Hi I have a samsung vibrant that was running bionix v and it suddenly bricked itself. So i decided to use odin as I have in the past but this time when I get into download mode, it says key pressed, 164 on the top. I then use odin and it flashes successfully but once it reboots it stays on the vibrant screen for about 5-10 seconds and then it shuts itself off. I think its because im using an ld version of odin, which is odin 3 v1.7. I really need help please
Where you using a stock kernel?
Sent from my MB200 using Tapatalk
I am having this same exact exact problem.
I am soo pissed. I have been running fine with Bionix, then day 2 after installing DOW kernel, my internal memory card is fried.
I mean absolutely FRIED.
I can't get past boost screen *(It shuts off like yours does too)
I can't ODIN with anything, because it shuts off. If I try to plug it in, it will just battery charge loop.
I'm at a loss here too.
I've installed Eugene's OC kernel, TTbal's OC kernel, and the old DOW OC kernel's fine. Everything has been great. My phone handled 1.4 like a champ.
But now, nothing works. NOTHING.
*sigh
I also installed dow kernal and then a few days after that it just suddenly decided to shut itself off
Sent from my T-Mobile myTouch 3G Slide using XDA App
If it turns on its NOT bricked....this term is soooo loosely used.
odin back,reflash and allow 10-15 minutes to set up after full boot
Sent from my SGH-T959 powered by TW's Bionix V1.2.1,DOW.
ameedi600 said:
Hi I have a samsung vibrant that was running bionix v and it suddenly bricked itself. So i decided to use odin as I have in the past but this time when I get into download mode, it says key pressed, 164 on the top. I then use odin and it flashes successfully but once it reboots it stays on the vibrant screen for about 5-10 seconds and then it shuts itself off. I think its because im using an ld version of odin, which is odin 3 v1.7. I really need help please
Click to expand...
Click to collapse
If it turns on then it is not bricked, although it can be frustrating to fix it.
I will suggest following
1) Start ODIN and get Vibrant in download mode
2) ODIN Eugene's Froyo-that-does-NOT-brick. Do not check re-partition in ODIN. Do not use PIT512 file to re-partition
3) Reboot
4) Start ODIN again and get your Vibrant in Download mode again
5) ODIN PIT512 file and UVJFD stock, make sure you check repartition in ODIN this time.
6) Reboot
7) Re-root and install ROM Manager from Market
8) CWR flash or ODIN whichever version of ROM you like.
I hope this help.
You're probably in luck because the phone still turns on. In the future try to be real specific about what you were doing leading up to the bricking, things usually don't suddenly brick themselves. Follow ssiddiqi1's instructions and you should be fine.
Sent from my Vibrant using XDA App, Bionix-v 1.21
Try this: http://forum.xda-developers.com/showthread.php?t=954509
There have been several people, including myself, who have had this problem. No matter what you Odin, Including Eugene's no brick fix, the phone will not boot into recovery mode after Odin flashes a .tar file. No combo of .pit and .tar files work and it dose not matter what version of Odin you use. Nothing works. Trust me people the phone is BRICKED and there is no fix for it. Sorry.
Some threads about the same problem.
http://forum.xda-developers.com/showthread.php?t=955593
http://forum.xda-developers.com/showthread.php?t=956164
http://forum.xda-developers.com/showthread.php?t=955623
http://forum.xda-developers.com/showthread.php?t=957675
drewdude007 said:
There have been several people, including myself, who have had this problem. No matter what you Odin, Including Eugene's no brick fix, the phone will not boot into recovery mode after Odin flashes a .tar file. No combo of .pit and .tar files work and it dose not matter what version of Odin you use. Nothing works. Trust me people the phone is BRICKED and there is no fix for it. Sorry.
Click to expand...
Click to collapse
Version of ODIN does not matter, I agree. But if phone turns on, it is not bricked. Probably partition is messed up. Eugene no brick froyo (without a PIT file and no repartition) should get the phone to boot into a buggy vibrant 1900 version, then ODIN with PIT512 and repartition should get you back into bootable phone with fixed partition.
As I said it is frustrating but it is fixable. I had exact same scenario with Eugene Dead Horse kernel. The steps I wrote in my other posting, fixed the problem.
EDIT: You do not need Recovery mode. Recovery is not going to do any good due to messed up partition. You need only Download mode for ODIN to ODIN no-brick-froyo then UVJFD.
ssiddiqi1 said:
Version of ODIN does not matter, I agree. But if phone turns on, it is not bricked. Probably partition is messed up. Eugene no brick froyo (without a PIT file and no repartition) should get the phone to boot into a buggy vibrant 1900 version, then ODIN with PIT512 and repartition should get you back into bootable phone with fixed partition.
As I said it is frustrating but it is fixable. I had exact same scenario with Eugene Dead Horse kernel. The steps I wrote in my other posting, fixed the problem.
Click to expand...
Click to collapse
So I just tried it again to be sure. I flashed Eugene's no brick Froyo with no .pit and re-partition NOT checket. I then flashed JFD with the 512.pit and checked re-partition. I get the same results... Odin flashes and says completed at which point it should boot into recovery and finnish doing its thing. However all the phones with this problem fail to boot into recovery and just keep showing the battery charging, turn off, and show the battery charging picture over and over until I unplug the usb. At which point I press the power button and it boots up to the Vibrant splash screen the shuts off. This happens every time.
Sent from my MB200 using Tapatalk
Drewdude
Why should it boot into recovery after you ODIN JFD and repartition. It should reboot normal. Are you sure, you have a good UVJFD.tar file? A while ago, UVJFD odining messed up my phone. It was bad UVJFD.tar file. I would recommend go to Teamwhisky web site at http://www.teamwhiskey.com and look for Shorty's File Locker. I used UVJFD, PIT and ODIN from Shorty last week and it worked. Here is a direct link to it http://board.teamwhiskey.com/viewtopic.php?f=3&t=1322
Also successful Odining of Eugene's no-brick-froyo should boot you into a normal boot with a few errors, no Recovery. If needed, I can upload my copy of Euegen's no-brick-froyo, which had always helped me.
The ONLY .tar file that would flash and boot up the phone is the JK2 .tar found in this thread.
http://forum.xda-developers.com/showthread.php?t=799105
However, after flashing it I get the this error message and the phone does not access to the internal or external memory card.
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
After Odin the phone will not boot up at all. I have downloaded the .pit and .tar files from Team Whiskey's site and i get the same thing.
drewdude007 said:
The ONLY .tar file that would flash and boot up the phone is the JK2 .tar found in this thread.
http://forum.xda-developers.com/showthread.php?t=799105
However, after flashing it I get the this error message and the phone does not access to the internal or external memory card.
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
Click to expand...
Click to collapse
I think, you are not getting your Internal SD card partitioned properly, therefore mounting issue. Maybe download again pit512 file from Shorty's File locker? Sometime during download files get corrupted. Its worth downloading it again. Also in ODIN check options Re-Partition, Auto Reboot and F. Reset Time. Do not check Flash Lock, Do not check Phone EFS Clear and Phone Bootloader.
I had been using ODIN3 v1.81. Karylon360 posted it on XDA a few days ago. YOu should find it in Vibrant Dev Section.
EDIT: See dan0zone post below
drewdude007 said:
The ONLY .tar file that would flash and boot up the phone is the JK2 .tar found in this thread.
http://forum.xda-developers.com/showthread.php?t=799105
However, after flashing it I get the this error message and the phone does not access to the internal or external memory card.
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
Click to expand...
Click to collapse
There are files on the data side of JDF that is needed to boot if you wiped everything ... so if you got JK2 to boot to this error then ODIN to JDF and you should be good ....
No matter what when I Odin JFD, and I have downloaded and re-downloaded the .pit and .tar files from from Team Whiskey's site as well as others, I get the same results and the phone won't boot.
I am getting a replacement phone, thank god. However, I would really like to find a fix for this so I do appreciate all the help!
I did post this problem on Team Whiskey's Facebook page if anyone would like to see all the things I did yesterday. Just scroll down and look for my (Andrew Neubauer) post.
http://www.facebook.com/home.php?sk=group_180393771989565&ap=1
I still need help, I am now stuck on the setupconnection on odin, I was going to try to flash eugenes no brick but I cant find it on xda. Can someone please help me and can someone also maybe post a link to eugenes no brick
nevermind I got through the setup connection part Thank you to all that helped
Related
After trying to partition the EXT feature within CLMR once my phone reset it came back up with the boot screen everything normal than nothin but a blank screen. I go back Reflash with Odin and Current Vibrant-Tmo image on here. Result was delayed audio for TMobile start up GIF and sound and no Screen response. Wen tback attempt #2 with Odin/T959UVJD flash phone resets and goes absolutely dead. Remove battery same thing. Anyone else have trouble with Clockwork Mod's partitioning?
I also noticed if you get the phone-!-pc error just running the 512pit file seems to fix it atleast it did for me.
If you had read up on here, you would know that Clockwork tries to partition the internal flash and breaks your phone. You need to Odin flash with the "re-partition" box checked. That should fix it. I have posted a ZIP you can flash that will parition the external card properly, you can edit the script and change the partition sizes if you like, it's set to create a 1GB partition for EXT4 with the remainder as FAT32.
It has been said several times in several places...
DO NOT PARTITION WITH CLOCKWORKMOD RECOVERY
I reflashed with Odin and checked Repartition and thats when it just died after reset, no power no nothin.
I also made the noob mistake of partitioning with clockworkmod . However, my device wasn't bricked. instead, it left absolutely zero memory left for third-party apps and the like. I'm not sure if I should reflash with ODIN since my issue isn't as serious as a brick. Any experienced members on this thread please help.
honoluluacx said:
I also made the noob mistake of partitioning with clockworkmod . However, my device wasn't bricked. instead, it left absolutely zero memory left for third-party apps and the like. I'm not sure if I should reflash with ODIN since my issue isn't as serious as a brick. Any experienced members on this thread please help.
Click to expand...
Click to collapse
Follow this
http://forum.xda-developers.com/showthread.php?t=745547
^ Since the links in that thread no longer work (Eugene left XDA), all you need to do is flash eugenes froyo that doesnt brick (sounds like you have it), pull the battery when done, then flash the stock ODIN pit/tar for JFD, Fixed.
True, that works even better
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html
s15274n said:
^ Since the links in that thread no longer work (Eugene left XDA), all you need to do is flash eugenes froyo that doesnt brick (sounds like you have it), pull the battery when done, then flash the stock ODIN pit/tar for JFD, Fixed.
Click to expand...
Click to collapse
So do I need to reflash eugene's froyo rom or, since I already have it, skip the reflash and go straight to odin? Also, thanx in advance for all the helpful senior members.
HELP!!! I followed the instructions to the letter, but after about three attempts with ODIN, by vibrant still won't boot up. I can still get to download mode, but can't reboot.
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
honoluluacx said:
HELP!!! I followed the instructions to the letter, but after about three attempts with ODIN, by vibrant still won't boot up. I can still get to download mode, but can't reboot.
Click to expand...
Click to collapse
Are you online?
I followed the guide. Unfortunately, the device hanged during the reboot. I didn't do anything during that time, so I threw in the towel and told T-Mobile I tried to update to 2.2 and sent it in. Thanks for the links though.
So I went to Odin my phone back to stock JI6 in Odin and I used the tar and pit file and select re-partition to wipe everything. Everything went fine and it rebooted, but now it brings me to the Recovery menu and says:
e:Can't mount /dev/block/st110 (Invalid argument"
E:copy_dbdata_media:Can't mount DBDATE:
copy default media content failed.
I've tried to reboot into download mode via the keys, and through adb, but I can't get there to install the OS...
Any help?
Thanks!
sano614 said:
So I went to Odin my phone back to stock JI6 in Odin and I used the tar and pit file and select re-partition to wipe everything. Everything went fine and it rebooted, but now it brings me to the Recovery menu and says:
e:Can't mount /dev/block/st110 (Invalid argument"
E:copy_dbdata_media:Can't mount DBDATE:
copy default media content failed.
I've tried to reboot into download mode via the keys, and through adb, but I can't get there to install the OS...
Any help?
Thanks!
Click to expand...
Click to collapse
1.) Make sure you are using something that is NOT 'Odin3 1.0' the best versions are 'Odin3 1.3 & Odin3 1.7' IMO
2.) Make sure you are using JFD Stock to odin back.
Master™ said:
1.) Make sure you are using something that is NOT 'Odin3 1.0' the best versions are 'Odin3 1.3 & Odin3 1.7' IMO
2.) Make sure you are using JFD Stock to odin back.
Click to expand...
Click to collapse
I am using Odin3 v1.30.
But how am I going to get JI6 or even JFD on the phone? It won't start up, just keeps going to this menu where my only options are reboot system now, reinstall packages (does nothing) delete all user data and delete cache data..
sano614 said:
I am using Odin3 v1.30.
But how am I going to get JI6 or even JFD on the phone? It won't start up, just keeps going to this menu where my only options are reboot system now, reinstall packages (does nothing) delete all user data and delete cache data..
Click to expand...
Click to collapse
You don't reinstall packages.
Just use JFD that is the one that is most likely to work. Not all work for everyone.
JI6 doesn't work for me.
To use Odin, you go into download mode. You don't use recovery.
Master™ said:
You don't reinstall packages.
Just use JFD that is the one that is most likely to work. Not all work for everyone.
JI6 doesn't work for me.
To use Odin, you go into download mode. You don't use recovery.
Click to expand...
Click to collapse
That's the thing, I can't get into download... Neither the hardware buttons or adb will get me there.. I type adb reboot download, and it takes me to the menu with the above options I mentioned.
sano614 said:
That's the thing, I can't get into download... Neither the hardware buttons or adb will get me there.. I type adb reboot download, and it takes me to the menu with the above options I mentioned.
Click to expand...
Click to collapse
So you are hardware locked? The following MAY or MAY NOT work...
1.) Turn off your phone, remove battery/sim/micro SD
2.) Press & Hold the VOL UP+VOL DOWN
3.) Plug your phone into your computer (Keep holding those buttons)
4.) Download mode should pop up.
Master™ said:
So you are hardware locked? The following MAY or MAY NOT work...
1.) Turn off your phone, remove battery/sim/micro SD
2.) Press & Hold the VOL UP+VOL DOWN
3.) Plug your phone into your computer (Keep holding those buttons)
4.) Download mode should pop up.
Click to expand...
Click to collapse
I shouldn't be hardware locked, I flashed the file to get rid of the hardware lock before I used Odin earlier and was able to get into Recovery via the buttons (didn't try download though.. DOH!)
I was able to get into download mode now, though, and am flashing JI6 while JFD downloads (very slowly). JI6 finished and same error... Will wait for JFD to be done.
Thank you very much, Master. Merry Christmas.
I'm all set now. Thank you for all your help, Master.
how did you get the phone running again, i mean i can go to the download screen, but after any update I still recieve the same recovery screen with error.......... tried so many things none of them work, what to do?
jaiiscool said:
how did you get the phone running again, i mean i can go to the download screen, but after any update I still recieve the same recovery screen with error.......... tried so many things none of them work, what to do?
Click to expand...
Click to collapse
What are you trying to flash? I had to use Odin to flash JFD, not JI6 as that just kept sending me to that same recovery screen with the error.
sano614 said:
What are you trying to flash? I had to use Odin to flash JFD, not JI6 as that just kept sending me to that same recovery screen with the error.
Click to expand...
Click to collapse
I have a Galaxy S with this error, I am trying to flash the DDJP6 firmware with ODIN, I had checked the repartition by mistake and got this error, don't know what to do now.
Hello everyone, if your reading this you likely have the error mentioned above. Recently, a friend of mine came to me with this same problem. I looked long n hard and every link I found was broken. Every odin file I needed was removed. I even noticed that eugene kindly took down his odin to stock package...that was pretty cool of him At any rate, I still had eugenes odin to froyo zip luckily, I tried flashing this normaly thru odin and got the same error. What ended up working for my buddys phone was, using eugenes odin package and putting a check in "re-format" in odin. That fixed it right up. If your having the same errors, please feel free to contact me. Id be happy to link you or do anything else in power to help. This worked like a champ! Good luck. If this helped ya, please feel free to hit my thanks button. I only have 3!
JFD is the only one that carries all the necessary files for the check-repartition ODIN install...
Something to do with flashing both bootloaders.
EricDET said:
JFD is the only one that carries all the necessary files for the check-repartition ODIN install...
Something to do with flashing both bootloaders.
Click to expand...
Click to collapse
Nope, nothing to do with bootloaders. It has to do with jfd being the only realeased odin package that contains dbdata.rfs of the .tar. None of the other ones do.
Sent from my SGH-T959 using XDA App
I went to partition my sd card through rom manager, I have all the files on my computer (all different versions since November). It went into recovery, mounted sd, was formatting and next thing I knew it is stuck on the overstocked logo. I am running Trigger 3.0 & flashed in overstocked (through rom manager) and themed with a splash of color with other modifications.
The thing is, is that I also have the vibrant galaxy s 4g and was using the 16gb sd for both until my 32 came in and realized, not a good idea. So until the 32 came in I decided to just work on this phone but wanted to get any signs of the 4g off this phone so was cleaning it up and now here I am.....
Read the threads here and have gotten into the download mode, with nothing to download but it goes right back to the "overstocked" logo or bouncing to the "vibrant" logo and battery sign.
Any suggestions would be greatly appreciated.
EricDET said:
JFD is the only one that carries all the necessary files for the check-repartition ODIN install...
Something to do with flashing both bootloaders.
Click to expand...
Click to collapse
I used Eugene_2E_JK2_Froyo.tar.md5, and s1_odin_20100512.pit. I checked re-partition and left F. reset time and auto reboot checked. This solved the e:Can't mount /dev/block/st110 error. Idk if this will work for everyone, but using the exact same files but without re-partition checked left the same error, checking it fixed the error. Just thought Id share my results because that can be a very frustrating error which in my friends case caused fc's all over the place, while booting up and a bunch of apps as well.
Hello,
I consider myself a fairly technical person, and I recently had my phone lock up while running Nero V3 for my Samsung Vibrant. When I tried to reboot (battery pull) my internal SD was corrupted, so i decided to return to stock. I was not running any lag fixes at this time. Upon flashing to stock with Odin, I was greeted with a black screen and 4 lights. I've been trying everything to fix this. I saw that many people with the same issue have had luck flashing Eugene's Froyo that Doesn't Brick, and then flashing the JFD stock rom. I tried this as well, and have had no luck.
I am stuck. I don't know what to do. I have managed to load CWM recovery, and i can adb into the device, but when I try to push an update.zip, I get an I/O error.
Any help would be appreciated. I'm just not suer where to go from here. I really believe if I could just format and re-partition the internal SD, I would be able to get it all back...
Thanks.
When you say you flashed "eugenes froyo that doesn't brick", how did it not work? Were you able to get into download mode and odin the proper files? Did it error out?
Sent from my SGH-T959 using XDA App
cheesmo said:
Hello,
I consider myself a fairly technical person, and I recently had my phone lock up while running Nero V3 for my Samsung Vibrant. When I tried to reboot (battery pull) my internal SD was corrupted, so i decided to return to stock. I was not running any lag fixes at this time. Upon flashing to stock with Odin, I was greeted with a black screen and 4 lights. I've been trying everything to fix this. I saw that many people with the same issue have had luck flashing Eugene's Froyo that Doesn't Brick, and then flashing the JFD stock rom. I tried this as well, and have had no luck.
I am stuck. I don't know what to do. I have managed to load CWM recovery, and i can adb into the device, but when I try to push an update.zip, I get an I/O error.
Any help would be appreciated. I'm just not suer where to go from here. I really believe if I could just format and re-partition the internal SD, I would be able to get it all back...
Thanks.
Click to expand...
Click to collapse
If you are able to boot into clockwork recovery you can format your internal sdcard there. That should fix your corruption issue. After that I would boot into download mode and Odin stock JFD with re-partition clicked. Hopefully that gets you up and running. Then if you actually NEED any files from you internal sdcard (like pictures) there are programs out there that let you recover items off erased harddrives. Just be sure to do that before filling up your sdcard with new stuff. Hope this helps and good luck.
Eugene's Froyo that doesn't brick gave me an error, and I read that it was supposed to. So from there, I got into download mode and used Odin to install the JFD Stock Rom. Odin was always successful when it came to installing and rebooting my device.
Recovery "says" that it sucessfully formats my sd card, but the files remain, and I still cannot boot. When I use Odin to flash any other ROM, I get the same result. I either get a black screen with 4 lights, or it gets hung up on the Samsung Vibrant screen.
Also, I'm not concerned with any files on the internal SD.
If you can get into cwm recovery and download mode, you should be able to get out of this. Try to format sd from cwm as whitehawk suggested. Did jfd odin error out as well? Can you restore from cwm?
Sent from my SGH-T959 using XDA App
cheesmo said:
Recovery "says" that it sucessfully formats my sd card, but the files remain, and I still cannot boot. When I use Odin to flash any other ROM, I get the same result. I either get a black screen with 4 lights, or it gets hung up on the Samsung Vibrant screen.
Also, I'm not concerned with any files on the internal SD.
Click to expand...
Click to collapse
Didyou repartition in odin when you flashed back to stock or on eugene's froyo that doesnt brick?
Sent from my SGH-T959 using XDA App
Yes, I re-partitioned in Odin. I've tried several times, and the last time, I repartitioned on the stock ROM.
Thanks, NightHawkx! I am giving that a try now. crossing fingers...
ODIN says:
"<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)"
Phone reboots, blank screen. All 4 buttons lit up when I tapped home. Nothing more.
I wonder if it's something wrong with my device. It seems like it should be reparable. I would rather not take it to T-mobile. I don't know what they'd so since it's been rooted and had custom roms.
cheesmo said:
I wonder if it's something wrong with my device. It seems like it should be reparable. I would rather not take it to T-mobile. I don't know what they'd so since it's been rooted and had custom roms.
Click to expand...
Click to collapse
You need to delete the jfd file and the 512 pit file from your computer and redownload them
I would be happy to try. Where should I get them from?
Also, is there a way to delete my Internal SD from my pc or adb?
Downloading now from Vibrant Bible Sticky post link.
Same result.
Try this fix and you should also take out your sim card and your external sd card
Same result.
I wonder if, since Nero is stuck on my phone, and the file system is unreachable, is there a way to load Nero on my phone? I can't from CMRecovery, I tried. Can I Odin a copy of that rom on there? Just long enough to remove the files and reflash?
cheesmo said:
upon flashing to stock with odin, i was greeted with a black screen and 4 lights.
Click to expand...
Click to collapse
there. Are. Four. Lights!!!
cheesmo said:
Same result.
I wonder if, since Nero is stuck on my phone, and the file system is unreachable, is there a way to load Nero on my phone? I can't from CMRecovery, I tried. Can I Odin a copy of that rom on there? Just long enough to remove the files and reflash?
Click to expand...
Click to collapse
I believe the key is you need to find a voodoo kernel you can push via odin. I searched a little and found this post http://forum.xda-developers.com/showthread.php?t=877800 If you scroll down in the OP you will find a section called "Downloads" the bold text in gold will link you to a voodoo .tar kernel.
Hope this helps
Hmm...maybe a dumb question...but did you wipe data in recovery before rebooting?
Sent from my SGH-T959 using XDA App
nickmcminn60 said:
You need to delete the jfd file and the 512 pit file from your computer and redownload them
Click to expand...
Click to collapse
If the phone cannot get past the black screen, just delete the CWM zip and tell t-Mobile it just stopped working, they wont be able to get further than you and will give you a new phone.
I was running Bionix-v 1.1.2 and the DOW kernel and everything was working great. My phone then got stuck on the DOW boot up image so i used Odin to flash back to stock like I have done countless times. I am able to get the phone into download mode and I start Odin and it states All threads completed. (succeed 1/failed 0) >Removed. At witch the phone would normally boot into recovery mode and Odin would finish doing its thing but my phone will now just show the battery charging picture, go black, then the battery charging picture again until I unplug the usb. The phone will power up to the Vibrant splash screen then go black. I can get the phone into download mode but I always get the same results when I try to flash with Odin. Any help would be appreciated... Thanks.
try another .tar... you can grab some in the noob guide/alt method in my signature. Its KA2 froyo leak + root. Others are in the Deb Bible too...
k i flashed another .tar(KA2 froyo leak + root) it boots into recovery and I get the following:
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
drewdude007 said:
k i flashed another .tar(KA2 froyo leak + root) it boots into recovery and I get the following:
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
Click to expand...
Click to collapse
I got the same error when running some test kernels. Try flashing JFD also flash the 512.pit file and check repartition in Odin . If that doesn't work flash Eugenes froyo that doesn't brick .
Sent from my SGH-T959 using XDA App
I downloaded a new copy of JFD and 512.pit checked repartition. Still was not able to get into recovery after Odin even with the new copy. Eugenes froyo that doesn't brick gave me the same can't mount error message.
Having the same issues.....JFD simply won't boot, Eugene's Froyo that wont brick makes it through the boot animations and then locks with the touch buttons lit up, Eugene's JK2+2E boots fine, but has this problem (internal and external storage show up as unavailable). I'm pretty sure it's related to using ODIN with Voodoo enabled and I've been going crazy all day trying to find a fix, but to no avail so far. ANY help would be incredibly appreciated!!
Try older odin programs. Yes u read that right.
Sent from my SGH-T959 using XDA App
I tried Odin3 v1.0, v1.3, v1.7, and v1.81 all with the same results.
drewdude007 said:
I tried Odin3 v1.0, v1.3, v1.7, and v1.81 all with the same results.
Click to expand...
Click to collapse
Then its your files. Download stock jfd again . Pit and tar. Do both. If you can delete your dalvik do.
Sent from my SGH-T959 using XDA App
Drewdude, since we're having the same problems, we should confer about it through some IM system in a little bit... two heads are better than one, right?
Well I have also tried Heimdall as well... no success with Heimdall either. So my final solution to the problem is I called T-Mobile and told them my phone would not turn on. My new Vibrant will be here in 3 days at no charge.
OP,
I just experienced the SAME Exact problem. THE VERY SAME.
Something tells me it's the DOW kernel.
W.T.F.
I've tried all the ODIN files that are available.
In each one, I get Vibrant, then it goes blank and turns off. Nothing else.
My phone is fried.
More likely than not, youre not fried, just soft-bricked same as me. Can you get your phone into download mode? Hold vol + and vol - while inserting your micro-sd cable...it should go to a picture of a yellow android with a shovel. If you can get to this mode, your phone is NOT fried.
THat's the only mode I can get into bud.
I've tried to load JI5 Ji6, Eugene's nonbrickin g Froyo.
None of the roms get past the vibrant screen.
THey just shut off.
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death!
Try these step from oka1 . He say to flash Eugenes froyo without repartition checked then pull the battery when tries to boots . Then flash JFD with repartition checked.
Probably you will need a couple of things in your tool kit.
You will need Odin 1.3 or higher
Pit file (there are 512 and 831) Guessing you will need the 512pit
Original JFD stock file 2.1
Eugenes froyo that does not brick
Remove the sim and the sd card, remove the battery have Odin up on the computer> then hold down the 3 buttons and plug in the phone to the usb connected to computer. If this works and Odin sees the phone (does not matter if it says com5 or 6 etc.) then you can go from there, If not then you will need a jig, people here sell them, i saw connextion2005 sells them but there are others (like 8bucks) or you could make it is 301k resistors tied to one 2 pins of the usb (do a search if you are interested).
Then the sequence for the fix is to flash the Froyo first that does not brick (do not check repartition) once it begins to reboot pull the battery out (does not need to reboot) then flash the JFD on top and this time check the repartition
Let this finish reboot> then use super one click root or other of your choice. Then download CWM and Titanium backup...... flash your new rom and you are back in business.[/QOUTE]
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
AgentFour20 said:
Try these step from oka1 . He say to flash Eugenes froyo without repartition checked then pull the battery when out boots . Then flash JFD with repartition checked.
Probably you will need a couple of things in your tool kit.
You will need Odin 1.3 or higher
Pit file (there are 512 and 831) Guessing you will need the 512pit
Original JFD stock file 2.1
Eugenes froyo that does not brick
Remove the sim and the sd card, remove the battery have Odin up on the computer> then hold down the 3 buttons and plug in the phone to the usb connected to computer. If this works and Odin sees the phone (does not matter if it says com5 or 6 etc.) then you can go from there, If not then you will need a jig, people here sell them, i saw connextion2005 sells them but there are others (like 8bucks) or you could make it is 301k resistors tied to one 2 pins of the usb (do a search if you are interested).
Then the sequence for the fix is to flash the Froyo first that does not brick (do not check repartition) once it begins to reboot pull the battery out (does not need to reboot) then flash the JFD on top and this time check the repartition
Let this finish reboot> then use super one click root or other of your choice. Then download CWM and Titanium backup...... flash your new rom and you are back in business.[QOUTE/]
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Thanks but I have tried this method over and over again and it does not work for me. My phone is dead!
Click to expand...
Click to collapse
So is mine.
Somebody in the DOW thread said to use ODIN to flash the original Bionix Kernel only.
I don't see how that's helpful now since I've already flashed all the other 2.1 Tmobile roms.
This is F(ked.
unless somebody knows how I can flash a bionix rom using ODIN? I might be able to get that Bionix V stock kernel on there too.
Thanks
drewdude007 said:
AgentFour20 said:
Try these step from oka1 . He say to flash Eugenes froyo without repartition checked then pull the battery when out boots . Then flash JFD with repartition checked.
Thanks but I have tried this method over and over again and it does not work for me. My phone is dead!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
This thread has a similar issue to what im having, but ive branched off elsewhere...
http://forum.xda-developers.com/showthread.php?t=883944&highlight=Rom+Manager+partition+recover
The story: Ive had a rooted vibrant for a while. Im no linux noob, either. I was having some issues so i decided to try Darky's Toxic rom...worked GREAT! I made a clockwork backup...now i felt it safe to start to play.
I was having media scanner issues...so i decided to repartition my storage spaces (and to get rid of the avatar movie)...but i used ROM manager...clearly by mistake. whoops.
So after MUCH trouble with boot looping...i was able to ODIN to Eugene's Froyo that doesnt brick. The STOCK rom wouldnt give me video...just hung after the Galaxy S boot seq. Im assuming thats a voodoo issue?
Anyway...able to get Eugene's on there...and i was smart and made a back up of both storage spots. I reloaded CWR, and tried to restore to the backup of Toxic i made with no luck. Matter of fact, i cant get any other ROM to load that ive tried.
Any suggestions to get my restore point back up and running? I thought about trying to go stock...but like i said, i couldnt get to stock through ODIN.
Couple of Ideas........ I am assuming you can get into download and recovery.
If you can get into recovery, clear cache, wipe dalvik then, pull battery and get into download, then try odin back to stock, remember to check repartition.
Or try Heimdall, sometimes it works when Odin does not. But if you can get into download then, there is a way (or some combo of ways) to get you back to stock. Just be patient and logical......... you will get it..........good luck
I CAN get into download and recovery...and was able to get CWR back on...thankfully.
I have tried every combo of wipes i can think of.
If i flash to true stock 2.1...i get black screen with lit buttons.
If i flash to Eugene's...i can boot into a ROM build with no internal storage, therefore no way to install apps.
I just came across this and tried it...with no new results.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
I'll try your suggestion now...thanks!
Still no luck. Same thing...black screen, with lit buttons.
Did i officially brick this thing?! haha...i thought it barely possible with the vibrant.
I tried flashing the JI6 rom too....still no go.
Anything?
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Same problem
I had this exact issue two days ago and after many attempts with Odin, like you, the only ROM I could load was Eugene's. Re-Partitioning with Odin had no affect, stock wouldn't work and wiping everything had no affect. With Eugene's it would show no space for apps and wouldn't hold any settings if the phone was rebooted. It seems that clockwork mod is actually removing the apps partition and no tool I could find would actually recreate it. I searched quite a bit and found several posts all with the same issue and in every case they had to replace the phone. Luckily I am still under warranty so T-Mobile is replacing it. I don't know if the Clockwork Mod developer has a thread on here, but that "feature" needs some work or it needs to be removed.
kadashti said:
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Click to expand...
Click to collapse
Yes, ive used both the vanilla JFD tmo tar, and the JI6 tar. Neither worked. Triend both the 512 and the 513 PIT file. 512 for the first HUNDRED times...then 513 for the hell of it, since at this point, i was getting nowhere.
And thanks pamulli, thats what im basically resigning to..i just needed to hear it from another person.
REMINDER: It is as easy as fat fingering the keyboard to totally screw your phone. Click carefully!