I have recently updated my hp dv 9000 to win7ultimate and have been priviosly flashing multiple phones from it. My sis in law comes over today, i have everything ready to flash and knock her phone out, she gets here, plug the eris in and win7 appears to be missing a driver that i cant find. searched for an hour. has anyone else had this problem? can you recommend a driver? It wont read my evo either
stkiswr said:
I have recently updated my hp dv 9000 to win7ultimate and have been priviosly flashing multiple phones from it. My sis in law comes over today, i have everything ready to flash and knock her phone out, she gets here, plug the eris in and win7 appears to be missing a driver that i cant find. searched for an hour. has anyone else had this problem? can you recommend a driver? It wont read my evo either
Click to expand...
Click to collapse
Try HTC Sync: http://www.htc.com/us/support/droid-eris-verizon/downloads/
Its been a while since I've had to use this, but its supposed to have the proper USB drivers that you'll need.
If this doesn't work, shoot me an email at [email protected] and I'll send you a collection of USB drivers I've gathered-up over the past year or so and you can see if these might help.
Cheers!
I was going to dl sync but unrevoked mentioned not too have it installed. Only reason i didn't is I just want to root and install a rom
stkiswr said:
I was going to dl sync but unrevoked mentioned not too have it installed. Only reason i didn't is I just want to root and install a rom
Click to expand...
Click to collapse
Don't know much about unrevoked, but lots of folks have used jcase's 1-click app: http://forum.xda-developers.com/showthread.php?t=742228
Then, you can simply download your ROMs directly to your phone without needing to use your PC at all.
Good luck!
stkiswr said:
I have recently updated my hp dv 9000 to win7ultimate and have been priviosly flashing multiple phones from it. My sis in law comes over today, i have everything ready to flash and knock her phone out, she gets here, plug the eris in and win7 appears to be missing a driver that i cant find. searched for an hour. has anyone else had this problem? can you recommend a driver? It wont read my evo either
Click to expand...
Click to collapse
Download PDAnet for Android, it will install every driver needed for your Eris. I'm running windows 7 ultimate right now and it has recognized my phone every single time !
Sweet thanks
stkiswr said:
Sweet thanks
Click to expand...
Click to collapse
Reply back and let me know if it worked.
Worked great! Flashed her a new rom, tazz ginger 6 and its running @ 806 w interactive gov and siedio 3500
stkiswr said:
Worked great! Flashed her a new rom, tazz ginger 6 and its running @ 806 w interactive gov and siedio 3500
Click to expand...
Click to collapse
Watch that overclock lol, don't turn that Eris into a melted pile of plastic and metal hahaha. Glad it worked for ya though ! I can't overclock mine past 748 without it freezing up lol.
Cool, I didnt go higher than 806 but used it for 2 hours like that, no temp issues, dropped to 768 but still fine. Thanks for your help.
stkiswr said:
Cool, I didnt go higher than 806 but used it for 2 hours like that, no temp issues, dropped to 768 but still fine. Thanks for your help.
Click to expand...
Click to collapse
No problem man, glad I could.
Downloading pda.net and using its drivers worked great. Now phone is being recognized. Great workaround for people such as myself!
Sent from my warm EVO
stkiswr said:
Downloading pda.net and using its drivers worked great. Now phone is being recognized. Great workaround for people such as myself!
Sent from my warm EVO
Click to expand...
Click to collapse
Yeah I ran into this problem while trying to install HTC Sync. For some reason the drivers with HTC Sync wouldn't work right on my windows 7 and the internet on my laptop was shot so I figured I could download PDAnet to use the internet on my laptop. Low and behold when I plugged my phone into my laptop after installing PDAnet, it finally recognized my phone !!!! Yeah but anyway, glad it worked for ya, there's actually quite a large amount of people don't know this works.
Related
Eugene has produced a new ROM. I didn't format the title because it is not my ROM to post, but I wanted to share the link for people in the meantime.
Hero To Slide Beta:
http://forum.androidspin.com/showthread.php?p=14095#post14095
Keyboard lights work
You should still format the title properly, just give credit to Eugene...
WHEN DID THIS HAPPEN?!? how the heck did i miss this lol i peruse the forums a ton i figured i'd see somethign like this haha
kingofyo1 said:
WHEN DID THIS HAPPEN?!? how the heck did i miss this lol i peruse the forums a ton i figured i'd see somethign like this haha
Click to expand...
Click to collapse
He posted it late last night on twitter
Has anyone flashed this rom? I'm not too interested in ports on my Slide, but I'd like to hear the thoughts of people who have installed this.
Personally, I'm sticking with SlideM until CM5/6 arrives for the Slide.
i flashed it.....It stalls,big time for me...and before anyone goes"did you wipe(lol)" yes I did...ohh and did the mount system to but to no avail still stalls and freezes!
But it is fast but just freezes too much...went back to slide m
on another note, which do you guys like better SlideM or the Legend rom?
Did you run your log cat to see that it was indeed frozen
Remember Custom ROMS can take up to 15 minutes to flash in some cases, although on this phone I dont think it will ever be that high.
I thought mine was frozen but it turned out it just needed 7 minutes or so to load.
The logcat looked plenty busy
Thanks to kingofyo1 for teaching me how to check if the phone actually is frozen
anyways ill be sticking to the SLIDEM rom till someone builds a good kernal to overclock or a froyo rom or CM rom.
Mine kept freezing too .. But I didn't check my logcat..
Been loving legend... Except for no genius button...
Sent from my T-Mobile myTouch 3G Slide using XDA App
well i flashed it, and im at work, so cant logcat.. and i tried installing setcpu, because the kernel looked slightly different, i was thinking he may have implemented the OC kernel(hopes and dreams ) and i got a lock. restarted and then tried setcpu again, and locks still there >.< so i am guessing either superuser is messed up or something, will try a different root program and see if possibly its the program or the superuser.. overall its a good looking rom, check back on my slide bible for my scores if interested
I just clocked it. 3 minutes 14 seconds
After about 51 seconds you will get the little heropetit image. than an HTC for the remaining time.
Just relax and go away from the phone for a few minutes. I also filmed this.
So yea....i used it like i said...and im already back on using SlideM
BTW i changed a tire while this was loading and was still stuck after multiple boots.
OMFG 3.8 LINPACK!!! and second time is 3.3, 3rd is 3.5 4th is 4!!! 5th -8 is 4.1
can you say quickest slide rom to date??
kingofyo1 said:
OMFG 3.8 LINPACK!!! and second time is 3.3, 3rd is 3.5 4th is 4!!! 5th -8 is 4.1
can you say quickest slide rom to date??
Click to expand...
Click to collapse
Any luck with SetCPU?
HebrewToYou said:
Any luck with SetCPU?
Click to expand...
Click to collapse
working on it... no such luck yet, i'll post if i can get it working :/
newest ver of setcpu makes device unresponsive >.< never get a su request either on it >.>
Eugene has been working on a kernal to let us overclock. I saw some pics from him posted some where last night.
the superuser.apk is out of whack.. replacing it now and we will see what happens guys. wish me luck? lol
EDIT: cant seem to drop the stock su, dont have adb at this time with me so i cant do it that way either.. anyone else having troubles with su perms?
Tried it again and it boots.....but then just freezes.....i tried to uninstall superuser and wouldnt but installed setcpu.apk and opened her up and now my phone is stuck/frozen/locked up.....
Will be staying on SlideM till these issues are resolved
my biggest issue is the trackpad is messed up,
up=right
down=left
left=up
right=down
there are also some graphical issues that aren't incredibly bothersome, but stuff is just a little offcenter in landscape
if someone is a member of the community where eugene's original post is hosted, would you mind copying the images he attached over here?
I just read that a GingerBread ROM was leaked to the Galaxy S 4G. I also know that the Vibrant has slightly different GPS hardware than the other Galaxy S series phones, which is why Captivate ROMs had functional GPS long before the Vibrant.
However, if the Galaxy S 4G has the same GPS as the Vibrant, this could save the developers a lot of time and headache if they just rip off the drivers and lib files from this new leaked ROM. See this link: http://forum.xda-developers.com/showthread.php?t=1125747
Have you been asleep the last couple of days? Those files were already pulled and are working on gingerbread jvp ports.
Sent from my GT-I9000 using XDA Premium App
explodingboy70 said:
Have you been asleep the last couple of days? Those files were already pulled and are working on gingerbread jvp ports.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yep. It will be soon when GPS will work on 2.3 base.
I haven't been asleep, I just didn't realize that the GPS fix they were working on came from the Galaxy S 4G leak. I just found out about that leak today, and figured I'd try and make someones' life easier. I go through the Gingerbread ROMs every couple of days to check their progress, because as much as I want Gingerbread and working Netflix, I can't lose my GPS. Thanks for answering!
alright Thanks guys.
netflix does work already and its on the market
New_Guy777 said:
I haven't been asleep, I just didn't realize that the GPS fix they were working on came from the Galaxy S 4G leak. I just found out about that leak today, and figured I'd try and make someones' life easier. I go through the Gingerbread ROMs every couple of days to check their progress, because as much as I want Gingerbread and working Netflix, I can't lose my GPS. Thanks for answering!
Click to expand...
Click to collapse
I have been on Gingerbread Blitzkreig for 3 days now. Did the GPS fix and gettin quick lock. I am very pleased with this Rom
http://forum.xda-developers.com/showthread.php?t=1121862
Problem with Stepping Back...
lapdog101 said:
I have been on Gingerbread Blitzkreig for 3 days now. Did the GPS fix and gettin quick lock. I am very pleased with this Rom
http://forum.xda-developers.com/showthread.php?t=1121862
Click to expand...
Click to collapse
I, too, went with the Gingerbread Blitzkrieg today. Had to do the full smash since I was coming from a 2.2 ROM. Unfortunately, it seems to have killed my entire ability to do ADB. USB Debugging is activated, but plugging it into my computer doesn't allow me to "see" my phone, despite multiple reboots of both devices.
So far, everything is fine, but it keeps me from being able to use either ODIN or HEIMDALL.
I feel really vulnerable without these safety nets. I'd love to try again by flashing my Backup Restore in CWM, but I can't find anything that says whether or not that's safe when you have GB bootloaders and a GB Kernel...
*sigh* More Research.
Are you sure your computer can't see the phone when its in download mode? I would give it a shot.
Also a nandroid restore should work fine, but you'll have to flash a froyo kernel before or after the restore.
Got it...
mattb3 said:
Are you sure your computer can't see the phone when its in download mode? I would give it a shot.
Also a nandroid restore should work fine, but you'll have to flash a froyo kernel before or after the restore.
Click to expand...
Click to collapse
Yes, it wouldn't see it at all. Finally got it to work after about the 10 reboot. My computer finally did the whole installing Samsung Device Drivers (as if it hadn't done that 50 times). Probably just my computer, which is not entirely what I wish for...
Anyway, I'm going back because I need to have control of my camera, even at the end of the battery. I use it for tutoring, and I need to know I can use it until the very end.
Something will be worked out soon, though, I'm sure.
Thanks for the responses and the care, guys. You're all that makes XDA such a wonderful resource.
New_Guy777 said:
Yes, it wouldn't see it at all. Finally got it to work after about the 10 reboot. My computer finally did the whole installing Samsung Device Drivers (as if it hadn't done that 50 times). Probably just my computer, which is not entirely what I wish for...
Anyway, I'm going back because I need to have control of my camera, even at the end of the battery. I use it for tutoring, and I need to know I can use it until the very end.
Something will be worked out soon, though, I'm sure.
Thanks for the responses and the care, guys. You're all that makes XDA such a wonderful resource.
Click to expand...
Click to collapse
Had the same happen to me. Unplug, disable USB debugging, enable, plug back in. Voila.
Also, update 2 includes a hacked cam that will work below 15%
Hey all, Android + Thunderbolt + XDA Noob in the house (nice video)
I tried to download perfect storm and then gingeritis, only to see that anything linked through themilk.com seems to have gone down! Been down since last night.
I'm rooted, backed up, using clockwock, looking for a stable Rom. Have tried GB debloated and froyo debloated, was more impressed with froyo due to the lack of bugginess. In GB for example, I could not mount the SD card into windows because , apparently, it required different drivers which i was not able to find. Perfect storm caught my eye as a very efficient Froyo that is compatible with MR2 (which i upgraded, because i wanted the option to switch to CDMA only when im at work, which is literally 30 meters out of 4g range) .
But.. everyone is telling me to go with gingivitis because it is a polished GB. If i can mount my drive properly on GB that would be cool... i also noticed GB stock was simply not as smooth... though people claim OCing the processor to 1.4 helps that. Being a PC overclocker i worry about the extra voltage and heat that might result, but to be honest ive done no Thunderbolt overclock research yet.
So...the question is you need the drivers? I'm still on froyo and cm7 so I'm not much of a help here.
Sent from my ADR6400L using XDA Premium App
anotherfiz said:
Hey all, Android + Thunderbolt + XDA Noob in the house (nice video)
I tried to download perfect storm and then gingeritis, only to see that anything linked through themilk.com seems to have gone down! Been down since last night.
I'm rooted, backed up, using clockwock, looking for a stable Rom. Have tried GB debloated and froyo debloated, was more impressed with froyo due to the lack of bugginess. In GB for example, I could not mount the SD card into windows because , apparently, it required different drivers which i was not able to find. Perfect storm caught my eye as a very efficient Froyo that is compatible with MR2 (which i upgraded, because i wanted the option to switch to CDMA only when im at work, which is literally 30 meters out of 4g range) .
But.. everyone is telling me to go with gingivitis because it is a polished GB. If i can mount my drive properly on GB that would be cool... i also noticed GB stock was simply not as smooth... though people claim OCing the processor to 1.4 helps that. Being a PC overclocker i worry about the extra voltage and heat that might result, but to be honest ive done no Thunderbolt overclock research yet.
Click to expand...
Click to collapse
It doesn't require different drivers, when you plug it in and can choose "charge only/disk drive/internet pass through" select pass through, wait about 5-10 seconds, then choose disk drive mode.
I was also wondering if people had Perfect storm 1.5 and gingivitis 1.0 mirrored somewhere.
anotherfiz said:
I was also wondering if people had Perfect storm 1.5 mirrored somewhere.
Click to expand...
Click to collapse
This....tried downloading it at themikmik and it seems the link is dead. "skip ad" no worky.
g00s3y said:
It doesn't require different drivers, when you plug it in and can choose "charge only/disk drive/internet pass through" select pass through, wait about 5-10 seconds, then choose disk drive mode.
Click to expand...
Click to collapse
No need for anybody that anymore.. In IMO's Lean Kernel thread you cm download the new USB.apk.
Flash in clockwirk and mount away with the lucky dance.
Sent from my ADR6400L using XDA App
Anyone got a download link to Perfect Storm 1.5?
anotherfiz said:
Anyone got a download link to Perfect Storm 1.5?
Click to expand...
Click to collapse
No, we are not allowed to mirror a developer's roms without their permission. I'm sure chingy knows and he'll fix it ASAP
weibo.com/chomper
t.cn/aDdv3E
Getting closer...
Looks okay , But was hoping for more a Honeycomb GUI , as ive just got rid of a 2.3 Tablet to get the HP touch pad to flash to 3.0 but will 3.0 ever happen for the Touch pad ?
The general consensus seems to be that HC will not appear on the TP; as the source code was never released by Google.
What is more likely to happen is that 2.3.5 will be on the initial CM release for the Pad; with ICS being the next logical step, once it's released.
I may be wrong,
But I believe that is the long and short of it.
Hope this helps.
ugh! I would settle for 1.6 just so it is not the ugly webOS cripple.
I actually kind of like WebOS.
The not-having-multiple-screens-to-swipe-left-or-right thing takese a bit of getting used to (I'm not sued to it yet).
But I do like bouncing apps away, to close them.
That being said,
I definitely favor Android over all other O/S.
kienz said:
i actually kind of like webos.
The not-having-multiple-screens-to-swipe-left-or-right thing takese a bit of getting used to (i'm not sued to it yet).
But i do like bouncing apps away, to close them.
That being said,
i definitely favor android over all other o/s.
Click to expand...
Click to collapse
weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!!!
the fact that it boots properly and shuts down will tie me over until cm7 comes out. even though i cant really do much on this. lol
thanks to OP for finding this, and to the chinese dudes who created this.
Silver_172 said:
Looks okay , But was hoping for more a Honeycomb GUI , as ive just got rid of a 2.3 Tablet to get the HP touch pad to flash to 3.0 but will 3.0 ever happen for the Touch pad ?
Click to expand...
Click to collapse
Nope
..
But 4.0 will!!
I tried it, very buggy but does not affect your system so feel free to play
Sent from my Nexus S 4G using xda premium
I am really hoping this progresses fast and works well. I actually enjoy webOS card system but the lack of apps is disappointing. I would much rather be able to run android on a card.
Either way though, I plan on installing android whether it's dual boot or via card.
goTouchGo said:
weibo.com/chomper
t.cn/aDdv3E
Click to expand...
Click to collapse
The preware twitter feed, states that this app installs another kernel and that the un-instal option doesn't remove it.
Be warned!
Fon22
I installed it and it works fine (for what works at least). Anyone know how to actually install another app into it? I downloaded an APK and put it in the apks folder (in webOS) but I don't know where to look for it within chroid. Is this even possible? The guide says you can do it.
Fon22 said:
The preware twitter feed, states that this app installs another kernel and that the un-instal option doesn't remove it.
Be warned!
Fon22
Click to expand...
Click to collapse
Edit: I just checked back in WebOS and Govnah doesn't show the overclock kernal. Uninstal/Reinstall the stock or overclock kernals doesn't change it. Max Freq. is 1.2 ghz ... uh oh
mountaindewmi said:
I installed it and it works fine (for what works at least). Anyone know how to actually install another app into it? I downloaded an APK and put it in the apks folder (in webOS) but I don't know where to look for it within chroid. Is this even possible? The guide says you can do it.
Edit: I just checked back in WebOS and Govnah doesn't show the overclock kernal. Uninstal/Reinstall the stock or overclock kernals doesn't change it. Max Freq. is 1.2 ghz ... uh oh
Click to expand...
Click to collapse
if you want to O/C again, you have to doctor 3.0.2 back on, then redo the preware etc.
as for the apps, put them in that folder and they will auto install, thats what i did, and got titanium installed (even tho its useless/keeps crashing, i had it available)
3.0.3
Sent from my Nexus S 4G using xda premium
ghostzyden said:
When you install chroid, don't go into govnah while its installed, when you uninstall chroid, you should be fine and not have to worry. That way you wont have to doctor all the time
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
wow, thanks for quoting me almost line for line from the other thread :/
i figured this out last night after many hours of testing
http://forum.xda-developers.com/showpost.php?p=18270362&postcount=127
Solidus_n313 said:
wow, thanks for quoting me almost line for line from the other thread :/
i figured this out last night after many hours of testing
http://forum.xda-developers.com/showpost.php?p=18270362&postcount=127
Click to expand...
Click to collapse
My apologies, just trying to help get the word out. I know you spent time on figuring out and did not know if you would post it here. I saw people didn't know, so I thought I'd help. Again, my apologies.
Sent from my Nexus S 4G using xda premium
http://forum.xda-developers.com/showthread.php?t=1158951
That can probably be done with this phone since it uses the same chipset as the E3D and Sensation. Once I get mine next tuesday/wednesday ill see what I can do about getting this module to work.
If anyone takes a look at it, post anything you have tried. This could in theory at the very least allow an undervolt which would help offset the LTE power sucking.
Yeah see I wwas talking about this earlier. I think this will work. I PMed viperboy who actually wrote one of the bloatware scripts when we had temproot. Just waiting for a response AMD hope to get a jump start on this. Good idea starting this thread tho
Sent from my ADR6425LVW using Tapatalk
reverepats said:
Yeah see I wwas talking about this earlier. I think this will work. I PMed viperboy who actually wrote one of the bloatware scripts when we had temproot. Just waiting for a response AMD hope to get a jump start on this. Good idea starting this thread tho
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Coming from the bravoc which has almost zero development aside from 2fast at his site I am used to just thinking of things to try. I was able to port a couple dinc roms to it even though I was told it couldn't be done. I hope to be much more involved with development here since there are already more posts in this section than there were in a year at the site dedicated to the bravoc
con247 said:
Coming from the bravoc which has almost zero development aside from 2fast at his site I am used to just thinking of things to try. I was able to port a couple dinc roms to it even though I was told it couldn't be done. I hope to be much more involved with development here since there are already more posts in this section than there were in a year at the site dedicated to the bravoc
Click to expand...
Click to collapse
Yeah I.hear ya. I.haven't gotten much Involved myself buy then again I'm no dev LOL. But I k.ow my way around a bit. But I think the dev section is gonna he hoppin as well.
Sent from my ADR6425LVW using Tapatalk
It took a few days to get that inc port almost bugfree (usb pc transfer wouldn't work) but it was otherwise fine iirc. I hope that with support and other work to use as examples i can make some stuff for this device that isn't either a variation of AOSP or a sense port that has some serious drawbacks.
I am personally more interested in the possibility of underclocking and undervolting than OCing. Or maybe OCing and undervolting like I did with my droid x - can really help save some battery and allow the phone to sip less juice. This phone is so new I am getting ahead of myself, but hopefully in time we can get root/roms/OCing and undervolting apps to work on the Rezound.
I normally run my battery on performance mode on all my phones. I set it to normal, and with the equivalent usage I get 1/3 better battery life. I even leave all my antenna's on(except WiFi when I am away).
Just to let everyone know what I tried. I took the file for "unsupported phones" from the link's thread and changed the version number to match the rezound, which is -- 2.6.35.13-g20c5d1d -- . As you can see it was not just the ending part starting with the 'g' that needed to be changed as ours is 2.6.35.13 and the file was made for 2.6.35.10. But since a reboot resets everything I tried it by changing only the part starting with 'g' and it failed saying "Exec format error". So I then changed the entire version string to match ours and adb actually completed the task but the phone rebooted immediately and everything was wiped out again.
I did this before the kernel source was put up on the forums but since I dont have ANY knowledge of messing with kernels I am no help there, but hopefully this can help someone get this mod going for the Rezound.
we don't have perma root like the 3vo did so I don't think this will work until then. But this was a band aid until the kernel source was released so this won't even be necessary anymore.
con247 said:
we don't have perma root like the 3vo did so I don't think this will work until then. But this was a band aid until the kernel source was released so this won't even be necessary anymore.
Click to expand...
Click to collapse
The guy who made Setcpu made a script that allowed oc on the stock kernel on the 3D. It was before perm root. It was right after agrabren found the first exploit and a reboot would return the phone to stock. You temp rooted ran the script from adb and used Setcpu to oc.. Some of the smoothest kernel action the 3D had.. I'm sure same thing is potentially there, just need someone smart enough to do..
Sent from my PG86100 using xda premium
send me a link. Ill take a look at the script.
pstevep said:
The guy who made Setcpu made a script that allowed oc on the stock kernel on the 3D. It was before perm root. It was right after agrabren found the first exploit and a reboot would return the phone to stock. You temp rooted ran the script from adb and used Setcpu to oc.. Some of the smoothest kernel action the 3D had.. I'm sure same thing is potentially there, just need someone smart enough to do..
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Yeah I rememba that man. I was just talking about that the other day. I also mentioned that maybe we can use that somehow but I wouldn't know where TP start. But we need a stable Temp Root first I think. Not degrading anyone's work either.
Sent from my ADR6425LVW using Tapatalk
con247 said:
send me a link. Ill take a look at the script.
Click to expand...
Click to collapse
It will take me a little time to find. I don't think I have the script on sd anymore and the thread is buried deep. I shall go look.
Edit: ironically easier than I thought to find. Here is the thread from the 3D forum.
http://forum.xda-developers.com/showthread.php?t=1158951
And I know for a fact this worked and worked well. I used for a while, well up until we were s-off..
Sent from my PG86100 using xda premium
sooooooo set cpu works with root....i made a profile for screen off. seems to be working.....
combatmedic870 said:
sooooooo set cpu works with root....i made a profile for screen off. seems to be working.....
Click to expand...
Click to collapse
Cool. I did find a tidbit that might (don't get your hopes up and basically pretend I didn't even say this) make root last longer. Obviously until I have my rezound for the next few days I can't even think about testing anything.
Then put it out there for us to test! Don't be selfish! lol
AtLemacks said:
Then put it out there for us to test! Don't be selfish! lol
Click to expand...
Click to collapse
I will once I get around to writing it. I am in class right now then I am driving 5 hours home. So maybe tomorrow afternoon Ill get a script working. Also, I may have figured out a way to disable elements of sense in an automated script(for those that don't like sense).
con247 said:
It took a few days to get that inc port almost bugfree (usb pc transfer wouldn't work) but it was otherwise fine iirc. I hope that with support and other work to use as examples i can make some stuff for this device that isn't either a variation of AOSP or a sense port that has some serious drawbacks.
Click to expand...
Click to collapse
Since I happened to venture to theses parts since our buddy plat ventured to this. I am a bit surprised to see you switched. How ever the module you are talking about in the op I am pretty sure you can't just hex edit the kernel version. As the kernel will be different for the device compared to that of the evo 3d. If it is anything like doing the g2 version for the htc merge that is. Where it had to be recompiled to work correctly.
I am sure one of the dev's familiar in here with building source code could get it done up. If it works after that I am unsure. Though con you ported the sense hd rom from the inc to the desire. That was the only one that you had ported. Followed by you followed samuel2706's guide and other info he gave you. Then you came to me to ask how I fixed the mms and verizon branding in the rom. In which I told you how to fix it but you put it off as you fixed it. As you are putting off in here.