Hi,
I need your help.
I am stuck in recovery mode.
I was in fast boot mode and I flashed recovery file for ICS and installed SU as per instructions.
I thought I have to disconnect the cable to go into recovery to install from SD Card and I did the same.
Now I have to get into fast boot mode to flash the original kernel.sin to get into normal mode.
Please help. I am stuck and I am trying to turn off the phone to get into fast boot.
Hold the power button and vol up for about 10 seconds, You will feel it vibrate...
Thanks a lot!!!
I was able to switch off the phone and was able to get into fast boot mode.
I flashed the kernel and I am able to see my home screen now.:good:
Have a Wonderful day/nite.:laugh:
sandydude said:
Thanks a lot!!!
I was able to switch off the phone and was able to get into fast boot mode.
I flashed the kernel and I am able to see my home screen now.:good:
Have a Wonderful day/nite.:laugh:
Click to expand...
Click to collapse
Glad i could help!
BUMP!
I'm having a similar problem. I managed to get the phone to fastboot mode, but when I wanted to flash the new firmware, Flashtool is stuck at the popup saying you need to unplug and replug the USB.
By stuck as in, there is no progress in Flashtool after I connected the phone in fastboot mode. Any help?
EDIT: Never mind. I tried to use a different Kernel again, and I managed to solve it. The one I use initially must be for GB.
Hi Guys,
After Updation my Xperia S is not Starting Up,
Can somebody tell me how to start it on ?
Related
Yo guys well it eventually had to happen someday. Well i will try to explain what exactly happenend.
I had the Sensation 5 Rom on my device. which means i was on 4.4.2 the CWM recovery is 6.0.4.7
yesterday i decided to flash back to the Revolution HD Rom which is 4.3 if im not mistaken... i didnt change the cwm recovery.
There were no problems while flashing and the Revolution HD Rom was working fine until today when i decided to boot into recovery Mode.
(My hardware PowerButton is defect thats why i took it out of my phone so yeah there is no Power Button on my S3)
Because i cant use the 3 button combo to get into Recovery i used the App quick boot and used the App to boot into Recovery mode.
Now from there on my Problem begins. The Samsung Logo appears then the phone boots into Recovery but only for roughly 1 second.
The only thing i can see is the circle with a hat in the middle (the logo) and the cwm version on the bottom before the phone shuts down and everything starts again...its kind of a bootloop only going into recovery mode for 1 second and then starting a new.
Which mena si CANT use recovery Mode and i ALSO cant get into Download Mode somehow... ive tried holding the Volume down button and Home button and everything but i cant get the phone into download Mode so yeah phone is stuck in that Bootloop which i explained above.
Do u guys think that a Usb Jig from Amazon would actually work getting the Phone into Download Mode? or is it a lost cause and i should start looking for a new phone? ^^
i would appreciate any answers a lot !
No one who can help? :/
sharaku18 said:
Yo guys well it eventually had to happen someday. Well i will try to explain what exactly happenend.
I had the Sensation 5 Rom on my device. which means i was on 4.4.2 the CWM recovery is 6.0.4.7
yesterday i decided to flash back to the Revolution HD Rom which is 4.3 if im not mistaken... i didnt change the cwm recovery.
There were no problems while flashing and the Revolution HD Rom was working fine until today when i decided to boot into recovery Mode.
(My hardware PowerButton is defect thats why i took it out of my phone so yeah there is no Power Button on my S3)
Because i cant use the 3 button combo to get into Recovery i used the App quick boot and used the App to boot into Recovery mode.
Now from there on my Problem begins. The Samsung Logo appears then the phone boots into Recovery but only for roughly 1 second.
The only thing i can see is the circle with a hat in the middle (the logo) and the cwm version on the bottom before the phone shuts down and everything starts again...its kind of a bootloop only going into recovery mode for 1 second and then starting a new.
Which mena si CANT use recovery Mode and i ALSO cant get into Download Mode somehow... ive tried holding the Volume down button and Home button and everything but i cant get the phone into download Mode so yeah phone is stuck in that Bootloop which i explained above.
Do u guys think that a Usb Jig from Amazon would actually work getting the Phone into Download Mode? or is it a lost cause and i should start looking for a new phone? ^^
i would appreciate any answers a lot !
Click to expand...
Click to collapse
Try to use adb to boot to recovery/dowload mode if not use usb jig.
tallman43 said:
Try to use adb to boot to recovery/dowload mode if not use usb jig.
Click to expand...
Click to collapse
well if i try adb the device isnt shown as connected because well the phone restarts every 2-3 seconds.
If there is still any other way wich it could work without a usb jig that would be awesome
ive found a thread over google which said something about sp tools and scatter files....looked like it was possible to change the files of the phone while it was shut down....Does somebody on here know if this is possible?
push
So yesterday I renamed the file app_process hoping that android well create another one after the reboot
I rebooted the phone waited a few seconds than i released that it's stuck
now I can't go to the recovery mode or the download mode because it reboots as fast as I enter either of them
when I remove the battery put it back, the phone auto boots without me pressing the boot button
My phone is rooted and the kernel is custom
Remove the battery and plug a charger in, try to access download mode while just on the charger.
If you are successful then flash a stock rom via odin.
I wish I stole my HTC M9.
tried it doesn't work :crying:
couldn't access the download mode
khaledalmosa said:
tried it doesn't work :crying:
couldn't access the download mode
Click to expand...
Click to collapse
Having the same problem..... help needed !!!!!
Thanks
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
PCruzio said:
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
Click to expand...
Click to collapse
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
987987ken said:
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
Click to expand...
Click to collapse
Hi Ken,
I have the similar problem like him, and the recovery mode was lost, i've try to flash a TWRP with Odin (twrp3000-20160207-p4.tar.md5) with AP button, it was PASS and restart, but still stuck in logo Samsung Galaxy Tab 10.1.
I don't know what to do, this is the 1st time i get this problem.
Need someone helps, thank a lot.
Hi guys! I have a huge problem here. I had the latest nightly release of CM13 installed but I wanted to come back to stock kitkat for the better use of battery. So I downloaded the V20j_620r.zip, wiped everything except sdcard on twrp and then installed the zip. Once rebooted the phone just reboot every 2sec on lg logo without giving me the chance to enter recovery/download mode (i tried every possible buttons combinations without results). I tried also to removing battery,sim and sd card, plug the phone to the pc which doesn't recognize it and having the phone stuck on the yellow triangle because it want to put the battery in. If I plug the battery in it goes on the charging logo but it doesn't have time to load the percentage of battery and after 2 sec it reboot again to lg logo constantly. I think that maybe it wanted to be repartioned before installing the previous version of android, but without giving me the chance to connect it to the pc I really don't know what to do now. If you have some advice, it is very appreciated.
Thanks
Do you try to flash KDZ in download mode? (when phone boot up hold volume up and put usb cable)
Boki11111 said:
Do you try to flash KDZ in download mode? (when phone boot up hold volume up and put usb cable)
Click to expand...
Click to collapse
you are my hero! didn't think about that! the phone entered in "firmware update" and was detected by the laptop thank you very much, I really don't know how to say thank you! You saved me!!!!
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.