I need help, do not ask me why but I deleted the file from system "build.prop"and now I only sees the initial screen and big letters, I tried to restore system but do not see it on the phone, I need to copy a "build.prop" from pc to phone, but how?
wery simple
Download SuperOneClick from this forum
Connect you devise to PC via USB cable
Run the program and select RootShell - this option gived to tou root in your session then use adb to remount yor /system path and copy build.prpop to device.
thanks for your answer, but the problem is that superoneclick say "waiting for device" because i can not see menu in my phone for activate usb debugging
i need Enable USB Debugging Mode via pc or via wifi, not via phone
ouch... its bad NEWS....
i think you can only reflashing you device!
Or you can tryed restore your /system from SEUS
This is dont wipe your data i think !
thanks for your help, i reflashed with flashtool but not work, i try too SEUS but not work.
when you flashed you device with flashtool - you seleat all rom components or custom?
I think you need flashing full rom !
Or if this dont help, flashing a rooted firmware and try to connect with adb !
Related
Hey Guys!!
Ok, so I;ve been googling and searching for hours and hours and I'm still unsure as of what to do.
I have already updated an X10mini e10a successfully using xrecovery and flashing with binary's flashtool.
My oproblem is with another phone, same model same country etc.
I cannot update the firmware etc and baseband here using seus, so I tried to flash using flashtool. Device is rooted and had xrecovery installed.
THen it went wrong. I tried to update the baseband with flashtool and I had forgotten that I had not reinstalled xrecovery on the new generic rom.
I aslo managed to select the wrong update for flashing and now the boot is stuck in the famous bootloop. It actually arrives at the lock screen, but then crashes after 20 seconds.
The problem is that I can;t boot into recovery mode. Flashtool allows me to gain root access and even push apk files to the device before it reboots again.
I tried to install xrecovery from the menu using flashtool but it says restarting device in recovery but does not.
SEUS does not help me at all, it says there are no new up0dates, and when I try to recover, I get an error after the download has finsihed.
If I try to flash a generic firmware (the original one that i had already successfully installed before the screwup), flashtool tells me that I need to go into the device and enable usb debugging, which of course I cannot.
Is there a way I can do this in adb? How would this be performed? Would i just push a zip or are there a whole list of commands to do. I can;t seem to find a guide in the forums that applies to me.
Thanks guys!!
Get seus to the point where it sais turn off and hold back button while connecting the USB cable.
Then instead of turning it off, just press home+power button at the same time to reboot the device then release and try to get it right with the back button and pushing in the usb cable. Easy!
Might have to give it a few tries, I made it on my second try the first time I needed to do it
It's not a problem of getting the phone into service/flash mode, I have been doing it this way with no problem. SEUS just says I have the most up to date software, and pc suite gives an error when trying to repair.
I woul update with flashtool, but it tells me to turn on usb debugging which i obviously can't do.
Thanks for the help though, I only found out about the 3finger reboot earlier today. Had been removing the battery cable!!
I got that, but with SEUS i just press install anyways so I don´t get it really.. try removing cache on the SEUS program, maybe that helps
Done that too no joy either.
Im now completely out of ideas
did you try to install xrecovery from ADB Mask Controller?i dont know if its possible without usb debugging but give it a try or try to push files manualy if you can
giannhs_n said:
did you try to install xrecovery from ADB Mask Controller?i dont know if its possible without usb debugging but give it a try or try to push files manualy if you can
Click to expand...
Click to collapse
I haven't tried that, I did a backup of the vanilla os before i flashed the rom so if it works I should be able to revert to vanilla again.
How would I go about doing this?
take a look here, is the app http://forum.xda-developers.com/showthread.php?t=868423
try to see if you can connect on your phone
I tried thap program, looks like I could have a lot of fun with it on my working x10mini!!!
It does not connect to my other mini. Flash mode gives no device connected, and when it starts to load, I can connect but only until the device restarts itself, I cannot push apks either as there is not enough time, or they just fail, and although I can install busybox, it always tells me it is not installed, nor is root. I think this might be because the superuser apk must be asking me a question, but as the lock screen crashes on boot, I am unable to access it to allow access.
Driving me crazy.
I think my last hope is to flash with adb, but i have no idea to do that.
Is there a way to install xrecovery e10a by adb? How would I do this?
If this works I can just restore my old image and start from the beginning again
Would I use sin files, or would I use
Hello forum members,
The micro USB port on my Galaxy S2 seems to be damaged. The computer doesn't detect the internal storage on it and I also don't even get the "Usb Connected" anymore in the drop down menu of Android 2.3.4 KH3. I am able to charge the phone though.
I am currently running Litening ROM KH3 and i need to install a stock ROM before i can give this phone to the service centre for repair/replacement of female micro usb port as this is still under the warranty.
Is there any way for me to flash stock firmware via recovery. I suppose i would need a zip file for that. Isn't there a way to convert those stock firmwares into ZIP format?
PLEASE HELP!!
You can try with Virtual Data Cable in the Market
Thanks but this won't work when the phone goes into download mode.
Anyone please. I would really appreciate the help here!!
RohitSGS2 said:
Thanks but this won't work when the phone goes into download mode.
Anyone please. I would really appreciate the help here!!
Click to expand...
Click to collapse
Maybe it's the USB connector? I had the same problem as you where it could only charge and trying to access storage would freeze explorer
Stylee32 said:
Maybe it's the USB connector? I had the same problem as you where it could only charge and trying to access storage would freeze explorer
Click to expand...
Click to collapse
The problem is that neither my laptop detects the USB connection (it starts charging the device though) nor my phone's drop down menu shows the "USB Connected" notification .. So i guess the USB Connector is damaged ..
Any help guys? Please?
try adb wireless (widget edition)
you can connect via adb with the command: adb connect YOURPHONEIP:5555
and then push the zip to flash on the sdcard via the command: adb push ZIPFILE /sdcard/
after that, if you have already CWM type: adb boot recovery
and flash the FW via CWM
lynx_deb said:
try adb wireless (widget edition)
you can connect via adb with the command: adb connect YOURPHONEIP:5555
and then push the zip to flash on the sdcard via the command: adb push ZIPFILE /sdcard/
after that, if you have already CWM type: adb boot recovery
and flash the FW via CWM
Click to expand...
Click to collapse
Thanks mate.. ill try this solution over the weekend. I hope it works.
Did you get this right?
My USB port just melted, and I am rooted and on Darky ROM. I'l like to send it back for warranty. HOWEVER< it seems like a hardware fault, so I thought the root/non-root wouldn't make any difference?
Hi bros.
I've faced a really bad situation:my rom is Kang ICS and it doesn't have wifi or bluetooth or...or every connectivity.and I don't have a backup or another rom in my storage.I wonder adb with pc helps or not.
My device is GT-P7500...
thanks for your upcoming answers...
clockworkmod
I tried connecting my device to pc in clockworkmod recovery via usb but got an error message.any help?
link to another thread discussing this problem:
http://forum.xda-developers.com/showthread.php?p=28371384#post28371384
If you can connect the tab via adb to you computer you can copy a new rom from your computer to your tabwith the adb push command (just google it if you dont know it)and then flash this rom in cwm ;-)
Does Odin work? If yes just flash a full stock rom!
Thanks.it works!
Hi to everyone.....!
Pls read my post and help me to resolve my problem, here my problem is that I'm unable to connect my Xperia u rom jellybean 4.1 v6 full kernel-experimental, to system when I connect my phone to pc it's only charging but my phone internal memory is not getting detected by my pc for a past 3 months I searched Google, xda but nonepost hhelped me and I got sick and tiered of being like this due this I'm unable copy any media files to my device. I tried with more than 7 pc mine's and my friends pc but in none worked I also cleared data of mtp extension services in settings>apps>all but nothing helped,, tried with adb but that also dint work. I tried with sdcard mod app installed in my phone and mounted with mtp and sdcard but nothing happened,tried connecting in fastboot and flashboot but it's not happening bcz while I'm connecting the phone in both fast and flash boots my phone illumination light blowing blue and green for just 3 seconds and phone turning on due to this my pc as well as my friends Pc not detecting in both fastboot as well as in flashboot. I tried with soft and hard reset my phone by following pressing vol up and power button for one vibration for softbrick and 3 vibration for hardreset but still nothing happened. And reinstalled mine's and my friends pc's os xp,Windows 7,8 as well as drivers for my phone fastboot,flashboot, and usbdrivers from both flashtool new and old versions as well as developers.snowmobile.com website but nothing happened finally I went Sony service centre in Chennai basically I'm from chennai. Over there they asked warranty I said it's out of warranty and they said it's board problem that too without checking they said this and asked for payment of 8000 inr, it's 80% of phone cost.I got wexed return my home with tears yes I'm not ashamed to tell this bcz my phone is morethan anything for me and finally I came to conclusion for hardware problem and I writing this in xda with my final hope if here in this forum to none help then I leave it to god.let me ask you devs and friends pls help I'm in great depression not popping out anything in mind was idle. Due to budget problem I'm unable to repair or any new phone. FINALLY MY LOST WORDS IM GREAT FANBOY FOR SONY PRODUCTS ESPECIALLY MOBILES AND TV,THIS MY XPERIA U IS AN MY ONE AND ONLY FIRST SMARTPHONE IT WORKED FOR PAST 1 1/2 YEARS LIKE CHARM BUT NOW THIS THING HAPPENED.I KNOW VERY WELL IN ELECTRONICS ANYTHING HAPPEN AT ANYTIME SO IF I BLAME MY BEST SONY I WILL PUT IN GREAT GILT,I LIKE TO CONVEY MY REQUEST THAT NEAE FUTURE PLS TRY TO STICK WITH SDCARD BCZ IF THIS MTP PROBLEM ARISES THEN BY MAKING USING OF SDCARD WE CAN HAVE CHANCES SONY PLS STICK WITH THAT.IF IT'S THERE THEN I MIGHT HAVE ALTERNATIVE BUT DUE TO MTP IM STUCK,I KNOW THERE MIGHT BE ANY REASON FOR NOT PUTTING SDCARD SLOT IN XPERIA U BUT STILL I REQUEST YOU SONY PLS PUT SDCARD SLOT IN UPCOMING XPERIAS. So finally coming to xda devs and members and friends I REQUEST you one and all to help me with this problem.please help me please help me please help me.THANK YOU ALL DEVS WHO ARE ALL SUPPORTING FOR CUSTOM ROMS,MODS especially DEVSHIFT,MUNJENI,DROIDXTREMER,DIVAKISH,etc.THANK YOU ALL OF THEM PLS CONSIDER THIS AS YOURS PROBLEM AND HELP ME OUT IN THIS.THANK YOU.
Bro try flashing Phantom Kernel 1.0.7 touch version via fastboot......
And you can always transfer files with ADB.Don't give up hope.....
Stock Version: http://www.mediafire.com/?hn20cc3y29n5ce0
CM Version: www.mediafire.com/download/1y9eili64qcc4s9/Phantom[1.0.7]-CM-PowerSaver.zip
AKA#1 said:
Bro try flashing Phantom Kernel 1.0.7 touch version via fastboot......
And you can always transfer files with ADB.Don't give up hope.....
Stock Version: http://www.mediafire.com/?hn20cc3y29n5ce0
CM Version: www.mediafire.com/download/1y9eili64qcc4s9/Phantom[1.0.7]-CM-PowerSaver.zip
Click to expand...
Click to collapse
First of all I wanna thank you from my heart for your kind reply I have tried phantom kernel nothing happened and regarding adb samething nothing working would u help me how to connect in adb pls bro once again thank you
kumar8904 said:
First of all I wanna thank you from my heart for your kind reply I have tried phantom kernel nothing happened and regarding adb samething nothing working would u help me how to connect in adb pls bro once again thank you
Click to expand...
Click to collapse
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Bro AndroidNoob69's right.Please provide details about your
PC Operating System
ROM
USB Port........
AndroidNoob69 said:
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Click to expand...
Click to collapse
im using usb 2.0 port, pc os - windows 7 and mobile rom [UNOFFICIAL] Stock JellyBean 4.1.2 V6 [FULL] by DevSwift1, kernel - first experimental 0.3c and after suggestion phantom
AKA#1 said:
Bro AndroidNoob69's right.Please provide details about your
PC Operating System
ROM
USB Port........
Click to expand...
Click to collapse
pc--- windows 7
mobile-- DevSwift1jellybean v6 full
usb port-- 2.0
AndroidNoob69 said:
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Click to expand...
Click to collapse
i have tried checking ub debugging as well in settings>developers>usb debugging but still no chances and tried with sideload in CMW but nothing happened and tried with usb port 3.0 as well no luck
could you help me to push files through adb i have tried it but still adb pusher mod not working. adb stuck with waiting for device thats it this adb also not detecting my phone
Bro try making a CWM backup and reflash the ROM after triple wipe....I don't know why ADB's stuck.
QUOTE=AKA#1;4714 903 3]Bro try making a CW M b ackup and reflash the ROM aft er triple wipe....I don't know why ADB's stuck.[/QUOTE]
I did everything bro but nothing happened , I installed rom moretha. 5 times by wiping All the Necessar. One
Why don't you flash stock ICS firmware in flashmode(via flashtool)??
Have you tried flashing stock rom with flashtool?
You can also try (re)mounting sdcard in cwm recovery or with adb.
In cwm it's located in mounts and storage --> mount sdcard.
When you connect your phone to pc, do you see that "usb debugging enabled" notification?
If not you have to enable it from developer options. And when you try to do something with adb, does it give any error message, such as "device offline", "device not found" or "waiting for device"?
AKA#1 said:
Why don't you flash stock ICS firmware in flashmode(via flashtool)??
Click to expand...
Click to collapse
bro i already to;d you that iam unable to connect in any mode flashboot and fastboot i had reset soft reset used rubber band trick but nothing happened
MarketMaster said:
Have you tried flashing stock rom with flashtool?
You can also try (re)mounting sdcard in cwm recovery or with adb.
In cwm it's located in mounts and storage --> mount sdcard.
When you connect your phone to pc, do you see that "usb debugging enabled" notification?
If not you have to enable it from developer options. And when you try to do something with adb, does it give any error message, such as "device offline", "device not found" or "waiting for device"?
Click to expand...
Click to collapse
i have tried remounting in cmw but nothing happened about adb none response, there is no error. i have checked usb debugging while connecting with pc in mobile no such words "usb debugging enabled" its just charging thats it nothing more than that
your problem is that ur drivers are crashed because of some weird reason..
Download usb deview at http://www.nirsoft.net/utils/usb_devices_view.html#DownloadLinks
unplug your phone..
now unzip the app and run it..
in the vendor id tab search for drivers having id as - "0fce"
Select ALL of them and uninstall them by right click --> uninstall selected.
remove sony pc companion.
restart your pc..
download latest adb and fastboot drivers here : http://rubenalamina.mx/download/525/
simply run the installer..
default install directory is C:\ADB
now turn off usb debugging and then connect your phone.
let it install mtp drivers.
now download flashtool https://unrestrict.li/flashtool
install the flashtool.
(optional but still recommended) disable antivirus and firewall of pc
go to install directory of flashtool and locate folder "drivers"
open it and run the installer.. you will see a window asking which driver to install check the following items:
-xperia p, u, sola, go, drivers,
-fastboot
-flashtool
when its done unplug turn on usb debugging and go to installed directory of adb, press and hold shift key and then right click anywhere in that folder..
select open command prompt and pass this command:
adb devices
you should see at least one device connected.
if yes you are succeeded and fastboot will work too.
kumar8904 said:
i have tried checking ub debugging as well in settings>developers>usb debugging but still no chances and tried with sideload in CMW but nothing happened and tried with usb port 3.0 as well no luck
could you help me to push files through adb i have tried it but still adb pusher mod not working. adb stuck with waiting for device thats it this adb also not detecting my phone
Click to expand...
Click to collapse
Did you install PROPER DRIVERS?
I am back. Ignore forum signature 1st line.
You need to have excatly the same thing like on picture in attachment! If not than simple download usb drivers from my site http://munjeni.homeunix.com
AD9295 said:
your problem is that ur drivers are crashed because of some weird reason..
Download usb deview at http://www.nirsoft.net/utils/usb_devices_view.html#DownloadLinks
unplug your phone..
now unzip the app and run it..
in the vendor id tab search for drivers having id as - "0fce"
Select ALL of them and uninstall them by right click --> uninstall selected.
remove sony pc companion.
restart your pc..
download latest adb and fastboot drivers here : http://rubenalamina.mx/download/525/
simply run the installer..
default install directory is C:\ADB
now turn off usb debugging and then connect your phone.
let it install mtp drivers.
now download flashtool https://unrestrict.li/flashtool
install the flashtool.
(optional but still recommended) disable antivirus and firewall of pc
go to install directory of flashtool and locate folder "drivers"
open it and run the installer.. you will see a window asking which driver to install check the following items:
-xperia p, u, sola, go, drivers,
-fastboot
-flashtool
when its done unplug turn on usb debugging and go to installed directory of adb, press and hold shift key and then right click anywhere in that folder..
select open command prompt and pass this command:
adb devices
you should see at least one device connected.
if yes you are succeeded and fastboot will work too.
Click to expand...
Click to collapse
bro thanks for your reply and effort for support and yes still im unable to connect my pc i followed every bit clearly as you mention in detail but still no chances. and i cant see 0fce" in vendor id.still i followed everything like adb,flashboot and flashmode drivers,flashtool drivers installed turning on usb debugging every ****ing thing but still no chances brother will you help me?
munjeni said:
You need to have excatly the same thing like on picture in attachment! If not than simple download usb drivers from my site http://munjeni.homeunix.com
Click to expand...
Click to collapse
bro i cant find those sony adb in device manager im using windows 7. i have installed everything but in uninstall and remove tab i cant see sony adb
This may sound silly but two things,
have you tried a different usb port
and is the sdcard mounted in cwm.
I have to make sure the sdcard is mounted before i can connect mine.
Do a hard reset hold power and up till the phone vibrates 3 times then try to connect to flashtool by holding power and volume down.
The titel says it all , and I need some help. I can still go in recovery but adb won't recongize my HTC, but I can still find it in fastboot. I formatted the sdcard, so I have nothing on there. Help would be much appreciated.
vsp33ddyv said:
The titel says it all , and I need some help. I can still go in recovery but adb won't recongize my HTC, but I can still find it in fastboot. I formatted the sdcard, so I have nothing on there. Help would be much appreciated.
Click to expand...
Click to collapse
Oh, trust me that's not your phone being bricked. You guys seriously need to know the correct vocabulary.
Bricking the phone: The phone's only use is to use it as a literal brick. It does not turn on, does not recover, does not charge, does not do anything and it can never be restored.
HOX+ can NOT be bricked unless you are S-Off'ed. Now that we got that out of the way,
you seem to understand that ADB is the solution here, that you need to sideload a rom, the question that you have is the adb does not recognize your phone, so follow these steps:
-Connect the phone using a different usb port, (basically thats the easiest thing), if its 2.0 then try 3.0 and vice versa.
-Restart your computer
-Restart your phone
-If you are on windows Vista and later, open start menu search for "cmd" then right click and run it as administrator, then you need to cd to your adb directory.
Code:
cd C:\Android\sdk\platform-tools
for example. then try adb devices.
Anyway hope you get it to work and have fun
Ghand0ur said:
Oh, trust me that's not your phone being bricked. You guys seriously need to know the correct vocabulary.
Bricking the phone: The phone's only use is to use it as a literal brick. It does not turn on, does not recover, does not charge, does not do anything and it can never be restored.
HOX+ can NOT be bricked unless you are S-Off'ed. Now that we got that out of the way,
you seem to understand that ADB is the solution here, that you need to sideload a rom, the question that you have is the adb does not recognize your phone, so follow these steps:
-Connect the phone using a different usb port, (basically thats the easiest thing), if its 2.0 then try 3.0 and vice versa.
-Restart your computer
-Restart your phone
-If you are on windows Vista and later, open start menu search for "cmd" then right click and run it as administrator, then you need to cd to your adb directory.
Code:
cd C:\Android\sdk\platform-tools
for example. then try adb devices.
Anyway hope you get it to work and have fun
Click to expand...
Click to collapse
The only thing I can do is use fastboot , thx for noticing that I know I need adb sideload If I look in devices on my PC I can see 'ONE' with a yellow triangle next to it ( so this means drivers) I downloaded my HTC drivers and I right clicked on the device and then update from PC , I go to the folder where I installed it and click on search and it says it can't find a driver for this device.
I also tried 4 different USB ports both 2.0 or 3.0 , no result. I also tried to install TWRP instead of cmw but on TWRP my touchscreen doesn't work while on cmw it does. So i went back and flashed my recovery to cmw again ( I tried version 2.6 - 2.7.0.1 , no result )
So my problem right now can be solved once my device can be recognized by my PC. (Have HTC maneger installed , also downloaded drivers formy phone , got fastboot and adb on my PC )
For anyone who knows thanks
vsp33ddyv said:
The only thing I can do is use fastboot , thx for noticing that I know I need adb sideload If I look in devices on my PC I can see 'ONE' with a yellow triangle next to it ( so this means drivers) I downloaded my HTC drivers and I right clicked on the device and then update from PC , I go to the folder where I installed it and click on search and it says it can't find a driver for this device.
I also tried 4 different USB ports both 2.0 or 3.0 , no result. I also tried to install TWRP instead of cmw but on TWRP my touchscreen doesn't work while on cmw it does. So i went back and flashed my recovery to cmw again ( I tried version 2.6 - 2.7.0.1 , no result )
So my problem right now can be solved once my device can be recognized by my PC. (Have HTC maneger installed , also downloaded drivers formy phone , got fastboot and adb on my PC )
For anyone who knows thanks
Click to expand...
Click to collapse
Hmmm. I would say in the device manager right click on the one and uninstall. Then in fastboot mode unplug and replug the device, let it install fastboot again and then try if adb can read it now.
Ghand0ur said:
Hmmm. I would say in the device manager right click on the one and uninstall. Then in fastboot mode unplug and replug the device, let it install fastboot again and then try if adb can read it now.
Click to expand...
Click to collapse
Still can't read it...
This has happened to my phone twice... fixed it the first time by using USB deview to remove all Android/HTC drivers, then reinstalled them with the HTC Sync installer. Couldn't get that to fix it last time though, so I tried another computer and it worked just fine. So my advice would be to find another computer and try it.
911jason said:
This has happened to my phone twice... fixed it the first time by using USB deview to remove all Android/HTC drivers, then reinstalled them with the HTC Sync installer. Couldn't get that to fix it last time though, so I tried another computer and it worked just fine. So my advice would be to find another computer and try it.
Click to expand...
Click to collapse
YES THIS IS WHAT WORKED ONLY I DID SOME OTHER STEPS TOO!!! Now I got adb running again and I can only push , I'll explain later in a full tutorial how to fix this now you guys can help me , I'm trying to download a cyanmod for my HTC because the stock is german and I can't download it , so can anyone upload the cyanmod endeavouru for me I keep getting error 502 bad gateway I almost fixed it !!!!! I need it badly !
OOkay so I thought I had figured it out , I uste TWRP to push files from PC to my Phone , then I installed cmw and tried to install the ROMS , but apperantly my roms were deleted. (I can't use TWRP because I need touch and the touch doesn't work , while in cmw the touch does work)
So if we can fix the TWRP touch I will know how to fix my problem !
I fixed the problem
I fixed the problem , thread how comming soon !
Here is my thread http://forum.xda-developers.com/showthread.php?p=52550145