So, hi guys I think the last time I posted on these forums I was asking some obvious "read the damn wiki noob" questions on the XDA Exec - I didn't brick it in the end, hooray!
But now I have a streak and I'm having a few issues.
I bought a 31-baseband US AT&T over eBay and unlocked it so I can use my UK Orange sim in it. That worked perfectly but it was still on 1.6 and I highly doubt Orange would be issuing an OTA froyo update any time soon.
So I tried various .pkg steps first to change the build to 4399 with a 21 baseband. Ultimately, it didn't matter what .pkg I tried, any of the dedicated custom recovery images invariably lead to a black screen and I couldn't update. That's probably me being a spazz and not reading enough, I'm not sure...
...So instead, I used the Custom 1.6 ROM from Modaco (the one with the online kitchen thread?), and it worked - I was then on 4399 with a 21 baseband, untill my friend told me he'd easily put DJ Steve's 1.5.1 ROM on it with a view to update it to 1.6.1. I hadn't heard of the DJ Steve ROM yet so I said no and he did it anyway. And that's when the bad times happened - It was in a bootloop from there.
Since then I've tried many .zip updates and many .pkg updates. Currently I'm trying to go back to the Modaco custom 1.6 ROM but it's in the second stage boot and crashing (the DELL logo flickers, then remains constant - the home and the menu button continuously flash for a while etc)...
So it's kinda bricked, and nothing I'm doing helps. Even the boot restore thing that my "friend" has for his streak hasn't done much.
I know what you guys are like with the whole "do s'moe reading, kid" thing but I honestly dunno what to do anymore. It's been like this since Tuesday and I've exhausted everything. Thankfully I don't have much of a job at the moment so I've had lots of free time to do some more googling and searching these forums for similar issues (so if I've missed a vital thread, please let me know) as well as modaco.
_any_ help would be amazing, like I say, and full of <3.
Thanks in advance guys!
SyRenLolZ said:
So, hi guys I think the last time I posted on these forums I was asking some obvious "read the damn wiki noob" questions on the XDA Exec - I didn't brick it in the end, hooray!
But now I have a streak and I'm having a few issues.
I bought a 31-baseband US AT&T over eBay and unlocked it so I can use my UK Orange sim in it. That worked perfectly but it was still on 1.6 and I highly doubt Orange would be issuing an OTA froyo update any time soon.
So I tried various .pkg steps first to change the build to 4399 with a 21 baseband. Ultimately, it didn't matter what .pkg I tried, any of the dedicated custom recovery images invariably lead to a black screen and I couldn't update. That's probably me being a spazz and not reading enough, I'm not sure...
...So instead, I used the Custom 1.6 ROM from Modaco (the one with the online kitchen thread?), and it worked - I was then on 4399 with a 21 baseband, untill my friend told me he'd easily put DJ Steve's 1.5.1 ROM on it with a view to update it to 1.6.1. I hadn't heard of the DJ Steve ROM yet so I said no and he did it anyway. And that's when the bad times happened - It was in a bootloop from there.
Since then I've tried many .zip updates and many .pkg updates. Currently I'm trying to go back to the Modaco custom 1.6 ROM but it's in the second stage boot and crashing (the DELL logo flickers, then remains constant - the home and the menu button continuously flash for a while etc)...
So it's kinda bricked, and nothing I'm doing helps. Even the boot restore thing that my "friend" has for his streak hasn't done much.
I know what you guys are like with the whole "do s'moe reading, kid" thing but I honestly dunno what to do anymore. It's been like this since Tuesday and I've exhausted everything. Thankfully I don't have much of a job at the moment so I've had lots of free time to do some more googling and searching these forums for similar issues (so if I've missed a vital thread, please let me know) as well as modaco.
_any_ help would be amazing, like I say, and full of <3.
Thanks in advance guys!
Click to expand...
Click to collapse
QDL tool. It will put you on the 305 pre release of Froyo. From there you can jump to 318 or any of steve's froyo's. I just flashed the 322 update and went to steve's 1.7.0 and my streak is running perfectly!
But I think I'm obligated to say it. A little reading and you could have found this on your own.
Follow the link. Hope it helps!
You're very right there indeed, and funnily enough i'd even found it on the StreakMod site eventually last night when i'd assumed it was well and truly bricked. That's excellent though. Thanks very much and once again I'd like to apologise for being so shortsighted sometimes when it comes to these things.
Solved, and written on my Streak. <3
Related
Hey there, I've been anxious to flash my xv6800. I've been reading and searching extensively in the forums and FAQs and the Wiki (I don't usually post until my frustration is out of control). I've found some useful info here:
How-to for Wizard
http://forum.xda-developers.com/showthread.php?t=298613
but didn't see the G3/G4 designation on my splash screen (dead end)
How do I go about flashing to a DCD rom (or any custom rom for that matter)? Is there software I need to install on my comp and are there any steps specific to the xv6800 verizon firmware?
I would really appreciate any help. Thanks
I'm in a similar situation to you. I found this helpful guide the wiki here and it got me started. I also posted a similar plea on the DCD's Titan Rom thread so see if a response turns up there. Good luck and PM me if you find anything helpful. The title of your thread makes it a good place to post for the likes of us.
edit: I bet if this was made a sticky and some informed people posted some helpful info, us noobs would stay out of other threads asking for answers. (sound of kitten stuck in tree)
i need help too
well i got impatient and just downloaded dcd 1.6.10 and just clicked on the .exe without doing anything else. its currently doing its thing, hope it works!
You so crazy! I hope that works, but I have my doubts. The version you're referring to, 1.6.10, is for DCD's Titan kitchen. AFAIK, the kitchen's for cooking your own rom. Cooking is different from flashing as far as I can tell. I think you'll now find that you're ready to make your own rom on your PC, but that still leaves us unsure of how to prepare for and execute the actual rom replacement on the Titan. Right, wrong, Bueller?
it didnt work. it was stuck at 0% forever and then gave an error. i took the battery out and back in and am back to how i was before. no brick
i think i need some sort of bootloader. "re-locker" ? i cant find this when searching.
i thought dcd 1.6.10 is a rom for everyone, and kitchen is for those who want to make their own roms? im so confused.
http://forum.ppcgeeks.com/showthread.php?t=9927
excellent. Thanks!
fusQer said:
it didnt work. it was stuck at 0% forever and then gave an error. i took the battery out and back in and am back to how i was before. no brick
i think i need some sort of bootloader. "re-locker" ? i cant find this when searching.
i thought dcd 1.6.10 is a rom for everyone, and kitchen is for those who want to make their own roms? im so confused.
Click to expand...
Click to collapse
I tried to load dcd's and the official rom and the same thing happens to me, stuck at 0% then connection error.
Been trying to get some info from ppcgeeks.com but the forum has been down since yesterday.
What are we doing wrong?
Throw you a bone
OK, you guys sound real clueless (actually only a little more clueless than me!) so I'll help out. The ROM by itself is all ready to flash to your phone, like reinstalling a new operating system on your PC. The kitchen can be used to customize your own ROM, but I'd suggest you guys read up a bit more before going here. The garden variety ROMs that DCD and others provide is fine for now.
There are utilities on this forum to get you out of the bootloader screen if you get stuck (heppened to me last night). Search around a bit, and certainly read up a bit before flashing. These things are real complicated, but it takes a bit of understanding because the steps MUST be done in the right order, and many impatient folks dive in and get screwed, then complaign to the folks who gave them the files to begin with!
jorge_culv
Maybe ur misunderstanding what's happening.
Whenever I try to flash the device Windows Mobile Device Center closes both the screen on my Mogul and the window on the host pc never moves from 0%
Hope that helps
OK - I'm new to this also but have a question. I know data is lost so does that mean I need to re-establish all my email accounts and contact lists? I installed the cab to allow you-tube and bluetooth data to my tomtom. Also the Touch commander. Is all that gone and I have to redo that as well? Is there a suggested utility to back up as much as possible to restore? I sync with my company email via exchage. Right now everything is basically working fine so hate to take a chance.
Regards... Steve
I've an O2 streak, Firmware 1.6 build 3883 the baseband ends in -EU, I'm an O2 UK customer oem version ends in 21
After much researching I decided to upgrade to 2.1 so downloaded the O2 upgrade (update-6941-21.pkg) it seems this is the best build.
Copied file to sd card, renamed to update.pkg , double checked the md5 sum was correct then powered off the phone. I'm using Linux to copy files to the sdcard.
Held down both volume keys while powering on, selected second option (update), screen went black but a light could be seen behind it.
At this stage I'm not sure what to expect, the phone doesn't appear to do anything. None of the instructions tell you how long to wait, I expected 10 to 15 minutes max, after an hour and no change I reluctantly pulled the battery, the phone booted straight up into the old operating system (phew).
Tried an official 1.6 rom 4399 build, exactly the same result.
Is my phone being treat as if it has a custom rom is one idea that I'm considering, anyone had a similar experience, anyone offer any suggestions ?.
It's not as simple as just putting the .img file on your SD card. You have to flash a stock recovery. There's a sticky called "Complete Guide to Flashing Your Streak" or something close, that will hold all your answers.
*edit*
Here:
http://forum.xda-developers.com/showthread.php?t=776883
Personally I wouldn't even bother with 2.1
Goto the guide N upgrade to dj_Steve's 2.2 if I follow the guide it's quite straight forward N there is always plenty of help here if u get stuck
DJ_Steve has done a amazing job N made the streak what it should have been. I love BBC iplayer on it..although I now keep going over my T-Mobile broadband allowance LOL
Sent from my Dell Streak using XDA App
Charles: said:
It's not as simple as just putting the .img file on your SD card. You have to flash a stock recovery. There's a sticky called "Complete Guide to Flashing Your Streak" or something close, that will hold all your answers.
*edit*
Here:
http://forum.xda-developers.com/showthread.php?t=776883
Click to expand...
Click to collapse
Thanks for the reply.
It's not apparent to a newbie that to upgrade from a stock rom to another stock rom that you need to flash a stock recovery, at least it wasn't to me (being thick ?).
Maybe it's just a little piece of knowledge that people who've done this before take for granted and it never crosses their mind that newcomers would think otherwise.
Before you replied I managed to upgrade by doing as you said, I flashed the stock recovery with fastboot, put update.pkg on the sd card, held my breath and lo and behold I saw a screen that allowed me to continue (I'm going to try and take a photo of this for other newcomers benefit as in all the posts I read nothing indicated what you should see when upgrading).
I tried upgrading from build 8443 to 2.1 but ended up stuck at the Dell logo, (this was an early build that many people said was better than the last 2.1 release).
Tried upgrading again (different version) and finally managed to get 2.1 on the Streak.
Now for 2.2
Thanks for your help in any case, much appreciated.
I received my new GTablet day before yesterday from Amazon. I read through a lot of forums before deciding to buy it. Out of the box, I charged it and connected it to the wireless network. Worked fine. It got updated as well. I tried few options and play with it a bit and then the most awful thing happened. I got this message "Sorry The application Dashboard Home (process com.tapntap.homne) has stopped unexpectedly. Please try again"
I tried power + volume but it didnt help. I want to go through the whole clockmod and tnt 2.4 update but right now I am stuck. Viewsonic supports recommed to send it back to Amazon and a get a newone. But if there is a way to start using my Gtablet 'now', please let me know. If I use the Clockmod, will I get stuck and will never be able to return it? I NEEED HELP...
coolrazas said:
I received my new GTablet day before yesterday from Amazon. I read through a lot of forums before deciding to buy it. Out of the box, I charged it and connected it to the wireless network. Worked fine. It got updated as well. I tried few options and play with it a bit and then the most awful thing happened. I got this message "Sorry The application Dashboard Home (process com.tapntap.homne) has stopped unexpectedly. Please try again"
I tried power + volume but it didnt help. I want to go through the whole clockmod and tnt 2.4 update but right now I am stuck. Viewsonic supports recommed to send it back to Amazon and a get a newone. But if there is a way to start using my Gtablet 'now', please let me know. If I use the Clockmod, will I get stuck and will never be able to return it? I NEEED HELP...
Click to expand...
Click to collapse
Do you have clockwork mod on it? If you DO put it on there, you CAN get it back off and return the unit to stock, so don't worry too much about that. You have to perform an nvflash though (which is not necessarily harder than installing clockwork mod or a custom rom, but can be problematic at times.)
The thread on that is here: http://forum.xda-developers.com/showthread.php?t=861950
If it were me, I would give installing clockwork mod a try and update to the newest viewsonic rom or try one of the custom roms such as Vegan, TnT Lite or TwoTapsX.
Hopefully it works out for you - I'm confident it will. These things are almost impossible to brick.
Thanks a lot for a quick reply. So the way I understood....
1: I need to install Clockmod and that will bring the Gtablet back to Stock
2: After that I need to do the nvflash
3: and then I can install tnt2.4
Does that make sense.... Do I need to do the nvflash.. Just from the look of it, it seems kind of complex.
Again I really appreciate your quick reply on this.
gogorman said:
Do you have clockwork mod on it? If you DO put it on there, you CAN get it back off and return the unit to stock, so don't worry too much about that. You have to perform an nvflash though (which is not necessarily harder than installing clockwork mod or a custom rom, but can be problematic at times.)
The thread on that is here: http://forum.xda-developers.com/showthread.php?t=861950
If it were me, I would give installing clockwork mod a try and update to the newest viewsonic rom or try one of the custom roms such as Vegan, TnT Lite or TwoTapsX.
Hopefully it works out for you - I'm confident it will. These things are almost impossible to brick.
Click to expand...
Click to collapse
coolrazas said:
Thanks a lot for a quick reply. So the way I understood....
1: I need to install Clockmod and that will bring the Gtablet back to Stock
2: After that I need to do the nvflash
3: and then I can install tnt2.4
Does that make sense.... Do I need to do the nvflash.. Just from the look of it, it seems kind of complex.
Again I really appreciate your quick reply on this.
Click to expand...
Click to collapse
1. No. ClockworkMod does not bring the tablet back to stock. It makes it easier to flash custom ROM's and backup your tablet.
2. No. You do not have to nvflash after installing Clockwork. That would remove it.
3. Sort of. You can go right to installing a custom ROM as soon as you have ClockworkMod installed. DO NOT use TwoTapsX if you have installed ClockworkMod. It will not work and will result in you having to do an nvflash. TnT_Lite will work just fine.
coolrazas,
I think you should be cautious!! VS has told you to exchange it. That might not be a
bad idea.
BUT, it all depends on how serious the original error was. And I haven't heard an
authoritative answer on that yet.
IF you can handle all the stuff that's been suggested -- you might make it good as
new. But you also could have more problems.
I know you are anxious to have the tab and be up and running -- but I'd make darn
sure I had a good one first even if that means sending it back.
Rev
I agree. I think I can handle the techie stuff (new to android but seasoned on Windows platform) but you are right. If the hardware is faulty then I will be facing the same problem again. When I called Viewsonic Customer support, they said that they are aware of this issue so just send it back. She was pretty straight on the phone.
And again, I have to ask this question. Why in the world isn't viewsonic spending more resources on software? With better software, the gtab would be in direct competition with both the xoom and ipad 2.
I completely agree. If the issues are known and after reading tons of information on xda forum, its insane not to listen to this large customer base and really bring this tablet to the next level and capture a larger chunk of the market. Pretty amazing.
K J Rad said:
1. No. ClockworkMod does not bring the tablet back to stock. It makes it easier to flash custom ROM's and backup your tablet.
2. No. You do not have to nvflash after installing Clockwork. That would remove it.
3. Sort of. You can go right to installing a custom ROM as soon as you have ClockworkMod installed. DO NOT use TwoTapsX if you have installed ClockworkMod. It will not work and will result in you having to do an nvflash. TnT_Lite will work just fine.
Click to expand...
Click to collapse
This is an excellent point - I should have mentioned this in my original reply.
coolrazas said:
I tried power + volume but it didnt help.
Click to expand...
Click to collapse
Did you let it actually restore the factory default? My Gtab did the same thing (I just got it last week) and I had to reset it. It's odd that the factory reset is different than what it ships with. But, either way, you have to wait for the message on the screen that it's reloading the image BEFORE you let go of the volume+ button.
Can Be Finicky....
coolrazas,
It also can be said that even in the best of times, the G-Tablet can be a
little finicky. One of my tablets the other day was a normal as could be.
I shut it down and the next day turned it back on. Continual "android.process.acore" errors. Had to fix it.
I say be conservative, be consistent in what you do, use only the "approved"
stuff, don't take advice you can't verify is good, and read, read, read, read!
Good luck to you. BTW, what I did was buy a second G-Tablet so I always have one up for use while working with the other!!!
Right now one is on OTA 3991 with plans to go back to 3588 when the new OTA comes out (if it does!). The other is
TwoTapX .9.0.2 and will stay there until VS lets us know the directions they are going -- and the roebeet will move ahead.
Hope this helps you. Enjoy!
Rev
I have decided to return this one and hope that the newone will not have an issue so I can move on with Clockmod and TNTlite. I will mail it today and hope I will get the new Gtablet from Amazon sometimes this week... Ah... Few more days. Thanks for everyone's input here. I will be getting back on this forum a lot more as I have to learn LOT more......
Is somebody get the same problems because of which it were necessary to return g-tablet?
Or having patience and endurance it is possible to solve any problem?
Getting my new Gtablet today
So finallly I am going to get my new replaced G-Tablet today . Just checked the UPS tracker and it says that it will be delivered this evening. Here are my plans now.... And please correct me if I am planning to do something wrong here.
After unpacking it,
1: Upgrade to the new Viewsonic firmware.... I believe it does it by default once you are connected to the wireless network.
2: Install Clockwork mod
3: Install TnT 2.4
Hopefully this will work this time. Any suggestions.....
use most recent
"3: Install TnT 2.4"
I would suggest using the most recent version of TnT. ie 4.4.0.
For this one you don't have to use use clockworkmod, but it will work ok with
clockworkmod.
If you're still unsure, you may want to try these steps:
www blendblog net/Default.aspx?tabid=36&EntryID=67
(can't post links, but a . where the space is...)
It helps that everything is layed out step by step.
Seems like the link that you provided talks about installing VEGAn. there is another embedded link in the post that talks about TnT4.4 installation as well. Considering the two platforms, which one would you guys prefer? By teh way, got my new Gtablet and ready to roll this evening with this process.
Hint: Look at the sticky force closing thread in this forum. Pay close attention to the original post.
I'm still puzzled why people aren't pointing new people to that thread.
goodintentions said:
Hint: Look at the sticky force closing thread in this forum. Pay close attention to the original post.
I'm still puzzled why people aren't pointing new people to that thread.
Click to expand...
Click to collapse
Well. He sent that tab back and now presumably has one without that issue.
coolrazas said:
Seems like the link that you provided talks about installing VEGAn. there is another embedded link in the post that talks about TnT4.4 installation as well. Considering the two platforms, which one would you guys prefer? By teh way, got my new Gtablet and ready to roll this evening with this process.
Click to expand...
Click to collapse
You are correct. The link does provide steps to install vegan. I meant it as an alternative to tnt.
For me and my tab, vegan with pershoots kernel is much more responsive than tnt alone.
If you google vegan tab you'll find gojim's website. There hasn't been any updates in a few days but it sounds like one will be forthcoming. Im waiting and watching for that one as well as waiting for an update on calkulins rom. It also sounds pretty snappy.
I bought a streak unlocked from Dell, had it a week or so, followed some pretty simple instructions for putting Streakdroid 1.9 on it. I have been pretty happy with it so far, but I have a lot of issues with intermittent WiFi and would like to see what the latest official build has to offer.
I downloaded the recovery tool from here, flashed the recovery for 351, but I'm a little unsure of the process and the results, so I haven't actually ran the recovery.
I am assuming that I need the update.pkg for 351 on my SD card, then just choose to recover to that right?
Would my streak then be locked at that point? Are there any pitfalls I need to be aware of?
I'm sorry if my questions have been answered before, I did my best to find the answers here on the XDA forums as well as the internet at large and apparently my Search-Fu is pretty weak.
Any help/advice offered would be appreciated greatly.
You have the factory reset procedure down pat, in that you put update.pkg on the root of the SD and flash from there. The only real pitfall comes in having to install all your apps again, which is why a nandroid backup is a godsend.
As to phone locks, look here. In short, phone unlocks are permanent.
Awesome, thank you for your reply. I hate asking questions when I KNOW the answer is out there to be found, but I honestly couldn't find this one.
OK, Heres the scenario, This is a replacement T-959 vibrant, sent from either TMO or Samsung, really not sure! My 1st phone never had any issues with modding, and always cooperated! Until I used KIES to update one day and It bricked, because of primary and SBL corruptions. [I know!!, found out 5 mins too late about using KIES] Anyway, since Ive had this replacement phone its done nothing but fight me from the start, never has acted right I think and I feel there's something wrong HW wise with it. My problem with it now, is it wont accept any other custom ROM I try to install, and only works with either 2.1 or 2.2 stock OEM ROM's. Meaning, Anything else ROM wise, It wont go past the last part of boot sequence, and just keeps looping, and does it over and over again! Ive tried all of Simple Honeys, Toxic 8's Roms, and each time it goes thru the loading successfully, and then starts it boot-up, but every single Flash Ive done, ROM wise, it hangs up and loops at the very last part of booting up. Ive come to realize now, it isn't the ROMS, but the phone " I THINK" Each time I tried a Custom ROM install, I started with stock fresh JFD install, and wiped and cleared out everything before starting another ROM install, but with each attempt that I try to go past anything other than Froyo stock, It does this boot loop problem at the final part!! It seems like who ever sent it to me, did something to the phone to prevent this. Modding it I mean. like right now I'm on Eugenes Froyo, with the 2E RECOVERY, It was working fine, until I upgraded the Eugenes kernel, which is suppose to work with this ROM, technically the phone still runs, but as soon as I did this, I now cant get into the two drives as mass storage to tranfer files, says insert disk, like as if its a CD Rom drive, WTF!! And like I said, this phone wont accept any other ROMS now, past stock Eclair or Froyo OEM and kernels as well. I don't understand what the problem is, My guess is they flashed something to prevent modding or its just a corrupted HW issue, anybody ever seen this before. I wish I had just JTAG'd my first phone with Josh over at Mobile Tech, and saved myself all this heartbreak and frustration, but its too late for that now! So anyway, I need to determine for sure if this phones screwed, HW wise or if there is SW to get this phone straighten out, to where it'll work right like my first one used to, and begin to accept custom ROM's like it should be able to do!! I'm at my last end with this phone, and I'm desperate to get a solid reason/answer for whats happening here, because Ive followed all the instructions and standard procedures to insure that all the attempted installs of the ROMS I mentioned go correctly. And its boiling down to either HW issues or a SW issue they created before they shipped it to me, or last but least hopefully a SW fix here, that can get the HW/phone to act right again, and maybe salvage this phone, otherwise I'm thinking I need to buy another brand new phone and hope for the best. I just don't want to be stuck and limited with Froyo stock, for the rest of my time using this phone, I want my freedom to choose again, like I had before, and also It ran so much better than OEM anyways!
Go back to stock using the sticky on the q&a then root using that same methOd and when you flash a custom room make sure you wipe dalvik and cache and delete user data
Sent from my SGH-T959 using XDA App
Quote" Go back to stock using the sticky on the q&a then root using that same methOd and when you flash a custom room make sure you wipe dalvik and cache and delete user data"
If you had picked up on it in my post, have already done this dozens of times!! Oh and BTW, when at JFD = 2.1 Eclair, it wont allow the 2 drives access to in Cabled USB mass storage, and therefore unable to CWM flash with zips, then I must go to 2.2 Froyo next to be able to get past that problem, but again when I go from there to any custom ROM, it fails to boot at the very end, and starts its looping. Again, the 1st phone I had, never ever, behaved like this!! Same phone but, different dates of manufacturing and also this one came from either Samsung or TMO in Plano,TX where that's all, they do is send out phones for replacement, and this one wasn't in a original box, something they worked on, grabbed off the shelf, and sent to me!! Its just a shame that 99% of all the ROMS are in zipped form, instead of TAR files, at least then I could've tried flashing some of them from, Eclair to see if that made a difference, but when they are zipped, you must use CWM recovery to flash, and thus again presents another problem as far as what I'm going thru here!
Got any thing else, Idea wise, that actually hasn't been tried yet, that makes sense??
OK, Ive made some progress, It seems for whatever stupid reason, that unlocking my phone, [jailbreaking] was the culprit of this phones renegade behavior, I simply restored it back to a locked status as a TMO provider, and Wholla, the phones now acting right!! And I have been able to get it to the ROM I wanted and flash a better kernel as well with 0 defects!!! And then I jailbroke it again, and its working flawlessly.
Personally I don't understand why that had a bearing on its behavior, but nun the less it did. And has cause me a few extra wrinkles around my eyes in stress trying to figure this out by myself, especially when all the suggestions and procedures I did was for nothing, until this phone was restored to a locked condition again!!
Go figure Right???? Grrrrrrrrrrrrr!!!! Anyway I hope mentioning this will prevent someone else in losing their hair or sanity!!
hello i think we have the problem, i also have openline my vibrant to be able to use here in our country.. i have 2.1 eclair, i just want to know what 2.2 ROM did you used coz you've said that it's ok to upgrade it to 2.2, but not other ROM, where did you get it.. can you pm me the link
thanks