hi
plz i need help for my samsung galaxy T959 stuck on recovery mode its detect by adb but cannot get on to download mode..any id how to fix it.
thx.
What exactly are you trying to do that you need it to get into download mode? Do you need to ODIN something back?
yes i need to flash it by odin but its stucked on recovery mode .
Pull out the battery, sim, and sd cards. Load up ODIN, have the files loaded and ready to go. Connect your usb to your computer. Hold the up and down volume buttons on your phone (DON'T LET GO UNTIL I TELL YOU TO) and connect your usb cable into the phone. Now, pop in the battery. Let go of the buttons. You should now be in download mode and ready to go.
already tried this even tried with adb reboot download but its restart only in this recovery mode
What rom are you running currently?
i only get this result.
Can you fully boot into the phone?
phone not start fully ...its only in this mode (recovery).
Hit reinstall packages twice. Then try rebooting.
Related
Hi,
I need your help.
I am stuck in recovery mode.
I was in fast boot mode and I flashed recovery file for ICS and installed SU as per instructions.
I thought I have to disconnect the cable to go into recovery to install from SD Card and I did the same.
Now I have to get into fast boot mode to flash the original kernel.sin to get into normal mode.
Please help. I am stuck and I am trying to turn off the phone to get into fast boot.
Hold the power button and vol up for about 10 seconds, You will feel it vibrate...
Thanks a lot!!!
I was able to switch off the phone and was able to get into fast boot mode.
I flashed the kernel and I am able to see my home screen now.:good:
Have a Wonderful day/nite.:laugh:
sandydude said:
Thanks a lot!!!
I was able to switch off the phone and was able to get into fast boot mode.
I flashed the kernel and I am able to see my home screen now.:good:
Have a Wonderful day/nite.:laugh:
Click to expand...
Click to collapse
Glad i could help!
BUMP!
I'm having a similar problem. I managed to get the phone to fastboot mode, but when I wanted to flash the new firmware, Flashtool is stuck at the popup saying you need to unplug and replug the USB.
By stuck as in, there is no progress in Flashtool after I connected the phone in fastboot mode. Any help?
EDIT: Never mind. I tried to use a different Kernel again, and I managed to solve it. The one I use initially must be for GB.
Hi Guys,
After Updation my Xperia S is not Starting Up,
Can somebody tell me how to start it on ?
hi i tried to flash a kernel on my friends phone and now its bricked i can get into download mode. before u say its not bricked, i can get into download mode but it no longer registers on my computer. i have all the drivers downloaded, i downloaded kies also. when i try to boot normally i get a message saying firmware encountered an issue. i have tried moving computers and new cables. so how might i get this phone back in working order plz and thank u
slayerofpeace1 said:
hi i tried to flash a kernel on my friends phone and now its bricked i can get into download mode. before u say its not bricked, i can get into download mode but it no longer registers on my computer. i have all the drivers downloaded, i downloaded kies also. when i try to boot normally i get a message saying firmware encountered an issue. i have tried moving computers and new cables. so how might i get this phone back in working order plz and thank u
Click to expand...
Click to collapse
Does it boot into recovery mode?
Press Volume UP + Home + Power keys until recovery menu appears.
If yes, then try to wipe cache (and Dalvik cache), fix permissions and reboot.
If that does not help, you may have to wipe data (do a factory reset).
If recovery mode does not work, then your phone seems to be semi-/soft- bricked.
You will have to get the phone connected to your PC in download mode to repair it.
Here is the correspsonding thread about hw to fix a soft-bricked phone => http://forum.xda-developers.com/showthread.php?t=1457458
Good luck !
i have gotten it into download mode but my computer does not see the device
Install samsung kies?
have that installed, reinstalled, and i installed all the drivers. it was working but after the odin flash failed i couldnt get it to connect. right now im building a jib for the phone.
so built jig, now im sad..... it did nothing, now either i have to send it in or some one might know a way to fix it
Hi. I'm new to here so please i appreciate any help you can give .
So the story is... I own a samsung galaxy gio S5660 (i have Android 2.2.1 ) and i wanted to flash a custom rom on it. Well i forgot that i had to root it, so i just flashed the CWM recovery on it and now i cant get into the recovery, the samsung logo just stays. The phone works, it boots up but only not in the recovery mode :s. Also, i cant root from the pc either because i get unknown device, i installed kies, reinstalled the drivers... I get the error : Windows has stopped this device because it has reported problems. (Code 43). It charges via usb but doesnt connect as storage or something like that :/ i cant figure out what to do. The root programs dont recognize/find the device so am i screwed or what :s. I know i was stupid that i didnt think about the root. I've done the rooting on a tablet many times so i dont know why i forgot to do it :s
Thank you for reading. Hope i get an answer
BUMP BUMP-
I did a factory reset with the code from the phone and now its stuck on the samsung logo :s. It enters download mode and fastboot but the most important problem is that the pc doesnt recognize the device so i cant use odin or any similar program to flash a new recovery on it :s. Is there anything i could do?
I tried reinstalling the drivers multiple times.
I tried on 2 laptops and 1 desktop but it's all the same :S.
BUMP.
Help please
BUMP T_T
jaja
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
Method 2: http://forum.xda-developers.com/showthread.php?t=1153310
Method 3: using usb jig: http://www.youtube.com/watch?v=METM3teG5rI
It's not my fault if you hard brick your phone using this methods.
Thanks for answering, but i cant enter recovery as i mentioned early and also odin doesnt detect my phone in download mode :s. When the samsung logo just stays i plug also the usb in then the pc says it cannot recognize the device and its listed as unknown which i before also mentioned. When i attempt to enter recovery it just also stays at the samsung logo and isnt entering it :s..
Bumpbumppp
Guys i still dont got the answer :c
So, i installed A LOT of custom roms on my gs3, and the last one screwed it up, so i got android 5.1.1 on my gs3 and when it tried to boot up (after optimizing apps stuff...) it just stopped at "Finishing Boot" and it stayed like that for couple of hours, then since i don't have a power button to enter download mode i made my own homemade usb jig and got my gs3 in download mode and i got it back to stock, then it stopped at samsung logo and it was just booting like that whole night. Then i tried diffrent versions of stock roms, kernels, even new pit file, still nothing. So i've read on couple of forums that i need to enter recovery mode and wipe data & cache(but odin does that automatically right ?) and i can't enter recovery mode cause i have a broken power button(and no i can't connect wires cause when i got rid of the power button i accidentally pulled out one of the connectors).So how can i enter recovery without a power button if i can't boot up the phone ? Or is there any other fix ? Or it's dead ?
P.S I can't take it to service no warranty + binary count is 14 and i can't reset it without my phone booted up.
No power, no phone. It's that simple. Fix the power button and then you can boot it up. No other way possible.
I wish I stole my HTC M9.
you could try thru usb then adb command: fastboot reboot recovery (if i remember correctly)
edit: just read you can't even turn it on
shivadow said:
No power, no phone. It's that simple. Fix the power button and then you can boot it up. No other way possible.
I wish I stole my HTC M9.
Click to expand...
Click to collapse
Phone worked 1 year without a power button and it worked just fine, that isn't the problem here...
hansonchen said:
you could try thru usb then adb command: fastboot reboot recovery (if i remember correctly)
edit: just read you can't even turn it on
Click to expand...
Click to collapse
How do i send adb command, since gs3 doesn't have fastboot mode only download mode, and adb commands are only available thru recovery mode...
mr.r0ot said:
How do i send adb command, since gs3 doesn't have fastboot mode only download mode, and adb commands are only available thru recovery mode...
Click to expand...
Click to collapse
go to this link:
http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
download the driver, install once while gs3 booted, then in download mode install the driver again - while phone is connected
i haven't been able to get a "fastboot devices" respond while in download mode, maybe i'm not doing it right
the driver supposed to support galaxy s3 international with adb and fastboot
hansonchen said:
go to this link:
http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
download the driver, install once while gs3 booted, then in download mode install the driver again - while phone is connected
i haven't been able to get a "fastboot devices" respond while in download mode, maybe i'm not doing it right
the driver supposed to support galaxy s3 international with adb and fastboot
Click to expand...
Click to collapse
I can't boot up the phone ... it stuck on samsung logo not even boot loop...
mr.r0ot said:
I can't boot up the phone ... it stuck on samsung logo not even boot loop...
Click to expand...
Click to collapse
installing the drivers only need any gs3 but since it's stuck on logo only, you can't do anything.
i thought you said you have a home-made jig to boot into download mode
Odin don't wipe data and cache automatically. I had bootloop problem after flashing stock too you have to get to recovery anyway you can and format cache and data from there. As I know you can flash files through odin with your home-made USB jig. So there are some recovery zips that will boot into recovery directly after flashing them. You can either find one of them or you can ask someone to edit one of the recovery zips for you. The final way I can think about is adb. You can go to download mode with your USB and then you can use adb. Give adb this command. Adb reboot recovery and it will reboot to recovery. If I helped you in any case press the ? tnx button.
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
fahad999 said:
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
Click to expand...
Click to collapse
Try again to flash this
http://www.sammobile.com/firmwares/download/89343/G925TUVS4EPH2_G925TTMB4EPH2_TMB/
If it sticks on setup connection again, try a different usb port.
If after this it still bootloops try again to flash twrp and if this works wipe cache/dalvik.
If it doesn't work and just bootloops tell me of any errors you get during the process.
Thank you for the help! I hit the thanks button. I found out why Odin was stuck on setup connection and that was because I was using a bad USB cable, so I tried another cable. After that odin was not stuck on setup connection. Then I flashed stock firmware on Odin and now the phone works!. Thank you for the help!