Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
PCruzio said:
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
Click to expand...
Click to collapse
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
987987ken said:
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
Click to expand...
Click to collapse
Hi Ken,
I have the similar problem like him, and the recovery mode was lost, i've try to flash a TWRP with Odin (twrp3000-20160207-p4.tar.md5) with AP button, it was PASS and restart, but still stuck in logo Samsung Galaxy Tab 10.1.
I don't know what to do, this is the 1st time i get this problem.
Need someone helps, thank a lot.
Related
Hi guys, I have a Samsung Galaxy S Plus where, after flashing CWM with Odin, and installing cm11, I don't know why,I'm stuck on an infinite boot animation. But that is not the big issue. I need to enter Recovery Mode, where I have a backup, but the problem is that my Volume Up button is not working, so I can't use the Power Button and Volume Up(I also don't know what could possibly wrong with it, if you could help me also with that, it would be awesome ) one to get there. So I was wondering if there is some other method to enter Recovery, I suppose by computer. I think that when I used Odin, the device restarted being in Download Mode, and I think that it hasn't to be On to do that. I hope I'm not wrong.
Thanks
And sorry if someone already asked that
wg421tx said:
Hi guys, I have a Samsung Galaxy S Plus where, after flashing CWM with Odin, and installing cm11, I don't know why,I'm stuck on an infinite boot animation. But that is not the big issue. I need to enter Recovery Mode, where I have a backup, but the problem is that my Volume Up button is not working, so I can't use the Power Button and Volume Up(I also don't know what could possibly wrong with it, if you could help me also with that, it would be awesome ) one to get there. So I was wondering if there is some other method to enter Recovery, I suppose by computer. I think that when I used Odin, the device restarted being in Download Mode, and I think that it hasn't to be On to do that. I hope I'm not wrong.
Thanks
And sorry if someone already asked that
Click to expand...
Click to collapse
you have download mode working flash the stock rom of your divice via odin same as you flash cwm
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
techman20 said:
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
Click to expand...
Click to collapse
Did you ever find a fix for this ? Would of been a dam sight easier if there was rocker buttons on the side all it needs a cache and factory reset and it's fixed
techman20 said:
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
Click to expand...
Click to collapse
techman20, have you ever solved this? I ran to exact same issue and have been tried different methods for the past 2 days. I'm new to Android so need community's help.
Here is the current state of my device (GT-B9150 Samsung Homesync):
- In order to get root, flashed ROM MJ1 (TUR version), followed this thread: http://forum.xda-developers.com/showthread.php?t=2497102
- After flash the device got very slow so I figured I need to wipe the data and cache partition
- There is no volume key of the device so I use adb to reboot to recovery mode (debug mode has been enabled earlier), again there is no key so I didn't know how to select in the screen (should have use adb command as well, I was not that familar with adb), instead I put into the command rm -r /data, then the device dead
- After reboot the device stuck in the bootloop: I see samsung logo and homesync logo, NO adb connection (I think the debugging mode is not on)
- I tried flash a few other versions of the ROM and it does not working as well, all stuck same at the bootloop
I figured if I can wipe the data and cache partition after a fresh installation of ROM the device could be saved.
Here are a few path that I see can solve this:
Option 1: Get into recovery mode, but I don't know the key combination, also adb is not working so seems can not use command line either
Option 2: Since I'm able to get into download mode, I can use Odin to flash some sort of bootloader with adb function, so that I can later use command to get into recovery mode
Option 3: Complete wipe out the device, re-partition using Odin
Since I'm new I don't exactly know if any options here makes sense and what are the risk for each. Also I don't have the pip for option 3. Would be great if any expert here can shed some light on, it's been bothered me for 2 entire days at weekend.
Thanks,
Is there anyone can please help me with this issue, or provide some insights?
Thanks
wangxiao said:
techman20, have you ever solved this? I ran to exact same issue and have been tried different methods for the past 2 days. I'm new to Android so need community's help.
Here is the current state of my device (GT-B9150 Samsung Homesync):
- In order to get root, flashed ROM MJ1 (TUR version), followed this thread: http://forum.xda-developers.com/showthread.php?t=2497102
- After flash the device got very slow so I figured I need to wipe the data and cache partition
- There is no volume key of the device so I use adb to reboot to recovery mode (debug mode has been enabled earlier), again there is no key so I didn't know how to select in the screen (should have use adb command as well, I was not that familar with adb), instead I put into the command rm -r /data, then the device dead
- After reboot the device stuck in the bootloop: I see samsung logo and homesync logo, NO adb connection (I think the debugging mode is not on)
- I tried flash a few other versions of the ROM and it does not working as well, all stuck same at the bootloop
I figured if I can wipe the data and cache partition after a fresh installation of ROM the device could be saved.
Here are a few path that I see can solve this:
Option 1: Get into recovery mode, but I don't know the key combination, also adb is not working so seems can not use command line either
Option 2: Since I'm able to get into download mode, I can use Odin to flash some sort of bootloader with adb function, so that I can later use command to get into recovery mode
Option 3: Complete wipe out the device, re-partition using Odin
Since I'm new I don't exactly know if any options here makes sense and what are the risk for each. Also I don't have the pip for option 3. Would be great if any expert here can shed some light on, it's been bothered me for 2 entire days at weekend.
Thanks,
Click to expand...
Click to collapse
Anyone can please help me?
wangxiao said:
Anyone can please help me?
Click to expand...
Click to collapse
for boot loop you need to clean data and cache partition. To do that you need to go to recovery mode.
To do that, turn off the device , hold the power button. First you will see its power on, keep it pressed. And after 5s , you can home sync will rebooted to recovery.
Hi all, I know this is too old subject, but unfortunately I had my homesync flashed firmware through Odin and I did nand erase all, it is now stuck to Samsung homesync logo after booting. I know it is required wipe but how if no recovery is installed into the original firmware? any thought?
XperiaLover said:
Hi all, I know this is too old subject, but unfortunately I had my homesync flashed firmware through Odin and I did nand erase all, it is now stuck to Samsung homesync logo after booting. I know it is required wipe but how if no recovery is installed into the original firmware? any thought?
Click to expand...
Click to collapse
I did it too. Anyone can please help me?
Hi all.
Help me, I can't find PIT file for Samsung Homesync (GT-B9150).
Yo guys well it eventually had to happen someday. Well i will try to explain what exactly happenend.
I had the Sensation 5 Rom on my device. which means i was on 4.4.2 the CWM recovery is 6.0.4.7
yesterday i decided to flash back to the Revolution HD Rom which is 4.3 if im not mistaken... i didnt change the cwm recovery.
There were no problems while flashing and the Revolution HD Rom was working fine until today when i decided to boot into recovery Mode.
(My hardware PowerButton is defect thats why i took it out of my phone so yeah there is no Power Button on my S3)
Because i cant use the 3 button combo to get into Recovery i used the App quick boot and used the App to boot into Recovery mode.
Now from there on my Problem begins. The Samsung Logo appears then the phone boots into Recovery but only for roughly 1 second.
The only thing i can see is the circle with a hat in the middle (the logo) and the cwm version on the bottom before the phone shuts down and everything starts again...its kind of a bootloop only going into recovery mode for 1 second and then starting a new.
Which mena si CANT use recovery Mode and i ALSO cant get into Download Mode somehow... ive tried holding the Volume down button and Home button and everything but i cant get the phone into download Mode so yeah phone is stuck in that Bootloop which i explained above.
Do u guys think that a Usb Jig from Amazon would actually work getting the Phone into Download Mode? or is it a lost cause and i should start looking for a new phone? ^^
i would appreciate any answers a lot !
No one who can help? :/
sharaku18 said:
Yo guys well it eventually had to happen someday. Well i will try to explain what exactly happenend.
I had the Sensation 5 Rom on my device. which means i was on 4.4.2 the CWM recovery is 6.0.4.7
yesterday i decided to flash back to the Revolution HD Rom which is 4.3 if im not mistaken... i didnt change the cwm recovery.
There were no problems while flashing and the Revolution HD Rom was working fine until today when i decided to boot into recovery Mode.
(My hardware PowerButton is defect thats why i took it out of my phone so yeah there is no Power Button on my S3)
Because i cant use the 3 button combo to get into Recovery i used the App quick boot and used the App to boot into Recovery mode.
Now from there on my Problem begins. The Samsung Logo appears then the phone boots into Recovery but only for roughly 1 second.
The only thing i can see is the circle with a hat in the middle (the logo) and the cwm version on the bottom before the phone shuts down and everything starts again...its kind of a bootloop only going into recovery mode for 1 second and then starting a new.
Which mena si CANT use recovery Mode and i ALSO cant get into Download Mode somehow... ive tried holding the Volume down button and Home button and everything but i cant get the phone into download Mode so yeah phone is stuck in that Bootloop which i explained above.
Do u guys think that a Usb Jig from Amazon would actually work getting the Phone into Download Mode? or is it a lost cause and i should start looking for a new phone? ^^
i would appreciate any answers a lot !
Click to expand...
Click to collapse
Try to use adb to boot to recovery/dowload mode if not use usb jig.
tallman43 said:
Try to use adb to boot to recovery/dowload mode if not use usb jig.
Click to expand...
Click to collapse
well if i try adb the device isnt shown as connected because well the phone restarts every 2-3 seconds.
If there is still any other way wich it could work without a usb jig that would be awesome
ive found a thread over google which said something about sp tools and scatter files....looked like it was possible to change the files of the phone while it was shut down....Does somebody on here know if this is possible?
push
I think I have soft bricked my S2. Let me start by pointing out my home button does not work (not the best start!).
Any who I am able to get to download mode (Volume down and power) and flash an official firmware in Odin. However when the flash is complete and the phone reboots it enters a boot loop to the Samsung logo and round again. I am sure if I could get into recovery all I would need to do is wipe data and it would be fine however without a home button I am not sure how I can get to recovery.
Is there anyway I can get Odin to reboot the phone to recovery or at least get adb access from Odin? If I had adb I could "adb reboot recovery"
Any help welcome!
edit: Solved using guide from http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
So, i installed A LOT of custom roms on my gs3, and the last one screwed it up, so i got android 5.1.1 on my gs3 and when it tried to boot up (after optimizing apps stuff...) it just stopped at "Finishing Boot" and it stayed like that for couple of hours, then since i don't have a power button to enter download mode i made my own homemade usb jig and got my gs3 in download mode and i got it back to stock, then it stopped at samsung logo and it was just booting like that whole night. Then i tried diffrent versions of stock roms, kernels, even new pit file, still nothing. So i've read on couple of forums that i need to enter recovery mode and wipe data & cache(but odin does that automatically right ?) and i can't enter recovery mode cause i have a broken power button(and no i can't connect wires cause when i got rid of the power button i accidentally pulled out one of the connectors).So how can i enter recovery without a power button if i can't boot up the phone ? Or is there any other fix ? Or it's dead ?
P.S I can't take it to service no warranty + binary count is 14 and i can't reset it without my phone booted up.
No power, no phone. It's that simple. Fix the power button and then you can boot it up. No other way possible.
I wish I stole my HTC M9.
you could try thru usb then adb command: fastboot reboot recovery (if i remember correctly)
edit: just read you can't even turn it on
shivadow said:
No power, no phone. It's that simple. Fix the power button and then you can boot it up. No other way possible.
I wish I stole my HTC M9.
Click to expand...
Click to collapse
Phone worked 1 year without a power button and it worked just fine, that isn't the problem here...
hansonchen said:
you could try thru usb then adb command: fastboot reboot recovery (if i remember correctly)
edit: just read you can't even turn it on
Click to expand...
Click to collapse
How do i send adb command, since gs3 doesn't have fastboot mode only download mode, and adb commands are only available thru recovery mode...
mr.r0ot said:
How do i send adb command, since gs3 doesn't have fastboot mode only download mode, and adb commands are only available thru recovery mode...
Click to expand...
Click to collapse
go to this link:
http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
download the driver, install once while gs3 booted, then in download mode install the driver again - while phone is connected
i haven't been able to get a "fastboot devices" respond while in download mode, maybe i'm not doing it right
the driver supposed to support galaxy s3 international with adb and fastboot
hansonchen said:
go to this link:
http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
download the driver, install once while gs3 booted, then in download mode install the driver again - while phone is connected
i haven't been able to get a "fastboot devices" respond while in download mode, maybe i'm not doing it right
the driver supposed to support galaxy s3 international with adb and fastboot
Click to expand...
Click to collapse
I can't boot up the phone ... it stuck on samsung logo not even boot loop...
mr.r0ot said:
I can't boot up the phone ... it stuck on samsung logo not even boot loop...
Click to expand...
Click to collapse
installing the drivers only need any gs3 but since it's stuck on logo only, you can't do anything.
i thought you said you have a home-made jig to boot into download mode
Odin don't wipe data and cache automatically. I had bootloop problem after flashing stock too you have to get to recovery anyway you can and format cache and data from there. As I know you can flash files through odin with your home-made USB jig. So there are some recovery zips that will boot into recovery directly after flashing them. You can either find one of them or you can ask someone to edit one of the recovery zips for you. The final way I can think about is adb. You can go to download mode with your USB and then you can use adb. Give adb this command. Adb reboot recovery and it will reboot to recovery. If I helped you in any case press the ? tnx button.