Xrecovery does not start on 2.1.1.A.0.6 - Sony Ericsson XPERIA X10 Mini

Hello,
I do not have enough messages to start discussion in http://forum.xda-developers.com/showthread.php?t=859571, so, I am doing it here.
After updating my x10 mini to 2.1.1.A.0.6 (with full wipe) and reinstallation of xrecovery it stopped working. It just does not appear if I press back button several times during start.
I tried both .apk and manual method, checked permissions, changed it to 777, but xrecovery still does not appear.
Is something wrong with bootloader in this version, or is there any other reason? How to handle the issue?
Thank you in advance, having xrecovery is crucial for me.

Xrecovery works fine on 2.1.1.A.0.6. (I am using it right now to backup my 2.1.1.A.0.6 system)
double check your busybox install and make sure you are using the old xrecovery 0.1 for mini (the new versions of Xrecovery don't support mini or pro)
Kiwi

Could you please attach busybox, changemon and xrecovery.tar in the post?

illi4 said:
Hello,
I do not have enough messages to start discussion in http://forum.xda-developers.com/showthread.php?t=859571, so, I am doing it here.
After updating my x10 mini to 2.1.1.A.0.6 (with full wipe) and reinstallation of xrecovery it stopped working. It just does not appear if I press back button several times during start.
I tried both .apk and manual method, checked permissions, changed it to 777, but xrecovery still does not appear.
Is something wrong with bootloader in this version, or is there any other reason? How to handle the issue?
Thank you in advance, having xrecovery is crucial for me.
Click to expand...
Click to collapse
Do you have the right busybox version? I think its this one http://db.tt/pkNQiaV
Put it in /system/bin folder
Sent from my U20i using XDA App

HerrKuk said:
Do you have the right busybox version? I think its this one
Put it in /system/bin folder
Click to expand...
Click to collapse
Did it!
Thank you

Yeah, it was the same here. xrecovery 0.3 doesn't work on e10i with 2.1.1.A.0.6.
Installed xrecovery 0.1 again and it works well.
Thx for this thread!

With the xrecovery.tar and chargemon from this thread: http://forum.xda-developers.com/showthread.php?t=878426 and the busybox from http://db.tt/pkNQiaV I'm now currently running xRecovery on 2.1.1.A.0.6. Perfect!

Thank you man! This worked like a charm on my x10 mini FW:2.1.1.A.0.6!

yeah ok so i downloarded the xrecorery 0.1 and unzipped it on my pc and got this
(folder) etc
(folder) res
(folder) sbin
(folder) temp
busybox
chargemon
default.prop
init
init.rc
and a recovery rar
but no apk??????
plzzzz help me i am getting really crazy now

freebordjunky said:
yeah ok so i downloarded the xrecorery 0.1 and unzipped it on my pc and got this
(folder) etc
(folder) res
(folder) sbin
(folder) temp
busybox
chargemon
default.prop
init
init.rc
and a recovery rar
but no apk??????
plzzzz help me i am getting really crazy now
Click to expand...
Click to collapse
this might help
http://forum.xda-developers.com/showthread.php?t=878426
plus, you only need the modified chargemon, busybox and xrecover.tar, and have them moved to /system/bin
if it doesnt work, i think you need to edit chargemon. look into the original thread for further instructions.

Now Working
Got this apk here and now it´s working.
xrecovery on x10mini pro 2.1.1.A.0.6
http://forum.xda-developers.com/showthread.php?p=13791318
it was driving me crazy.

Related

xRecovery works on X8!

For now we can create backups , fix permissions and the rest
Here it is ..
http://forum.xda-developers.com/showthread.php?t=878426
Yup I can confirm it works too
Tried backup and install update.zip from sd card no problem both went smoothly..
Sent from my X8 Rooted+JiT+App2sd+Recovery :*)
muzik_demon said:
Yup I can confirm it works too
Tried backup and install update.zip from sd card no problem both went smoothly..
Sent from my X8 Rooted+JiT+App2sd+Recovery :*)
Click to expand...
Click to collapse
how to make update.zip? simply put it the content there and zip? no signing?
No idea how to make it but we can install it
google it
Sent from my X8 Rooted+JiT+App2sd
You can use android kitchen to cook custom roms
Sent from my E15i using XDA App
Can someone provide the modified vendor files for kitchen to cook X8 roms ?
If you have a friend who cooked roms before for hero/legend/g1/nexus devices, ask him to cook one for us, this is the fastest way
For those who never cooked a rom, this link might be a start :
http://source.android.com/porting/build_system.html
Cooked rom should use our original 2.6.29 kernel of eclair and our rild libs, rest of system should be prelinked to those files.
Gingerbread (2.3) is available in AOSP repository, there's a very good chance we could have it running before SE release froyo if ever.
I have tried this rom Prime from LG Optimus P500 (same cpu and screen).
Flashed with xRecovery, than before rebooting copied over xRecovery files back to flash (to be able to return to my backup).
To enable "adb logcat" debug, put adb-enable file in /data/property/ directory.
The rom booted, i saw android 2.2 bootscreen, but than it crashed..
racht said:
Can someone provide the modified vendor files for kitchen to cook X8 roms ?
If you have a friend who cooked roms before for hero/legend/g1/nexus devices, ask him to cook one for us, this is the fastest way
For those who never cooked a rom, this link might be a start :
http://source.android.com/porting/build_system.html
Cooked rom should use our original 2.6.29 kernel of eclair and our rild libs, rest of system should be prelinked to those files.
Gingerbread (2.3) is available in AOSP repository, there's a very good chance we could have it running before SE release froyo if ever.
I have tried this rom Prime from LG Optimus P500 (same cpu and screen).
Flashed with xRecovery, than before rebooting copied over xRecovery files back to flash (to be able to return to my backup).
To enable "adb logcat" debug, put adb-enable file in /data/property/ directory.
The rom booted, i saw android 2.2 bootscreen, but than it crashed..
Click to expand...
Click to collapse
porting the rom to X8 should be easy. i read it somewhere at the cooking section
will try later.
Don't speak easy speak results.
propc said:
porting the rom to X8 should be easy. i read it somewhere at the cooking section
will try later.
Click to expand...
Click to collapse
Hi Propc,
"porting the rom to X8 should be easy",
Make it working is not that easy, what's the use of porting it then......
Just a post because i read a lot that everything is so easy...
Complicated thing 's are NOT easy.
Succes
Dink69
when it's easy, lets see results...
dink69 said:
Hi Propc,
"porting the rom to X8 should be easy",
Make it working is not that easy, what's the use of porting it then......
Just a post because i read a lot that everything is so easy...
Complicated thing 's are NOT easy.
Succes
Dink69
when it's easy, lets see results...
Click to expand...
Click to collapse
no, what i mean is porting the rom from other devices. i said i read it. not me said it.
you can search it if you want to know better.
sorry.
edit found it: http://forum.xda-developers.com/showthread.php?t=551711
Does not work on mine x8 2.1 rooted, the files are in the /system/bin my skips the xrecovery when i press the back button.
Sent from my E15i using XDA App
Edinhox said:
Does not work on mine x8 2.1 rooted, the files are in the /system/bin my skips the xrecovery when i press the back button.
Click to expand...
Click to collapse
maybe u didn't install busybox from market?
whre to get x8 update.zip or is it same for all phones??? lol
WARR10r said:
maybe u didn't install busybox from market?
Click to expand...
Click to collapse
i have the busybox installed from market place
i have moved/copied the busybox chargemon and xrecovery to /system/bin
the files are there but it skipps the thing at the SE logo. i have tested with holding the back button and pushing the button a couple of times.
You have to set up permissions to 777 (rwxrwxrwx)
peetr_ said:
You have to set up permissions to 777 (rwxrwxrwx)
Click to expand...
Click to collapse
Only if copied via a cmd prompt, if you use root explorer the permissions don't need to be changed
no, it's do not work for me too. i pressing more time for go in xrecovery, but it's not starting. my phone is starting normally
dviktor said:
no, it's do not work for me too. i pressing more time for go in xrecovery, but it's not starting. my phone is starting normally
Click to expand...
Click to collapse
do not install BUSYBOX from market
Use the busybox provided in the zip file
Suhel28 said:
do not install BUSYBOX from market
Use the busybox provided in the zip file
Click to expand...
Click to collapse
yeah, i made it, and all is work great. must all 3 files put in /system/bin/. even if you are got a busybox installed.
suhel28 said:
do not install BUSYBOX from market
Use the busybox provided in the zip file
Click to expand...
Click to collapse
Thanks it worked but i installed busybox from market and then after that i installed the apk file for X10 the big diden't work then a replaced the files with the ones for X8/X10mini and now it works
For those who can't have it work try like this
1. Download and install busybox from marketplace
2. install this apk file http://www.mediafire.com/?prj83693lv94lut its the xrecovery for X10 big but install it anyway
3. download the real files for xrecovery in the first page http://www.mediafire.com/?lz6gwgohuakvbfo
4. move extract the files you downloaded to your sdcard
5. Use Root explorer to copy/move the busybox, chargemon ant the xrecovery.tar to system/bin after you done that it should work

X recovery on x10 mini pro

It's my first post and the system tells me to post here!
So i have x10 mini pro update to android 2.1 with SEUS, i rooted with superoneclick, now i want to install Xrecovery...i have the three files:
Xrecovery.tar
chargemon
busybox
I know that i have to copy them to system bin and then reboot, correct?
My questions...
1) I have AndExplorer and I can't change dir attributes..do i need root explorer in order to do this or there's a way also on andExplorer?
2)I have titaniun back up installed and so busybox but it's in the folder \system\xbin not \system\bin, so i have to copy the three files in bin or xbin??
Thanks a lot!!
titanium backup will work. it is xRecovery that will not work with another busybox. check the threads at the x10 mini section. if you can not access xrecovery, try getting the chargemon from the other thread, or if you know how, change event1 to event0 (which i dont know how).
I'm not on a Pro (just a mini) but I have found there are a few Windows apps and scripts to simply install busybox, root, Jit, Xrecovery etc on the mini and pro (single click operation) there is even an .apk for the mini to install Xrecovery..
If you search the threads you will find them.. shouldn't be any reason anyone has trouble with these simple mods.. with all the DEV work gone into making scripts and apps, even my girlfriend could manage it (if she had any interest in modding her Mini)
if you still want to do it the hard way (I guess thats the best way to learn).. Busy box is an important thing to get right, if you have installed it... look in your app drawer and find your installed "busybox" then open the app and click on Install (I don't know why you install it then have to 'install' it within the program but you do) or is it just me?
the 3 files should be in System\bin but you also need to change the permissions before you reboot.... more forum searching required if you want to find out how to do that without Root Explorer... the search feature is your friend and the best way to learn.. good luck.
hope that helps..
Kiwi
http://forum.xda-developers.com/showpost.php?p=11234546&postcount=4
i installed root via superoneclock and installed xrecovery via flashtool, but didn't work well, than i installed xrecovery mini and it works great.
i am using an x10mini pro
stipey75
i had some of your problems too
1) Titanium use its own version of busybox. You can use an app called 'root checker' to see if busybox is installed properly
I had to install it, heres's link
http://forum.xda-developers.com/showthread.php?t=946259
2) To change permissions i used a free version of root explorer
http://www.mobiles24.com/downloads/s/410555-294-root_explorer
X10 mini Pro Xrecovery
Hello im trying to get Xrecovery to work on my xperia x10 mini pro but i cant install it, i ahve put the 3 files in the right folder and restarted my phone several times pressing the "back" button but nothing happens,
anyone know how to fix it plz.
Hecoro said:
Hello im trying to get Xrecovery to work on my xperia x10 mini pro but i cant install it, i ahve put the 3 files in the right folder and restarted my phone several times pressing the "back" button but nothing happens,
anyone know how to fix it plz.
Click to expand...
Click to collapse
First, make sure you don't copy but MOVE. Copy won't work.
Second http://forum.xda-developers.com/showthread.php?t=913136
In this page there's a link an automatic installation of root and xrecovery, why don't you try that?
Had similar issues on my x10i flashtool wouldnt set up xrecovery correctly, so downloaded app from market, installed, then clicked install again, but the three checks stayed crossed. Rebooted phone, and then the checks got ticked second time round. Now running freex10 2.2 beta 4 from z. Ita amazing.
Sent from my X10i using XDA App
i have the same problem !! nothing happen im having an x10 mini pro
ook step by step
first you flash your phone new with seus or etc.
then root with for example super one click
now download supermanager for free from the market and intall it
copy the three files to sd
open supermanger chose settings mark: root
go back to the first menu
select file manager
wait for superuser to give rigths to filemanager
copy the three files to /system/ bin
the file manager ask you wich modus do you want: you chose R/W
after that you reboot your phone
when the white "sony ericssion" appear press the back button
then xrecovery start
I have installed xrecovery on my mini pro and have copied those 3 files into system/bin not copied moved actualy and my phone is rooted via z4root and I still cant get xrecovery to work wen I reboot my phone and press the back button. Please help need advice
Sent from my U20i using XDA App
mibuwolf said:
I have installed xrecovery on my mini pro and have copied those 3 files into system/bin not copied moved actualy and my phone is rooted via z4root and I still cant get xrecovery to work wen I reboot my phone and press the back button. Please help need advice
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Check my psted turorial here in the mini general. Or you can click my sig about killed my phone.
Sent from my U20i using XDA Premium App
Thanx for the info but I did everything as described moved those 3 files into system/bin even got an updated busybox from the link in your tutorial and still I get nothing :-( what i'm I doing wrong please please help me I would be greatfull.
Sent from my U20i using XDA App
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied ! (this means sellect all)
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
i copied from here http://forum.xda-developers.com/showthread.php?t=950324
and it works
Thanx so much it works great just one more thing, what is Jit what does it do and how do I install it?
Sent from my U20i using XDA App
mibuwolf said:
Thanx so much it works great just one more thing, what is Jit what does it do and how do I install it?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
just install custom rom like.. miniCMpro froyo, it has JIT on/off setting and others.
Where can I find the custom rom?
Sent from my U20i using XDA App
Hey guys,
The easiest way to install root and xrecovery is to download the newest version of flashtool. The newest versions have xrecovery and root for all version of xperia family (x10, x10mini, x10minipro, x8). They should not have any problems rooting or installing xrecovery. I would reinstall the laster fw via SEUS before using it tho.
Cheers,
evilbarcode.
Can anyone provide me with a link where I can download minicmpro? Plz
Sent from my U20i using XDA App
mibuwolf said:
Can anyone provide me with a link where I can download minicmpro? Plz
Sent from my U20i using XDA App
Click to expand...
Click to collapse
here you got two great costum roms for x10mini pro.
CM7 Gingerbread http://forum.xda-developers.com/showthread.php?t=1041099
CM6 Froyo http://forum.xda-developers.com/showthread.php?t=961783
im using CM6 Froyo final. and for now is stable

[TUT]Root + Xrecovery + JIT for X10 Mini Pro with firmware v2.1.1.A.0.6 !

Hey guys,
The good news i wanna notice for everybody here is my X10 Mini Pro with lastest firmware 2.1.1.A.0.6 can Root + xRecovery + JIT and use Link2SD okay without any errors !
I will tutorial you to do that. Now lets begin !
Root : Automate Installation
1. Download attached file "SuperOneClick".
2. Enable "USB Debug".
3. Connect phone to "PC" and select "Charge Phone".
4. Open "SuperOneClick" and select "Root".
5. Wait!
6. When it is done, reboot.
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied !
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
JIT : Here is manual installation. Automatic Installer here : http://forum.xda-developers.com/showthread.php?t=951274
I'm strongly recommend to backup with xRecovery before install JIT !
- Download attached file !
- Go to market place and find app "Terminal Emulator" download and install it.
- Extract and copy to sdcard
- Use root explorer to remount /system rw
- Copy dalvikvm,dexopt,logcat in sdcard to /system/bin/
- CHMOD 755 for 3 files copied!
- Copy libdvm.so,libnativehelper.so,libcutils.so,libdl.so,liblog.so,libm.so,libz.so in sdcard to /system/lib/
- CHMOD 644 for 7 files copied!
- Copy build.prop in sdcard to /system/ (You can use your build.prob file. Please see Warning section below)
- Chmod 666 for build.prop !
- Go to /data/dalvik-cache/ and remove all file in it or use command rm -r /data/dalvik-cache/* or we can use xRecovery and choose Advanced Options > Wipe dalvik cached
- Reboot your phone and enjoy !
- To check it work or not run Terminal Emulator and type dalvikvm -k if you see "Configured with: debugger profiler jit show_exception=1. It's mean JIT has been working !
Warning : if your phone cannot reboot again please use xRecovery to restore backup file (if not backup yet you can use SEUS to reflash your device) and JIT again with your build.prop file.
Follow these instructions:
- At the step copy build.prob above please use your build.prob instead my file provided and edit your file :
- Edit /system/build.prob with Root Explorer
+Find :
DEVICE_PROVISIONED=1
Click to expand...
Click to collapse
and replace with
#DEVICE_PROVISIONED=1
Click to expand...
Click to collapse
+Find :
dalvik.vm.heapsize=24m
Click to expand...
Click to collapse
and replace with
dalvik.vm.heapsize=30m
Click to expand...
Click to collapse
+Find :
kernel.log=default
Click to expand...
Click to collapse
and replace with
#kernel.log=default
Click to expand...
Click to collapse
+Find
debug.sf.hw=1
Click to expand...
Click to collapse
if don't have add one
+Add
dalvik.vm.execution-mode=int:jit
Click to expand...
Click to collapse
at the end of file !
- Save file and do continue others step to complete JIT.
Thanks to zdzihu for xRecovery, shivenjuneja for SuperOneClick modified version and all member in XDA for JIT installation method !
Now important action ^_^. Please thanks me if you want cheer !!
Can anyone confirm that the jit part is working?
i just instaled every thing x recovery works but when i installed jit the phone frezes at se logo and will not boot. Waited 15 mins and nothing good thing i did a back up
Sweet,another repair added to my records :/
Miniwolfi said:
i just instaled every thing x recovery works but when i installed jit the phone frezes at se logo and will not boot. Waited 15 mins and nothing good thing i did a back up
Click to expand...
Click to collapse
Do you wipe all dalvik caches ?? and the first boot after install it's take about 5 minutes to rebuild all cache files. After that it's working perfectly. Try to reboot few times and plug off your battery first !
no need to use the modified superoneclick.
the original version 1.6.5 just fine in this firmware
http://forum.xda-developers.com/showthread.php?t=803682
juan77_sonic said:
no need to use the modified superoneclick.
the original version 1.6.5 just fine in this firmware
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Dude i used this version 1.6.5 but it cannot root for newest firmware for me ! It's notice me that device rooted but it's not you can check device root or not with Root checker in the market , it's also check busybox install !
i tried the method exactly like u write
stuck at SE white logo and it's rebooting again n again (10 minutes)
ntonzrockz said:
i tried the method exactly like u write
stuck at SE white logo and it's rebooting again n again (10 minutes)
Click to expand...
Click to collapse
I have been wrote new warning section for who have problems same you. Please read and do again to fix it. I hope you can because i can
quangnhut123 said:
I have been wrote new warning section for who have problems same you. Please read and do again to fix it. I hope you can because i can
Click to expand...
Click to collapse
okay i'll try it, maybe tomorrow...
it's late night now
thanks anyway
I was updated my TUT for more details !
For those needing JIT in the version 2.1.1.A.0.6.
donetus has updated deano309 xrecovery based installer. All you need to do is copy the files to the SD card and update using xrecovery.
http://forum.xda-developers.com/showthread.php?p=11289748#post11289748
Works well.
safrajs said:
For those needing JIT in the version 2.1.1.A.0.6.
donetus has updated deano309 xrecovery based installer. All you need to do is copy the files to the SD card and update using xrecovery.
http://forum.xda-developers.com/showthread.php?p=11289748#post11289748
Works well.
Click to expand...
Click to collapse
Thanks this i nice TUT but not automate system to install i will write script to do that but now i'm not because i'm have not free time dude
warkxia said:
xRecovery compatible with :
X10 MINI / 2.1.1.A.0.6
Click to expand...
Click to collapse
Please test more as Root and JIT. Thanks for reading my topic !
warkxia said:
xRecovery install but not boot ><
Click to expand...
Click to collapse
Why not boot dude ? Try my AIO installer script : http://forum.xda-developers.com/showthread.php?t=951274 to install xrecovery because xrecovery working 100% on lastest firmware ! i tested so many times
Re: OP
quangnhut123 said:
+Find
Code:
[COLOR="red"]debug.sf.hw=1[/COLOR]
if don't have add one
+Add
Code:
dalvik.vm.execution-mode=int:jit
at the end of file !
- Save file and do continue others step to complete JIT.
Click to expand...
Click to collapse
Hey bro, nice TUT for jit...just wondering, the part in red, what do i replace that with? Or do i just comment it out? Sorry prob a stupid question, im just really sick of having to reflash so just making sure its all good before i flash to my phone.
Cheers,
Jeremy.
jeremyward420 said:
Hey bro, nice TUT for jit...just wondering, the part in red, what do i replace that with? Or do i just comment it out? Sorry prob a stupid question, im just really sick of having to reflash so just making sure its all good before i flash to my phone.
Cheers,
Jeremy.
Click to expand...
Click to collapse
you just need find it if it's exist do nothing . And if not exist please add it after kernel.log=default
PS : As i recommend please backup your phone with xRecovery !
quangnhut123 said:
you just need find it if it's exist do nothing . And if not exist please add it after kernel.log=default
PS : As i recommend please backup your phone with xRecovery !
Click to expand...
Click to collapse
Cheers bro, i thought so but i just wanted to make sure.
And i dont need to back up coz im making my own custom rom and im just enabling jit within it.
Cheers,
Jeremy.
for people who want xrecovery and wants to charge offline (phone off) as well, you just have to follow this post:
http://forum.xda-developers.com/showpost.php?p=11549855&postcount=5
help with xrecovery
hello guys,
just bought myself x10 mini pro and loving it so far. I have successfully rooted and have busy box and su permissions.
next, I followed the following steps for xrecovery but it does not seem to work for me.
Code:
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied !
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
I have copied the 3 files using root explorer and mounting it rw and the permission set to 777. I have also checked the files/permission using adb shell.
I have then turn the phone off, turn it back on and press back < button on the sony ericsson logo but no matter how many times i press or hold the back button it does not take me into recovery menu.
Edit:
my bad, i did not copy over busybox and chargemon because the files were already there from rooting process.
anyone who has this trouble, make sure you copy all the three files to system/bin folder and set the permissions and it should be good.

[Q] Charging Problem...need help!

Why my X10 Mini Pro won't stay off while charging??
It's rooted & JIT enabled, with 2.1.1.A.0.6 firmware............
Yesterday was fine, but this afternoon I rooted my phone and installed xrecovery then JIT.
Everything was okay [looks okay], but the time I charging my phone [2 hours ago] it won't stay off.
Everytime I turn it off, it always turn back on.....Please someone help me!! It's so annoying.
Should I uninstall xrecovery, JIT and unroot it? Or should re-flash my firmware? [hope not]
PS: I always turn off my u20i while charging.
Problem is modified "chargemon" file, installed with xrecovery.
a few features from oem "chargemon" are missing on it.
There is a solution for (big) X10i, but it must be adapted for mini/mini pro.
genyt said:
Problem is modified "chargemon" file, installed with xrecovery.
a few features from oem "chargemon" are missing on it.
There is a solution for (big) X10i, but it must be adapted for mini/mini pro.
Click to expand...
Click to collapse
Can I just fix it by restore the original chargemon file??
Yes, but you will not be able to use xrecovery if you do that.
Sent from my E10a using XDA App
you can get both features: xrecovery, and charge batt staying off.
I think I've found a solution at BIG X10 thread, (look for xrecovery_charge_offline).
I'm neither a developer nor an expert user, and I don't know how to write in English, but I am going to try.
I'm using 2.1.1.A.0.6 firm in U20i and you'll need ROOT in your phone.
First of all, make a backup of chargemon files, both, "SE" one and "xrecovery" one.
then, look at SE chargemon file, its a illegible coded file.
rename it as "charger", (without quotes).
copy it at /system/bin
look at xrecovery chargemon file: you'll see many commands separated by TABS.
insert a command calling charger file as following
#!/system/bin/busybox sh
/system/bin/charger
cat /dev/input/event0 > /dev/keycheck&
sleep 3
kill -9 $!
if [ -s /dev/keycheck ]
then
# remount rootfs rw
mount -o remount,rw rootfs /
# Umount MTDs
umount -l /dev/block/mtdblock1
umount -l /dev/block/mtdblock2
umount -l /dev/block/mtdblock3
# Mount recovery partition
rm -r /sbin
rm -f etc
tar -xf /system/bin/xrecovery.tar
# Umount /system
umount -l /dev/block/mtdblock0
chroot / /init
fi
# Continue booting
exit
Click to expand...
Click to collapse
I've just added "/system/bin/charger" line.
Save file as "chargemon", and copy it to /system/bin
Finally, Test it!!
note: if you edit xrec chargemon file with windows notepad, you'll see commands separated by TABS, not in different lines, so be sure there is a TAB space before AND after "/system/bin/charger" text
Credits:
This fix is adapted (copied really) from xRecovery-charge-offline.zip by zdzihu,
using chargemon from xrec for U20 instead of big X10 one.
More info at:
http://forum.xda-developers.com/showthread.php?t=859571
Try at your own risk!!
Here, you have original and fixed files.
of course, charger file and se original chargemon are the same file.
Thank you genyt.
I've overwritten my original chargemon file.
Can you please provide us a zipd file with all 4 files needed?
And if this works can you please mention it in the xrecovery-Thread http://forum.xda-developers.com/showthread.php?t=878426 ?
Thanks a lot.
Sent from my E10i using XDA App
weissgold said:
Thank you genyt.
I've overwritten my original chargemon file.
Can you please provide us a zipd file with all 4 files needed?
And if this works can you please mention it in the xrecovery-Thread http://forum.xda-developers.com/showthread.php?t=878426 ?
Click to expand...
Click to collapse
done.
Please report if it works... with e10, different firmware versions..
TODO: create an update.zip file installable with xrecovery
in chargemon it should be
cat /dev/input/event1
we had this little bug before.
I changed this and it works fine.
Sorry I'm not familiar with making an update.zip
Maybe the next days I have some time to have a look at it
In the meanwhile here are the corrected files:
http://rapidshare.com/files/4493385...h_genyt_s_fix_for_charge_batt_staying_off.zip
I think this is not an error, but lets see:
if you take a look to BIG x10 files (link in previous post) you can see it has "event2".
but my original file has "event0".
My phone is a mini pro, will mini be "event1"?
What kind of error have you got?
I'm sorry my internet is so sloooooow today.
I have read somewhere here that ist should be 1 to trigger the keystroke.
And in original thread here http://forum.xda-developers.com/showthread.php?t=878426
in the download it is 1 too.
With 0 no reaction while booting.
With 1 everything all right. (Xperia X10 mini)
... have to go to bed now - good night everybody.
verified, x10 mini pro works with "event0".
In conclusion, this method works with x10 mini too, changing event0 to event1.
but using x10 mini version of xrecovery, it comes with event1 "as is".
wow! i followed the guide with changing the SE-chargemon to 'charger' and adding the line in xrec chargemon, and it actually solved my dilema with the xrecovery!
thanks a lot!
now i can charge my U20i offline anytime
Can anyone post the original SE chargemon file for X10 mini 2.1.1.A.0.6?
Thank you!
Sorry I've been busy all day long......
@genyt
TQ for your willingness to help me out.....really appreciate that
So all I have to do now is copy "xrecovery charge fix for u20.zip" file to system/bin??
no, you must extract files in zip file, then, copy 2 unpacked files to system/bin.
Only for U20: X10 mini PRO.
if you have a X10 MINI, you must use weissgold files.
genyt said:
no, you must extract files in zip file, then, copy 2 unpacked files to system/bin.
Only for U20: X10 mini PRO.
if you have a X10 MINI, you must use weissgold files.
Click to expand...
Click to collapse
LOL yeah I know that......! My phone is u20i.
Sorry for my bad english, it's confusing and misleading
Then, we have TWO bad englishes...mine and yours.. LOL
Sent from my U20i using XDA App
from zeroize
Charging off line works for the x10 mini, but when you press the on/off button while charging offlline, It loads the xrecovery menu directly. Is is normal, shouldn't it boot the original menu?
see here http://forum.xda-developers.com/showthread.php?p=11583047#post11583047
Should be the same with PRO.
Maybe it helps to move the call to charger to the end in chargemon.
I tried it, but I didn' got it working.
Here's the fix for
Charging off line works for the x10 mini, but when you press the on/off button while charging offlline, It loads the xrecovery menu directly. Is is normal, shouldn't it boot the original menu?
http://rapidshare.com/files/4496539...t_staying_off-and_weissgolds_fix_for_loading_
On my mini it's working, can you confirm?
Oh sorry --> filename too long --> it's .rar

[Q] help please

i have rooted my x10mp with "superoneclick" then iv installed busyboxinstaller by stericson after that i installed xrecovery manualy but i still cant enter xrecovery.....iv done all this process before with my x10mini and x8 it worked out just fine i m only having issues with my minipro........
somebody please help
slaxlmckagan said:
i have rooted my x10mp with "superoneclick" then iv installed by stericson after that i installed xrecovery manualy but i still cant enter xrecovery.....iv done all this process before with my x10mini and x8 it worked out just fine i m only having issues with my minipro........
somebody please help
Click to expand...
Click to collapse
this is not dev thread related
you should have psted it in q&a
check your chargemon
if you're using the same one you used on your mini you'll fail
find the one for minipro
check you have correct permissions
ooooo
you installed busyboxinstaller
did you install busybox from busyboxinstaller?
because you didnt mention it...
Use this: http://www.megaupload.com/?d=4VZEIYUI
Its a CWM Recovery. I use this recovery on stock rom.
Just unrar those three files to your sdcard, and copy to /system/bin with Root Explorer.
Do Not forget change premission to 644 (rwxr-xr-x) on those three files.
from where can i get minipro chargemon and yeah iv installed busybox ......and i m sorry for posting here iv never posted anything before
thank you soo much gonna try it now
ZaiKoo said:
Use this: http://www.megaupload.com/?d=4VZEIYUI
Its a CWM Recovery. I use this recovery on stock rom.
Just unrar those three files to your sdcard, and copy to /system/bin with Root Explorer.
Do Not forget change premission to 644 (rwxr-xr-x) on those three files.
Click to expand...
Click to collapse
worked like charm thanks a ton buddy

Categories

Resources