Hey guys,
I have looked all over the forum, and you all have different versions, im guessing im the only knob with a different version from the rest of you. haha
System Information
Model x10I
Firmware Version : 2.1-update1
BaseBand Version : 2.0.46
Kernal Version : 2.6.29 [email protected]#1
Build Number : 2.0.A.0.504
Now i've finaly got the currouge up to try and root this damn phone, but not having any luck following this guide?
http://forum.xda-developers.com/showthread.php?t=908791
That's not just root mate, that's an entire rom.
Look in the android development area, several ways to root. I used x10 flasher to root mine, fw vers 435.
Sent from my X10i
Yeah, I'm going through that now.
I got it to root in the end with a few of hitting the screen, and smashing buttons
Going through that step, then going to install the http://forum.xda-developers.com/showthread.php?t=947613 Rom,
and i should have everything i need from doing this complete rom install.
hopefully, plus its practice.
Hey baddie,
The new roms need you on the latest baseband, if you update your phone through PC companion first you will be able to update to any rom without any issues.
Sent from my X10i using XDA App
Okay so question.
since i just rooted, and put free xbeta 3 on, cause i havnt got the letest version. how cna i get the latest version? is there a link on here for it?
that i can just install? or only through SE? at the moment?
badd1e said:
Okay so question.
since i just rooted, and put free xbeta 3 on, cause i havnt got the letest version. how cna i get the latest version? is there a link on here for it?
that i can just install? or only through SE? at the moment?
Click to expand...
Click to collapse
Hey sorry for the delay in replying was in bed at the time,
Beta 4 is the latest version of freex10 available, I think I remember seeing that you can use the flashtool to get the latest baseband as well, saves you having to go back to the stock 2.1 just to update.
http://forum.xda-developers.com/showthread.php?t=939812 this is by Steve Adams on how to get the new baseband.
In point 4 of his guide follow the link and it will take you to Zdzihu Beta 4.
Everything is in those 2 posts about what you will need to do, but just so you know the way I did it, I was on beta 3 at the time I was jumping back and forth between stock 2.1 and freex10 using xrecovery, I then updated through pc-companion to the latest firmware, then after downloading beta 4 updated the phone and i've been using beta4 every day since.
My only caution (well 2) is when using xrecovery to do the backups they take up quite a bit of space, so just be aware,
2nd and most important always, ALWAYS take a backup. Dump the contents of your memory card to a disk so just incase like me last week if your card is corrupted cause you had it connected to a device that lost power you can just restore it and carry on as if nothing had happened... yeah i didn't do that part caused me no end of headaches as I had lost some text messages that I meant to reply back to, oops.
Saying that, I still haven't taken a backup after gettting it back (smacks own hand)
Related
Hello i am new to the X10 forum, just got the handset second hand, but in super condition, the other day and i must say i is really growing on me!
Being a former, Htc hd2, galaxy tab, htc magic owner i have done allot of tweaking to my devices, so i started of with rooting my x10, putting on jit, deleting a ton of apps and so on, and i must say it is running great now with dual touch and all.
But i see there is a newer firmware out there and also a froyo rom (which i might wait on getting til everything works).
when i check about phone, i currently get this information:
Firmware version: 2.1 update 1
Baseband version: 2.0.46
Kernel version: 2.6.29 [email protected] #1
Build number: 2.0.A.0.504
so here comes the questions:
1) What is the newest version of 2.1 i should look for? ( a link would be great )
2) Will there be any major changes?, i looked abit around and it seemed that its mostly about battery life and so? i got about 32 hours last full circle with 17 procent left when i recharged it.
3) I am trying to use "setcpu" but i am not sure it is allways running since it dosent always show up in my app killer program, is there a way to make it run allways?
4) Another program i am using for the first time is APNdroid, i am not really sure about, and the question goes, does it do anything automaticly? or is it only a switch (the widget) for turning on or off all wireless radios? same thing with this as with "setcpu" i dont feel sure that it is running?
5) Is there a work around to get the camera working in froyo? using a third party app maybe? is there other disadvantages and is there a way to get the Sony E wallpapers loaded to the rom ? ( i actually really like the cosmetic chances of the X10s android)
I thank you for taking a bit of your time, i am glad to be back at xda with my phone, just had to sell my Nokia n8 since i just missed xda and all the fun too much
1) What is the newest version of 2.1 i should look for? ( a link would be great )
Click to expand...
Click to collapse
If you're referring to firmware, Then 2.1 Generic Firmware (2.1.A.0.435) is the latest as of now. You can update using the flashtool. (Try searching the forum for tutorial)
2) Will there be any major changes?, i looked abit around and it seemed that its mostly about battery life and so? i got about 32 hours last full circle with 17 procent left when i recharged it.
Click to expand...
Click to collapse
Well yeah Timescape has landscape mode, Smoother unlock, HTC keyboard.
PS: I tried to do my part of help I can, I am really unsure of other questions. You can wait for others to help you out buddy!
it's portrait and landscape mode*
3) I am trying to use "setcpu" but i am not sure it is allways running since it dosent always show up in my app killer program, is there a way to make it run allways?
Click to expand...
Click to collapse
use it as a widget,you will see it always then
4) Another program i am using for the first time is APNdroid, i am not really sure about, and the question goes, does it do anything automaticly? or is it only a switch (the widget) for turning on or off all wireless radios? same thing with this as with "setcpu" i dont feel sure that it is running?
5) Is there a work around to get the camera working in froyo? using a third party app maybe? is there other disadvantages and is there a way to get the Sony E wallpapers loaded to the rom ? ( i actually really like the cosmetic chances of the X10s android)
Click to expand...
Click to collapse
camera works great,video cam is not working ,we use cam illusion as a alternate
Thanks guys
I might go for froyo, just dosent look as good as SE custom blueish skin, but i guess the speed is worth it. would love those wallpapers though.
Is the froyo batterilife worse? ( i am thinking the SE rom is optimized for the device while froyo is not?)
Okaj now i really need some help did a really unwise thing, was not intentionaly just forgot to flash newest baseband radios
well i flashed froyo without the newest baseband and now it just keeps restarting and restarting with the freex10 logo, is there any way i can get the phone to talk with the computer so i can flash the newest baseband?
i allready tryed the factory restore, don tknow why i didnt think of backing up or something so foolished mistake.
if anyone can point me to some help i would be glad.
Download newest flashing software for x10
>>>HERE<<<
Also get yourself a copy of the newest FW with new baseband >>>HERE<<<
The second link should give you the required file to use with the new flash software.
Just put the files in Firmware folder of your Flash software install location and hunt out the simple instructions.
When you have done press the Root option on your flash software and install xrecovery and titanium backup.
Instructions for flashing to the 2.2 froyo beta 4 are in the development section but make sure you use xrecovery to wipe user data before you flash it.
I'm guessing thats why you semi-bricked your X10 last time.
Hey i got it up running by loading v3 of froyo, so now i can just flash the newest, and then v4 i hope so at least but thanks
oh i see so the flashing it will give me newest baseband super thanks
simon2901 said:
oh i see so the flashing it will give me newest baseband super thanks
Click to expand...
Click to collapse
If you can't make it, check howto thread
I did manage to get a hold on it, feel in control now thank you by the way does anyone any good "skins" /"Themes" ( not sure what its called) for froyo on it?
HI, im new here since I got my X10 today. Just want to ask a simple question... everyone here seems to have baseband .54 as the lastest but I just update my phone and I got BB .55 with build number 2.1.1.A.0.6; can I flash freex10 beta 4 even with BB .55 ? Or can I even root it ? I want JIT like hell !
Edit : Rooted with SuperOneClickv1.5.5-ShortFuse ! NIce !
Edit : freeX10 beta 4 INstalled and working with new baseband .55 !
just make a backup with xrecovery and try it out!! If you get into bootloop you can just get back into xrecovery by turning on phone and pressing back button constantly until you're back in it, and go back to your backup.
That looks like a new build number to me! Is that the latest or only for your location? Thanks...
the rom seem to boot but wont reboot by himself like its suppose to do.
No service / Wifi ..
Not sure whether this is the right thread but I'd like to know a little more about the baseband function itself. When SE issues new ROMs they are specific to the type of device ie x10a and x10i.
Pretty much all the custom ROMs I've come across are for the x10i. Does this make the device perform diffirently for their designed radio characteristics?
I know of one thread that gave instructions on reflashing x10i that have been previously flashed to x10a(and visa versa) but I cannot seem to get to the bottom of what differences there are.
Do x10a users loose 850MHz if they flash a x10i ROM?
Anone that can point me to the right thread if this is not much appreciated.
http://forum.xda-developers.com/showthread.php?t=965202
allskin;11441429Edit : freeX10 beta 4 INstalled and working with new baseband .55 ![/QUOTE said:
allskin said:
the rom seem to boot but wont reboot by himself like its suppose to do.
No service / Wifi ..
Click to expand...
Click to collapse
So does the most recent edit to your first post mean that you got your service and Wifi working? If so, did it sort itself out or did you have to manually input your APN settings? Just asking because I'm going to update to beta4 from 2.1 baseband .55.
Click to expand...
Click to collapse
I installed JIT v2 using xRecovery on my stock 2.1.1.A.0.6 firmware without issue. It's about 50% faster (not as fast as a 2.2 froyo based rom) than stock.
JDwan said:
So does the most recent edit to your first post mean that you got your service and Wifi working? If so, did it sort itself out or did you have to manually input your APN settings? Just asking because I'm going to update to beta4 from 2.1 baseband .55.
Click to expand...
Click to collapse
Yes its working now and yes it sort itself out
I actually had the same trouble. Now I have no wifi/network connection and no root access even when trying to use the XDAflasher. Any suggestions?
allskin said:
Yes its working now and yes it sort itself out
Click to expand...
Click to collapse
Glad to hear it. I installed Beta 4 and had an issue with it not being able to connect to 3G or H but I just changed the APN settings and I was good to go after that.
Just got a Sony Ericsson X10 and it has Android 1.6. I want to upgrade to the latest version of android and want to enable features like multi touch.. How do i upgrade my phone? I dont know anything about android and most of the posts here have just confused me
Hi - and welcome..
Go to the Sony Ericsson website and download and install SEUS (Sony Ericsson Update Service) to your PC..
Fire that up and follow the onscreen instructions (carefully)..
That will get you upto the latest version of the firmware for your phone..
It may NOT be the latest available firmware though depending on whether your phone is customised by a specific carrier/ network?
If it doesn't upgrade you then look settings and about phone then tell us the country and customisation info in there..
Good luck..
If you're feeling brave you can root it too.. and do a load of other stuff.. (took me a while to build up the courage to get into all that side of it.. but was worth it in the end, cos phone performance can be improved dramatically)!
alamode said:
Just got a Sony Ericsson X10 and it has Android 1.6. I want to upgrade to the latest version of android and want to enable features like multi touch.. How do i upgrade my phone? I dont know anything about android and most of the posts here have just confused me
Click to expand...
Click to collapse
Greets alamode, congrats on your new X10, and welcome to xda.
First off, it's great to hear that you have at least tried to find a place to start with your Android, and I know it can be rather daunting, as well as time consuming.
- If you're only interested in official Sony Ericsson (SE) Firmwares then you can just simply connect your phone to your computer after having installed PC companion on it
and follow the instructions. This should give you the latest official rendition of Android for the X10 which is 2.1 and includes dual touch.
- If however you wish Custom Firmwares which go well beyond anything that Sony could ever offer than I would recommend after having updated through PC Companion
(above) the next step is to 'Root' your X10 which allows you greater access and control over your device and the ability to 'Flash' (install) the many custom Themes, Apps, and ofcourse Firmwares(ROM)s
http://forum.xda-developers.com/showthread.php?t=955703
http://forum.xda-developers.com/showthread.php?t=928343
This should get you started. Read, learn what you can, if you need help/have a question -------> Use the search feature built into this Forum OR even Google it!
Have fun
Thanks for the quick reply guys !..
Well yeah i heard that rooting/flashing your phone opens up a whole new world for you so im definately interested in that. i've heard Sony ericsson wont upgrade X10 to latest versions of android? Can we still update them after rooting/flashing our device?
Anyways ill update my device first from Sony ericsson then.. After that i'll have to root my device? Since i dont know much about rooting/flashing can someone just guide me as to what that is and what it does? Whats the difference between rooting and flashing?
And thanks guys you lot are helpful !
Return it and get a diffrent phone
Sent from my X10i using XDA App
rtblittlebrown said:
Return it and get a diffrent phone
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Um No...
Trying to update but keep getting this : unable to install or start phone software update components
Try doing a repair first then try the upgrade..
For rooting.. go to this thread - http://forum.xda-developers.com/showthread.php?t=906248 download Superoneclick to your pc and run it from there..
Rooting will give you access to the system files so if you start rooting around in there deleting things then it can be dangerous - but you can always reflash/ repair using SEUS.
Rooting will also give you the opportunity to install custom ROMS which you'll find on the Dev sub-forum.
Would also recommend that you install JIT once rooted, as this gives a big performance boost. You'll find that on these x10 forums too.
Alright.. This is so frustrating. Been trying to root my phone all night but not really able to get anywhere.. Here's what i did..
First i finally upgraded to 2.1.. I used another PC and somehow it didnt give me the error i was getting earlier at the other PC. Not sure what was the problem there.
After upgrading to 2.1 i decided to root. First i used the SuperOneClick file to root my phone. After rooting, I installed BusyBox and then kept installing xRecovery but with no luck. xRecovery would just not install !!! I coped the apk file and ran the install from the phone, I got the icon but after getting the icon when it comes to the installing part it just freezes and after a while i get an error which gives me 2 options, Either to force close or to wait. I tried the other method too, the pushing method using X10ModTool and that didnt work either. After lots of tries and after getting extremely frustrated i uninstalled the apps and tried to start fresh.. I unrooted my phone using SuperOneClick and decided to root using z4root. I got the icon in the menu for z4root and i clicked on permanent root.. My phone restarts but i dont see the SuperUser icon anywhere.. If i try to install BusyBox it keeps on saying that its trying to get information..
So, So extremely frustrating !
Oh and i forgot to mention that after upgrading to 2.1, my Phone seems to have become slower while swishing between screens..
Which build number version do you have as the Superoneclick is for 2.1.A.0.435 and 2.0.2.A.0.24.
2.1.A.0.435
Im just not able to get root access ! Ive tried X10 Flash Tool, Ive tried SuperOneClick, Ive tried another software as well.. I just cant seem to get the root access..
I Installed Root checker and everytime after i root i check and it says that you do not have root access.. :S
help !
Update:
Finally made it.. Reset my phone and followed the instructions on this thread: http://forum.xda-developers.com/showthread.php?t=934486
Now i just want to know how can i make the performance of my phone a bit better and now that i have my device rooted, what should i do next with it?
alamode said:
Update:
Finally made it.. Reset my phone and followed the instructions on this thread: http://forum.xda-developers.com/showthread.php?t=934486
Now i just want to know how can i make the performance of my phone a bit better and now that i have my device rooted, what should i do next with it?
Click to expand...
Click to collapse
now install xrecovery: http://forum.xda-developers.com/showthread.php?t=955703#post11379858
for optimizations: http://forum.xda-developers.com/showthread.php?p=11379941#post11379941
alamode said:
Update:
Finally made it.. Reset my phone and followed the instructions on this thread: http://forum.xda-developers.com/showthread.php?t=934486
Now i just want to know how can i make the performance of my phone a bit better and now that i have my device rooted, what should i do next with it?
Click to expand...
Click to collapse
Install xRecovery and then you can even upgrade your phone to 2.2 there are some good ROMS available on this forum, you can check this -> http://forum.xda-developers.com/forumdisplay.php?f=617
Thanks. Yeah i have xrecovery installed as well.
What is basically a ROM? From my understanding its a customized firmware? If so, Which ones the best at the moment? I cannot compromise on functionality (as in i dont want that i cannot use bluetooth/camera/wifi or some other feature because of the rom). So basically i just want a stable rom in which i dont have any limitations. Also what is the advantage of using another rom anyway?
Thanks !
Okay.. ran a few of those optimizations and stuff and the phone is running a bit better. Can you guys tell me what is a good Benchmark score for Stock 2.1 on x10? im getting 33.4 MFLOPS right now.. is that alright?
I still am experiencing a little stutter in the menus, so i installed LauncherPro and that seems to have taken care of it.. I dont understand why cant i get the stutter to go away in the original home screen?
Lastly, Another problem ive been having.. My mobile is connected via USB but instead of it charging up, It is very very slowly losing charge. It went from 95% to 89% in around 45-60 minutes. Whats that all about?
alamode said:
Thanks. Yeah i have xrecovery installed as well.
What is basically a ROM? From my understanding its a customized firmware? If so, Which ones the best at the moment? I cannot compromise on functionality (as in i dont want that i cannot use bluetooth/camera/wifi or some other feature because of the rom). So basically i just want a stable rom in which i dont have any limitations. Also what is the advantage of using another rom anyway?
Thanks !
Click to expand...
Click to collapse
For me the best 2.1 ROM so far is bluesparks, it is very fast and stable. Everything works in this ROM.
As for a 2.2 ROM, i just love wolfbreak's CM6.1.3 v4.3. Everything works except for the camcorder. For getting the camcorder to work you can download video illusion from the market. The quality wont be as good though. However this ROM is just too good. Too fast and stable with good animations.
Sent from my X10i using XDA App
kozxmartt said:
For me the best 2.1 ROM so far is bluesparks, it is very fast and stable. Everything works in this ROM.
As for a 2.2 ROM, i just love wolfbreak's CM6.1.3 v1.4. Everything works except for the camcorder. For getting the camcorder to work you can download video illusion from the market. The quality wont be as good though. However this ROM is just too good. Too fast and stable with good animations.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Is this the 2.2 Rom you were talking about:
http://forum.xda-developers.com/showthread.php?t=945264
Secondly, If i do install this ROM, Will all my applications and everything be deleted? Is there a way to just simply install the ROM and keep everything as it is?
alamode said:
Is this the 2.2 Rom you were talking about:
http://forum.xda-developers.com/showthread.php?t=945264
Secondly, If i do install this ROM, Will all my applications and everything be deleted? Is there a way to just simply install the ROM and keep everything as it is?
Click to expand...
Click to collapse
Yeah, that is the 2.2 ROM I was talking about. Make sure you install the correct one depending on your baseband.
In order to keep everything, make a backup of your apps using titanium backup. You can then restore your apps after installing this ROM. Thats what I did.
Wolfbreak has given another way here:
http://forum.xda-developers.com/showpost.php?p=11394960&postcount=716
Ah thanks, I might go for 2.1 cause of the camcoder.. Any chance of a fix for it coming in 2.2?
Sent from my X10i using XDA App
Ok I just got an x10 that is running 1.6. I know nothing about android phones I was an iphone user so this is very new to me. Do I need to upgrade first or do I need to root it first. Can someone please provide me with the links to the threads I need to do this in? Like I said I am very new to this and I do not want to brick this phone. Also whats the latest version that i can upgrade to where everything works
congratulations on turning away from the darkside!.. There are a few things you can do and it really depends on how far you want to push it..
You can upgrade it then root it and stick largely to the stock ROM - remove any of the junk that you don't need but SE thinks you need.. and install JIT (Just In Time Compiler) to improve performance..
or you can go the whole hog and root it, and flash a custom rom onto it.. this option appears to be slightly riskier - a few people seem to have got very messed up phones doing this - but most (99%?) seem to be okay..
My preference is to upgrade to 2.1 (make sure you've got the dual touch version) - because your in America I assume that you have and X10a - so you'll need to download flashtool to your pc from here. and install the canadian X10a firmware.
probably most of what you want to do is here.
I would recommend you to use the Upgrade Service which is available in Sony Ericsson's website. It has detailed on-screen instructions and I think it is the easiest way to upgrade your phone to the newest 2.1 firmware with dualtouch.
After that, you might find it useful to root your device using binary's flash tool (one-click).
Download the flashtool from Androxyde's thread on the Development forum. Then flash the latest 2.1 FW with the latest baseband and Dual touch. Then use the Root option in the flash tool. Then download Root Explorer app and install XRecovery. At that point you can flash any ROM u want without a PC. That is the easiest wasy to do it and if u follow the directions its foolproof.
Do it all in that order.
Edit: There is no reason to use the SE Update Service if you are going to use the flashtool to root. Everything should be done from the flashtool. And nobody who has followed the procedures has "messed up" their phone by doing any of this. Just dont do anything if you dont know what it is or cant find references on how it works. Because the X10 Bootloader cannot be accessed there is virtually nothing you can do to permanently "brick" your phone, any issues that arise can generally be repaired by restoring a backup or reflashing the FW.
Sent from my X10i using XDA App
don't think he'll be able to upgrade using SEUS.. I don't think that America have released the upgrade! worth a try though, unless someone from that part of the world can confirm
Yes att has no upgrade for USA so don't bother with seus except for repairs.
Sent from my Delorean using a flux capacitor!
CMoney87 said:
Download the flashtool from Androxyde's thread on the Development forum. Then flash the latest 2.1 FW with the latest baseband and Dual touch. Then use the Root option in the flash tool. Then download Root Explorer app and install XRecovery. At that point you can flash any ROM u want without a PC. That is the easiest wasy to do it and if u follow the directions its foolproof.
Do it all in that order.
Edit: There is no reason to use the SE Update Service if you are going to use the flashtool to root. Everything should be done from the flashtool. And nobody who has followed the procedures has "messed up" their phone by doing any of this. Just dont do anything if you dont know what it is or cant find references on how it works. Because the X10 Bootloader cannot be accessed there is virtually nothing you can do to permanently "brick" your phone, any issues that arise can generally be repaired by restoring a backup or reflashing the FW.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I agree with this. I started this week with an X10a and fully upgraded to 2.1.1 sumting..anyways I did "brick" my phone once but no worries I just reflashed using the remove battery method and flash tool. While I did have everything working my battery died from a full charge overnight. So now I'm using Erick Will's Custom .435+Arc+Timescape. Most stable from what I've read so far.
Check these out:
DooMLoRD Everything you need to know .pdf file
http://forum.xda-developers.com/showthread.php?t=955703
Androxyde new lead on Flash Tool (works great and simple to use!)
http://forum.xda-developers.com/showthread.php?p=10738467
drdownload compilation of available roms
http://forum.xda-developers.com/showthread.php?t=987795
rendeiro2005 Baseband collection should you want to try a different flavor of 3g management
http://forum.xda-developers.com/showthread.php?t=960527
I got my X10 about a week ago (was free from my Sony Rep) and as soon as I got it, I rooted and flashed 2.1 on it (baseband .54). To root I used android central sideload wonder machine.
To flash 2.1 I used flashtool as stated in an earlier post. Once 2.1 is installed find the ROM you want to run, and use xRecovery to flash it. I personally think CM 6.1.3 is one the better ROMs out there, but find the one that works for you.
X10a running CM 6.1.3 using XDA App
I should make it clear that I fully upgraded to latest Rogers fw using pc companion, saw the incredible drain on battery then bricked my phone. :O I was trying to tweak it and I over-tweaked.
Sent from my X10a using XDA App
Hello,
I am looking for the last pre ICS firmware for my SK17i. I am currently back on 4.0.2.A.0.42 since ICS was not the best performance wise and the notification LED didn't work (please let's not discuss ICS vs. GB here)
So now I wanted to flash the latest pre-ICS firmware which as far as I know is 4.0.2.A.0.69 (only for germany, but that's where I live). Or 4.0.2.A.0.62 which maybe is easier to find. Now I do know about the !PreRooted 4.0.2.A.0.69 in this thread. However I had quite a few problems with aswell as others described in this thread. Most importantly the flashlight wasn't working at all, the keyboard layout was way off (not just qwerty instead of my german qwertz). I'd really appreciate any help in this matter.
Also: I am a complete newb concerning android but I tried my beast to research this before posting
Thanks,
SM
Keyboard layout depends on the firmware region.
Flashlight problem seems to be related to the baseband, I have heard. Even though I kind of doubt it, but still worth of trying.
If you root your .42, you should be able to update via OTA (it means via WiFi and the app Update Centre) to the last 2.3.4 build without loosing root
Thanks Feanor88! I had only opened the update centre once and it told me everthing was up to date (forgot to refresh/recheck via menu).
Now it show's the international 4.0.2.A.0.62 Upgrade. But if I try to install it it reboots a couple of times and then starts up with the old FW and tells me the install was not possible and I should try again. Which I did with the same outcome. Any Idea what could be the hinderance? I'm rooted with CWM installed, bootloader is locked (never touched it).
Suicide Machine said:
Thanks Feanor88! I had only opened the update centre once and it told me everthing was up to date (forgot to refresh/recheck via menu).
Now it show's the international 4.0.2.A.0.62 Upgrade. But if I try to install it it reboots a couple of times and then starts up with the old FW and tells me the install was not possible and I should try again. Which I did with the same outcome. Any Idea what could be the hinderance? I'm rooted with CWM installed, bootloader is locked (never touched it).
Click to expand...
Click to collapse
CWM is the trouble creator. You will need to come back to stock and then try.
Cheers,
Rick
Sent from my SK17i using XDA
DragonClawsAreSharp said:
CWM is the trouble creator. You will need to come back to stock and then try.
Click to expand...
Click to collapse
Thank you, that did it. Now I'm on the .62 GB firmware which I'm much happier with than ICS. At least now my Sound in Navigon and Skype work correctly, aswell as the notification LED and games like Osmos don't randomly quit