My first post, but I've been reading in this forum for two months, a couple hours each day. It's habit forming.
Gtab, tnt lite v.4.1.0
I have a USB adapter made by Sigg that has a 16gig microSD inserted. Formatted (several times) FAT32. When inserted in the gtab USB host slot the disk is not mounted without a lot of plugging and unplugging and praying to the gods. There have been a few messages telling me that the 'card is damaged' when it is not. The microSD card works fine when inserted in the gtab's microSD slot. But it can take hours of fiddling to get the card to mount in the USB slot.
After lots of searching it seems that everyone else takes USB flash drives on the gtab for granted. They all seem to work. Mine doesn't, but works fine in my XPpro 32bit laptop.
If anyone can give me some ideas for troubleshooting this I'd appreciate it.
By the way, this forum is something of a phenomenon. After looking at the gtab threads I went out and bought mine at Sears. What better way to get acquainted with Android? My thanks go out to everyone here who has contributed. Someday I might be able to contribute as well.
I think about ways to better manage the gtablet xda forum, a lot. It has become a monster - but it's not a bad monster, more like a cute and cuddly Sesame Street monster.
How to organize all this fabulous information so that it can be easily searched and utilized? Good question.
All I can say is - keep up the good work. This forum is a fantastic resource.
Thanks all
Two thoughts:
First: I'd change the title. This isn't a thumbdrive issue, really, so much as a USB SD Reader problem.
Second: I've run into similar issues myself. But I've noticed that I have a couple odd ball readers tht don't work on Mac but does work on Windows. This may be a driver issue. My suggestion would be to try another SD card reader and see if that makes a difference.
I also have a USB adapter with a micro SD inside of it. I find that it does not mount on bootup, but it mounts fine if I remove it and re-insert it.
I was wondering if there is an app for sending a software command to mount the USB. I have looked, but have not found.
smalis, my question exactly!
Taking aaltieri's reply into consideration I experimented with a plain-jane thumbdrive, an adapter with a standard SD, and my adapter with the microSd. Others have demonstrated that adapters with more than one slot will not work. Both my adapters have one slot only.
So here's the intriguing results: The plain-jane thumbdrive is just as unreadable as both adapters UNLESS you boot the machine with the adapter/thumbdrive in the slot, then remove it and put it back in. Then they all read after a short detection period. BUT once the drives are removed after detection they cannot be read again until the machine is shut down and rebooted with the drive in, then remove it and put it back in for detection.
What we need is a method for mounting and unmounting USB drives. I've searched and cannot find a way to unmount the drive under tnt lite. It does not show up in settings/storage like the sd cards do.
By the way, the little Sigg adapter is very tiny, sticking out only 1/4" from the side of the gtab. I got it at Fry's Electronics for $6. I leave it in the slot full-time and it helps keep the power button from being activated when the gtab's inside it's sleeve. I use a Belkin 'non-slip' netbook sleeve (also at Fry's) and the gtab fits only slightly loose. I use a couple of ultrathin mouse pads/screen protectors, one on each side, to increase padding. The Belkin sleeve is difficult to drop due to the grippy sides. The ultrathin mouse pads are marketed for netbook use, to put under the lcd when closing the lid to protect the screen (also Fry's Electronics - what can I say, I'm hooked on the place).
The idea I had was to have 16gig in the SD slot and 16gig in the USB slot. The 32gig microSDHC's are cost prohibitive for me right now. And I still have 11gig remaining on the internal memory. I'd better get to work filling it . . .
Yeah, I have one of those tiny USB micro-SD adapters also (elago Mobile Nano II USB 2.0 microSDHC Flash Memory Card Reader from Amazon), and am very happy with its small footprint.
I had same idea as you - I have a Wintec 16 GB Class 10 MicroSD (~$30 on Newegg) in the SD slot and another one in the USB slot.
However, I have no problem reading the USB slot after unplugging and plugging it in once, or multiple times.
The only time I cannot read it is when I boot with it in. Then, I have to unplug it and plug it in once.
Yours seems more flaky.
Just wanted to note that I had similar issues reading the contents of a FAT32 formatted thumbdrive when using the default iFileManager on Vegan. I downloaded the File Manager app by Adao Team on the market and I can read the thumbdrive contents just fine when using that app.
A follow up for anyone interested.
I migrated to vegantab 5.1 to get mouse and keyboard functionality. I also loaded the small update to 5.1 that has sniffer included.
I don't think sniffer is much to write home about, but it does mount all the usb 2.0 drives and even all the multi-adapters that I've thrown at it. Some posts have pointed out that the multi-adapters don't work. But they do, at least in my experience. I used a Sony adapter that has sd, micro-sd, sony's memory stick, compact flash, and some other port. My 16gig compact flash cards from my camera are read without a problem AFTER opening sniffer. The iFile manager that comes with vegantab does not see the usb 2.0 or the adapter until sniffer is opened. Then the system sees the drives with no problem.
It works every time.
I decided to use an HP wireless mini keyboard. It's a perfect match for the gtab. I thought about dropping $80 for the new Verbatim folding bluetooth keyboard but the HP allows for much better touch typing and I need to do that. Best Buy has a cd/dcd carrying case made by Init that is essentially a hard case that fits the HP keyboard perfectly one the cd sleeves are removed. There's room under the keyboard for headphones, flash memory, and other odds and ends. With vegatab and the mouse fix, the keyboard is easily detected and the mouse pointer works great.
Anyway, it looks as if the mounting issue is one that can easily be taken care of with an app. Another more recent poster on this issue has noted that changing file managers allowed him to mount usb drives that iFileManager would not see. But sniffer works and it's there for seperate download if anyone wants it. I think it looks like crap and doesn't do much. I'll use it in the meantime, though.
r2d2tek said:
A follow up for anyone interested.
I migrated to vegantab 5.1 to get mouse and keyboard functionality. I also loaded the small update to 5.1 that has sniffer included.
I don't think sniffer is much to write home about, but it does mount all the usb 2.0 drives and even all the multi-adapters that I've thrown at it. Some posts have pointed out that the multi-adapters don't work. But they do, at least in my experience. I used a Sony adapter that has sd, micro-sd, sony's memory stick, compact flash, and some other port. My 16gig compact flash cards from my camera are read without a problem AFTER opening sniffer. The iFile manager that comes with vegantab does not see the usb 2.0 or the adapter until sniffer is opened. Then the system sees the drives with no problem.
It works every time.
I decided to use an HP wireless mini keyboard. It's a perfect match for the gtab. I thought about dropping $80 for the new Verbatim folding bluetooth keyboard but the HP allows for much better touch typing and I need to do that. Best Buy has a cd/dcd carrying case made by Init that is essentially a hard case that fits the HP keyboard perfectly one the cd sleeves are removed. There's room under the keyboard for headphones, flash memory, and other odds and ends. With vegatab and the mouse fix, the keyboard is easily detected and the mouse pointer works great.
Anyway, it looks as if the mounting issue is one that can easily be taken care of with an app. Another more recent poster on this issue has noted that changing file managers allowed him to mount usb drives that iFileManager would not see. But sniffer works and it's there for seperate download if anyone wants it. I think it looks like crap and doesn't do much. I'll use it in the meantime, though.
Click to expand...
Click to collapse
I didn't even think of Sniffer. I have a cheapo USB reader that was intermittently working (1 out of 60?). After your suggesting, if I open sniffer then plug it in, it sees it every time.
Folks,
I don't know that there is an answer I have seen to all your questions/observations.
I will say:
1. microSD post and USB on the tablet are not plug and play like Windows.
2. When I change my USB key or microSD, I always shut down and likewise I
always shut down before removing them.
3. Yes, I know that's a pain if you change a lot, but for me it makes sure
Android's flicted OS searches for, finds them, and in turn properly shuts them
down before I remove them.
For me, in and out as need just doesn't work.
Rev
EDIT: P. S. -- You all seemed like sharp guys. Should I have asked if you
are looking for the files under /USBdisk?
In my experience, thumb drive mounting is hit and miss. Maybe it's just the drives that I'm using, but it's unreliable. Also, with Gingerbread and Pershoot's kernels, he references having to revert something in order to get USB mount to work (thinking about it, that might refer to mounting the tab to a computer). I would suggest getting used to unmounting your external micro card in Android and growing out a fingernail or two so you can pop that sucker out. I think this is a low priority to the devs, and maybe it should be.
Related
Just wondering what can be done with the full size USB port. I've connected two cameras and my Droid X too it and none were recognized as mass storage devices. The only use I have found for it so far is that it can charge my phone. I would love to be able to be able plug in my camera (Sony, not SD card) and dump them on to it where ever I am for editing or uploading.
Thanks
Keyboards usually work right out of the box, so that can be a nice feature. Also, I think hard drives can be hooked up, but the tablet can't really power them, so they have to be connected via a powered hub. I think thumb drives/flash drives work as well, but I haven't tried them.
For me, being able to easily get a cheap, generic keyboard working has been a very nice feature of the tablet.
I believe I recall reading that you can use it for USB GPS receivers as well. I have not tried it myself.
ahhh a Keyboard, that would be a nice addition. Now that I think about it I am going to see if my bluetooth keyboard will work (don't have a USB one)
GPS is something I am missing more than I would have expected on a tablet
I have a 32gb thumb drive that works perfect. In fact, I have 5 thumb drives all with different data on them ranging from documents to videos.
noechelon said:
I have a 32gb thumb drive that works perfect. In fact, I have 5 thumb drives all with different data on them ranging from documents to videos.
Click to expand...
Click to collapse
That is what I use it for as well.
Anyone had success making USB controllers work for emulators? Seen the wiimote bluetooth setup, but I don't have a wiimote.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
Interesting someone said that the USB port cant power usb devices, i connected my bluetooth gps to my usb port yesterday to see if it would power the gps, it did, so im not sure why we would think it does not power usb devices, as mine seems to be working fine.
Im setting my gtab up in my car and wanted to know if id need a second power souce for both the gtab and the gps. Seems to gtab will provide power to the bt gps ok.
Icedvoco said:
Interesting someone said that the USB port cant power usb devices, i connected my bluetooth gps to my usb port yesterday to see if it would power the gps, it did, so im not sure why we would think it does not power usb devices, as mine seems to be working fine.
Im setting my gtab up in my car and wanted to know if id need a second power souce for both the gtab and the gps. Seems to gtab will provide power to the bt gps ok.
Click to expand...
Click to collapse
It's not guaranteed to power them. Some 2.5" external drives and devices take a bit more than 1 USB slot can handle, even on laptops. Ever had a 2.5" external drive that randomly shows up or pops up then disappears? Also, ever seen a mini usb cable with 2 male USB connections? That's so that if the drive has issues using 1 port, you can plug another in and your devices will work. Even some flash drives at high capacity+speed may give trouble. There's def. the propensity for other usb devices to behave that way as well. Keyboards generally don't have that problem unless they're advanced (have lights, usb ports/hub on them), also mice don't generally have that issue either but anything else can.
What can work?
I'll say more than likely any powered external hard drive.
Some USB powered 2.5" external hard drives (my 320GB is seen and is usable, my 40GB is not as it is older and requires more power).
Most flash drives.
More than likely, any usb device engineered to worth within the constraints of using a single usb port (wireless controllers, remotes, mice, some keyboards, some gps units, etc.)
What probably won't work?
High capacity, high speed or OLD 2.5" usb powered external hard drive (750-1TB)
Advanced devices with a usb hub on them or lots of lights or moving parts, powered solely by the usb port
High capacity, high speed flash drives (though I'm sure this is vendor specific)
Interesting, so low powered devices will be usable, but not high powered ones, thats fair enough, both my bt gps and my fm transmitter seem to be working fine.
Ive ordered a 4 port usb hub which i planned to use to connect both the gps and the fm transmitter to the usb port to give them power, no biggie if it isnt able to do that, as i can use the hub elsewhere, but be interested now to see if it will work. Thanks for the heads up.
Icedvoco said:
Interesting, so low powered devices will be usable, but not high powered ones, thats fair enough, both my bt gps and my fm transmitter seem to be working fine.
Ive ordered a 4 port usb hub which i planned to use to connect both the gps and the fm transmitter to the usb port to give them power, no biggie if it isnt able to do that, as i can use the hub elsewhere, but be interested now to see if it will work. Thanks for the heads up.
Click to expand...
Click to collapse
I also have an 'official Malata' USB to ethernet on the way for review to see if I can get it to work and see if there would be any interest for us in the States. I should have the demo today and will report back any findings?
IT2STEVE, I think you'll have takers on that USB->Ethernet adapter. I still stay at one hotel when traveling for work that does not have wireless (though most do). And sometimes at work, the wireless flakes out. This would be nice to have.
doctorisin said:
IT2STEVE, I think you'll have takers on that USB->Ethernet adapter. I still stay at one hotel when traveling for work that does not have wireless (though most do). And sometimes at work, the wireless flakes out. This would be nice to have.
Click to expand...
Click to collapse
Have you tried tethering to your phone? I used my MyTouch 4g hotspot feature at two diners this past weekend and it worked well.
Wondering about the usb nic driver, is it provided with the usb nic ? or do we need someone to develop one ? Ive had a quick look on ebay and can see a few of these available, naturally none of them are official Malata' USB to ethernet. so that raises the question of using none Malata ones ?
I use it for a flash drive too.
The issue is that I copied mp3 from the flash drive to the g-tab..and when I use File Explorer I can see and play the songs, but in the Music app they dont show up.
320 external hard drive
Hello. I am looking to buy a 320 GB hard drive for my gtab. I am wanting to buy the Western Digital My passport essential. Do you think this will work with the USB on this device? It is usb powered. Thanks.
the tab usb will not power a standard hd
Anybody ever tried a USB TV Receiver? I'm doubting it would work, but would be cool...
I was looking to use the usb port to load pictures from my camera's sd cards via a card reader onto the tablet when I travel. Saves me from taking my laptop with me. I can do everything I need with a smaller device like a tablet now. (Might have to save them back on a flashdrive though in case the Gtab decides to delete your pictures...)
And I guess you can always use the the port for your USB Pet Rock. (thinkgeek.com/geektoys/cubegoodies/c208)
Neoprimal said:
It's not guaranteed to power them. Some 2.5" external drives and devices take a bit more than 1 USB slot can handle, even on laptops. Ever had a 2.5" external drive that randomly shows up or pops up then disappears? Also, ever seen a mini usb cable with 2 male USB connections? That's so that if the drive has issues using 1 port, you can plug another in and your devices will work. Even some flash drives at high capacity+speed may give trouble. There's def. the propensity for other usb devices to behave that way as well. Keyboards generally don't have that problem unless they're advanced (have lights, usb ports/hub on them), also mice don't generally have that issue either but anything else can.
What can work?
I'll say more than likely any powered external hard drive.
Some USB powered 2.5" external hard drives (my 320GB is seen and is usable, my 40GB is not as it is older and requires more power).
Most flash drives.
More than likely, any usb device engineered to worth within the constraints of using a single usb port (wireless controllers, remotes, mice, some keyboards, some gps units, etc.)
What probably won't work?
High capacity, high speed or OLD 2.5" usb powered external hard drive (750-1TB)
Advanced devices with a usb hub on them or lots of lights or moving parts, powered solely by the usb port
High capacity, high speed flash drives (though I'm sure this is vendor specific)
Click to expand...
Click to collapse
This poster says their 320 GB hard drive is powered by it. So will the 320 GB western digital essentials be powered by it?
Hey people,
Massive regret if this has already been covered to the point of solving somewhere but i just can't seem to find a clear solution to my problem.
One of the main reasons i opted for the Archos 101IT was because of the usb storage possibilities and i am sadly let down by the lack of functionality. After searching over XDA forums, ArchosFans and a few other forums i have gathered alot of information about the usb ports and was even suggested a kernel that will let me extend the power supplied to the port (Currently only 100mAh i believe?)
My problem is im already on a different kernel and don't wish to trade my perm root and higher overclock just so i can use the ports as they should already work anyway. I have a 16gb and 8 gb sandisk flash drive that i would love to use but sadly it dosn't work. I also found a conversation (can't seem to find it again) where a list of successfull usb host adapter cables was created and so believing it i went ahead and bought one and it still dosn't work.
I have no doubt in my mind it's probably something i am doing wrong and if someone could slap me in the right direction i would be very greatful.
Again, sorry if my attempt at searching has failed but despite the countless conversations on this topic the only solutions that i have come across are completely changing my kernel and a cable that didn't work!
Why is it so difficult to use damn storage? that's what the usb is there for am i wrong?!
Thanks in advance =]
your post doesn't make that much sense - Archos 70 and below requires usb host cable - the 10 already has a full size usb host port and sufficient power to run flash drives
Yes it does, but as i said it only powers up to 100 mAh without the usb power kernel and i believe it's the mini usb that powers higher normally. It's my understanding that on the other posts i have read a host cable from the Mini usb port is supposed to give you the option of powering a flash drive as the mini usb offers a greater power supply.
I hope this makes sense now, im just reporting what i'v gatherd viewing other peoples issues and im confused to hell about any real/ideal solutions and also as to why the bloody thing can't just work as advertised.
Maybe if we can't get any meantime solutions people could start listing what's working for them? If anything at all? As i have seen reports of success with flash drives on both the 101 and 70 and also people saying they had it working at one time then it's never worked since. All threads seem to end in either "Sold my archos" Or "Sent back to archos and and they replaced it but now it's still not working" Also i can see archos have no apparent interest in the complaints that people have made.
Cheers
The 100mA limit is only on the A70. The A101's full-size host post puts out about 450mA, but alot of devices have an initial spike higher than that in the initial plug in, just to charge the capacitors and enter active mode. The problem with the A101 is that it shuts down current when it spikes like that, resetting the device, and requiring another start-up cycle. No solution I know of yet. I've managed to find low-power devices, you can also use an in-line power supply usb cable.
Hi msticninja, cheers for your reply.
Sorry for my complete lack of electronics but im understanding that the flash drive's im using require more then the 450 just to power up and then they would use less?
Does inline mean a mains powered usb? as i have a 2 tb mains powred HD that i havnt tested yet but if it worked it would be a temp solution for home, but i would love to be able to use my flash drives (or any flashd drives) when on the go. Could you suggest some of the flash drives that have worked for you under that power spike?
Thanks!
Nufan1121 said:
Hi msticninja, cheers for your reply.
Sorry for my complete lack of electronics but im understanding that the flash drive's im using require more then the 450 just to power up and then they would use less?
Does inline mean a mains powered usb? as i have a 2 tb mains powred HD that i havnt tested yet but if it worked it would be a temp solution for home, but i would love to be able to use my flash drives (or any flashd drives) when on the go. Could you suggest some of the flash drives that have worked for you under that power spike?
Thanks!
Click to expand...
Click to collapse
Yes, after the power up they use less, but that initial spike causes the Archos to shut down the USB port.
Definitely try the mains powered HD just to test. Also, sometimes a really quick unplug and replug can help.
My Kingston Datatraveler G2 (16GB) works fine, and I have some generic 1GB sticks that work as well. It's kind of hit or miss, to be honest. If you have a local electronics store, they may have some that aren't packaged, so you could test them in-store.
http://cgi.ebay.co.uk/Kingston-16-G...660?pt=LH_DefaultDomain_3&hash=item19c64a7c54
Is that the right one? I sadly live about 20 miles away from any decent modern electronic store so id rather just buy one, if there's anything i have learned about flash drives as a producer, you can never have enough and also they will always sell on ebay for near the original price.
Thanks again =]
Also, Just plugged an old microsoft mouse into the large usb port, it lights up for a second then turns off with no real connection made.
Tried the same mouse in the smaller usb port with a host cable and nothing happens, could be the cable though.
Nufan1121 said:
http://cgi.ebay.co.uk/Kingston-16-G...660?pt=LH_DefaultDomain_3&hash=item19c64a7c54
Is that the right one? I sadly live about 20 miles away from any decent modern electronic store so id rather just buy one, if there's anything i have learned about flash drives as a producer, you can never have enough and also they will always sell on ebay for near the original price.
Thanks again =]
Also, Just plugged an old microsoft mouse into the large usb port, it lights up for a second then turns off with no real connection made.
Tried the same mouse in the smaller usb port with a host cable and nothing happens, could be the cable though.
Click to expand...
Click to collapse
I don't think the mini-usb operates in host mode on the A101, only on the A70. As for the mouse, I have had better luck with wireless mice. I think the wired ones, older "red" optical ones in particular, use more power than I expected.
I think I told you the wrong USB drive though. I'm just plugging it in to double check and it's not working. Let me look around and figure out what I was using.
Haha yeh it was a wired oiptical one, i assume the wireless ones work better as most are powered by battery and im guessing the usb reciever only needs a small ammount of power. Is that the correct usb on the ebay link though? If so i will buy it asap as im desperate for a working solution.
Thanks =]
Looking through logcat though, I don't see a power error. I think I formatted this [email protected] with NTFS, and it can't mount it. Give me a couple of minutes to test this out.
Yep, that's the problem. I just turned on NTFS support in UrukConfig and it mounted just fine. That link on eBay should work fine for you as long as you don't use NTFS without urukdroid.
Ok cool, is it having trouble recognising it now? Both mine are Fat32 i believe in order to switch between my mac and windows computers, let me know if it still works when you can =]
It's fine with NTFS enabled in UrukConfig. Fat32 should work by default. BTW, you can enable NTFS support on Mac pretty easily. If you have files bigger than 4GB, it's essential.
Haha i havnt had to cross that issue yet as i mostly work with sound samples around 2mb or under, but i will definately be correcting that soon. So is this the correct model before i purchase it? im excited now that you have re confirmed it! =]
http://cgi.ebay.co.uk/Kingston-16-G...660?pt=LH_DefaultDomain_3&hash=item19c64a7c54
Thanks for the info!
Yup, that's the one. It's a tiny bit big, but it's very fast.
Haha mate, size isnt an issue at all, aslong as the damn thing works im going to be a happy bunny. All i have been missing since buying this thing is the extra storage. My sd card is currently running whole OS as it was needed for 'perm root' and it also has 259 swapfile so that's the 8gb gone. If this usb storage works it means i'll finally be able to free up the enitre internal storage i've been clogging up with music and movie for some more apps.
Wish me luck =p thanks again! =]
That's why I like to run Android from the Internal Storage, so I can remove the Sdcard without shutting the tablet down.
Good luck!!
As soon as a decent root comes along where i can overclock to 1.2ghz on internal storage id be more then happy to run on internal, sadly the only one i know is archangels and it only works when in a wifi area =/ unless im mistaken then id gladly eat my words! =]
Nufan1121 said:
As soon as a decent root comes along where i can overclock to 1.2ghz on internal storage id be more then happy to run on internal, sadly the only one i know is archangels and it only works when in a wifi area =/ unless im mistaken then id gladly eat my words! =]
Click to expand...
Click to collapse
Technically you could, but it's a bit of an involved process. You do need the SDE installed though. Actually, I wonder if anyone's tried ardatdat's kernel recently with Uruk. It hasn't worked for a while, but there's been multiple beta updates since the last time I tried it.
That would be very tempting, im on sde anyways. Just a question, whats the 1 watt speaker about in ur sig? Is that a hack?
Nufan1121 said:
That would be very tempting, im on sde anyways. Just a question, whats the 1 watt speaker about in ur sig? Is that a hack?
Click to expand...
Click to collapse
My speakers went out, because they're horribly overdriven, like most people's. I replaced them with 1 Watt Kobitone speakers that have a higher sensitivity, so it's louder at lower volume settings, and can go to a very high max volume without damaging the speakers. It's a simple replacement, but you have to open the case and solder in the new speakers.
hello!
i am looking forward for the german release of the GT 10.1 - i want to use it as some kind of "mobile picture transfer"-device - so basicaly it should get the job that my netbook has right now
as far as i know, the tab is able to access usb thumb drives
but what about cardreaders and those small 2,5" HDDs? had anyone the chance to already try if those things work as well?
just to tell yo uthe setup that i want to use (if this will be possible) - get the CF-card out of my cam - plug the cardreader with the CF-card into the GT, transfer the pictures - plug the HDD into the tab - transfer the pictures onto the HDD
i am pretty sure one of you may knows the answer
tia
msgnighty said:
hello!
i am looking forward for the german release of the GT 10.1 - i want to use it as some kind of "mobile picture transfer"-device - so basicaly it should get the job that my netbook has right now
as far as i know, the tab is able to access usb thumb drives
but what about cardreaders and those small 2,5" HDDs? had anyone the chance to already try if those things work as well?
just to tell yo uthe setup that i want to use (if this will be possible) - get the CF-card out of my cam - plug the cardreader with the CF-card into the GT, transfer the pictures - plug the HDD into the tab - transfer the pictures onto the HDD
i am pretty sure one of you may knows the answer
tia
Click to expand...
Click to collapse
Spinning hard drives might have power problems.
A card reader should work though - I'll be testing an SDHC reader 1-2 days from now when my adapter comes in.
would be great! thanks!
maybe a 2,5" SSD works if a HDD wont work - i am looking forward for your update
a powered hd shouldn't be a problem
Yeah, if you've got a 3.5" with an external power supply it should work.
It's just that bus-powered 2.5" drives might be pushing the limit.
Entropy512 said:
Yeah, if you've got a 3.5" with an external power supply it should work.
It's just that bus-powered 2.5" drives might be pushing the limit.
Click to expand...
Click to collapse
I had problems with my 2.5" drive and the Tab, but it works fine behind a powered USB hub.
pokey9000 said:
I had problems with my 2.5" drive and the Tab, but it works fine behind a powered USB hub.
Click to expand...
Click to collapse
That makes sense, since then the hub is providing power. It effectively makes the 2.5" drive an externally powered one, at least from the tab's point of view.
Entropy512 said:
Spinning hard drives might have power problems.
A card reader should work though - I'll be testing an SDHC reader 1-2 days from now when my adapter comes in.
Click to expand...
Click to collapse
were you able to already check this?
would be great to know if those usual card readers work (those who read several formats like SD, CF and all that stuff)
My adapter came in last night and I had to rush out the door. Tonight maybe.
would be amazing!
Why not look at an EyeFi card and do it wirelessly. Works great with my original 7" tab
Eh, they're kinda slow and have issues with some cameras.
I can confirm that a USB thumb drive works perfectly. So a USB card reader should be fine, it's basically the same thing. I'll try this weekend.
So much to do, so little time.
I'm trying to find the best combination of portable hard drive and compact powered hub, since most portable hard drives are USB powered.
Anybody have any suggestions?
00r101 said:
Why not look at an EyeFi card and do it wirelessly. Works great with my original 7" tab
Click to expand...
Click to collapse
as far as i know are there no Compact Flash EyeFi cards available?
@Entropy: so far it seems to take antoher month till release here in germany - so take your time but don't forget me
I have both an Eye-Fi Card and the USB adapter. Thumb drives and card readers work. I have not yet tried it with a 2,5" HDD.
Just tried a Rosewill SDHC reader with a Transcend 16GB Class 6 SDHC card, no problems at all.
I just got my original ET-R205UBEG OTG cable for my i717 Galaxy Note and can confirm that you can run any size drive off it as long as you power the drive from a separate power source. The note doesn't have the power to power anything more than a flash drive, keyboard, mouse, or card read.
You must format the drives partition to FAT32 because that's all the ET-R205UBEG supports since it's design really for flash drives or card readers using which support this format. You can download the free Windows utility Swissknife which will let you format any size drive with a FAT32 partition.
On a side note, I plugged in a IR receiver just for fun and was able to control my note (somewhat) with the MCE remote control that came with the receiver. I'll do a little tinkering but I suspect I'll be able to expand the functionality of the remote. Right now is can change the volume level, fast forward and reverse, move a mouse pointer around the select and select and run an app. I'm sure there's a lot more I can do but I've only been playing for an hour.
In case anyone's wondering, I got my ET-R205UBEG adapter from greytech .com in Canada - they only sell to Canadian clients and the items not listed on their site. It's $22.99. Call them at 905-470-1425.
Lacie apparent makes a low voltage drive called the Rikiki. I plan to order one and see if the note has enough power to run it. Lacie told me that it should work since it works on the MAC Air when most other external system powered drives do not.
My flash drive of course worked perfectly and respond much faster than the MicroSD class 10 32GB card inside my note. I think I'll be using the OTG adapter a lot more than I expected.
One final note, the OTG from Samsung is my third OTG adapter. The other two (both from eBay) either didn't work at one or kept disconnecting. For my money, $22.99 is a low price for a quality product that Samsung actually will support.
I paid $4 for my OTG adapter from Brando Workshop. It works perfectly fine.
I have a similar reaction as goalcam. What advantage does this $22 unit have over the lower priced units?
How about a Ssd?
Sent from my SGH-I717R using XDA
card reader
A little off subject, but can someone point me to a card reader that works with an OTG host cable? I've tried 3 here and none of them seem to work. Is there some driver I need to load/enable? flash drives work fine on it. I haven't tried anything else.
Thanks
Hello all!
I am going to start work on adding a usb micro sd card reader to the nexus 9. I started off by taking off the nexus 9 backplate (very easy, just need a finger nail to get the clips undone) and you are immediately greeted with the internals of the tablet. The first thing I noticed is an indentation for what I believe to be where the micro sim card would go for the LTE version of the tablet, it could also be a place were they were going to put a micro sd expansion slot but may have ruled it out in the end. I also noted that there is some grooves for routing wires down to the micro usb slot, which would definitely make it easier to keep the wires clean looking. the micro sd card adapter I was thinking of using is this one: http://www.amazon.com/elago-Nano-Mo...6610073&sr=1-10&keywords=micro+sd+card+reader
I would end up tripping of the usb connector for the reader and soldering wires straight from the read to the mobo.
Take a look at the pictures enclosed and let me know if you have any suggestions.
Stay tuned! More updates to come!
You beet me to this
I will most likely do this
You're looking to take over the usb connection as OTG? Or?
@minnieman
if your going to use this as an OTG
you will need to have a switch to turn it off
USBhost said:
@minnieman
if your going to use this as an OTG
you will need to have a switch to turn it off
Click to expand...
Click to collapse
Duely noted.
Nice idea but this is definitly the wrong forum for this. Not Original Android development. This belongs in the general section.
Any progress yet?
Don't know if came across this threads. soldering a micro sd card has been tried before, maybe you can find some useful info here.
http://rootzwiki.com/topic/30797-op...in-micro-sd-card-reader-to-nexus-7-build-log/
http://forum.xda-developers.com/showthread.php?t=1884163
This is the (electric) solution.
But with a Tablet....
http://kck.st/15qbBPw
Quick question op regarding removing the back panel. Were there any issues with the camera coming off as well? In ifixit's tear down they said the camera popped off along with the back panel because it was too snug. I will be taking mines off but have been hesitant because if this.
Hey, any updates on this?