No sound on folio - Folio 100 General

I'm tired of the problems of my folio, i think only my folio has this issues. i explain
i have sound working when normal boot on foliomod all version
no sound after wake up from sleep, need reboot for work
no sound on folionotion, foliotnt and cyanogen
any ideas?

Moved to general as not android development

Related

[FIX] Touchpad Android turning off/reboot by itself when screen off

hey everyone,
I've had this problem since cm9, and now on JB AOKP. The touchpad would reboot or shut off itself when screen off. After much experiments and reading up on other people's attempt, I can confirm that the problem originates from audio (someone else discovered the problem with audio). Most of the time (at least for me), if I turn off the screen without playing any sound after booting my touchpad, it would reboot/turn off itself.
The fix is simple. After you turn on the touchpad, just play some sound and you are good. For me, I set Tasker to play a silent mp3 file 10 seconds after booting. Since then I have not gotten any reboots at all.
Another solution (not tested) is to set a boot animation sound to your touchpad. Theoretically this should work, but I can't get boot sound to work on my JB AOKP rom.
I'll check that out, thanks!
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks, I'll have to give this a try. I have been getting reboots quite a bit and I noticed when I flashed the first CM10 preview ROM where sound didn't work that there was no reboots. So I kind of figured it was related to sound. I wonder if just enabling the lock screen with sound on CM9 will be enough audio to fix this.
Just upgraded to cm-9-20121111-NIGHTLY and having problems getting the system to stay up more than a few minutes. Checked and volume was all the way down, since upping it no more crashes.
I enabled the lock/unlock sound and also switched to SGA's Fat n Creamy CM9 ROM. I only got one reboot and that was when the volume was muted. If I keep the volume up a bit then the lock/unlock sound seems to be enough to keep it from crashing.
This used to happen to me quite often, then suddenly just stopped. (Several months back)
I never once stopped to think if could be something as simple as audio.
I'll keep this fix in mind should it mysteriously start again.
Good job OP!
:good:
A silent boot sound would work right?
Sent from my HP Touchpad Dual-booting WebOS 3.0.5 and Android 4.1.2!
blmvxer said:
A silent boot sound would work right?
Sent from my HP Touchpad Dual-booting WebOS 3.0.5 and Android 4.1.2!
Click to expand...
Click to collapse
yes, but only if you can get boot sound to work

[Q] Call sound output issue Bluetooth on Galaxy S3 on CM10.1 4.2.2.

Hi Folks
Hope someone has an advice or opinion for a problem i have and did not find a solution searching through the forums. The 4.2.2 Bluetooth sound quality is no issue and also no distractions when using with my Parrot Asteroid in my car.
My problem is that when I am finished driving and have an active conversation running and I switch back to device speaker (internal or external does not matter!!!), the sound never comes back to the speakers but the microphone is switching properly to the device's mike iso the BT system. If I switch back to Bluetooth I get the sound back to the speakers of the car.
Same symptom on all the 3 4.2 ROMs I loaded so far (currently running on Dragon's Fusion ROM).
Thanks for any help!
I have exactly the same problem and by far no solution.

[Q] L9 P760 - CM 10.1 headphones button doesnt work and audio issues

Hi people.
I have found thread mentioned about these problems, but unfortunately, I have no permission to post in developer's forum, so I will post the problem here.
After installing the cm-10.1-20130513-NIGHTLY-p760, i had problem while setting sound volume at 80% - 100%, or if someone calls me while playing the music. Audio on phone completely freezes and cannot talk, nor cannot listen anything. Audio on phone completely stocks. I had to reset the phone to make audio working. This problem mentioned at http://forum.xda-developers.com/showthread.php?t=2190300&page=27 by VladimirCicanci and donACEsko. Solution was the mikegapinski' patch (found it at http://forum.xda-developers.com/showthread.php?t=2202222).
Another problem I have: cannot answer by pressing the button on headphones. When I am listening music and someone calls me, I hear the ringing tone in headphones, and on phone standard speaker also hear it. This is the strange behavior. Pressing the button on headphones does nothing. If I answer on the screen of phone, conversation is taking place correctly: phones and microphone are working. Also, I cannot end the call by pressing the button on the headphones - it doesn't working. Headphones are original, coming with the phone and working on P700 at another phone.
Can somebody help, I will appreciate it.
Thank you
Stick with RC2, the nightlies are buggy and full of problems (not always though)
it has already been mentioned: don't rant about problems in nightly builds
reset, flash the RC2 again and wait for a stable release, it's around the corner :silly:
hamdimo said:
Stick with RC2, the nightlies are buggy and full of problems (not always though)
it has already been mentioned: don't rant about problems in nightly builds
reset, flash the RC2 again and wait for a stable release, it's around the corner :silly:
Click to expand...
Click to collapse
No. Better install today's lastest nightly build when it's out. CM10.1 RC had no changes regarding our phone. Follow CM 10.1 thread.
I will wait some time and than install fresh nightly from zero.
I know this is a bit off topic but does anyone know if there are plans for CM to come to the P768? Or is it the problem of no source code for 768 JB?
Sent from my LG-P768

[Q] ringer volume low OMFGB NAND touch pro2

Hi Everyone:
I'm running OMFGB NAND on Android 2.3.7, kernel 2.6.27, on a HTC Touch Pro2.
I'm very impressed with this build and it seems to have most of the features working on this phone with Android. So I'm pretty happy. I know there are a few newer versions of Android out there, but Gingerbread seems to be working very well.
The issue I'm having is a discrepancy between the ringer volume I've set under "sound options" and what actually happens when a call is received.
I've set the volume to 100% which is plenty loud.
When a call comes in it sounds like it's only at about 50%.
What troubleshooting steps should I take?
Are there any log files that would be helpful here?
Help me,help you, help me :silly:
Thanks guys!
James

How to turn OFF android headphone safety feature

Hello everyone,
Could anyone please help me to fix an anoying thing. I have an asus nexus 7 tilapia tablet instaled in my car. rom 7.1.2, rooted, everything works fine, just everytime i reboot the volume goes down to around 50% and i have to put it back to 100%. the headphone jack is conected to the car via aux and i read that it is a android safety feature to reduce risk of ear damage when using headphones. So my question is, is there any way to permanetly disable this feature, so that the sound is on 100% by default? i would prefer an edit to some system files over an app install, but everything would be fine just to fix it.
Thanks

Categories

Resources