Related
Hello,, how can i fix my htc with a dark screen?? i have tried too flash it. but that dosent work! what can help mee??
It works but it is almost impossible to see the screen??
If u flashed a new rom and the problem persists, it's probably some hardware issue and it needs repair, but, if u haven't done yet, try going to power management and set the backlight brightness adjustment to a fixed value instead of auto.
Elusivo said:
If u flashed a new rom and the problem persists, it's probably some hardware issue and it needs repair, but, if u haven't done yet, try going to power management and set the backlight brightness adjustment to a fixed value instead of auto.
Click to expand...
Click to collapse
i hav e tried too flash it and set the baklights brightness adjusments on manual but it stil dont works : o do u have any other tips??
Even I am facing the same issue. Did anybody get a fix to this solution.
After hard resetting the device, the screen has gone dark. I can see the phone working and also the menus, but since there is no backlight, its barely visible even inside the house. tried setting the backlight from Power adjustment menu, still no use.
Any help on this would be great.
Thanks
I had the same problem.I was taking a great care of my rose,I was overprotected with it,it was in perfect condition untill one day I wanted to sell it here and the next days the screen became dark for no reason.It really dissapointed me.I tried many things but nothing helped...it was 99% a hardware problem..I don't know what is wrong with these phones...anyway in the end I sold it on eBay..my suggestion is to try and replace the screen or just sell it...
I am not sure since when I have this. Seems like since I installed either the game Steambirds or since I started changing the screen density (which is now back to 240), using Font Changer or the non-market app: LCD Density Changer.
I tried wiping, new ROM, new kernell, but it won't be fixed.
The problem:
Along a big vertical area, the touchscreen thinks I am at the edges of that area. EDIT: Turns out that sometimes it works again, but mostly when it does, something else happens. The screen starts to think I press on random places, making him press buttons and stuff. Sometimes the screen doesn't even work, only the physical home button!
I'll try to illustrate using the following explanation of the problem (values are not correct, it's just about the idea):
along the x axis, 0 to 260 pixels work fine. When the pixels from 260 to 340 are pressed on the touchscreen, the phone thinks I am pressing at 260 AND at 340 (as if I am using 2 fingers). From 340 to the end of the screen it works fine again.
What do I have to do to fix this? And I flashed my phone a couple of times, will samsung still fix it if I send my phone (I feel like my screen is broken)?
Flash stock rom set custom rom counter to zero .
http://forum.xda-developers.com/showthread.php?t=1113928
JJEgan said:
Flash stock rom set custom rom counter to zero .
http://forum.xda-developers.com/showthread.php?t=1113928
Click to expand...
Click to collapse
How do I reset the counter? And isn't it weird that I got this problem? Or am I not the first one to have this with VillianROMs? I can hardly imagine that it is because I am not on stock rom. I'll try a stock ROM out soon. (Or did you simply answer the question about samsungs warranty?)
Added following information in my post: "Turns out that sometimes it works again, but mostly when it does, something else happens. The screen starts to think I press on random places, making him press buttons and stuff. Sometimes the screen doesn't even work, only the physical home button!"
O4web said:
How do I reset the counter?
Search its in dev section Binary Counter reset .
And isn't it weird that I got this problem? Or am I not the first one to have this with VillianROMs?
Working fine here possible bad flash .
I can hardly imagine that it is because I am not on stock rom. I'll try a stock ROM out soon. (Or did you simply answer the question about samsungs warranty?)
Both as in warranty and to clear a problem flash back to clean stock rom .
jje
Click to expand...
Click to collapse
Hi, i was delaying this topic but i can't help it, i need your expertise.
When i answer calls and get the phone close to the ear the phone constantly vibrates, like in 10 and 10 seconds. Even if i have an unread message or not ... How can i disable this thing ? My girlfriend hears the sound of the vibration from the other side of the call .. and annoys me too ...
xLoud feature never works ... or at least i think it doesn't, because when i select it at definitions -> sound and return to the sound menu it will be disabled again ...
When i'm on a call, i hear some interference like the sound of a television getting radio interference from a cell phone but in a microscopic way .. Not that this annoys me that much, but you know i like my stuff to be 100% pimped and fully working.
Thanks.
RayneRz said:
Hi, i was delaying this topic but i can't help it, i need your expertise.
When i answer calls and get the phone close to the ear the phone constantly vibrates, like in 10 and 10 seconds. Even if i have an unread message or not ... How can i disable this thing ? My girlfriend hears the sound of the vibration from the other side of the call .. and annoys me too ...
xLoud feature never works ... or at least i think it doesn't, because when i select it at definitions -> sound and return to the sound menu it will be disabled again ...
When i'm on a call, i hear some interference like the sound of a television getting radio interference from a cell phone but in a microscopic way .. Not that this annoys me that much, but you know i like my stuff to be 100% pimped and fully working.
Thanks.
Click to expand...
Click to collapse
i think it should be setted in setting open settings<cyanogenmod setting<sound<and there you found the setting that vibrate during calls so u disable that then u can be away from ur problem
or other wise open settings<call settings < there u can find the setting that to vibrate for every 45 sec option so disable that uthen you can be away from ur problem
and u can enjoy talking with ur gf
Sorry for the long time to respond, thanks that helped. What about the other problems ?
I'hav got another problem now, sometimes after charging, i turn on the phone and it freezes in sony ericsson logo, i have to remove the battery and turn it on again ....
So, someone have this types of bugs ?
thank you
Used pauls awesome rom v21 for a long time, didnt experience this problem though
How screens actually has a screen proximity sensor, when we move phone close to our ear during phonecall, it detects it and turns off the screen. When you pull it away the screen comes back on. This is for battery saving.
In your case if it vibrates every 10 seconds during a call i think it is uncommon, maybe u can try setting vibration off for notification sounds and see how that works? Like reddy suggested?
Could be a bad installation. But just a suggestion, i recently unlocked bootloader, installed nAa kernel and install pauls cyanogenmod 9 v2 rom and it works ultra smooth, i recommend you try it out. The nAa kernel should give u general improvements in the phone also
Hi,
Have you this requirements:
- Only 2.1.1.A.0.6 SE firmware
- Baseband: M76XX-TSNCJOLYM-53404015
If you have, try to make a full factory reset and wipe cache and see how it work's, if you have the same problems you should conciderer make a new reinstalation.
To the people of Turl's and Jokersax' CM9.
I have a touchscreen re-calibration app, I just tested it out and it seems to be working perfect. Don't hold me to it, but i think this is a pretty good temporary fix.
I'd love feedback, i didn't code this but after a few searches i was able to realize this is a universal fix for touchscreens that have been acting up.
Special thanks to gojimi. At least i hope.
Can you link the source please.
Cheers!
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
helmy96 said:
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
Click to expand...
Click to collapse
Sometimes, it will act up.
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
helmy96 said:
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
Click to expand...
Click to collapse
I know what you mean, sometimes homework takes away most of my time too. But just use CM9 as your daily driver, and you'll be well informed on any issues that will occur.
This actually screwed up my touchscreen..anyway to uninstall?
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
David Guillot said:
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
Click to expand...
Click to collapse
You are not the one who have this problem I had nottachtrix at first and touchscreen was working well when I instal MIUI 2.4.27 from there started my problem now my buttons sometime stop working when I bloc and then unblock phone buttons start working sometime it need restart phone I didn't try this ap yet but I think it's software because when buttons stop working my touchscreen is working full only buttons are not responsive is there some fix pleas PM me
After using nottachtrix arora installer to calibrate my touch would have random deadzones and w,e,s,z didnt work. Tried recalibrating with installer to only make it randomly worse or slightly better. This did the trick thoough. Thanks very much!!
help me
i was used gingermod rom and change to aokp milestone 6 suddenly yesterday seen that there are area in screen didnt work i have tryied to back to gingermod still not work try this software but also didnt work what i have to do please help me
hi help me
hi help me
i have one tablet eken w70 wiht the touch invsted help me
this touchRecelibrete not succes
help me
[email protected]
Can you please give us the correct way for Re calibration
Sent from my MB860 using xda app-developers app
i'll try it, my screen not responding now
I recently got a strange touchscreen issue.
When the device comes out of deep sleep (turn on the screen with power button) my touchscreen behaves weird. Normally, when I touch the unlock slider, it follows my finger. But not now....it's like long press is not recognized. I am able to unlock the screen by wiping my finger to unlock. But the slider is not following my finger. The strange thing is, after about 10 seconds, the issue is gone, and the slider follows my finger....
Also long press on the homescreen is not working during the first 10 seconds.
What I tried to solve:
I completely wiped the phone and reinstalled .42 firmware. Then updated tot ICS using Sony Update Service and also completely wiped my phone. The problem still there...then I flashed a custom ROM (shardur_seth spacious...and also his firmware) but the problem stille there.
Anyone else experienced this? Or any solutions I could try? It was there suddenly....could it be a hardware problem? But why is it gone after 10 seconds?
Thnx for your help
it happens for me sometimes, but most of the time when someone calling me i cannot at slide to answer. what im doing is i just press power button ones and it will silence and press the home key and it will work the slide key...
any solution for this also?
mavado said:
I recently got a strange touchscreen issue.
When the device comes out of deep sleep (turn on the screen with power button) my touchscreen behaves weird. Normally, when I touch the unlock slider, it follows my finger. But not now....it's like long press is not recognized. I am able to unlock the screen by wiping my finger to unlock. But the slider is not following my finger. The strange thing is, after about 10 seconds, the issue is gone, and the slider follows my finger....
Also long press on the homescreen is not working during the first 10 seconds.
What I tried to solve:
I completely wiped the phone and reinstalled .42 firmware. Then updated tot ICS using Sony Update Service and also completely wiped my phone. The problem still there...then I flashed a custom ROM (shardur_seth spacious...and also his firmware) but the problem stille there.
Anyone else experienced this? Or any solutions I could try? It was there suddenly....could it be a hardware problem? But why is it gone after 10 seconds?
Thnx for your help
Click to expand...
Click to collapse
i face the same problem
my phone is in service center for repair
see the video below and check if ur problem is the same
Sounds like your phone is just sluggish, you're probably running too much in the background/have too much installed on the phone and it takes a while for the RAM to optimally load everything you need again after having cleared some of it whilst the phone was in sleep mode.
SCHUMI_4EVER said:
Sounds like your phone is just sluggish, you're probably running too much in the background/have too much installed on the phone and it takes a while for the RAM to optimally load everything you need again after having cleared some of it whilst the phone was in sleep mode.
Click to expand...
Click to collapse
i repaired my phone via SEUS but the problem usa still there
went to service centre ,they downgraded it to Gb the problem was still there!!!!
dhwanik said:
i face the same problem
my phone is in service center for repair
see the video below and check if ur problem is the same
Click to expand...
Click to collapse
Yes, that's exactly the problem.....I also have the problem that I cannot longpress the home screen...U have the same issue? After 10 seconds or after tapping the screen multiple times, the issue is gone until the phone goes to sleep.
I too had this issue and narrowed it down to the sluggishness due to deep sleep.
What I did was,
1) Flash nightelf kernel
2) Installed Set CPU
3) Make profiles for Screen Off
4) Whenever I have the governor as "performance" I never had the issue
5) After lot of permutation combination, I fixed a screen off profile as 460max and 134 Min with conservative as governor.
6) Also added a new profile for "In Call" with "performance" governor.
The problem was gone. Yes, it happens once in a while but much better than the situation before.
mavado said:
Yes, that's exactly the problem.....I also have the problem that I cannot longpress the home screen...U have the same issue? After 10 seconds or after tapping the screen multiple times, the issue is gone until the phone goes to sleep.
Click to expand...
Click to collapse
yes i have the same issue we are not the only users who face this problem
there are many users who face this problem
arunsankar said:
I too had this issue and narrowed it down to the sluggishness due to deep sleep.
What I did was,
1) Flash nightelf kernel
2) Installed Set CPU
3) Make profiles for Screen Off
4) Whenever I have the governor as "performance" I never had the issue
5) After lot of permutation combination, I fixed a screen off profile as 460max and 134 Min with conservative as governor.
6) Also added a new profile for "In Call" with "performance" governor.
The problem was gone. Yes, it happens once in a while but much better than the situation before.
Click to expand...
Click to collapse
i am on locked boot-loader so can't flash kernel
arunsankar said:
I too had this issue and narrowed it down to the sluggishness due to deep sleep.
What I did was,
1) Flash nightelf kernel
2) Installed Set CPU
3) Make profiles for Screen Off
4) Whenever I have the governor as "performance" I never had the issue
5) After lot of permutation combination, I fixed a screen off profile as 460max and 134 Min with conservative as governor.
6) Also added a new profile for "In Call" with "performance" governor.
The problem was gone. Yes, it happens once in a while but much better than the situation before.
Click to expand...
Click to collapse
Tried using your settings..first I had governor set to performance...but the problem still persists. Wheneven I turn on the screen I have the issue. It is possible to unlock the screen if I wipe fast enough....but it really is strange...why is the issue gone after a couple of wipes or some touchscreen pressess..
Could it be a hardware error....a sensor not getting ready or something? But why is the problem gone when the screen is on for a while.....
mavado said:
Tried using your settings..first I had governor set to performance...but the problem still persists. Wheneven I turn on the screen I have the issue. It is possible to unlock the screen if I wipe fast enough....but it really is strange...why is the issue gone after a couple of wipes or some touchscreen pressess..
Could it be a hardware error....a sensor not getting ready or something? But why is the problem gone when the screen is on for a while.....
Click to expand...
Click to collapse
I have the same problem. Is there any solution?
Thank you for help.
same problem
Feri8850 said:
I have the same problem. Is there any solution?
Thank you for help.
Click to expand...
Click to collapse
me also having same problem and touch is awesome but when the lock is open then this problem will occur and it will open after 2 to 3 attempts..
what's this i think this is not an hardware problem this is only the software ??//??
i have the same problem too. i think there is a problem with cpu.
I had these sometimes with certain combinations of kernel and ROM. Actually it's gone... (Alliance V1/JJs Hybrid ROM 3.1)
I suppose it's a combination of hardware and software configuration...
Anyone tried to higher the minimum CPU speed?
Nachttier73 said:
I had these sometimes with certain combinations of kernel and ROM. Actually it's gone... (Alliance V1/JJs Hybrid ROM 3.1)
I suppose it's a combination of hardware and software configuration...
Anyone tried to higher the minimum CPU speed?
Click to expand...
Click to collapse
i tried. also i tried to set governor to different versions. and i tried nightelf rc5 kernel. nothing changed. problem still there.
today i realized that's not about only touchscreen. sometimes phone freezing.
problem with neo (mt15i) touch screen
use alliance night-elf v1.1 kernel.I had this problem but when I flash this kernel to my neo my touch screen works good same as the first day...
Well....for me suddenly the problem is solved!!!!
I'm very glad that my display is working again! It has been for about 3 months since I was facing the problem.
Unfortunately I do not have a clear solution to this, but I can explain what I did that day, and hopefully the solution is in there. But I can not garantee it.
What I did that day
1. I tried to get beats audio working, so I had installed a numerous of Beats libs. (see xda-developers for some of those libs). The last one I tried was Walkman port by ThilinaC. Not sure how this can be related to the display issue
2. I flashed a new rom. But this time I formatted /system and /data in CWM. Normally I just did a factory reset and installed the new rom. (but guess factory reset also formats /system and /data)
Still....guess this has nothing to do with the display
3. I did a offline charge. When my phone was empty I wanted to charge it fast. So I switched off my phone, and then connected the charger to offline charge the phone.
Really not sure how the above points could be a solution to de display failure, but guess if it was the digitizer that was the problem, it's strange that it is fixed out of knowhere....but the above actions are what I did that day....so maybe it's helpful and is the solution in there...maybe.
I'm glad the problem is gone
Yes, I am facing this exact problem, I am going to take my mobile to the service center !!!.