I boot my vibrant into recovery mode. I did not see the command that allow me to install app from sd card. do i need special program for that. In recovery mode only has: REBOOT SYSTEM NOW
REINSTALL PACKAGES
DELETE ALL USER DATA
DELETE CACHE DATA
FORMAT INTERNAL SD-CARD
I did not see the line that ask to install from sd-card. how do i added on there. please help. Thank you.
sienna3185 said:
I boot my vibrant into recovery mode. I did not see the command that allow me to install app from sd card. do i need special program for that. In recovery mode only has: REBOOT SYSTEM NOW
REINSTALL PACKAGES
DELETE ALL USER DATA
DELETE CACHE DATA
FORMAT INTERNAL SD-CARD
I did not see the line that ask to install from sd-card. how do i added on there. please help. Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=734164
read and follow the instructions
i down load rom manger and still can not get it.
I try it when reinstall packaged, it came up message E:failed to verify whole-file signature
E: signature verification fail
installation aborted
I don't know why?
sienna3185 said:
i down load rom manger and still can not get it.
I try it when reinstall packaged, it came up message E:failed to verify whole-file signature
E: signature verification fail
installation aborted
I don't know why?
Click to expand...
Click to collapse
youre not rooted......id like to help you, but you clearly have not done any of your own research......http://forum.xda-developers.com/showthread.php?t=876779 good luck
Ok! Just follow the links posted ...
closed Thread!
Related
I installed the update zip to what I THINK is the internal hardrive. I see a folder that says exteranl but not one that says internal hardrive. But when im in recovery system and i click reinstall packages this pops up
E:failed to open /mt/internal_sd/update.zip (such file or directory)
E: signature verification failed
Installation aborted
How can i fix this
Based Moses said:
I installed the update zip to what I THINK is the internal hardrive. I see a folder that says exteranl but not one that says internal hardrive. But when im in recovery system and i click reinstall packages this pops up
E:failed to open /mt/internal_sd/update.zip (such file or directory)
E: signature verification failed
Installation aborted
How can i fix this
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=849028
get the update.zip from there ??
either get rom manager and flash clockwork then go to recovery and reinstall packages twice or get the update.zip from the link above and reinstall packages twice and that'll take you to clockwork recovery
you sound like you have stock froyo - which means you have the 3E stock recovery.
I suggest following my guide (signature - noobs).
EDIT - ha, just realize Kyle already linked to it, thanks man.
Hey all, I posted this on CM's forums as well but haven't gotten any replies so I figured I'll try this forum as well. I'm a new to mod installations so forgive if some of these questions are redundant/plain stupid. I figure it's better to ask a stupid question though, than to brick my phone.
Anyways, here goes:
So I have installed ClockworkMod (free) and created a recovery.
I copied a stable version of CM into my root folder (update-cm-7.1.0-GalaxyS2-signed.zip)
Now to install it do I go into ROM Manager, and under ROM Management select "Install ROM from SD Card"? Then check off the 3 options and hit ok, and reboot into recovery on the next popup window?
Finally...when the phone reboots into "Android System Recovery"..I see this:
Android system recovery <3e>
Enter: OK Key, Select: VOL UP/DOWN
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
-- Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature...
E:signature verification failed...
Installation aborted.
Click to expand...
Click to collapse
So do I go into "apply update from sd card" and select the CM zip file?? And after that I see there's mention of another zip file simply labelled "update.zip"...its also in my root. So I use that AFTER CM.zip right?
And finally...whats up with the errors there while installing the package? Is that ok?
Thanks! And sorry if this is the wrong forum. I didn't spot a specific mod-related forum here.
nubreed000 said:
Hey all, I posted this on CM's forums as well but haven't gotten any replies so I figured I'll try this forum as well. I'm a new to mod installations so forgive if some of these questions are redundant/plain stupid. I figure it's better to ask a stupid question though, than to brick my phone.
Anyways, here goes:
So I have installed ClockworkMod (free) and created a recovery.
I copied a stable version of CM into my root folder (update-cm-7.1.0-GalaxyS2-signed.zip)
Now to install it do I go into ROM Manager, and under ROM Management select "Install ROM from SD Card"? Then check off the 3 options and hit ok, and reboot into recovery on the next popup window?
Finally...when the phone reboots into "Android System Recovery"..I see this:
So do I go into "apply update from sd card" and select the CM zip file?? And after that I see there's mention of another zip file simply labelled "update.zip"...its also in my root. So I use that AFTER CM.zip right?
And finally...whats up with the errors there while installing the package? Is that ok?
Thanks! And sorry if this is the wrong forum. I didn't spot a specific mod-related forum here.
Click to expand...
Click to collapse
Use this link here, i think your problem is you afe flashing with rom manager you should use CWM for a first time install and you need to flash twice back to back to ensure a clean install.
I'm trying to install a mod from the online kitchen but all i get is:
Error in /sdcard/mymod.zip
(Status 0)
Installation aborted
Even if i make an other rom, install an other version of CWM or SU or when I try to install it from the internal sd it gives me the same error.
I also tried to flash a different kernel, but no succes.
Any suggestions?
Flash a new CWM and Root kernel.
jje
you might have a corrupted download, redownload the mod.
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
keijers said:
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
Click to expand...
Click to collapse
strong suspect is your zip file containing the mod. did you try toggling signature verification?
Are you trying from Kitchen or from CWM..
Place on int.SD and flash manually from CWM,
if other files are flashed then definetely CWM is preventing you afrom a wrong flashing...
i've tried to change my batteryicons with this guide and that works:
http://forum.xda-developers.com/showthread.php?t=1434061
But i want to do it via the UOT kitchen, because i want the lockscreen mod too.
This is what i did:
I've uploaded framework-res, twframework-res, systemui and applied the battery mod and the lockscreen mod, nothing else. Then I clicked submit to kitchen, downloaded the zip and flashed it to my device throuw cwm, and i got error 0.
Should i try other scripting in UOT?
maybe i'm stupid but can it also be that i'm on stock rom (rooted) ics 4.0.3 xen lp7?
Hey,
If you check their official XDA Thread:
http://forum.xda-developers.com/showthread.php?t=990829
You will notice (In the second post: http://forum.xda-developers.com/showpost.php?p=12049814&postcount=2) that it is only compatible with Froyo/Gingerbread Roms.
You can't use it with ICS mate, and this is probably why you are getting the error while trying to flash it.
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
same problem with u
keijers said:
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
Click to expand...
Click to collapse
Even though this is the case all hints include that this is froyo/gingerbread only
Sent from my GT-I9100 using XDA
have you mounted your /system or /data ... ?
once had same problem, this fixed it
CJCord said:
have you mounted your /system or /data ... ?
once had same problem, this fixed it
Click to expand...
Click to collapse
Thank you CJCORD!. i was the same problem and i unmount the /system and install the su!
I'm having the same issue in JB, zip packages that i perfectly installed on GB can't be installed now because of the Status 0
simply go to Mount and Storage option, through CWM and unmount system and data.
Demsee said:
simply go to Mount and Storage option, through CWM and unmount system and data.
Click to expand...
Click to collapse
I can't unmount data, what can I do?
error in sdcard status 0 insatllation aborted pls solve it
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
raerosaine11 said:
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
Click to expand...
Click to collapse
Hello I am having the same problem, could you solve yours?
Please let me know how did you do.
Regards
Hi guys. I absolutely screwed up trying to install CWM to my player, and managed to get it stuck in download/recovery mode only. I somehow managed to install Steve's kernel, which at least gives me a more functional recovery (CWM), but I am still unable to get my player to run normally (I'll click reboot in CWM and it will reboot back to CWM). At the very least, I would like it to get back up and running again. I tried putting .zip files on an external sd card and installing them via CWM, but for whatever reason my player can't the .zips.
If anyone could help me flash back to a stock rom or something that would be fantastic. Thank you.
Edit: Just to clarify, my player is 4.0 USA. Also, many of the recovery files that have been posted here have been removed.
Xpwnage123 said:
Hi guys. I absolutely screwed up trying to install CWM to my player, and managed to get it stuck in download/recovery mode only. I somehow managed to install Steve's kernel, which at least gives me a more functional recovery (CWM), but I am still unable to get my player to run normally (I'll click reboot in CWM and it will reboot back to CWM). At the very least, I would like it to get back up and running again. I tried putting .zip files on an external sd card and installing them via CWM, but for whatever reason my player can't the .zips.
If anyone could help me flash back to a stock rom or something that would be fantastic. Thank you.
Edit: Just to clarify, my player is 4.0 USA. Also, many of the recovery files that have been posted here have been removed.
Click to expand...
Click to collapse
First of all download this stock recovery rom for the USA 4.0 found here (thank zalcimon please) http://www.mediafire.com/?aodm44hzan3jauo
Now you must install Samsung Kies on your PC to get the correct drivers. Then you must download and install odin found here:
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=ZjUHLCkIbG1_EprOk9enrA. After that you need to put the player into download mode, by first turning off the player completely and then to put it into download you must (Hold volume down and power).
Here's the fun step. Open up Odin and make sure only Auto Reboot and F. Reset Time are checked or YOU WILL BRICK YOUR DEVICE *THE HORROR*. Plug the Galaxy Player into the USB Port (while it's still in download mode) and Under ID:COM it should say something like 0:[COM4] and is yellow. Where it says message it should say "Added!!"
You have to now hit PDA and select the .md5 or .tar file(this is the recovery rom you downloaded early). Hit Start and it should take about 2-4 minutes to finish. If you get bootloops then you must turn off the player, and put it into the stock recovery. Hit wipe data/factory reset, and Wipe cache Partition.
Flashing a kernel is very easy when you use odin. Basically it's the same steps as flash a rom. All you have to do is hit PDA select steve s kernel (make sure it's the .tar file) and hit start. It should take about 10 seconds and you're done hope this helps.
obscuresword said:
First of all download this stock recovery rom for the USA 4.0 found here (thank zalcimon please) http://www.mediafire.com/?aodm44hzan3jauo
Now you must install Samsung Kies on your PC to get the correct drivers. Then you must download and install odin found here:
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=ZjUHLCkIbG1_EprOk9enrA. After that you need to put the player into download mode, by first turning off the player completely and then to put it into download you must (Hold volume down and power).
Here's the fun step. Open up Odin and make sure only Auto Reboot and F. Reset Time are checked or YOU WILL BRICK YOUR DEVICE *THE HORROR*. Plug the Galaxy Player into the USB Port (while it's still in download mode) and Under ID:COM it should say something like 0:[COM4] and is yellow. Where it says message it should say "Added!!"
You have to now hit PDA and select the .md5 or .tar file(this is the recovery rom you downloaded early). Hit Start and it should take about 2-4 minutes to finish. If you get bootloops then you must turn off the player, and put it into the stock recovery. Hit wipe data/factory reset, and Wipe cache Partition.
Flashing a kernel is very easy when you use odin. Basically it's the same steps as flash a rom. All you have to do is hit PDA select steve s kernel (make sure it's the .tar file) and hit start. It should take about 10 seconds and you're done hope this helps.
Click to expand...
Click to collapse
Thanks for the reply. You're giving me a better idea of what exactly it is that I need to do.
Unfortunately, I already tried flashing the recovery rom in Odin, but it doesn't work because it's a zip file. I tried unzipping it in both WinRar and 7Zip, but all I get is a folder with several items in it. I can't properly flash back to stock because I don't have a stock .tar file.
Xpwnage123 said:
Thanks for the reply. You're giving me a better idea of what exactly it is that I need to do.
Unfortunately, I already tried flashing the recovery rom in Odin, but it doesn't work because it's a zip file. I tried unzipping it in both WinRar and 7Zip, but all I get is a folder with several items in it. I can't properly flash back to stock because I don't have a stock .tar file.
Click to expand...
Click to collapse
Dang it lol. I have the .tar file, and I'm going to use a site called www.transferbigfiles.com that lets you email big files to people. However, the good thing is that they let you share links. Here it is https://www.transferbigfiles.com/dd8765db-edaf-4d58-a798-3d091429974c/hfVImIZm4TURWTX05abOQw2. Be warned though this will only be here for 5 days so download it in this time please.
obscuresword said:
Dang it lol. I have the .tar file, and I'm going to use a site called www.transferbigfiles.com that lets you email big files to people. However, the good thing is that they let you share links. Here it is https://www.transferbigfiles.com/dd8765db-edaf-4d58-a798-3d091429974c/hfVImIZm4TURWTX05abOQw2. Be warned though this will only be here for 5 days so download it in this time please.
Click to expand...
Click to collapse
why just not use the stock in zaclimon's recovery thread
goldflame09 said:
why just not use the stock in zaclimon's recovery thread
Click to expand...
Click to collapse
I did lol, but apparently the file that is used for odin isn't a .tar/.md5 file.
obscuresword said:
I did lol, but apparently the file that is used for odin isn't a .tar/.md5 file.
Click to expand...
Click to collapse
dont mean to be mean, but what are you taking about.
he has links, separate but there, for both odin and heimdall packages.
goldflame09 said:
dont mean to be mean, but what are you taking about.
he has links, separate but there, for both odin and heimdall packages.
Click to expand...
Click to collapse
I removed odin because too much people were complaining about it not working...
zaclimon said:
I removed odin because too much people were complaining about it not working...
Click to expand...
Click to collapse
Ohhhhh ok nvm then. I think I still have a stock rom rooted that is less in size but for us devices only
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
goldflame09 said:
Ohhhhh ok nvm then. I think I still have a stock rom rooted that is less in size but for us devices only
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
Click to expand...
Click to collapse
If you can upload it permanently then that would be nice.
goldflame09 said:
dont mean to be mean, but what are you taking about.
he has links, separate but there, for both odin and heimdall packages.
Click to expand...
Click to collapse
I tried those, but obscuresword was correct in stating that the files linked aren't in .tar or .md5 format, and thus they can't be flashed with odin.
Anyways, I tried the file that obscure linked and I am still unable to get out of recovery. I basically get a bunch of red text every time I try to do something (like wipe data), and when I try to reboot it just reboots me into recovery once again. This is the same issue I was having earlier, so for the time being I have flashed an alternative kernel that at least has a recovery that is a little more functional. I still go back into recovery when I reboot though.
Xpwnage123 said:
I tried those, but obscuresword was correct in stating that the files linked aren't in .tar or .md5 format, and thus they can't be flashed with odin.
Anyways, I tried the file that obscure linked and I am still unable to get out of recovery. I basically get a bunch of red text every time I try to do something (like wipe data), and when I try to reboot it just reboots me into recovery once again. This is the same issue I was having earlier, so for the time being I have flashed an alternative kernel that at least has a recovery that is a little more functional. I still go back into recovery when I reboot though.
Click to expand...
Click to collapse
What are your red errors?
obscuresword said:
If you can upload it permanently then that would be nice.
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showpost.php?p=41424020&postcount=384
zaclimon said:
What are your red errors?
Click to expand...
Click to collapse
Ok I basically get a bunch of "Can't mounts" and "Can't opens". For instance, when I boot into recovery it says this:
-- Copying media files...
E:Failed to mount /dbdata (Invalid argument)
E:copy_dbdata_media:Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions
Media files copy failed.
# MANUAL MODE #
-- Appling Multi-CSC...
Successfully applied multi-CSC.
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open/cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
I also tried the new stock rom that was linked, but it resulted in the exact same thing.
Xpwnage123 said:
Ok I basically get a bunch of "Can't mounts" and "Can't opens". For instance, when I boot into recovery it says this:
-- Copying media files...
E:Failed to mount /dbdata (Invalid argument)
E:copy_dbdata_media:Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions
Media files copy failed.
# MANUAL MODE #
-- Appling Multi-CSC...
Successfully applied multi-CSC.
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open/cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
I also tried the new stock rom that was linked, but it resulted in the exact same thing.
Click to expand...
Click to collapse
And I suppose that you have wiped data right?
zaclimon said:
And I suppose that you have wiped data right?
Click to expand...
Click to collapse
Yup, tried that. I get errors when trying to do that too.
Xpwnage123 said:
Yup, tried that. I get errors when trying to do that too.
Click to expand...
Click to collapse
Wait do you re-partition when you do this? (with the odin I posted, not goldflame's one).
zaclimon said:
Wait do you re-partition when you do this? (with the odin I posted, not goldflame's one).
Click to expand...
Click to collapse
ya DO NOT REPARTITION WITH THE ONE I GAVE YOU.
that only includes the factoryfs.rfs and zimage and not all the other partitions like data
goldflame09 said:
ya DO NOT REPARTITION WITH THE ONE I GAVE YOU.
that only includes the factoryfs.rfs and zimage and not all the other partitions like data
Click to expand...
Click to collapse
I definitely did NOT re-partition on any of them
Xpwnage123 said:
I definitely did NOT re-partition on any of them
Click to expand...
Click to collapse
Go to the recovery thread and download the new odin one that zac put up and repartition using that one
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
-- Installing: /sdcard/Rom.zip
Finding update package...
Opening update package...
E: Can't open /data/media/0/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Alvarogb91 said:
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
- Installing: / storage/sdcard1/Rom.zip
Finding update package ...
Opening update package ...
E: Can not open / storage/sdcard1/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Click to expand...
Click to collapse
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
necrosauron said:
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
Click to expand...
Click to collapse
I installed the new version of recovery but I have the same problem
Alvarogb91 said:
I installed the new version of recovery but I have the same problem
Click to expand...
Click to collapse
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
necrosauron said:
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
Click to expand...
Click to collapse
Thanks the file was the problem, I have download again the file and the install was succesfull.
Alvarogb91 said:
Thanks the file was the problem, I have download again the file and the install was succesfull.
Click to expand...
Click to collapse
ok bro...glad to help you...:laugh:
hit the thanks button for the next time..
regards:good: