Mozart randomly reboots and asks to reset to factory settings - 7 Mozart General

Hello,
My Mozart has been slaggish for a month or so now and I used to get freezes for like a minute. Then applications would refuse to start unless I tried like 3-4 times. As I was walking today I got the phone out of my pocket to check the time only to notice a message prompting me that I must reset to factory defaults as all my files are corupted. Done that and then the phone entered an endless reboot loop. Doing another hard-reset allows me to start configuring the phone again but it's a matter of time before it restarts on its own and prompts for a hard-reset. This is an Orange UK phone and I havent seen any ROMS to flash and see if that resolves the issue. I was about to dish out £500 for the Samsung Omnia 7 but it turns out the device has similar issues and so is the HD7. Anyone knows if this is easy to fix? I feel terrible for giving my HD2 away so I guess I am going for an iPhone 4 instead.

Sounds like an issue with SD Card, could be corrupted. Your best option would be to send it back for repair as faulty or if you are adventurous (and don't need your warranty) you can attempt to replace the SD Card yourself.
I have accessed the SD on my Mozart and it isn't that difficult, it just requires the correct tools and patience.

meegulthwarp said:
Sounds like an issue with SD Card, could be corrupted. Your best option would be to send it back for repair as faulty or if you are adventurous (and don't need your warranty) you can attempt to replace the SD Card yourself.
I have accessed the SD on my Mozart and it isn't that difficult, it just requires the correct tools and patience.
Click to expand...
Click to collapse
Thanks
I replaced the card and the phone works. Seems to be a bit slowish though. Must be the write speed of the card

Awesome, I'm glad that worked.
Just out of curiosity, what card did you replace it with?

how to access sd card
meegulthwarp said:
Awesome, I'm glad that worked.
Just out of curiosity, what card did you replace it with?
Click to expand...
Click to collapse
Guys anyone if you could provide me a link where I can learn how to replace or access the sd card , will be appreciated .

Related

problem with my minisd card

hello,
this evening i put my phone on standby and when i tryed to turn it on again the screen wouldn't work, so i soft resetted my phone and it started up fine, BUT then i got a couple of errors because my phone couldn't find some program files from my storage card, so i used file explorer to check and it turns out i can't see my storage card anymore, i tryed to soft reset it etc. but nothing worked, i plugged the card into my cardreader and my computer doesn't show the card either, so i think something is wrong.
is anyone familiar with this problem or has anyone got a solution for me?
thanks alot in advance!
Greetings Richard
riggard said:
hello,
this evening i put my phone on standby and when i tryed to turn it on again the screen wouldn't work, so i soft resetted my phone and it started up fine, BUT then i got a couple of errors because my phone couldn't find some program files from my storage card, so i used file explorer to check and it turns out i can't see my storage card anymore, i tryed to soft reset it etc. but nothing worked, i plugged the card into my cardreader and my computer doesn't show the card either, so i think something is wrong.
is anyone familiar with this problem or has anyone got a solution for me?
thanks alot in advance!
Greetings Richard
Click to expand...
Click to collapse
i think i had the same problem try to format the card on a digital camera and if you have a canon digital camera it should have the option to low level format if not look for a app that does low level format and if after this it still does not work try to see if the card still has warranty and send it to get it replaced.
ultraprimeomega said:
i think i had the same problem try to format the card on a digital camera and if you have a canon digital camera it should have the option to low level format and if after this it still does not work try to see if the card still has warranty and send it to get it replaced.
Click to expand...
Click to collapse
ok i'll go try right away, yeh the card still has warranty and this is the 2nd time this happened to me (1st time i already got a new card, lol!)
well, the camera says it has to be formatted, but when i try to, it fails, so i guess my card is screwed, again...
well i'll go to the shop in a few mins and hope they'll give me another one again
ok, today i got my new card (unfortunately i hadn't backed my last one up ) and i'm busy installing it again.
but what i was wondering is, why does this problem occur?
What brand of card do you have?
Cing 8125 said:
What brand of card do you have?
Click to expand...
Click to collapse
sandisk

Take out SD card when flashing? sim?

I forget where i saw it posted, but do people feel it makes any difference whether you flash a ROM with the sd card in, or the sim?
i tried flashing with all combinations and they all worked. But just to be on the safe side I try to remember to take both out when flashing.
my first few flashes i removed SIM and SD card, then i got lazy and just started flashing with them in. I've probably flashed 15 or more times with them both in and haven't run into any problems.
Dyaus said:
my first few flashes i removed SIM and SD card, then i got lazy and just started flashing with them in. I've probably flashed 15 or more times with them both in and haven't run into any problems.
Click to expand...
Click to collapse
Same here lol
never took out either. nothing has ever happened.
I used to take them both out for every single flash.
Now I just take the SD card out so TomTom wont start installing if I left files on there by accident.
(also while I flash I clear out all the crap and pile of CABs I build up on there through a card reader)
SIM card stays in to autodetect if the rom wasnt optimized for ATT.
frankbnj84 said:
never took out either. nothing has ever happened.
Click to expand...
Click to collapse
Ditto. No probs here.
I always flash from sd card, so not much choice
Does anyone know why this is discouraged to begin with? Do any chefs have any insight into this?
HyoImowano said:
Does anyone know why this is discouraged to begin with? Do any chefs have any insight into this?
Click to expand...
Click to collapse
try using the forum's wonderful search function
Maybe its due to other models of phones that might format sd cards, memory cards or other storage mediums when being flashed. But seems here its all good for the Raph for now
I recall reading somewhere here that the only reason for removing sim was to prevent incoming calls from interrupting the flash process. Only reason to remove sd card was to prevent unwanted software installation.
No i BELEIVE DUE TO THE EARLY STAGES OF SPL MODIFICATION IN PREVIOUS PHONES SUCH AS THE HERMES, IN MY CASE THE 8125. tHIS WAS THE PROCEDURE WHEN FLASHING BACK IN THE DAY. This has not been the case for quite some time. sorry for caps but dont feel like editing on my phone.
the same
dabs said:
I always flash from sd card, so not much choice
Click to expand...
Click to collapse
only Hard SPL with PC
im doing also with SD card and let sim on TP and do hard reset when finish !!!
reason : flashing via SD card more..more..more faster than flashing with PC
cheers
indra9110
HyoImowano said:
Does anyone know why this is discouraged to begin with? Do any chefs have any insight into this?
Click to expand...
Click to collapse
With the UC (User Customization) support in ROMs now you need the SD card as it contains the customizations. I've flashed my phone more times than I can count and I have never removed either the sim or sd card.
I have NEVER removed sd or SIM whilst flashing, you literally CANNOT get interrupted during a flash process as your device is in SPL mode.
Leave them in, dont worry it will be fine.
There's at least one possible issue that you could run into flashing with an SD card in the slot, you might be booted up into winmo, start the flashing process, but have RAPHIMG.NBH or RAPHDIAG.NBH on your sd card, and the bootloader will stick there giving you a prompt to flash/boot that or continue..
that's stopped me in my tracks once or twice because I started flashing and didn't notice the prompt, so it didn't go anywhere and i had to start over.. but just a minor inconvenience

HD2 killed two of my 8GB MicroSD?

I have two 8GB Sandisk MicroSD card killed by my HD2 (i think so). Anybody faces the same prob? The cards are totally dead now after using it in my HD2 for a few days...
No such experience.
Good to know the Bland and model.
You mean brand?
Try to format it on your pc...
I had the same Isue.. could not format it on xp pc only on windows 7 pc..
mos of the time if you let you put it in your card reader and its recognized.. you just have to let it scan for errors and let it fix them..
Sometimes my cardreader fails to detecet my card. I don't think this is related to my HD2, atleast I don't hope so.
Not had it...yet...on my sandisk 8GB MicroSD. This is the one straight out of a Nokia 5800. The 2GB one which cam with my HD2 went tits up after I tried to import a playlist from WMP onto it. Seems I'm not alone with this issue either...
For the first time I can report a problem with my HTC HD2.
I also seem to have a problem with my 8Gb Scandisk card. It seems either my telephone or my laptop screwed the card up.
I have standard stock last rom available in Holland manilla 2.5 Rom 1.66. No special things installed.
The card works almost 100% except when I go to the tap music. Then hell breaks loose. The phone looks for the music files. But cannot find them and then suddenly the phone cannot recognize the card anymore? I have to restart the phone before it can recognize the card again. This only happens when I go to Music.
But the damage is done anyway. Cause when I insert card in laptop or computer. I can see the files but according to the computer there empty (which is not the case). I cannot copy or cut while in card is inserted in the computer.
I accepted this problem cause I have a good working TomTom on it which someone else installed for me. If I format the card I cannot put it back.
Try to format your card, I did this from my laptop (if it can reorganize it) and NOT chose FAST. Becouse if there is a problem with the card it will simply skip it. This is also a golden rule when you install new OS on a old or well used laptop.
Copy the tomtom folders to a folder on your PC before formatting, then copy back...done
I have a 8GB Sandisk card, I've had it on 3 plones now, using it for about 3 years, still works like a charm.
To the OP, maybe you got fake ones, Sandisk is the most counterfeit memory card brand, if you got them on ebay or so and not in a respectable street shop they might be fakes, for which that kind of failures are typical.
melkenglas said:
For the first time I can report a problem with my HTC HD2.
I also seem to have a problem with my 8Gb Scandisk card. It seems either my telephone or my laptop screwed the card up.
I have standard stock last rom available in Holland manilla 2.5 Rom 1.66. No special things installed.
The card works almost 100% except when I go to the tap music. Then hell breaks loose. The phone looks for the music files. But cannot find them and then suddenly the phone cannot recognize the card anymore? I have to restart the phone before it can recognize the card again. This only happens when I go to Music.
But the damage is done anyway. Cause when I insert card in laptop or computer. I can see the files but according to the computer there empty (which is not the case). I cannot copy or cut while in card is inserted in the computer.
I accepted this problem cause I have a good working TomTom on it which someone else installed for me. If I format the card I cannot put it back.
Click to expand...
Click to collapse
I have this problem, and I went back to HTC. I got a new phone replacement and everything is fine thereafter. =)
I had a problem with 3 different Kingston 8GB cards.
Statred working fine, but after writing more then 2GB to them, they suddenly died.
I tried all of them in the phone and in a card reader, and they acted the same way.
As a final test - I used a SanDisk card, and it works just fine from the time I got it.
So - maybe, you just have defective cards ?
Did you try formatting the cards in the phone and not in the PC ?
I have the same problem. If i put the files on my sd card from my pc there seem to be no problem. After I check these files on my phone, they are damaged or the folder is empty. So.. anyone has suggestions what to do?
Same experience here.
8Gb was working fine the first two days (the card that was included with my HD2)
Then, for no reason got a pop-up (invalid card type, do you want to format?)
At forst I said "no" and tried with my computer... None of the 6 software I used could save my card. Was definatly dead.
Put a second one in (1Gb, just to make sure), it's been a week, and I already get errors when I write. It's like the micro SD is on read only (though ther's no switch to set it back to "write mode")
One of the many (many many many) bugs of my HD2
i had the same problem. the 8gb SanDisk microsd card that originally comes with my htc hd 2 is now useless. lost a lot of pics, cab & songs. it can't even be read by card reader on my laptop. is this some kind of bug?? now im using another 8gb card & hope it wont happen again. im glad though that im not the only one having the problem
And i thought i was the only one. My 8GB only lasted for 1 day before it went died. Had to get a replacement from Service Center. The staff seem to handle it in a very fast manner (guess i am not the only one to get the SD card replaced recently!!)
My guess is i did a hard reset on the phone with the SD card in it. Anyone else did the same thing?
My card has been corrupted twice no the HD2 leading to:
1) Very poor performance
2) Very warm phone
3) Very fast draining battery
I believe it was due to the power saving features enabled to do with the microsd as someone else mentioned on this forum.
its a manufactures defect. something should be done. lots of users are getting this problem now,including me
maybe i know the answer..
sorry for my bad english..
I've the same problem. But searching from all forums, finally i get the answer. just find n download EASEUS Data Recovery Wizard Proffessional 4.3.6 (for 5 MB). Insert the mmc in card reader, use this software to recovery all the missing file (choose Complete Recovery Option). After recovery process done, use software LLFTool (for 600kb, just doing some browsing at google) to Low Level Format the mmc (this LLFTool can recognize the mmc). After all done, Windows can recognize again the mmc at windows explorer. Just right click and choose quick format (format FAT32). Done, you can use the mmc like the new one
bimo_nugroho said:
sorry for my bad english..
I've the same problem. But searching from all forums, finally i get the answer. just find n download EASEUS Data Recovery Wizard Proffessional 4.3.6 (for 5 MB). Insert the mmc in card reader, use this software to recovery all the missing file (choose Complete Recovery Option). After recovery process done, use software LLFTool (for 600kb, just doing some browsing at google) to Low Level Format the mmc (this LLFTool can recognize the mmc). After all done, Windows can recognize again the mmc at windows explorer. Just right click and choose quick format (format FAT32). Done, you can use the mmc like the new one
Click to expand...
Click to collapse
thanks for your help. i tried your solution but it doesn't work. neither the EASEUS Data Recovery Wizard Professional nor LLFTool detect the memory card. i think there's nothing to be done for the card. just hope htc will sort that out
I have also recently had an issue with my 8gb Sandisk Micro SD card.
It has been working fine for a while now, then yesterday when I went to pick up my phone, I noticed my S2U2 unlock screen was black instead of having my usual wallpaper there. My HD2 had just suddenly decided it can't recognise the card anymore and tells me I need to format it for it to be readable.
I pressed 'no' and tried to read the card on several computers as I wanted to transfer all data off before formatting it, but it would not read on any of them, nor would it work in my old N95.
I don't understand why this has happened, it has been working fine no probs, had about 3gb left on it still and have not recently installed anything on it - very annoyed as I have lost lots of recent photos of my 6month old boy which I cant get back now.
Have had to order a new card and hope this doesn't happen again, but not a happy bunny

[Q] Can I use my SDcard after Goldcard?

hello fellow hackers. Today i hacked my HD2 to install Android using a goldcard. Everything went well. No i have the problem that neither my Milstone, nor my HD2 or legend recognize the card. I have formated it a couple of times but no chance. I can use it on windows, and read and write but the cell phones doesnt recognize it. Is my SD card now corrupt? How can i remove the changes that were made?
obaidr said:
hello fellow hackers. Today i hacked my HD2 to install Android using a goldcard. Everything went well. No i have the problem that neither my Milstone, nor my HD2 or legend recognize the card. I have formated it a couple of times but no chance. I can use it on windows, and read and write but the cell phones doesnt recognize it. Is my SD card now corrupt? How can i remove the changes that were made?
Click to expand...
Click to collapse
Dude, why do you want to format it?
If I were you, I would rather buy a new one and keep the old one as an emergency kit
Still, you can try format it using a Partition Tools software.
Good luck
you shouldnt have needed to format it. it should work as a normal sd card when its gold, no problem. how else do you think you managed to copy the leoimg.nbh file onto it?
A card should work as a FAT disk, and still remain gold, until it is formatted (or you accidentally allow that annoying windows 'your disk may have errors' or whatever the hell it says popup to 'fix' it.)
Since you have gone past that stage by now, id say fix the mbr, fresh partition. Give some partitioning software a try, or you can use THIS (post 3) method to clean the mbr, see if it helps.
silverwind said:
Dude, why do you want to format it?
If I were you, I would rather buy a new one and keep the old one as an emergency kit
Still, you can try format it using a Partition Tools software.
Good luck
Click to expand...
Click to collapse
making the card took me maybe ten minutes. i can recreate it. anyways i was able to delete all the partitions with gparted and reformat the sd card with the phone it self. Thanks for the replies anyways.

[HELP] Not working external Micro SD card reader from atrix....

My micro SD card reader doesn't work at all not even recognize my MICRO SD card and none of them i have tried 4 micro sd card, from normal sd card to sdHC.. I have been using Gingerblur and the external SD card was not working properly then I flash back to 4.1.83 to get my Bootloader Unlock so in 4.1.83 the External SD card was not working at all.... I have tried a lot of memories, I tested them in a pc micro sd card reader and all was working properly in the PC but my atrix don't recognize any micro SD card that i put in... So now Im in recovery mode and i Need the E: Disk to flash a zip file for navalynt's mode I dont know what to do!
Exchange it. Had the same issue, only fix.
I've had this happen on my MyTouch 4g and my old G1. I think at some point rooting ends up corrupting the cards. I don't think this is an atrix problem. The only thing that worked for me was wiping and formatting the memory card again. Because it works in the computer you just make a backup. As far as being in recovery you just need to boot out of it that's not a big deal.
There is a known issue with the contacts in the sdcard slot in the Atrix. There is a fix which involves bending a pin slightly, but I would return the phone for exchange/repair rather than risk messing it up yourself. I would think this is your likely problem. You could try moving the sdcard around in the slot and putting a wee bit of pressure on it to see if it suddenly shows on your phone. This could possibly verify that the slot is the problem.
jhattenburg said:
Exchange it. Had the same issue, only fix.
Click to expand...
Click to collapse
I´m currently living in Ecuador south America I bought this phone on ebay, so it is a little difficult to me to exchange it, im trying to deal with the seller...
2leaponover1 said:
I've had this happen on my MyTouch 4g and my old G1. I think at some point rooting ends up corrupting the cards. I don't think this is an atrix problem. The only thing that worked for me was wiping and formatting the memory card again. Because it works in the computer you just make a backup. As far as being in recovery you just need to boot out of it that's not a big deal.
Click to expand...
Click to collapse
Maybe it is because the problem started strongly since I flash Gingerblur and when I flashed back to 4.1.83 and unlock the bootloader I noticed that it hasn´t been working when I was trying to see CWM 4 to flash Gingerblur again, im going to reformat my SD card but I think that this maybe it is not going to fix my problem.
CaelanT said:
There is a known issue with the contacts in the sdcard slot in the Atrix. There is a fix which involves bending a pin slightly, but I would return the phone for exchange/repair rather than risk messing it up yourself. I would think this is your likely problem. You could try moving the sdcard around in the slot and putting a wee bit of pressure on it to see if it suddenly shows on your phone. This could possibly verify that the slot is the problem.
Click to expand...
Click to collapse
Could you give intructions or a link to try to fix it, because the seller could refund me a portion of the money paid to fix it or I can return it because i already bought another one new but REFURBISHED, this phones have a lots of issues, wifi, fingerprint, etc... My samsung captivate never gave me such problems...
I took the sd card then put it again with pressure and without pressure, i tried but in anyway I have tried no respond was given from the atrix.. so it is not recognized at all...
CaelanT said:
There is a known issue with the contacts in the sdcard slot in the Atrix. There is a fix which involves bending a pin slightly, but I would return the phone for exchange/repair rather than risk messing it up yourself. I would think this is your likely problem. You could try moving the sdcard around in the slot and putting a wee bit of pressure on it to see if it suddenly shows on your phone. This could possibly verify that the slot is the problem.
Click to expand...
Click to collapse
before you guys go and return any phone unnecessarily, please swap out for another SD card as it may simply be that the SD card became corrupt with flashing a new ROM (as does happen), there is absolutely no reason to assume it is a hardware issue until you have attempted another SD card first, if another SD card does not work then yes get Motorola to fix it, otherwise, you will need a card reader to format your SD card to fat32 iirc
Why resurrect a 10 month old thread???? I think the OP has moved on by now.
Sent from my MB860 using xda premium
well since I found this thread through searching for a solution for my problem, I figured I should update with another solution in case others find the same thread through searching

Categories

Resources