[Q] No launcher. Need to enter in settings. - Optimus One, P500, V General

Well guys actually I did a kind of a mess. I dumped the original recovery when I bought the phone and today I flashed it back just to see if the backup was fine (I was researching the yaffs filesystem and the dump seemed strange, phew).
Well it was. I didnt knew that original recovery would delete installed apks as well as settings etc, without even asking.
So now the phone is booting fine, stock recovery, stock system but no launcher cos I deleted LG Home (how stupid).
Is there a way to open the settings? That way I can enable usb debug mode and use adb shell.
Any help is much appreciated, and sorry if this was already asked but I did not know what to search for this specific case.
PS: LG tools arent helping. The updater keeps telling me the system is updated and refuses to flash it. Even the recovery mode of the tool acts the same (Did they even know the difference between update and emergency recovery?)
PS2: I hope to solve this problem before LG releases Gingerbread lol
Thanks in advance!
EDIT:
Well I found it was easier to flash a stock rom with KDZ Software Update. I couldnt wait. Worked like a charm. Sorry for filling forum database with auto answered question.
Just an advice, get rid of that damn stock recovery and never go back!
This thread can be closed, deleted. Thanks.

Related

[Q] 2.2.1 - complications on downgrade and root.

Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
This shows what happens when I try reading the phone on KDZ... also a little part showing that I got my device to be recognized by windows...
also disabled the LGE modem on device manager, read that if I don't it'll get bricked.
Well it won't let me link the image so... just paste the name together.
www
novasite.com.br
/1.jpg
1. Find a suitable v2.2 stock ROM for flashing (link)
2. Use KDZ to flash it (I am not aware of another tool capable of doing that). Try doing that on a PC running Windows XP (important - that's where you're stuck now and I guess you're using Windows 7).
3. Root your phone - search for "z4root" on Market, install it.
4. Install Custom recovery, which will replace your current (stock) recovery mode (link - you may need to create an account on another forum in order to download).
5. Using Custom recovery you can now install any custom ROM and create nandroid backups to restore your phone to a certain (working) state.
You will have to use KDZ again if you ever want to flash a stock ROM, also losing the custom recovery. But you will have no reason to do that, except if you need to take your phone to some warranty repairs.
Good luck!
NEW PROBLEM: About step 1... i finally found a way to get my country's rom, but... it's.. the same thats on my device right now, it says V10a_02 and thats the same on my phone (the kdz read phone tells me that) so... won't I just be flashing the same 2.2.1 again?
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500H/ABRABK/V10A_02/V10A_02.kdz <---- the rom the topic tells me to get.
How do I know what version of android is in that rom? and if i can't, can you link me to a rom that does?
I found one from another country that the guy said is 2.2... but... will it work if i flash that one? does it HAVE to be for my country? also my model is p500h (the h) is it different from the p500 (different as in flashing p500 without h roms on it will kill it?)
As for flashing it...
I think maybe a computer with win xp will do the trick for kdz.
i've found this post today:
http://forum.xda-developers.com/showthread.php?t=944881
is it better to use that than kdz? theres no replies on topic saying "hey it worked" so i'm a little worried, but apart from a few errors it seems to work on my win 7....
i guess the reply would be "i only know kdz, do it with kdz" but i thought i might ask...
Indeed, I have not tried that method and therefore I can't recommend it. At least KDZ is successfully tested. If you are patient enough to wait for some replies either here or in that topic, you may find out if it works. I would recommend it only if you have no other choice, like if you're unable to try KDZ on an XP machine.
In the mean time, I remembered that a newer version of Custom recovery is available (v1.2) - here. But you still need to download a file and read the tutorial from that other forum I mentioned in the previous post.
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
edumazieri said:
Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
Click to expand...
Click to collapse
First backup your data, then download a factory ROM, it doesn't matter which version u download, what matters is the version. Make sure that it's 2.2 and not 2.2.1 or 2.2.2. Follow all the below steps without skippin any, no matter how simple or stupid they are.
Link for shipped ROM - http://forum.xda-developers.com/showthread.php?t=865479
Now download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they was not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Now Root it via Z4root - http://forum.xda-developers.com/showthread.php?t=833953
Then install custom recovery - http://forum.xda-developers.com/showthread.php?t=844483
Then download n flash any ROM of your choice, I wud sugget install Void or LOL.
Edit :- By the time I replied, many have already replied. Anyways you can check my reply too :-D
Mithun.
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
edumazieri said:
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
Click to expand...
Click to collapse
Yes.... you can choose any country. I tried the Australian version. Use the below one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AAUSBK/V10a_00/V10A_00.kdz
edumazieri said:
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
Click to expand...
Click to collapse
As far as my knowledge goes, the LG P500h you have is the same phone as the P500, only branded for Telus. The hardware should be identical, therefore you may use any ROM designed for the P500 family.
The only thing you may miss if you install a ROM not customized for a Brasil (or South America) network operator is the internet acces point name, thus rendering your phone unable to acces the internet trough its data service connection, but only trough WiFi. Nevertheless, the phone's APN can be configured manually, all you need are the correct settings from your mobile operator and you're good to go.
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
edumazieri said:
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
Glad that it worked Install the Amon_RA's recovery!!! Many ROM's for OO won't support clock work I suppose. Amon RA's recovery is neat, I've been using that from the time I had an HTC tattoo.
For your Custom Recovery.... http://androidforums.com/getitnowma...ry-optimus-one-p500-thunderg.html#post1896517
edumazieri said:
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
You can do anything you need with ThunderG. Now that version 1.2 supports backup and restore of ext4 partitons (a feature you don't need if you don't plan on installing a custom ROM... but you will, eventually ), it is complete.
Moreover, in ClockworkMod's first topic says: "This recovery will not allow you to flash every ZIP file". ThunderG does, if you choose to allow flashing of unsigned zip files. Sometimes this is useful.
Peeeeeerfect
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Simple as that =D
Although there are some criteria with the sd card or you'll get unmounting problems.
Use a class 4 or higher card
format with fat32
I've never officially tried this method but its apparently supposed to help
allocation unit size: 64kb when you're formatting
edumazieri said:
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Click to expand...
Click to collapse
So, how does it goes?!
I´m brazilian too, got a brand new LG Optimus One from ViVo, and a want to know if you´re having any troubles with conections, calls, internet, 3G etc.
OK, id did the flash
I´m afraid that if flash any custom rom, it will break or cause any misfuncition of the 3g service.
Any idea?!
== Updated
Ok, I´ve flashd it with KDZ and the log show´s thats all ok
"14:34:45 : ===FINISHED=== "
BUt its taking like FOREVER to start... almost 30min on android screen. Is this normal?! Should i restart the phone?!
leave it some more time , try shaking it ...
shake trick sometimes helps
Help please..
I did as instructed in the step to step procedures. kdz posted finished but my phone is still at the yellow screen..i did shaking but nothing happens..Is this normal?..SHould i wait..

Stock Recovery Needed For ZTE Avail 2 (Z992 - AT&T)

I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Stephen Wayne Hamilton said:
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Click to expand...
Click to collapse
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
drago10029 said:
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
Click to expand...
Click to collapse
If needed, I could back up my /system folder and send it to you.
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
it's alright man. someone on android forums has already made a custom ROM. so the ball is rolling on out weak old device :laugh:
build.prop?
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
did you ever get around to doing this? there is supposedly a stock image on androidforums but when I opened the Zip, all it had was the stock apps, no build.prop, which I think I blew away with xblast (xposed plugin). now I hang on the boot screen image. there is a stock Rom for the z993 our there, which I suppose I could use, because they are supposed to be the same phone, just different carriers... but then I need to get the at&t apn's and it is just a PITA. so if you could post /system backup or just a stock build.prop, that would be great!
(I'd post links to these rooms but I guess I'm too new of a member... I can provide them if needed.)
I'm way late on this, but just thought I'd post to say that I no longer have the device, and I was never able to fix it.In any case, I hope the rest of you guys get it fixed. It seemed to be a halfway decent phone, although a bit sluggish at times. But beyond that, with all the bloat removed, I'd say it ran pretty well for the duration of time that I had it (less than a month). I currently have a GNote 3 (T-Mobile) and a GNote Pro 12.2" now and it's just awesome, I'm really loving them.
Sorry, accidental double-post (can't figure out how to delete this post, the "Edit/Delete" button doesnt appear to have any option to entirely delete a post).
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
alirezayami said:
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
Click to expand...
Click to collapse
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
alirezayami said:
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
Click to expand...
Click to collapse
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
AlexZap said:
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Alex
I would highly appreciate if anyone tell me what ADB Driver I should use for ZTE Z992. I almost understood all the procedure in the links but now the problem is despite I tried different ADB Drivers, but still ADB reboot-bootloader boots phone again in Normal bootloader.
Also Fastboot devices command does not see the phone, while ADB Devices command see it.
Seems bootloader is locked. Right? What should I do?
This is the method I used when I rooted my avail2 :
http://androidforums.com/zte-avail-2-zte-prelude/821217-how-root-zte-avail-2-z992-guide.html
The author (and I) just used the included drivers from zte that come with the phone. From what I remember, fastboot worked fine. Just hold the volume down button then turn the phone on. It will seem to lock on the start screen, but this is the bootloader. Then connect your cable and try your fastboot commands.
If you are already rooted, you can just download the package here
http://androidforums.com/prelude-all-things-root/797487-cwm-recovery-installer-zte-prelude.html
And skip the middle section, using the impactor to root (13 and 14).
Depending on what's wrong with your phone, you could also try just using the stock recovery and doing a system reset there. It will wipe any bad custom settings, but if the rom is still viable it might get you up and running again. It got me out of a bootloop without re-romming the whole thing. And with titanium backup or system app mover you can reinstall anything you need in the system partition.
*edit - Damn kindle auto correct
Sent from my KFTHWI using Tapatalk
A bit to much fiddling resulted in disaster
Hello XDA forum users,
I'm about ready to toss this phone in the trash. I have an AT&T Avail 2 with model number z992, which is apparently manufactured by a company called ZTE. First I think it would be helpful to explain what I've done to the phone and perhaps others out there can tell me if I've destroyed the phone or if it can be fixed.
A friend of mine sold me the phone for 10 bucks, its in great condition which is why its such a shame that it seems perma-bricked. I have no need for the phone aspect of the device, I simply wanted to "convert" it to a handheld media/application player, like an ipod or tablet for example. The phone comes with several bundled software applications that I find completely useless and wanted them removed, EX. AT&T Navigator and other AT&T software, plus a bunch of google applications.
The first thing I did when I decided to try and customize it was to use Kango's root tool which worked and rooted the phone. I was all excited that it worked and continued by installing the Super User application which allowed me to gain full control over the device. (I should have stopped there.) After the successful phone root I then installed a 3rd party app called NoBloat and used its uninstall options to remove a lot of stuff. I couldn't tell you exactly what all was removed but looking back, it must have been more important than I realized at the time. I know I took out all the AT&T software, then all the Google stuff to, which destroyed the play store. I didn't take out anything that seemed like a system file but apparently the Google stuff is the system files. The phone still worked in this state but it was erratic and things like Contacts would crash even if it was not running. So I considered that a failed attempt and commenced to do a factory reset using the recovery menu (Vol Up + Menu Key + Power button) but the factory reset didn't work, well not like it was supposed to. I had used the restore option before and it made the phone work like it was brand new. Now when the phone is powered on it will boot to the initial setup and ask me to choose a language, then it will get as far as the wireless connection screen (sometime not even that far) and the phone reports that "Unfortunately, Setup Wizard has stopped." and then I tap OK and the setup wizard restarts at the language screen. This is the state it is in now and I do not know how to fix it, I'm beginning to think there currently is no method to fix this.
Things I've tried so far include installing minimal ADB-Fastboot to try and sideload various ROM images, the ones I found here and other places. The phone is not recognized by Windows 7 though and the ADB does not work like it did on a motorola phone I did this to before. I've also purchased an inexpensive 8GB microSD chip with an adapter so I could put the ROM info on that and tried the "Update from external storage option" and that seems like it would work but none of the ROM's I've used will install. I guess because there is some kind of security feature built into the phones hardware which checks the data files for specific tags/sizes and therefore won't accept any of the ROMS I've tried.
There is no means to access the old file system anymore like most guides show, I do not have any CWM's installed nor any backup data whatsoever. It's been reset and now it seems the data it used to restore itself is, while not completely missing, damaged and will not reload anymore. All the guides I've read or watched usually show the user in the operating system or using software on a PC to type out commands. None of that works on this phone though, the phone as I just described it is basically bricked. Is there anything that can fix this, or is the phone a paper weight now? A functional ROM image from AT&T seems unlikely as they have absolutely no relevant information about this on the commercial website and the help and support seems like it's setup for old people who don't understand technology at all. If anyone out there has experience with issues like this then by all means let me know. If more information is necessary then I will be glad to provide it if available.
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Britton Burton said:
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Click to expand...
Click to collapse
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commands
adb.exe push cwm-z993.img /cache
adb.exe shell "su -c 'dd if=/cache/cwm-z993.img of=/dev/block/mmcblk0p17'
This should flash cwm if your phone is rooted and adb shell is working.
Sent from my KFTHWI using XDA Premium 4 mobile app
AlexZap said:
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commandsp
Click to expand...
Click to collapse
I have not come across that particular file yet, I did try to google it and the only results it had were two and one of those was this post. Would you mind telling me where I might find a copy of the kaw202_recoverflasher.zip?
I managed to find the zip you were talking about and have downloaded it, for anyone else looking for it. I am unable to post links but I would have linked to the files you mentioned. For others looking for the same zip file search for "CWM Recovery Installer ZTE PRELUDE". That's the title of the thread I found the file on that Alex mentioned above. The instructions on the page don't seem like they apply to the situation I'm stuck in but I'll give it a whirl anyway and see if the files work.
If this forum is like the others I've read through so far then there is no real answer to the issue. The phone seems kind of new and not many of the power users on these forums use rinky dink phones like this one. You guys all have the 600 dollar models I guess. What bugs me about this this phone and the state I managed to put it in, is that the damn thing was programmed the first time when it was made. So it seems to me like there should be a way to reprogram the phone the same way the factory did it. Think about it, when they make the phones they don't have any information on the phone at all. It's completely empty, so there must be a way to load the software for the phone even if the phone has no data at all in the main storage. If the files in the recovery flasher.zip file work then I'll post back the results but if it's like the other files I've messed around with (which didn't do anything) then I'm throwing it in the trash can.
Anyway thanks for your response and for pointing me in a different direction Alex
---------- Post added at 09:15 PM ---------- Previous post was at 08:39 PM ----------
HELL YEAH!!! It worked thank you Alex, ​
I would have never figured this out without your help! The phone now has a version of CWM on it and the recovery menu is different. I just tried to install a ROM and it said successful. After the phone rebooted went back to the setup screen from ZTE but it still did the same thing. However this is progress and I should be able to "wander in the dark" and figure out a way to use the CWM to install a completely new rom. Any recommendations on a ROM to use for the z992?
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Britton Burton said:
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Click to expand...
Click to collapse
ze
Glad I could help, but none of the work was done by me, the guys over at android central did all the heavy lifting, I just pointed you in the right direction. I have a stock system e m image around here somewhere if you need it, tho installation will be a bit more complicated. If azazels rom ever gives you issues, ill dig it up and try and help you install it.
Sent from my KFTHWI using XDA Premium 4 mobile app

Data recovery HELP - Bricked phone

Sorry for the duplicated post. I just noticed the other one i posted is in the wrong section and this is the one for the AT&T phones so here it is again.
Hi Guys. Today i rooted my phone for the first time (LG Optimus G e970)
Everything went well, then i uninstalled the bloatware from AT&T and a few of the google apps that i do not use like books or music, and on the next reboot i got my phone bricked with the LG loop and "Security Error" message.
I found some great info on these forums on getting the phone in working condition with the help of this: http://forum.xda-developers.com/show....php?t=2388440
However, before i go ahead and restore the phone's original firmware, i would like to know if there is anyway to recover some of the files. I have some important notes i wish to recover, everything else is on google and the external SD card so im not all lost.
I am able to put the phone in download mode by holding the up and down volume keys and then powering on the phone with the usb cable connected to the PC, but it is not showing as an external disk on the computer. I do have the LG drivers installed tho, the same ones i used to root the phone.
Any ideas?. thanks a lot.
What recovery do you have ? You may be able to mount internal and sd card in recovery and access them on your computer ?
optimusv45 said:
What recovery do you have ? You may be able to mount internal and sd card in recovery and access them on your computer ?
Click to expand...
Click to collapse
Hi thank for the help.
I have no clue about what recovery i have. I never played with the phone before the rooting and removal of the apps, so i believe it should be the "stock" recovery if you wanna call it like that.
axopro said:
Hi thank for the help.
I have no clue about what recovery i have. I never played with the phone before the rooting and removal of the apps, so i believe it should be the "stock" recovery if you wanna call it like that.
Click to expand...
Click to collapse
I don't know what guide you followed to get the root. If you followed this
http://forum.xda-developers.com/showthread.php?t=2450258
You should have twrp. Stock recovery may not be able to mount storages for uses on PCs.
Also I haven't seen the post you included , maybe that's an older post. A lot of people use this to recover their "bricked" phones
http://forum.xda-developers.com/showthread.php?t=2230994
I personally have followed this too.
As long as you have download mode you don't have to worry. However you need to read carefully before processing with teenybins because its something that can actually brick your phone if used wrong.
optimusv45 said:
I don't know what guide you followed to get the root. If you followed this
http://forum.xda-developers.com/showthread.php?t=2450258
You should have twrp. Stock recovery may not be able to mount storages for uses on PCs.
Also I haven't seen the post you included , maybe that's an older post. A lot of people use this to recover their "bricked" phones
http://forum.xda-developers.com/showthread.php?t=2230994
I personally have followed this too.
As long as you have download mode you don't have to worry. However you need to read carefully before processing with teenybins because its something that can actually brick your phone if used wrong.
Click to expand...
Click to collapse
Ok so when i did the rooting i followed that same guide you linked to, but i only did it to the root part. Not the "UNLOCK BOOTLOADER AND INSTALL CUSTOM RECOVERY-"
I just wanted the permissions to remove the apps.
So now with the TeenyBin guide.... will that erase the current settings and information on the phone or is it just an attempt to fix the firmware loop?
will the process attempt to restore the google apps missing?
axopro said:
Ok so when i did the rooting i followed that same guide you linked to, but i only did it to the root part. Not the "UNLOCK BOOTLOADER AND INSTALL CUSTOM RECOVERY-"
I just wanted the permissions to remove the apps.
So now with the TeenyBin guide.... will that erase the current settings and information on the phone or is it just an attempt to fix the firmware loop?
will the process attempt to restore the google apps missing?
Click to expand...
Click to collapse
There are different kind of teenybins. They do different things, one giving you a working recovery and updating RPM/TZ, one restoring your phone to complete factory state. You will have to read it to know what I'm saying here. The one that give you twrp and update your partitions may let your data alone but you will most likely still have the existing bootloop. The gapps missing ? The ones you deleted ? If you use the bin that recovers phones to factory state then you will have all the stock apps again.
Quick update.
I was able to recover the phone and the data in it. :good:
I installed the new boot loader with the teenybin instructions and was able to backup the data partition to an SD card.
Anyway, after that i went for a recovery using the stock firmware and LGNPST and now i lost the boot loader with all the neat options, but got the phone working again, and to my surprise, everything was back there including data and applications,. i dont get it but oh well... im back alive.
Ill backup all the important stuff from now on, and then i will keep messing with the phone again LOL. i learned quite a few things today... ill read more from now on before doing more things.
Thanks for all the help.!!
Good nite

Bricked Fire HDX 8.9 ; Need Stock Launcher?

Hello everyone,
Here is the sad tale:
I recently got my Kindle Fire HDX and immediately started fiddling with it. Got it rooted and installed GApps using KindleFree. I then decided to buy KindleFree Pro to tweak even more. I fiddled around with the custom launcher option and basically bricked the device all within the same day that I got it! I'm not sure what that option changed exactly behind the scenes but I was able to ADB in and noticed that Launcher-release-signed_82046410.apk has a size of 0kb... that can't be right so I figured I'd start there...
First, I'd like for someone to confirm the size of theirs, if it isn't 0kb (which I doubt it will be) then can someone kindly upload that APK so I can load it up and hopefully get this thing working again?
Alternatively, can anyone suggest a way to simply reflash the stock rom via ADB somehow? I never installed safestrap and I don't think it can be installed via ADB. At least not that I've seen.
Thanks!
ok sorry
mkid89 said:
Hello everyone,
Here is the sad tale:
I recently got my Kindle Fire HDX and immediately started fiddling with it. Got it rooted and installed GApps using KindleFree. I then decided to buy KindleFree Pro to tweak even more. I fiddled around with the custom launcher option and basically bricked the device all within the same day that I got it! I'm not sure what that option changed exactly behind the scenes but I was able to ADB in and noticed that Launcher-release-signed_82046410.apk has a size of 0kb... that can't be right so I figured I'd start there...
First, I'd like for someone to confirm the size of theirs, if it isn't 0kb (which I doubt it will be) then can someone kindly upload that APK so I can load it up and hopefully get this thing working again?
Alternatively, can anyone suggest a way to simply reflash the stock rom via ADB somehow? I never installed safestrap and I don't think it can be installed via ADB. At least not that I've seen.
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2786190 and that's why we have safestrap so you don't modify your stock http://www.youtube.com/watch?v=K6fPF5UZsWw
There are a few Devs still working on a way to flash something from fast boot no ETA means no promises seems the only fix for you may be to call Amazon . And maybe someone will chime in with a way to sideload an app I'm not sure. Good luck
I should have listened to the warnings when people said it was easy to brick! I've been modifying devices since the windows mobile days before android and never once have felt this hopeless! Safestrap will be the first thing I do once I get this running again.
The good news is I still have SU root access in ADB without needing a Fastboot cable. I'm thinking everything else but the launcher loads so it is pretty much fully functional but with no gui. It sometimes will even boots to the lock screen but unlocks to a black screen.
I think I should be able to sideload the launcher if someone can get me the apk.
well
mkid89 said:
I should have listened to the warnings when people said it was easy to brick! I've been modifying devices since the windows mobile days before android and never once have felt this hopeless! Safestrap will be the first thing I do once I get this running again.
The good news is I still have SU root access in ADB without needing a Fastboot cable. I'm thinking everything else but the launcher loads so it is pretty much fully functional but with no gui. It sometimes will even boots to the lock screen but unlocks to a black screen.
I think I should be able to sideload the launcher if someone can get me the apk.
Click to expand...
Click to collapse
If your patient somebody savvy enough will come by. and actually I know that I have read that someplace here I couldn't tell you where sorry. And if you're hoping for somebody to drop off the apk for you probably should let them know which firmware you are. Or you could always download the Bin file of your current firmware and exract it. Downloaded to an android rename it .zip and extract
That's a good idea but I don't know where to get the bin file or how to confirm I have the correct one. I had just updated so I believe it was the latest version. I'm thinking it's v13.3.2.1 or maybe v13.3.2.4 it said there were no more updates available so it should be the latest.
It's an 8.9. Don't think I mentioned that.
well
mkid89 said:
That's a good idea but I don't know where to get the bin file or how to confirm I have the correct one. I had just updated so I believe it was the latest version. I'm thinking it's v13.3.2.1 or maybe v13.3.2.4 it said there were no more updates available so it should be the latest.
It's an 8.9. Don't think I mentioned that.
Click to expand...
Click to collapse
8.9 is 14.3.2.4 https://s3.amazonaws.com/kindle-fire-updates/update-kindle-14.3.2.4_user_324002120.bin
Thank you for your help! I actually got it working shortly after my last post but got right into installing safestrap. ?
I'll post a write up tomorrow on what needed to be done in case anyone else has the issue. It's late where I'm at so I need to get some rest before trying to write it all up!
Ok! Now that I have a fresh mind I can document the steps I took to correct this issue.
How did this happen to begin with? I think that when I tried to set a custom launcher as default using KindleFree Pro, the launcher I selected was unable to load properly or something interrupted the process. Either way, it either would only load to the lock screen or just sit on the boot animation. I'm thinking the way that KindleFree works is that it replaces the default launcher apk with a link that points to the launcher you want to replace it with (hence the 0kb size). Either that or something got corrupted during the process of changing the launcher. I'm not sure what KindleFree does behind the scenes so this is all just speculation.
Anyways, on to the good stuff. Once I noticed the launcher was 0kb, thats where I decided to direct my troubleshooting efforts. I posted this thread hoping someone would upload the stock launcher for me to replace it with but jimyv gave me the idea to just grab it from the bin. I ended up finding the bin file here: http://www.amazon.com/gp/help/customer/display.html?nodeId=201357190 before he replied with the direct link. The "Download Software Update" link is a direct link to the .bin file. I changed the extension, opened it up and found the launcher apk per jimyv's suggestion.
Once I had the file, I needed to get it onto the HDX. I more or less followed the instructions here: http://forum.xda-developers.com/showthread.php?t=2588608
Instead of replacing the odex files, I replaced the launcher apk under /system/app/ As soon as it had finished copying over, the device went from the boot splash screen to the lock screen in what can only be described as a magical moment.
Interesting to note: Most people say that if you perform a factory reset from the stock recovery, your hopes of using ADB and having root are gone unless you get a factory/fastboot cable. I actually did perform a factory reset but for some reason was still able to use ADB and did not lose root access. I had used TowelRoot to root the device so I'm wondering if that is a more permanent means of rooting compared to other methods? Either way, I'm glad I didn't lose root. Otherwise I would have needed to wait for a factory cable to be shipped and to root it via ADB.
Fyi that Chinese root method which is posted early on in the rollback thread it will root with ADB only.. And the factory reset thing has not really been consistent throughout each user.. But more or less we have been advising people not to because the chances are greater that you will lose the superuser binaries and you definitely will lose safestrap if installed. What is hard to get through to people is when they are in a boot loop they get in a hurry and start factory resetting and that is not always the best option. Depending on exactly what is going on. Most of the time it is people losing their ADB access and cannot figure out how to uninstall the MTP drivers first then install the ADB drivers..
Good job getting your device back online and thank you very much for the closing write up .
mkid89 said:
Ok! Now that I have a fresh mind I can document the steps I took to correct this issue.
How did this happen to begin with? I think that when I tried to set a custom launcher as default using KindleFree Pro, the launcher I selected was unable to load properly or something interrupted the process. Either way, it either would only load to the lock screen or just sit on the boot animation. I'm thinking the way that KindleFree works is that it replaces the default launcher apk with a link that points to the launcher you want to replace it with (hence the 0kb size). Either that or something got corrupted during the process of changing the launcher. I'm not sure what KindleFree does behind the scenes so this is all just speculation.
Anyways, on to the good stuff. Once I noticed the launcher was 0kb, thats where I decided to direct my troubleshooting efforts. I posted this thread hoping someone would upload the stock launcher for me to replace it with but jimyv gave me the idea to just grab it from the bin. I ended up finding the bin file here: http://www.amazon.com/gp/help/customer/display.html?nodeId=201357190 before he replied with the direct link. The "Download Software Update" link is a direct link to the .bin file. I changed the extension, opened it up and found the launcher apk per jimyv's suggestion.
Once I had the file, I needed to get it onto the HDX. I more or less followed the instructions here: http://forum.xda-developers.com/showthread.php?t=2588608
Instead of replacing the odex files, I replaced the launcher apk under /system/app/ As soon as it had finished copying over, the device went from the boot splash screen to the lock screen in what can only be described as a magical moment.
Interesting to note: Most people say that if you perform a factory reset from the stock recovery, your hopes of using ADB and having root are gone unless you get a factory/fastboot cable. I actually did perform a factory reset but for some reason was still able to use ADB and did not lose root access. I had used TowelRoot to root the device so I'm wondering if that is a more permanent means of rooting compared to other methods? Either way, I'm glad I didn't lose root. Otherwise I would have needed to wait for a factory cable to be shipped and to root it via ADB.
Click to expand...
Click to collapse
could i use this way to fix my fault at this link bro?
http://forum.xda-developers.com/kin...p-kindle-fire-hdx-8-9-doesnt-able-to-t2816663
I took a look. That's a totally different issue than my issue. Mine wasn't getting stuck on the recovery screen. Sorry.

Looking for a stock rom for Flycat optimum 5501, Android 5.1.

Hello there, sorry for posting, this is literally my last resort.
So, here's the whole story. In my attempts to install a custom recovery mode(first TWRP) then I tried to follow this guide: Link is here of xda forum. So, my phone runs Fastboot and doesn't really have any stock recovery (just a factory settings window, which is now gone as well). So apparently after I entered these two commands into adb
fastboot oem unlock
fastboot format userdata
Click to expand...
Click to collapse
The first command unlocks the boot-loader and I thought that the second command would erase userdata, which is just photos and files, but apparently that second command has erased the whole rom + the factory settings window, that was on the phone.
So that's basically the story, now I am searching for a Stock ROM of the Flycat Optimum 5501, Android 5.1.
My phone is:
Flycat optimum 5501
Was running Android 5.1
If any information is required, I will provide. Please help and thank you for reading!
Alright development update. I've did like hell of a lot of digging, until it hit me to check the official Flycat website, so I went back and forth through the whole website right? And bam, I literally found 2 STOCK ROMS by going to this link.
I am still currently looking into ways to how to install this rom. If anyone could give advice onto how to install it using Fastboot, I would be thankful!
Update: So I found out that an application "Smart phone Flash tool" can flash your whole phone if you accidentally ****ed up. So I went to watch a few tutorials in youtube about that application and I managed to unbrick my phone. It works as it worked at the start. Welp I managed to fix it with pure research and dedication to this **** (I gotta get some beer)
At any case, for those of you who have the same phone and run into the problem. I hope that my updates will help ya. Sorry for the constant posting, my problem is fixed ^^
I do still wanna find a custom recovery image, that would work on this phone, so if anyone finds a way, please comment!

Categories

Resources