hey i downloaded the latest baseband for x10i from xda!! i tried to flash it with x10 flasher ver 2.4! but after i flashed it......i restarted my fone n all i get is no network n no multitouch....n when i went into settings....the baseband column showed 'unknown'! n when i tried to flash the official sony firmware! the SE companion is showing there r no updates for my fone(went to repair option!)
can anyone please help me? thnak you!
after this i tried to flash it with the .435 baseband file....n after than my fone is continously booting! (boots again after the SE logo) plz someone help!!!! very worried
Run seus, not PCC.
hey thanks for the reply but when i tried it from seus....it say u have the latest software n cant be updated! i have done such a stupid thing!
my phone is not starting! is there any other thing i can do?
can i download and install the android 2.1 firmware from xda n flash it with x10flasher?
wil it help?
neerajk said:
hey thanks for the reply but when i tried it from seus....it say u have the latest software n cant be updated!
Click to expand...
Click to collapse
So it doesn't have an "install anyway" button? try the flashtool if not.
ok....can u send me a link for the flashtool-2.1 rom(i am from india-so rogers,nordic wil help me)
Related
after flash to the newest firmware which is .435 , i have no signal at all, then i tried the 2.2, then 2.3, still no signal service, then i go to JIT, and format the system which i thought it going to be back to the original again, after that, i reboot, the only thing i see is the logo "sony erricson" and it keep stay there............
did i brick my phone?
how am i going to solve this?
please help!
Wrong forum. Fix it thru Seus
goku16 said:
after flash to the newest firmware which is .435 , i have no signal at all, then i tried the 2.2, then 2.3, still no signal service, then i go to JIT, and format the system which i thought it going to be back to the original again, after that, i reboot, the only thing i see is the logo "sony erricson" and it keep stay there............
did i brick my phone?
how am i going to solve this?
please help!
Click to expand...
Click to collapse
Sent from my ARCified X10 with CM7 RC1 2.3.3 Gingerbread
download original 2.1 from xda and try flashing it using flashtool which you can find in this forum. or connect your phone to your pc or mac and try repairing it through SEUS.
SEUS, is only updating the phone which it always said i already have the latest sofwarre (((((
goku16 said:
SEUS, is only updating the phone which it always said i already have the latest sofwarre (((((
Click to expand...
Click to collapse
Yes but install anyway.
Sent from my ARCified X10 with CM7 RC1 2.3.3 Gingerbread
Make sure u flash the firmare for x10a or x10i, whichever phone u have. Download the correct firmware and use bin4ry's tool to flash. I hope this helps
Sent from my X10 using XDA App
there's no other option, it just say already have the lastest, the the button exit-.-
btw, i just tried to flash using flashtool 0.2.6 and there a triangle error above the phone?
please help!
MNA1 said:
Make sure u flash the firmare for x10a or x10i, whichever phone u have. Download the correct firmware and use bin4ry's tool to flash. I hope this helps
Sent from my X10 using XDA App
Click to expand...
Click to collapse
originally, it's x10a.. i chose the latest one which is 435, now i ll try the 504, hope this works
you can download the original firmware from this link
http://forum.xda-developers.com/showthread.php?t=683793
flash it with flash tool
enjoy..........
The reason you didn't had network signal may be that not all roms work with all basebands, so it could have been rom related. Have you also waited till the rom rebooted a few times?
hi,
guys.. i think i bricked my phone and it goes like this i will say it from the very start happening.
first, im using EWjet firmware quite a while and it ver 2.3.3 base 71 and it working fine just that battery ran out very fast, so i decieded wanna to change to another firmware so i saw this MIUI prime firmware it seem not bad so i wanna give a try. so i follow the instruction about the first time and than i find out that my ver and base 71 still can go install the firmware, so i downloaded and install, but who knows once i install and i reboot and it stuck at bootloader with the SONY ERICSSON sign in the middle of my phone screen and i tried go to recovery and it seem can't go through and it stuck so i think i bricked my phone. after this bricked i did go try the pc companion to repair my phone it not working and it say download error. and i also think tried flash with kernel downgrade and upgrade it not working too. PLEASE EXPERT HELP ME.
XxMakerxX said:
hi,
guys.. i think i bricked my phone and it goes like this i will say it from the very start happening.
first, im using EWjet firmware quite a while and it ver 2.3.3 base 71 and it working fine just that battery ran out very fast, so i decieded wanna to change to another firmware so i saw this MIUI prime firmware it seem not bad so i wanna give a try. so i follow the instruction about the first time and than i find out that my ver and base 71 still can go install the firmware, so i downloaded and install, but who knows once i install and i reboot and it stuck at bootloader with the SONY ERICSSON sign in the middle of my phone screen and i tried go to recovery and it seem can't go through and it stuck so i think i bricked my phone. after this bricked i did go try the pc companion to repair my phone it not working and it say download error. and i also think tried flash with kernel downgrade and upgrade it not working too. PLEASE EXPERT HELP ME.
Click to expand...
Click to collapse
Ewjet MIUI etc are ROMs not firmwares. If pc companion or seus don't work then search for flashtool and use this to install global generic firmware. This will put ur phone back to how it was when u first got it
Sent from my X10i using XDA App
laneyofdeath said:
Ewjet MIUI etc are ROMs not firmwares. If pc companion or seus don't work then search for flashtool and use this to install global generic firmware. This will put ur phone back to how it was when u first got it
Sent from my X10i using XDA App
Click to expand...
Click to collapse
hey laneyofdeath thanks for help and one more question where can i find this global generic firmware and after i flash it back. can i still able to rooted to MIUI rom again?
XxMakerxX said:
hey laneyofdeath thanks for help and one more question where can i find this global generic firmware and after i flash it back. can i still able to rooted to MIUI rom again?
Click to expand...
Click to collapse
hey laneyofdeath i got it THANK you very much!
XxMakerxX said:
hey laneyofdeath i got it THANK you very much!
Click to expand...
Click to collapse
No probs buddy
Edit: Also yeah u will need to start from beginning again though do u have backup (titanium or similar?). If not, you will have to re-install all apps from market.
Sent from my X10i using XDA App
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
xp3rto said:
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
Click to expand...
Click to collapse
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment CWM3_for_xReC.zip Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
nightwing369 said:
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment 867933 Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
Click to expand...
Click to collapse
Opps em extremely sorry
i tried going in the xrecovery many time ! but the phone dosent go ! well actually this isnt my phone , it it my friend's phone , i own a samsung galaxy note !
Any ways thanks for your help !
ill try what u said
thanks again
s0ftcorn said:
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
Click to expand...
Click to collapse
No i didnt try SEUS !
xp3rto said:
No i didnt try SEUS !
Click to expand...
Click to collapse
do it? you will loose your data but... your phone should work again.
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
OKay thanx
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
ill give this a try too ! thanx
xp3rto said:
ill give this a try too ! thanx
Click to expand...
Click to collapse
ok.. i fixed on my x10mini pro with stock rom flas via flash tool
but if you will again flash some custom rom.. don't touch kernel if you didn't unlock bootloader
you can try later flash some custom rom that doesn't need custom kernel
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
i cant find seus ! can you please give me a link from which i can download it ! thank you
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
xp3rto said:
i cant find seus ! can you please give me a link from which i can download it ! thank you
Click to expand...
Click to collapse
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
but I never use that.. only flash tool
matthias1203 said:
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
Click to expand...
Click to collapse
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
basically you need to read the instructions how to install the rom
xp3rto said:
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
Click to expand...
Click to collapse
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
matthias1203 said:
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
Click to expand...
Click to collapse
x10 mini pro
s0ftcorn said:
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
Click to expand...
Click to collapse
can u give me instructions how to use the sues
Done
Thanks all of u !! i am very great full to u my phone works now
I have already tried 2-3 kernels but still wifi not working.. i dont no wat went wrong.. Pls someone provide me with a solution..
My current kernel is 2.6.32.9-perf [email protected]#19.. Pls help.. Also pls provide me with a solution with which i can update my software via sony pc companion.. Ryt nw it shows dat i cn update but after downloading everything it shows that software is modified and couldn't be updated..
Sent from my WT19i using Tapatalk 2
The reason it says that software is modified is because you have unlocked your Bootloader.:silly:
You just have to relock it!
Here is a tutrial that tells you how ta do that.
http://androidflip.com/re-lock-boot-loader-xperia-arc-step-step-guide/
Just download the containing file and flash it via flashtool.
And then fix by PC companion or update service.
Press thanks if I helped!
I have a problem with my mobile...
I have Sony Xperia P, it is rooted and the USB is not working...
I am trying to install the official version which is not rooted!
It shows me the Update 6.2.A.0.400 which I download and when I try to install it it reboots and starts to install.
In the middle of the install it stops and boots into my old OS and shows me that the update couldn't install...
Can you help me install it?
maybe the update is not fully downloaded !?
try to fix the usb to use Flashtool ,,,,, it is great !
Hope i helped
Waelhh90 said:
maybe the update is not fully downloaded !?
try to fix the usb to use Flashtool ,,,,, it is great !
Hope i helped
Click to expand...
Click to collapse
I want to unroot my phone so that I will send it back to fix my USB!
If the phone is rooted, I can't send it for RMA...
MMMMM i see
if u have CMW u can flash unrooted kernel
Waelhh90 said:
MMMMM i see
if u have CMW u can flash unrooted kernel
Click to expand...
Click to collapse
I forgot to mention that I haven't installed it...