Related
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
techman20 said:
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
Click to expand...
Click to collapse
Did you ever find a fix for this ? Would of been a dam sight easier if there was rocker buttons on the side all it needs a cache and factory reset and it's fixed
techman20 said:
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
Click to expand...
Click to collapse
techman20, have you ever solved this? I ran to exact same issue and have been tried different methods for the past 2 days. I'm new to Android so need community's help.
Here is the current state of my device (GT-B9150 Samsung Homesync):
- In order to get root, flashed ROM MJ1 (TUR version), followed this thread: http://forum.xda-developers.com/showthread.php?t=2497102
- After flash the device got very slow so I figured I need to wipe the data and cache partition
- There is no volume key of the device so I use adb to reboot to recovery mode (debug mode has been enabled earlier), again there is no key so I didn't know how to select in the screen (should have use adb command as well, I was not that familar with adb), instead I put into the command rm -r /data, then the device dead
- After reboot the device stuck in the bootloop: I see samsung logo and homesync logo, NO adb connection (I think the debugging mode is not on)
- I tried flash a few other versions of the ROM and it does not working as well, all stuck same at the bootloop
I figured if I can wipe the data and cache partition after a fresh installation of ROM the device could be saved.
Here are a few path that I see can solve this:
Option 1: Get into recovery mode, but I don't know the key combination, also adb is not working so seems can not use command line either
Option 2: Since I'm able to get into download mode, I can use Odin to flash some sort of bootloader with adb function, so that I can later use command to get into recovery mode
Option 3: Complete wipe out the device, re-partition using Odin
Since I'm new I don't exactly know if any options here makes sense and what are the risk for each. Also I don't have the pip for option 3. Would be great if any expert here can shed some light on, it's been bothered me for 2 entire days at weekend.
Thanks,
Is there anyone can please help me with this issue, or provide some insights?
Thanks
wangxiao said:
techman20, have you ever solved this? I ran to exact same issue and have been tried different methods for the past 2 days. I'm new to Android so need community's help.
Here is the current state of my device (GT-B9150 Samsung Homesync):
- In order to get root, flashed ROM MJ1 (TUR version), followed this thread: http://forum.xda-developers.com/showthread.php?t=2497102
- After flash the device got very slow so I figured I need to wipe the data and cache partition
- There is no volume key of the device so I use adb to reboot to recovery mode (debug mode has been enabled earlier), again there is no key so I didn't know how to select in the screen (should have use adb command as well, I was not that familar with adb), instead I put into the command rm -r /data, then the device dead
- After reboot the device stuck in the bootloop: I see samsung logo and homesync logo, NO adb connection (I think the debugging mode is not on)
- I tried flash a few other versions of the ROM and it does not working as well, all stuck same at the bootloop
I figured if I can wipe the data and cache partition after a fresh installation of ROM the device could be saved.
Here are a few path that I see can solve this:
Option 1: Get into recovery mode, but I don't know the key combination, also adb is not working so seems can not use command line either
Option 2: Since I'm able to get into download mode, I can use Odin to flash some sort of bootloader with adb function, so that I can later use command to get into recovery mode
Option 3: Complete wipe out the device, re-partition using Odin
Since I'm new I don't exactly know if any options here makes sense and what are the risk for each. Also I don't have the pip for option 3. Would be great if any expert here can shed some light on, it's been bothered me for 2 entire days at weekend.
Thanks,
Click to expand...
Click to collapse
Anyone can please help me?
wangxiao said:
Anyone can please help me?
Click to expand...
Click to collapse
for boot loop you need to clean data and cache partition. To do that you need to go to recovery mode.
To do that, turn off the device , hold the power button. First you will see its power on, keep it pressed. And after 5s , you can home sync will rebooted to recovery.
Hi all, I know this is too old subject, but unfortunately I had my homesync flashed firmware through Odin and I did nand erase all, it is now stuck to Samsung homesync logo after booting. I know it is required wipe but how if no recovery is installed into the original firmware? any thought?
XperiaLover said:
Hi all, I know this is too old subject, but unfortunately I had my homesync flashed firmware through Odin and I did nand erase all, it is now stuck to Samsung homesync logo after booting. I know it is required wipe but how if no recovery is installed into the original firmware? any thought?
Click to expand...
Click to collapse
I did it too. Anyone can please help me?
Hi all.
Help me, I can't find PIT file for Samsung Homesync (GT-B9150).
So, i installed A LOT of custom roms on my gs3, and the last one screwed it up, so i got android 5.1.1 on my gs3 and when it tried to boot up (after optimizing apps stuff...) it just stopped at "Finishing Boot" and it stayed like that for couple of hours, then since i don't have a power button to enter download mode i made my own homemade usb jig and got my gs3 in download mode and i got it back to stock, then it stopped at samsung logo and it was just booting like that whole night. Then i tried diffrent versions of stock roms, kernels, even new pit file, still nothing. So i've read on couple of forums that i need to enter recovery mode and wipe data & cache(but odin does that automatically right ?) and i can't enter recovery mode cause i have a broken power button(and no i can't connect wires cause when i got rid of the power button i accidentally pulled out one of the connectors).So how can i enter recovery without a power button if i can't boot up the phone ? Or is there any other fix ? Or it's dead ?
P.S I can't take it to service no warranty + binary count is 14 and i can't reset it without my phone booted up.
No power, no phone. It's that simple. Fix the power button and then you can boot it up. No other way possible.
I wish I stole my HTC M9.
you could try thru usb then adb command: fastboot reboot recovery (if i remember correctly)
edit: just read you can't even turn it on
shivadow said:
No power, no phone. It's that simple. Fix the power button and then you can boot it up. No other way possible.
I wish I stole my HTC M9.
Click to expand...
Click to collapse
Phone worked 1 year without a power button and it worked just fine, that isn't the problem here...
hansonchen said:
you could try thru usb then adb command: fastboot reboot recovery (if i remember correctly)
edit: just read you can't even turn it on
Click to expand...
Click to collapse
How do i send adb command, since gs3 doesn't have fastboot mode only download mode, and adb commands are only available thru recovery mode...
mr.r0ot said:
How do i send adb command, since gs3 doesn't have fastboot mode only download mode, and adb commands are only available thru recovery mode...
Click to expand...
Click to collapse
go to this link:
http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
download the driver, install once while gs3 booted, then in download mode install the driver again - while phone is connected
i haven't been able to get a "fastboot devices" respond while in download mode, maybe i'm not doing it right
the driver supposed to support galaxy s3 international with adb and fastboot
hansonchen said:
go to this link:
http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
download the driver, install once while gs3 booted, then in download mode install the driver again - while phone is connected
i haven't been able to get a "fastboot devices" respond while in download mode, maybe i'm not doing it right
the driver supposed to support galaxy s3 international with adb and fastboot
Click to expand...
Click to collapse
I can't boot up the phone ... it stuck on samsung logo not even boot loop...
mr.r0ot said:
I can't boot up the phone ... it stuck on samsung logo not even boot loop...
Click to expand...
Click to collapse
installing the drivers only need any gs3 but since it's stuck on logo only, you can't do anything.
i thought you said you have a home-made jig to boot into download mode
Odin don't wipe data and cache automatically. I had bootloop problem after flashing stock too you have to get to recovery anyway you can and format cache and data from there. As I know you can flash files through odin with your home-made USB jig. So there are some recovery zips that will boot into recovery directly after flashing them. You can either find one of them or you can ask someone to edit one of the recovery zips for you. The final way I can think about is adb. You can go to download mode with your USB and then you can use adb. Give adb this command. Adb reboot recovery and it will reboot to recovery. If I helped you in any case press the ? tnx button.
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
PCruzio said:
Hi. I'm new here, and I really need help!
It started today when I'm tired of a disaster lagging using android 5.1.1 rom on my Galaxy tab 10.1 (GT-P7500).
So, I decided to flash a stock rom to go back to honeycomb 3.2
And basically, a volume down button on my tablet is broken. so I won't be able to reboot in recovery mode.
I tried reboot in download mode by pressing power + volume up button but it won't work either.
Then I managed to reboot in download mode and use Odin to flash a rom by using adb cmd but I didn't boot to recovery mode and wipe data/factory reset first(I don't know if this has something to do with this problem.)
And that brought me to a dead end problem.. Stuck at the logo while booting up. :crying:
I don't really know what else to do or is there some hope with this situation. I plugged a usb to my pc while in logo screen and it showed up as SAMSUNG_Android so when I check by typing adb devices in command it's there but can't get it to work since adb required debugging mode.
I think I will probably end up order a new button for replacement but I feel like I should ask a professionals first.
Click to expand...
Click to collapse
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
987987ken said:
Can you flash a TWRP recovery with Odin now? TWRP can support touch screen.
Click to expand...
Click to collapse
Hi Ken,
I have the similar problem like him, and the recovery mode was lost, i've try to flash a TWRP with Odin (twrp3000-20160207-p4.tar.md5) with AP button, it was PASS and restart, but still stuck in logo Samsung Galaxy Tab 10.1.
I don't know what to do, this is the 1st time i get this problem.
Need someone helps, thank a lot.
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
fahad999 said:
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
Click to expand...
Click to collapse
Try again to flash this
http://www.sammobile.com/firmwares/download/89343/G925TUVS4EPH2_G925TTMB4EPH2_TMB/
If it sticks on setup connection again, try a different usb port.
If after this it still bootloops try again to flash twrp and if this works wipe cache/dalvik.
If it doesn't work and just bootloops tell me of any errors you get during the process.
Thank you for the help! I hit the thanks button. I found out why Odin was stuck on setup connection and that was because I was using a bad USB cable, so I tried another cable. After that odin was not stuck on setup connection. Then I flashed stock firmware on Odin and now the phone works!. Thank you for the help!
Hi Community,
I read some posts how to fix my Problem, but i cant go to a service Point.
So I was using the Evolution X for a long Time (Installed with TWRP 3.1.0).
And now i wanted to change to the Nusantara Project (Vanilla), I did a clean Flash, everything worked i could access the System.
Than i had problems installing Play Store, so i rebooted into Recovery via the System. But now im Stuck in the Loop.
Can i Somehow connect my Phone to the PC and Reset?
Can someone tell me if i Hard/soft bricked my phone ?
Just a little advice, would be really appreciated.
Thanks a lot
Go to TWRP, wipe system, cache, data and dalvik. Now flash nusantra and whichever GApps are recommended for it (if there are no recommendations then use OpenGApps, make sure the architecture is correct). Now wipe dalvik and restart. Sometimes, certain roms begin to bootloop if you boot into the rom first, then try to install gapps later.
If you still have issues, just reflash the stock rom.
I cant access the TWRP anymore, im just stuck on the Bootloader, no matter how i turn on The Phone (Volume Up + Power ON ), (Volume Down + Power), (All 3 Buttons)
Nothing works anymore i dont understand ....
Im searching the net but i cant go to fastboot or something else, its just keeps on rebooting ...
So it's bootlooping, but you cant access recovery?
When the screen turns off, press the key combo and it should go to recovery.
Your best bet is to take it to a service centre, but if that really isn't possible for you, then wait for its battery to drain completely, then when you plug in the charger, instead of turning the phone on, press the key combo to enter the recovery. From there, wipe and flash some other OS.
I've also heard that certain versions of TWRP don't support some roms, leading to a bootloop. In that case, you'll have to use orangefox recovery to flash the rom (orangefox is flashable via twrp)
Yes its Bootlooping.
When i turn it on, on the Left Corner "Recovery Mode" blinks for one second. Than the usual Text appears:
"Orange State
Your Device has been unlocked and cant be trusted
Your Device will boot in 5 Seconds".
So after a couple of seconds (around 10-20 sec)
It turns off and immediately on again. I Just can turn it OFF when i hold all 3 Buttons.
Than i try starting it with Volume up + Power / Volume down + Power, But i cant access Recovery or TWRP.
So i should wait til the battery gets low and try it again ?
Like i said, my custom Rom (Evolutionx) and TWRP just worked fine. I dont know man ...
Well since your bootloader is unlocked, try flashing the stock rom again. Look for a tutorial and follow it.
Hi I managed to unbrick my device with this guide, and im back on a stock rom
Unbrick
i ran following commands to get to my custom rom:
I run adb reboot bootloader,
add executed following commands.
(Pitch Black recovery 3.1)
- adb reboot bootloader
- fastboot flash recovery recovery.img
-fasboot reboot recovery
It just hang up and booted after a while into the normal system.
But im not able to get to the recovery menu ?
When I restart and hold Volume up + Power, i go in a loop and the phone keeps restarting over and over again.
what have i Fu**ed up ?
Do i need another recovery tool ?
sorry guys, i appreciate your help a lot tho !
EDIT: Is my bootloader unlocked ?
I can access via "adb reboot bootloader" the phone
and on the blackscreen on the phone it is written:
oppo verfiy pass
fastboot_unlock_verify ok
Update:
So i tried some Stuff and i got Red State. No Problem i Unbricked it once again and now im on Stock Android 10.
Now im Trying to enable the bootloader again.
I downloaded the In Depth Test_Realme_6.apk but i keep getting the Error that i should update the system.
So should i update the system ?
I cant find a CURRENT Tutorial to make this work, please help...
If you cant find a tutorial for your version, why not downgrade back to a previous one if possible.