at all?
I know there are a number of similar threads all over, but the circumstances in all of them were slightly different.
Any assistance would be greatly appreciated!
Click to expand...
Click to collapse
Check the link below ma8
http://forum.xda-developers.com/showthread.php?t=2345831
Sun90 said:
Check the link below ma8
Click to expand...
Click to collapse
Hi Sun90. Thanks for the link. I have tried most of those things already but I will keep trying. But one thing that link doesnt make clear is whether the phone is recognised at all in windows/unix as being connected but just not being seen in odin.
Is there any way to tell whether the phone is at all communicating with the os when plugged up, and alternately if the phone can get into download mode does that mean that it CAN connect to odin/heimdall/etc given the right circumstances?
Thanks!
If it's not registering in Odin/Heimdall, you're not fixing it. That's what you need to keep trying to do (get it to register). There is no secret 'my phone & PC can actually see each other even tho everything says they can't' mode. Yes, if you can get into download mode you should be able to get it to connect to the PC, assuming there's not something stopping that from happening on the PC or phone side. This is why we have set troubleshooting steps for this situation. There's a thread Hopper made the other day that's quite detailed. You might want to consult that thread.
Yes. Keep trying. (Unless you want to take it to a service centre).
MistahBungle said:
If it's not registering in Odin/Heimdall, you're not fixing it. That's what you need to keep trying to do (get it to register). There is no secret 'my phone & PC can actually see each other even tho everything says they can't' mode. Yes, if you can get into download mode you should be able to get it to connect to the PC, assuming there's not something stopping that from happening on the PC or phone side. This is why we have set troubleshooting steps for this situation. There's a thread Hopper made the other day that's quite detailed. You might want to consult that thread.
Yes. Keep trying. (Unless you want to take it to a service centre).
Click to expand...
Click to collapse
Thanks for the advice. I ended up taking it to my brothers place and it was immediately recognised by his system. Reflashed successfully so now just back to my original problem! Thanks again!
I have an unrooted Samsung S3, i just received yesterday the notification of the jelly bean 4.3 update (originally ran on 4.1.2) so i went for it OTA via wifi, long story short, after download was finished and the phone automatically rebooted itself, it got stuck on samsung logo, i have waited for hours beside it (since i have modest experience about this) and finally nothing happened, so i started researching the issue, i have tried wipe data/factory resetting (didn't work) along with wipe cache partition, and no use, i have tried kies emergency firmware upgrade and initialization, but it can't see the phone in Download mode, i tried flashing the phone with Odin307 but it also cannot see my phone in Download mode, and i have heard that if the phones usb debugging was active, the phone would be seen, but i never used it, my phone was stock all the way, please help me get my phone working again.
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
andrewwright said:
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
Click to expand...
Click to collapse
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
herculese911 said:
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
Click to expand...
Click to collapse
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Brownpanda said:
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Click to expand...
Click to collapse
before the update, the charging port worked just fine, the phone was recognized in windows in device manager, and inside KIES, now both of them can't see it, so how could it be faulty?
and for the record guys, i'm not lazy, i never post a thread until i have exhausted all other researching methods
boomboomer said:
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
no its not, showing GT-I9300
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Try ODIN v1.85. It always worked fine for me, other versions don't.
Here is a compatibility list for what is worth it.
Brownpanda said:
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
Click to expand...
Click to collapse
Can you get into recovery still??
boomboomer said:
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
herculese911 said:
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
Click to expand...
Click to collapse
Thanks for sharing your experience
Hey, i have the same issue.
Can you please link me to the recovery from external sd??
Thanks.
Shahar.