[Q] Leo sense home tab weather animation always on? - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi,
Usually the weather animation on sense home tab stops in few seconds, if there any way/tweak to keep it always on.
PS- Before asking this question here, I searched everything but found nothing. Please forgive me if this question has been asked earlier.
Thanks

I can understand that this still nobody has asked. For me it makes no 'sense' if the animation is repeated permanently.
The view of the home tab is limited and the animation may needed a lot of CPU performance (battery drain).
However, it is likely that you can completely switch off the animation...

ElectronX said:
I can understand that this still nobody has asked. For me it makes no 'sense' if the animation is repeated permanently.
The view of the home tab is limited and the animation may needed a lot of CPU performance (battery drain).
However, it is likely that you can completely switch off the animation...
Click to expand...
Click to collapse
Well, it depends on ones personal taste, few people like it to be always on, including me.
I know it will drain battery, but Android live wall also consume a lot battery and people still use it.
Disabling animation is already discribed here, what I am looking is enabling it permanently.
Thanks.

Related

Display problems with NAND GBX0* + kernel 3.4.17

This ROM is working very well on my UK Rhod 100. Very stable & fast and since the latest update I have the correct HW keyboard layout. Battery life is limited but carrying a second battery is an easy solution.
The previous problems where the screen would not turn on after several pushes of the power button almost never occurs. However when the battery runs down to about 30% the screen always changes such that a red overlay occurs visible mainly on screens with a white background (see pics). Also when the screen changes ghost images remain from previous screens. Also at this point sometimes the screen will not turn on despite repeated use of the power button. Strangley, even though there is nothing visible on the screen I can unlock the phone by swiping in the expected area (and get haptic feedback) and long press the power button and turn off the device by pressing in the expected areas. Upon a reboot the screen will initially be back to normal but then if the battery is below 30% the problem will return. These issues never occur if the battery is above 30%. If I take screenshots with shootme the pics captured look normal when viewed after a reboot before the problem recurs. Not sure what the system does when the battery falls to this level but the screen is definitely affected. This problem also occurs with a fresh install with no apps installed.
If anyone has any ideas as to what could be the cause (and even better a solution) it would be most welcome. Thanks to all those behind this project.
Sorry you are having troubles. Unfortunately as noted in the first post for that thread we only have RHOD400s to test with. No one else has reported any similar issues. The 100s are known to be the problem children of the RHOD family. If you come up with a fix let us know, and we will try to include it in any future releases.
wizardknight said:
Sorry you are having troubles. Unfortunately as noted in the first post for that thread we only have RHOD400s to test with. No one else has reported any similar issues. The 100s are known to be the problem children of the RHOD family. If you come up with a fix let us know, and we will try to include it in any future releases.
Click to expand...
Click to collapse
Did you look at ACL's work on RE'ing that panel code...?
He said something about the panel power up/power down sequence on the 100's (the AUO panel specifically) to be quite a bit different.
arrrghhh said:
Did you look at ACL's work on RE'ing that panel code...?
He said something about the panel power up/power down sequence on the 100's (the AUO panel specifically) to be quite a bit different.
Click to expand...
Click to collapse
arrrghhh, I noted your post in the ROM development thread regarding the start up sequence in the OMGB kernel for the AUO panel. Perhaps this would solve my issue as well. If this change could be added to the next edition of this ROM my device would be virtually bug free.
As noted in the thread, we do not have any RHOD100s to test with. It is very unlikely that this will happen. If you would like to make your own kernel with these changes I can post it.
issue or not?
hi,
thanks a lot, first of all.
I've been trying to figure out how to get an Italian keyboard layout.
any suggestion?
-p.
paolora999 said:
hi,
thanks a lot, first of all.
I've been trying to figure out how to get an Italian keyboard layout.
any suggestion?
-p.
Click to expand...
Click to collapse
try using AItype Keyboard Plus which supports multiple languages ​​and keyboard layouts
Sorry I didn't express myself properly. I meant the physical keyboard. In other thread I read something about a startup.txt file, I don't know if it applies to this ROM (and moreover I can't find it).
paolora999 said:
Sorry I didn't express myself properly. I meant the physical keyboard. In other thread I read something about a startup.txt file, I don't know if it applies to this ROM (and moreover I can't find it).
Click to expand...
Click to collapse
startup.txt files are only for the SD card versions of the android roms.
You would need to edit the keyboard map. Here is generic android keyboard map info.
There may be apps out there than can change your keyboard map, but I don't know any details about that.
Also in the future it would be best to start your own thread, rather than using an unrelated one. Better yet, post the questions about the rom you are working with in the thread for that rom.
i am having also a screen problem with that Rom and Kernel:
My screen is not calibrated. When i press it's being pressed on somewhere else on the screen.
P.S.
My RAM is not 100 +- this rom showing me 33 for usage on the device :S.
Can someone help me with those two ?
MTN_Cool said:
i am having also a screen problem with that Rom and Kernel:
My screen is not calibrated. When i press it's being pressed on somewhere else on the screen.
P.S.
My RAM is not 100 +- this rom showing me 33 for usage on the device :S.
Can someone help me with those two ?
Click to expand...
Click to collapse
Did you read the link that covered screen calibration listed under related goodies, or did you search for the threads that cover screen calibration under android? Tell us what you have tried, but didn't work.
No idea what you mean by the ram is not 100.
What the heck is going on here? Is this just the thread to jack?
Let's focus on the display issues please folks, as in your response should be related to the original post.
arrrghhh said:
What the heck is going on here? Is this just the thread to jack?
Let's focus on the display issues please folks, as in your response should be related to the original post.
Click to expand...
Click to collapse
idc if they will move my question the the original one...
but i can't fix my calebration points...every time i need to launch the HTC program :\
Problem resolved?
akk29 said:
This ROM is working very well on my UK Rhod 100. Very stable & fast and since the latest update I have the correct HW keyboard layout. Battery life is limited but carrying a second battery is an easy solution.
The previous problems where the screen would not turn on after several pushes of the power button almost never occurs. However when the battery runs down to about 30% the screen always changes such that a red overlay occurs visible mainly on screens with a white background (see pics). Also when the screen changes ghost images remain from previous screens. Also at this point sometimes the screen will not turn on despite repeated use of the power button. Strangley, even though there is nothing visible on the screen I can unlock the phone by swiping in the expected area (and get haptic feedback) and long press the power button and turn off the device by pressing in the expected areas. Upon a reboot the screen will initially be back to normal but then if the battery is below 30% the problem will return. These issues never occur if the battery is above 30%. If I take screenshots with shootme the pics captured look normal when viewed after a reboot before the problem recurs. Not sure what the system does when the battery falls to this level but the screen is definitely affected. This problem also occurs with a fresh install with no apps installed.
If anyone has any ideas as to what could be the cause (and even better a solution) it would be most welcome. Thanks to all those behind this project.
Click to expand...
Click to collapse
In an attempt to bring this thread back on topic I thought I'd report back that the original problem has not happened for a few weeks. My setup is essentially unchanged, the only change is that I have been using One Power Guard to try and improve battery life, which by the way seems to be effective. Managed 13hours with light use (few calls/occassional data for email web browsing)
Anyway it could be coincidence but it is possible that one of the tweaks performed by the app has sorted this issue. Since nobody else has reported the same problem I'm not sure how useful this info is but hopefully it may be of use to someone.

(Verizon GS4) Rooted 4.3 Serious lock screen/home screen lag

I am currently running rooted MJ7 (Verizon Galaxy S4) and have window animation scale, transition animation scale, and animation duration scale all turned off in developer options. I hoped that this would reduce screen and lock screen lag, however, I am getting pretty pissed about waking my phone and have to wait for 10-15 seconds for any touch response. This happens about once or twice an hour. It also occurs every so often once the screen unlocks and I will wait 10-15 seconds for anything but the wallpaper to load... I have hard reset multiple times hoping to clear the issue. I use zero widgets to avoid load time (however the hardware in this phone should be able to handle pretty damn much anything), and I manually clear cache and kill apps regularly....Nothing has helped... Any ideas or anyone else experiencing this?
Jsyme222 said:
I am currently running rooted MJ7 (Verizon Galaxy S4) and have window animation scale, transition animation scale, and animation duration scale all turned off in developer options. I hoped that this would reduce screen and lock screen lag, however, I am getting pretty pissed about waking my phone and have to wait for 10-15 seconds for any touch response. This happens about once or twice an hour. It also occurs every so often once the screen unlocks and I will wait 10-15 seconds for anything but the wallpaper to load... I have hard reset multiple times hoping to clear the issue. I use zero widgets to avoid load time (however the hardware in this phone should be able to handle pretty damn much anything), and I manually clear cache and kill apps regularly....Nothing has helped... Any ideas or anyone else experiencing this?
Click to expand...
Click to collapse
Do you have lock screen effects turned off (light and water)? Turning those off really helped with the stutter I used to get when unlocking. It wasn't nearly as bad as what you're describing though... are you running any performance tweaks? Any 3rd party apps that change system behavior? I would freeze any non-stock apps and mods for a day and see if you still get it.
Crawshayi said:
Do you have lock screen effects turned off (light and water)? Turning those off really helped with the stutter I used to get when unlocking. It wasn't nearly as bad as what you're describing though... are you running any performance tweaks? Any 3rd party apps that change system behavior? I would freeze any non-stock apps and mods for a day and see if you still get it.
Click to expand...
Click to collapse
Haha, I actually feel quite noob at this point. Immediately after creating this post I went through my running applications in rom toolbox and noticed one little thing... There was a system cleanup tool running a total clean at every system lock, thus killing all running/background apps. The lag was simply the phone restarting the necessary applications... After eliminating this procedure I no longer experience the severity of lag. Whoops.
Sent from my SCH-I545 using xda premium

Pixelation and slow drawing on lockscreen only!

I have a minor niggle but wonder if it's due to something I'm doing wrong. I have full backup's of my TA partition and flash custom and stock rom's as and when I choose. I just have an annoying issue when i turn my screen back on it shows garbage pixels on the screen and slowly draws the screen til the bottom and then flashes to a properly drawn screen. Can I remove it or learn to live with it?
srdempster said:
I have a minor niggle but wonder if it's due to something I'm doing wrong. I have full backup's of my TA partition and flash custom and stock rom's as and when I choose. I just have an annoying issue when i turn my screen back on it shows garbage pixels on the screen and slowly draws the screen til the bottom and then flashes to a properly drawn screen. Can I remove it or learn to live with it?
Click to expand...
Click to collapse
My test device - that I picked up very cheep as it had been dropped and the SIM reader no longer works - displays the same issue, I had always assumed it was because of the fall it had.
Sorry if that doesn't help you
like this?
http://youtu.be/oyv5QmD5uQA
Exactly the same issue thanks
Same here but my phone is allways in case and i never dropped it. Oh and factory reset or flashing another ROM is not solution.
Any ideas?
I can only guess that either the RAM fills up with the screen off and once it starts to clear when the power button is pressed it suddenly can draw faster, or it's because the CPU and GPU clock down and slowly ramp up on wake. I'll change my performance settings see if that changes things?!
I've changed the settings in performance. So goto settings, performance, profile and select performance instead of balanced or power save. This seems to have sorted the re-draw issue on the lockscreen, any change I'll let you know. Now I just need to get a basic knowledge coding/cooking rom's and start delving further into android!!
srdempster said:
I've changed the settings in performance. So goto settings, performance, profile and select performance instead of balanced or power save. This seems to have sorted the re-draw issue on the lockscreen, any change I'll let you know. Now I just need to get a basic knowledge coding/cooking rom's and start delving further into android!!
Click to expand...
Click to collapse
So it's actually software problem right? Not damaged screen or something inside the phone.
Jecmenn said:
So it's actually software problem right? Not damaged screen or something inside the phone.
Click to expand...
Click to collapse
seems that way i now get it one in ten times I press the power button otherwise it just instantly appears with no redraw, just seems like lag
srdempster said:
seems that way i now get it one in ten times I press the power button otherwise it just instantly appears with no redraw, just seems like lag
Click to expand...
Click to collapse
mine is a hardware issue. you will see that it is currently on cm12 but it has done that on Stock, 4.4.x custom and 5.0 CM/AOSP as well. It will only do this if it hasn't be used for a few hours.

[Q] Constant disconnects, BT not working

For some reason, after rooting and flashing CM12, I'm constantly loosing cell coverage and I can't get bluetooth devices to pair with my phone. Seems like the battery is dying WAY too fast too. I'm talking literally just 4-6 hours from 100% to dead. Anyone experience this? I also have the no sim inserted thing, but from what I read that's not a big deal. Anyone experience this?
It maybe a bug you may want to ask about on the rom thread you may get the proper help. I know that the bluetooth can be a unstable. The battery could have to do with a couple of things like try changing your wallpaper to something darker. Also try this app it will prevent apps from running in the background. Here is the link:https://play.google.com/store/apps/details?id=com.oasisfeng.greenify see with our phone it also has a high resolution screen. This can cause the phone to die really fast you may also want to know that when apps try to update them selves or refresh there data they use up a lot of power.
This may help a lot it does for me:
Go into settings and enable develper options (tap on "build number" a couple of times)
Then go back and go into developer options and scroll down and disable the following things:
*Window animation scale
*Animator duration scale
Then lower this one down to .5x:
*Transmation animation scale
This edits in the settings will also make the phone a whole lot faster because it isn't using so much ram on anamtion. This will also save power because it not using so much ram, lets me/us know if this works/helps.

Lollipop on ZU- what am I missing?

Got the OTA update to L on my 6833. Yes, it has made the already smooth animation slightly smoother but otherwise what is there? The power widgets are gone, I had to install third party Power Toggles app. The new notification swipe down is annoying, having to swipe up when waking device is annoying. The status bar colors are inconsistent. The menus look childish looking.
Without being dramatic, did Sony take all this time to make sure it ran without crashing? Because I notice very few changes (not even improvements, just any changes) on the UI. I must be missing something.
more than that:
can only set one volume at a time.
either portrait or auto, you can't force landscape like in KK.
animations are fluid, but the functionality isn't. My opinion is, if the device has extra power that it can use to make things animate, slide and fade all over the place, better to put that extra power into making the device perform faster. Anyone here who prefers prettier animations instead of faster functionality?
low resolution screenshots in the recents screen. wat. Seriously... wat? Also, the way they've made it it is faster to just go to the apps screen and open whatever app i want, instead of waiting for the recents screen to load and then scroll awkwardly through the programs... Also, you can only see three recent apps. On a device with 6" of screen. three. think about it.
Also... what is the point of having screenshots, anyway? icons are faster, easier to distinguish, take fewer resources and smaller area on screen.
I agree fully on the recent apps screenshots. The blurry images are embarrassing and don't at all go with the clean/sharp theme of everything else. I don't understand why they've made it low res, can't be for performance given no restraint or need anywhere else. Bizarre!
There is over-prettying. For example, the stupid screen swipe up to unlock (after hitting the power button already), the sparkles are just so unnecessary, it is one of the few places the phone actually seems to struggle pulling off the effect.
At the moment my biggest problem is with Yahoo Mail. The account does not seem to auto-sync despite all the settings being correct and even when I force the sync manually the notifications don't show. I've uninstalled and reinstalled, most likely Yahoo to blame, their webmail is always breaking but never ever had a single issue before with KK. This is problematic because it is effectively no longer push email, I have to manually check 50 times a day.
My biggest annoyance is the inability to reclaim the Google search bar area in the Home Screen. I don't want that search button, why can't I use that space, and why a stupid dot to represent the pages of the Homescreen when I only have 1.
Is there actually anything different/new on the backend? My issues aren't severe enough to go back to KK (yet) but seeing what I see, I would have no problem whatsoever buying an Xperia Sony will not upgrade beyond KK.
jess91 said:
Got the OTA update to L on my 6833. Yes, it has made the already smooth animation slightly smoother but otherwise what is there? The power widgets are gone, I had to install third party Power Toggles app. The new notification swipe down is annoying, having to swipe up when waking device is annoying. The status bar colors are inconsistent. The menus look childish looking.
Without being dramatic, did Sony take all this time to make sure it ran without crashing? Because I notice very few changes (not even improvements, just any changes) on the UI. I must be missing something.
Click to expand...
Click to collapse
I agree with you about small changes. I even face some strange problems in my WiFi. the mac address haven't change, but I can't connect to my work WiFi protected network. Sometimes it connects in limited status. One of my friends which updated his Ultra has this problem too.I could connect it to my laptop adhoc wifi netwrok, but for one time. it even can't connect to that network anymore. I rolled back to my stock 14.4.A.0.133 backup. and a'm waiting to fixes from sony.
Agree with you guys. And that stock greenish blueish greyish statusbar color pisses me off! Anybody knows how to change that color?
Quite pathetic attempt by a mod to bury this thread by moving it to this section. If negative feedback on L bothers you so much, delete the thread and censor it outright. Sad day for xda.

Categories

Resources