First off, picked up 2 GTabs yesterday and thanks for all of the work everyone has done to make these tablets better. And my first question of probably many.
Our Battery level indicators have not gotten back up to 100%. Yesterday when I was flashing the roms they would get to 97%, and after charging over night they showed 96%. Didn't know if there was a way to calibrate the level there or not.
Thanks.
extremefire said:
First off, picked up 2 GTabs yesterday and thanks for all of the work everyone has done to make these tablets better. And my first question of probably many.
Our Battery level indicators have not gotten back up to 100%. Yesterday when I was flashing the roms they would get to 97%, and after charging over night they showed 96%. Didn't know if there was a way to calibrate the level there or not.
Thanks.
Click to expand...
Click to collapse
I'm not sure if this will work but, if you can get into recovery mode:
Press and Hold down "Volume Up" Button and then press Power Button until you see a messege on the upper left hand corner that says something like.
"Detect a recovery Key pressed"
From the recovery menu, select ADAVNCED, then WIPE BATTERY STATS.
I've never had an issue with the battery on my GTAB but maybe it will help.
Good luck
That's very helpful, thanks! I was havng the 96%/97% maximum charge issue as well.
Running TNTLite 4.2.3.
Going to go ahead and drain the tabs down today and let them charge to full overnight one last time. If they still give me trouble I'll try the battery stats wipe.
Thanks.
I have the same thing happen to me after I flashed.
It only charges to 97%
I tried wiping the battery stats but it still only charges to 96/97
running vegan 5.1.1
I'm having the same issue. Hmm
VEGAn 1.00 beta 5.1.1
Hi everyone.
Had this exact same issue.
was using ZEAM for my launcher,
once I switched to Launcher Pro, my battery level now shows 100% when the charge light is green.
Not quite sure how this is related to ZEAM, but I used ZEAM for my launcher on both TNT and VEGAn Tab and had the battery level issue - would never charge past 96 or 97%.
hope this helps!
running launcher pro and vegan...still nothing past 97%...have wiped battery stats etc..
Mine only shows 96-97%, but actual battery life is excellent.
Success! Sort of. I'm experiencing the same issue, but I've been able to get the battery to display 100% but charging it up to full, unplugging and using for a few minutes and then plugging the tablet back in. This trick doesn't work every time but I have been able to get to 100% a few times. This expirement was performed on Vegan tab and Pershoot's February 18th kernel.
Weird... Mine is doing this too (vegan rom). My battery life is excellent but I'm still obsessing over that last 3%... At least its good to know is not just me.
Has anyone found a fix yet? I'll probably try draining the battery and charging it; we'll see what happens.
adampdx said:
Success! Sort of. I'm experiencing the same issue, but I've been able to get the battery to display 100% but charging it up to full, unplugging and using for a few minutes and then plugging the tablet back in. This trick doesn't work every time but I have been able to get to 100% a few times. This expirement was performed on Vegan tab and Pershoot's February 18th kernel.
Click to expand...
Click to collapse
Corresponding values Volt-percent are hard coded in software (100% - 4.2V per cell).
Trying to top off your battery, charging circuit may malfunction and battery may be overcharged. Anything more then that and lipo (battery) will degrade chemistry very rapidly.
97% is about 4.15 - you are not losing much capacity, but your battery will hold much more cycles in a long term run.
Mine used to charge up to about 96%, now it never goes above 94%. I'll try wiping battery stats in CWM and see if that changes.
Related
Newbie here - I have a stock G Tablet.
Have added many apps and also Flash and it is working great.
My one concern is that however long I charge the unit,
I can't get the battery indicater to go above 93%.
Is anyone else experiencing this ?
hello there,
yes i am having the same problem. no matter how long, mine can't get past the 95% mark. clockwork mod + tnt 2.2
ideas on how to fix this, anyone?
regards
Try to recharge with the device powered off, and let it charge for at least half an hour after the light turns green.
I've left it plugged in a good 2 to 3 hours after the green light came on.
It still only reaches 93%.
Is it a bad battery, bad charger, etc.,
Any thoughts... anyone ?
BluesTele said:
I've left it plugged in a good 2 to 3 hours after the green light came on.
It still only reaches 93%.
Is it a bad battery, bad charger, etc.,
Any thoughts... anyone ?
Click to expand...
Click to collapse
Do a full cycle, all the way dead and then charge as stated for about 30 minutes after the green light comes on. It could be just a calibration problem. How long is the battery lasting for you?
I use it for short periods throughout a day, so it is difficult to gauge an accurate time.
A rough guess would be approximately 6+ hours.
I always thought it wasn't good to totally drain this type of battery ?
Battery Life
BluesTele said:
I use it for short periods throughout a day, so it is difficult to gauge an accurate time.
A rough guess would be approximately 6+ hours.
I always thought it wasn't good to totally drain this type of battery ?
Click to expand...
Click to collapse
I think this is a LiPo battery - if so, then its is OK to let it drain all the way - just don't do it too often. You should *always* do two full discharge/recharge cycles on any Lithium-based battery as soon as you purchase it, and again about every month or two.
For removable Lithium-based batteries (i.e. *not* for gtab!), if you aren't going to use the battery for, say, more than a week, the best thing to do is to discharge it to about 50% and then put it in the refrigerator. When you are going to start using it again, let it warm to room temperature for at least a few hours to a day (depending on how big it is), *then* put it on the charger. Absolutely do not charge the battery cold as the thermal shock could damage the battery.
The initial discharge/recharge cycles "primes the pump" so that you get the maximum capacity out of the battery (who knows how long the battery has been 'sitting on the shelf'), and the ongoing discharge/recharge cycles keeps the battery at its maximum capacity *and* allows the calibration electronics more accurately track the slow decline of the battery's capacity.
BTW, my gtab's battery lasted on-and-off for almost 2 1/2 days. That was 'sleeping' it at night (*not* turning it off!) and using it on-and-off wifi/surfing/playing AB during the day. I must say, the gtab's battery life is phenomenal!
andygee said:
Do a full cycle, all the way dead and then charge as stated for about 30 minutes after the green light comes on. It could be just a calibration problem. How long is the battery lasting for you?
Click to expand...
Click to collapse
Thanks. Tried the full discharge and then full charge with the gtab turned off, left for about an hour after the green indicator, but still stuck at 95%. Even deleted the batterystats.bin file. no change. must i do two cycles of full discharge and charge?
I'm having similar issues. I powered off my gtab overnight and let it charge for 8-9 hours and I have not been able to get the battery to say 100%. I'm going to leave it on all day and let it discharge completely and try again tonight.
Drained battery and left it charging overnight and while I was at work (15+ hours) and its still at 95%. I wonder if I should exchange it now.... I'll give it another week....
If you do two full discharge/recharge cycles and the battery is still not showing 100%, then I would take it back. Either it is the battery or the battery calibration electronics that isn't working (my bet would be the battery). Furthermore, since the battery is "not removable", its just not worth keeping it and taking the chance.
If the battery had been removable, then Viewsonic could have just sent you a new battery instead of having a whole gtab come back....
(Note for Viewsonic - this is where removable batteries are superior to non-removable!)
japhule said:
Drained battery and left it charging overnight and while I was at work (15+ hours) and its still at 95%. I wonder if I should exchange it now.... I'll give it another week....
Click to expand...
Click to collapse
Before you return it check the actual battery life. If it turns out that it's just a calibration issue and if your happy with everything else, perhaps you should keep it.
Read the thread about my battery test...
mine is different... I can charge up to 100%, and keep using it for few hours at night, put it to sleep, then I wake up in the morning and find the battery completely drained... any1 has the similar issues??
chukostar said:
mine is different... I can charge up to 100%, and keep using it for few hours at night, put it to sleep, then I wake up in the morning and find the battery completely drained... any1 has the similar issues??
Click to expand...
Click to collapse
You can try going to settings/applications/running services and turn off all non-essential services before putting it to sleep.
Mine doesn't get above 96%, will have to try the suggestions here but overall I'm still very happy with battery life of the 96%...
thanks, i'll definitely try that... but I don't think I have too much installed or services running since I flashed it with the new ROM.
have you guys notice your battery temperature? i got 2 gtab but both operating at different temperature 1 at 23-24 other is around 31?
My battery life seems pretty good even though it doesn't go higher than 95-96%. I saw in another thread to try resetting battery statistics in clockwork recovery to see if that will fix the battery display problems. I'm going to try that next.
I've got the Malata Zpad (SMB-1002-3G) and mine now wont go over 91% (happened on the 3rd day). It used to charge to 100% no problem for the first two days.
I did a recovery (format) when you press the power and volume up button, but that didn't seem to do anything (other than wipe all my settings and put it back to original factory settings of course)
I'm pretty sure the battery is fine, and lasts just as long, but it would be good to be able to reset the battery status.
PS: My Zpad is not rooted or anything. It's pretty much standard (just running Launcher Pro).
japhule said:
Drained battery and left it charging overnight and while I was at work (15+ hours) and its still at 95%. I wonder if I should exchange it now.... I'll give it another week....
Click to expand...
Click to collapse
Do you have Clockwork installed by chance? If you do you can charge the battery all the way up and then go into clockwork and reset the battery stats.
Might help...
No matter how long my g tablet is plugged in,
it does not charged until the battery meter says 100%.
It always get charged upto 96%.
Is there anyway to fix this problem?
Is it something that can be fixed by clearing batterystat.bin?
If that so, can I do that using adb? Thank you.
khunny,
This is pretty common with the G-Tablets.
You can run it down all the way and then go into CWM and tell it to reset the battery stats.
But often as not that doesn't change much.
My personal advice (I have one that often does the same) is just ignore it. If it's 96%
you've got no problem and at less than 10% you better be thinking "charge."
Rev
Mine only charges up to 96% as well. Gonna try to reset it in CWM after it drains. Hopefully it works, cuz while having it only go to 96% isn't a huge deal its something I would like t be able to fix.
search is your friend
It is normal. Gtab treats 8.3V as 96%. In theory, 2cell li-ion battery 100% of charge is 8.4V. But, such battery does not like to be overcharged (it will shortened battery life).
mine did charge to 100 percent before installing vegan 5.1 supplement? Now it charges to 98 no matter how long i leave it plugged in? There has to be some way to alter the battyer stats to show 100 percent if it is??
Mine finally got to 100%
I had this tablet only for a week or so. I have installed Vegan 5.1.1. I noticed the battery only charged to 95% or 96%. I have drain the battery all the way, and then "Reset Battery Status" in CWM. But, it did not work the 1st time. Then, I drained it again. After the tablet shuts off automatically, I would push the power button to turn it on a few times to drain it more. Then, I reset the battery status in CWM, AND, I "Fixed File Permissions" right after the battery status reset. Then, reboot the device, and it reached 100%
Note: I drained the battery at work, tried to turned it back on about 3 times after it shuts itself off. After I got home, a few hours later, I turned it back on one more time, and the battery showed 2% and stayed on for quite a while. Not sure why that is. Hope this helps.
Been using the g tab since December and have always been impressed by its battery life. Only issue was the battery meter never seems to reflect the true battery level. I had times when it just shut off without warning with the battery meter at 100% while other times, it drained rapidly to 0% within 20 minutes.
I know the general fix is to delete battery stats with recovery (which i have been doing frequently) but that still doesn't quite solve the problem. As such, i decided to test the exact battery life of the tablet. I am quite shocked at just how good it is o.0.
I've had a (1hr 17 mins) video looping with wifi on and connected for exactly 9 hours now as i am typing this. The battery meter still reads 100% but i think it will turn off/drain rapidly soon.
I am on TNT Lite 3.1.4 btw (old but gold).
Update: Tablet just shut off after 10h and 56 minutes on video loop + wifi. Video was stored on tablet memory.
Issue: Battery meter never drained and was 100% till death (i plugged in and rebooted and it read 100%). I had just wiped battery stats before doing this experimental run. Any suggestions to deal with the battery meter issue?
I had a similar problem with another tablet after wiping the battery stats and still don't know if that was the issue or not. From my recollection, you were supposed to discharge the tablet completely and then delete the battery stats (or was it charge it completely?). Is it possible you deleted it in the wrong state, so it thinks an empty battery is full? I always wonder if I might find a similar fix for the other tablet or if the charging hardware simply failed (not a gTablet -- a flytouch2 type device).
wd5gnr said:
I had a similar problem with another tablet after wiping the battery stats and still don't know if that was the issue or not. From my recollection, you were supposed to discharge the tablet completely and then delete the battery stats (or was it charge it completely?). Is it possible you deleted it in the wrong state, so it thinks an empty battery is full? I always wonder if I might find a similar fix for the other tablet or if the charging hardware simply failed (not a gTablet -- a flytouch2 type device).
Click to expand...
Click to collapse
From what I've read about calibrating the battery on other devices (specifically in the EVO forums), you're supposed to charge it until it's full, immediately wipe the battery stats, run it until it's dead without turning it off at any point, then charge it until it's full with the device off. Turn the device on and it should be properly calibrated. I'm not sure if this will fix your problem, but it's worth a try.
If that doesn't work, you could try flashing a different ROM and see if the problem persists (backup everything in clockworkmod first, so you don't lose anything if you want to go back to that ROM). If the problem goes away, it's probably an issue with TNT Lite 3.1.4. If the problem persists, it's probably an issue specific to your gTab.
Thanks guys. Ill give it a go.
Sent from my GTablet-TnT-Lite using Tapatalk
raphenucleus said:
From what I've read about calibrating the battery on other devices (specifically in the EVO forums), you're supposed to charge it until it's full, immediately wipe the battery stats, run it until it's dead without turning it off at any point, then charge it until it's full with the device off. Turn the device on and it should be properly calibrated. I'm not sure if this will fix your problem, but it's worth a try.
If that doesn't work, you could try flashing a different ROM and see if the problem persists (backup everything in clockworkmod first, so you don't lose anything if you want to go back to that ROM). If the problem goes away, it's probably an issue with TNT Lite 3.1.4. If the problem persists, it's probably an issue specific to your gTab.
Click to expand...
Click to collapse
I've been having an issue where my battery show that it is discharging but then it abruptly shuts down when it hits ~50%. No warning of low battery voltage.
I'll try this calibration and report back with results.
Update...8 months on.
My G tablet is now running Flashback 10.3 (finally HC is stable enough).
Battery still does not reflect drain, stuck at 100% every time. (i've been told its a kernel issue)
On Flashback 10.3: Looping a youtube video (1hr 14 mins) with HD on, sound off, wifi on, brightness set to automatic in a dark room. Tablet died after 9hrs 21mins.
This is 1.5 hours shorter than the result i obtained when i looped a internal storage video, wifi on, brightness automatic, sound off 8 months back on TNT 3.1.4 (froyo).
I'm pretty impressed given the 3700mAh in our device (compared to most 5000mAh tablets). Anyone done any tests? Do share.
I've got this problem with my tab (quick battery drainage). Symptoms would be your 100% charged tab would go down to 0% in unusual shorter time ( like 2-4 hours). You put it on charger and tab would be charged back to 100% again in substantial short time like 2-3 hours instead of 6-7 hours.
Well, after looking at this issue I think I have come up with solution.
At least, my tab looks like it's back on track... though, to say for sure I would need another couple days of testing.
The problem is not runaway wild application on a background but battery control circuit. This chip reports to OS much smaller battery capacity as it is for some reason. I will not go into details but here is what you need to try:
Flash stock kernel (may be custom kernel is not the reason for bad chip calibration and I'm 90% positive but just to be on safe side). You don't need to do factory wipe in OEM recovery for our purpose.
You also don't need to wipe batterystats.bin or use "Battery Calibration" apps from market (which does exactly the same wipe just in more end user friendly way). This wipe serves no other purpose then refreshing your usage statistics.
You also don't need to drain your battery all way down... nice, this way you don't have to wait for too long.
Well, here we go:
charge tab somewhere in between 80 and 100%.
edit: remove charger
shutdown tab (not put in hibernate/sleep) for 1 hour.
edit: turn tab on and run it for 30-40 min. or whatever it takes to drop charge to 40-50%.
shutdown tab again for 5 hours (overnight).
turn tab again and check... you should be fine now, charge it again 100% and use as usual.
That should do correct chip calibration.
PS: the reason why this chip calibration went bad at the first still remains open.
EDIT: just want to give a shortcut for those who does not feel like reading through the thread.
http://forum.xda-developers.com/showpost.php?p=16771651&postcount=41
Edit: here is calibration procedure which was modified down this thread ...
1. in CWM/recovery let it sit till battery in terminal will show less then 3700. The less you can get it the better. 3400 is probably absolute minimum.
2. shut down tab and let it sit for 1 hour.
3. plug it to charger and charge it for 5 hours.
4. disconnected charger and let it sit for 1 hour.
5. boot up your tab and test it, it your battery still not calibrated you can flash back your backup and repeat calibration procedure.
Edit: if you physically disconnect battery (you have to disassemble tablet) and keep it for couple min. that would trigger FG chip to start with default SOC curve.
Any follow up? Did this fix work for you since yesterday or anyone else?
yup, this is it...
This is how properly calibrate sg tab's batteries. There are some variations to the process but essentially battery will be calibrated in two measurements which stand apart by minimum 40% when battery is at rest on time intervals 1 and 5 hours.
No need to do factory reset, wipe batterystats, use battery calibrator apps from market or dance around with rain stick... all this will give same result as woodoo magic... though if by some reason battery calibration conditions are met then one may claim a miracle.
*sigh of relief* looks like this worked. More people that have this issue should now about this. Thank you for the fix.
Sent from my DROID2 using XDA App
Is this the same as the Sleep on Death (SOD) syndrome? that while charging it dies overnight and then you have to long press the power button and/or charge it to get it back?
Worked for me so far all good thanks
Sent from my GT-P7510 using XDA Premium App
Thanks will try this after flashing many custom roms I've been suffering from fast drainage which is not normal from when I had it on stock.
hyann said:
Is this the same as the Sleep on Death (SOD) syndrome? that while charging it dies overnight and then you have to long press the power button and/or charge it to get it back?
Click to expand...
Click to collapse
How long your tab usually works on one charge? if 8 and more hours - then no, I would think that there is a bug in Android charger control.
Vlad_z said:
yup, this is it...
This is how properly calibrate sg tab's batteries. There are some variations to the process but essentially battery will be calibrated in two measurements which stand apart by minimum 40% when battery is at rest on time intervals 1 and 5 hours.
No need to do factory reset, wipe batterystats, use battery calibrator apps from market or dance around with rain stick... all this will give same result as woodoo magic... though if by some reason battery calibration conditions are met then one may claim a miracle.
Click to expand...
Click to collapse
May I ask what do you mean by rest time intervals of 1 and 5 hours?
Does it mean that the calibration will only take place when the tab is off for 1 hour, then switch on and used till battery depleted by a further 40% minimum and the switch off for another 5 hour. Correct?
Also , is this 40% refer to value before or after calibration? I asked this because when I restart my tab the value changed (ex: 36% before restart to 53% after restart)
wlighter said:
May I ask what do you mean by rest time intervals of 1 and 5 hours?
Does it mean that the calibration will only take place when the tab is off for 1 hour, then switch on and used till battery depleted by a further 40% minimum and the switch off for another 5 hour. Correct?
Also , is this 40% refer to value before or after calibration? I asked this because when I restart my tab the value changed (ex: 36% before restart to 53% after restart)
Click to expand...
Click to collapse
Yes that's correct.
Fuel gauge chip will take 1 measurement of open circuit voltage and internal resistance only when battery is at rest (no charge/discharge) for at least 40min. - so I say 1 hour just to be sure...
Consecutive measurements, from which gauge chip can derive capacity of the battery have to be at least 40% and 5 hours apart.
Technically speaking, that 40% difference can be in either directions. Say you have 40% as of now, leave it in rest for 1 hour, then charge it to 100% and leave it at rest for 5 hours and you will have same result.
Condition "at rest" means voltage change less then 4mV (or mkV) per sec. - I don't remember.
When tablet is in sleep some background processes may awake tablet briefly and reset the 1 hour counter - so to make it work for sure, simply do shutdown.
if you want additional reading on my findings then look here:
http://forum.xda-developers.com/showpost.php?p=16615800&postcount=517
I tried this method...
1.Charged tab t0 80%, then shut down (removed charger) for 1 hour.
2.Turned on tab and played games for about 45min till battery was 49%.
3.Turned off tab and let sleep for 5 hours (charger still removed).
4.Turned tab back on and battery reads 79%, used for about 20min and battery reads 68%... Seems battery drain is still happening?
Right now i'm charging the tablet back upto 100% then perhaps try this method again... Did I do something wrong?
jzen said:
I tried this method...
1.Charged tab t0 80%, then shut down (removed charger) for 1 hour.
2.Turned on tab and played games for about 45min till battery was 49%.
3.Turned off tab and let sleep for 5 hours (charger still removed).
4.Turned tab back on and battery reads 79%, used for about 20min and battery reads 68%... Seems battery drain is still happening?
Right now i'm charging the tablet back upto 100% then perhaps try this method again... Did I do something wrong?
Click to expand...
Click to collapse
same problem im facing. This is why im wondering is the 40% value of before or after calibration. Because although it might drop 40% before calibration is done, the real drop value might be less then that. Which means to the chip it might just see a drop of example 20% of real drop and hence it didn't perform the calibration because conditions of 40% is nt met.
I did forget to flash back to the stock kernel (using pershoot's).
I just flashed to doc's slim 6.5 which has a modified stock kernel (couldnt find just the stock kernel and my internet is too slow to download the entire stock rom.). Going to try this method again but starting at 40%
1.Battery at 40%, shutdown tablet for 1 hour.
2.Charge tablet to 100% (while shutdown)
3.Leave tablet shutdown for 5 hours
4.Pray to droid gods, find my rain stick and begin dark resurrection ritual while watching true blood.
My only question now is... Should I turn the tablet back on after the 1 hour shutdown? Or should I leave it shutdown and just plug in charger till its 100% charged, then let it stay shutdown for 5 hours?
This is what worked for me:
1. Charged tab to 100% removed from charger.
2. Power down for 1 hour.
3. Power on (tab at 96%)
4. Drain to 46%
5. Power off for 5 hours
When I powered the tab back on after the 5 hours, i used it for a while and rebooted and the battery reading stayed the same which it wasn't doing before the calibration. It has been draining and charging at a normal pace since then and has remained the same after reboots and ROM flashes since the calibration.
FillTheVoid said:
This is what worked for me:
1. Charged tab to 100% removed from charger.
2. Power down for 1 hour.
3. Power on (tab at 96%)
4. Drain to 46%
5. Power off for 5 hours
When I powered the tab back on after the 5 hours, i used it for a while and rebooted and the battery reading stayed the same which it wasn't doing before the calibration. It has been draining and charging at a normal pace since then and has remained the same after reboots and ROM flashes since the calibration.
Click to expand...
Click to collapse
I'm going to go ahead and try this method right now! But for me... sometimes my battery will not charge unless the unit is shutdown (ever since battery issues started.). I hope this time it will charge while its on.
Also the instructions say to flash the stock kernel before trying this method... Did you do this? And were you able to flash back to pershoot's without issue?
*Update:
It doesn't look like its charging, (system on). Should I just shutdown and charge it to 100%? Then continue with said method? Anyone know if this method will work while tablet is shutdown through the entire process?
jzen said:
I'm going to go ahead and try this method right now! But for me... sometimes my battery will not charge unless the unit is shutdown (ever since battery issues started.). I hope this time it will charge while its on.
Also the instructions say to flash the stock kernel before trying this method... Did you do this? And were you able to flash back to pershoot's without issue?
Click to expand...
Click to collapse
My tab was charging while on, sometimes it wouldn't show it till after a reboot. I did mine from stock 3.1. (A backup I made before I took the TW OTA) I have not re-flashed pershoot's kernel and probably wont till the bug is worked out. I did however flash the deodexed stock TW and flashed a theme and have had no issues.
Edit: if its not chargin while on, i would charge it all the way while off then turn it on so it can read the battery then start the 1 hour power down.
Correction guys...
I was sure that our p7510 model was using TI bq20z75 fuel gauge chip but with new information looks like it's Maxim 17042 chip... It's embarrassing but I have to stay corrected. TI chip would calibrate itself in procedure outlined above as for Maxim - I don't know yet. I'm looking at it.
These are good and bad news. Good one - with this new fact, it's very possible that the reason of chip's SOC counter corruption is in software. Driver for Maxim is pretty messy and complex (because it's messy). In contrast driver for TI is simple and straight forward (because TI chip is smart). Software can be fixed but problem in hardware design not so easy.
Well, I will report back when I find something.
So, will FillTheVoid 's method work with my GT-p7510? :x
Vlad_z said:
Correction guys...
I was sure that our p7510 model was using TI bq20z75 fuel gauge chip but with new information looks like it's Maxim 17042 chip... It's embarrassing but I have to stay corrected. TI chip would calibrate itself in procedure outlined above as for Maxim - I don't know yet. I'm looking at it.
These are good and bad news. Good one - with this new fact, it's very possible that the reason of chip's SOC counter corruption is in software. Driver for Maxim is pretty messy and complex (because it's messy). In contrast driver for TI is simple and straight forward (because TI chip is smart). Software can be fixed but problem in hardware design not so easy.
Well, I will report back when I find something.
Click to expand...
Click to collapse
A lot of this is way over my head, but my battery calibration seems to be accurate, although I can't be absolutely sure because I have no stats from the previous calibration to compare it to. I do know for sure that after this process the bug of it draining then after reboot going back to what it should be is gone.
so i guess we need to flash back the stock ROM w/o TW for this procedure to work? I was trying the same steps with StarBurst + pershoot kernel it seem that it doesn't work. Anyone manage to calibrate with pershoot kernel?
For the past few days my battery has been charging to a max of 92%, whether or not I try unplugging the battery, leaving the phone on the charger, wiping battery stats, and doing all that I can to try to reset the battery stats.
Anyone have any idea?
UPDATE: My phone is still not charging past 92%, no matter how long I leave it on, or what I try to do to fix it. 4167mv max
I have a similar issue, it's been like that for a long time for me. What ROM/kernel are you running? It might fix it to completely drain it, charge it powered off, reinstall ROM/kernels when it is completely charged and reset battery.
Sent from my MB860 using xda premium
drain it until it shuts off and then charge it all the way to 100%.
I too was having this issue after going from cm7 week 5, to week 8. I did what others were recommending and charged to what showed 4200mv, pulled the battery while still plugged in, put battery back in then after it showed 5%, turned it back on and Viola, 100% battery. Try it.
its most effective if you know your battery is fully charged, power it down, pull the battery, while the battery is pulled plug it into the power adapter, it will act like its starting to charge, but then instead of having a percentage, it will have a question mark. pull the power, put the battery back in, turn on, wipe battery stats in recovery and run with it...
GL
johng75 said:
its most effective if you know your battery is fully charged, power it down, pull the battery, while the battery is pulled plug it into the power adapter, it will act like its starting to charge, but then instead of having a percentage, it will have a question mark. pull the power, put the battery back in, turn on, wipe battery stats in recovery and run with it...
GL
Click to expand...
Click to collapse
I just started having this issue and cant wait to try it thanks for the suggestions.
when this happend on mine all i did was keep using it and it fixed itself. i ran it down maybe to 20% before I got to charge it again and it slowly creeped back up to 100%. took about a week.
I've had the problem, and have run the solution more times that I can count. But nothing ever fixes it permanently. Everytime I run the battery low, the levels get all screwy again. Maybe my phone is just worse than everyone else's, but I had to just give up on it. Would love a permanent solution, but so long as I'm running this ROM (CM7), I doubt I'll ever find one.
lurchbyrep said:
I've had the problem, and have run the solution more times that I can count. But nothing ever fixes it permanently. Everytime I run the battery low, the levels get all screwy again. Maybe my phone is just worse than everyone else's, but I had to just give up on it. Would love a permanent solution, but so long as I'm running this ROM (CM7), I doubt I'll ever find one.
Click to expand...
Click to collapse
I'm in the same situation as you are... I had this problem for a long time now (Guess it has something to do with excessive flashing...) and no matter what kind of solution I do (Wipe battery stats via recovery, re-calibrate the battery, pull the battery out while charging and replugging it) it returns after a day or two.
I want to check if it has something to do with the battery or the device, and if I will remember to do so, I will plug my spare battery for several day's run, but that is subjected to me leaving the comfort of my usual laziness....
Would love if there was a permanent solution as well, thou I doubt that too....
I've had the same problem on a number of different roms and at different times. I find that instead of mucking around wiping stats etc, it has always come good eventually for me.
timfoote said:
I've had the same problem on a number of different roms and at different times. I find that instead of mucking around wiping stats etc, it has always come good eventually for me.
Click to expand...
Click to collapse
Didn't really understand what you meant, did the battery percentage fixed by itself and gave you 100% at full charge on one day? out of the blue?
Or did you just got used to have less then 100% battery display?
Magnetox said:
For the past few days my battery has been charging to a max of 92%, whether or not I try unplugging the battery, leaving the phone on the charger, wiping battery stats, and doing all that I can to try to reset the battery stats.
Anyone have any idea?
Click to expand...
Click to collapse
First let the battery completely drain and the phone shut down by it self. Second step is to pull out the battery and leave it out for 10min, after that take a plastic bag and put the battery in it and place it in the freezer for 15min. after this palce the battery again in the mobile. make sure there is no any moisture on the battery. Then charge the phone without power on till 100%.
By following these steps this will made your battery to charge fully and more talk time
masood8 said:
First let the battery completely drain and the phone shut down by it self. Second step is to pull out the battery and leave it out for 10min, after that take a plastic bag and put the battery in it and place it in the freezer for 15min. after this palce the battery again in the mobile. make sure there is no any moisture on the battery. Then charge the phone without power on till 100%.
By following these steps this will made your battery to charge fully and more talk time
Click to expand...
Click to collapse
Um correct me if I'm wrong anyone, but doesn't cold kill the battery and shorten its life? I remember my mom always putting new batteries in the fridge and them only lasting a couple days compared to the ones left out that lasted a month or so with same use.
masood8 said:
First let the battery completely drain and the phone shut down by it self. Second step is to pull out the battery and leave it out for 10min, after that take a plastic bag and put the battery in it and place it in the freezer for 15min. after this palce the battery again in the mobile. make sure there is no any moisture on the battery. Then charge the phone without power on till 100%.
By following these steps this will made your battery to charge fully and more talk time
Click to expand...
Click to collapse
Haha, I got a good laugh out of this one -- you've got to be joking.
I've had this problem for a quite a while now with the Atrix and two different batteries. I've tried dozens of combination of resetting the battery stats, running the battery completely down, and powering up without the battery and hot swapping it in. The hot swap definitely allows me to finally recharge to 100%, but once I run it down again, the problem returns. I've learned to just live with the less than 100% reading -- battery still seems to last a full 24 hours for me.
masood8 said:
First let the battery completely drain and the phone shut down by it self. Second step is to pull out the battery and leave it out for 10min, after that take a plastic bag and put the battery in it and place it in the freezer for 15min. after this palce the battery again in the mobile. make sure there is no any moisture on the battery. Then charge the phone without power on till 100%.
By following these steps this will made your battery to charge fully and more talk time
Click to expand...
Click to collapse
That trick hasn't worked since nicad batteries in the 90s, and is a really bad idea with our Li-PO.
Drain the battery till the phone shuts off, charge back up while the phone is off.
If it still doesn't get to 100%, boot into CWM, wipe battery stats and power off the phone to let it charge again.
^^ I know it works because I've done this like 2 days ago, and many times before that.
I have had this issue as well for a very long time. I've tried the pull out, question mark, 5% thing and it usually only works for one cycle, then the next only goes to 97%, then the next to 93%, then 90%, and it continually goes down until I have to do it again. Hopefully a permanent fix can be found soon. I've tried clearing battery stats, draining it to 0%, then charging it fully. I've tried everything. As far as I'm concerned, there's no fix as of right now.
Thanks man this worked like charm of 100 witches and 100 warlocks having orgy and satin worship
pre4speed said:
I too was having this issue after going from cm7 week 5, to week 8. I did what others were recommending and charged to what showed 4200mv, pulled the battery while still plugged in, put battery back in then after it showed 5%, turned it back on and Viola, 100% battery. Try it.
Click to expand...
Click to collapse
dyno0919 said:
I have had this issue as well for a very long time. I've tried the pull out, question mark, 5% thing and it usually only works for one cycle, then the next only goes to 97%, then the next to 93%, then 90%, and it continually goes down until I have to do it again. Hopefully a permanent fix can be found soon. I've tried clearing battery stats, draining it to 0%, then charging it fully. I've tried everything. As far as I'm concerned, there's no fix as of right now.
Click to expand...
Click to collapse
★ATTENTION! I FOUND THE FIX!★
Turn phone off and plug it in to a wall charger. Charge it until your notification light turns green, quickly tap the power button to check battery level. (Usually shows 90%) If the notification light turns on, but the battery indicator is not at 100%, unplug phone, take out battery and put it back in. Now plug your phone. It should be 100% now. For the final fix: go into "Android Recovery" and select "Mounts". Mount Your SD card and Emmc. Finally wipe battery stats. Reboot phone.
This method worked for me. I am 100% sure this is the fix for this problem. This has to be done every time you flash a new rom or when your phone freezes and you screw up calibration by pulling the battery while it is still on. BTW, this is my first post so don't be mean to me!
Sent from my MB860 CM7 20FEB 1.0 GHz Enhanced
xateeq said:
Thanks man this worked like charm of 100 witches and 100 warlocks having orgy and satin worship
Click to expand...
Click to collapse
Satin worship, is that like old fashioned polyester worship?