Related
Hello everyone,
I'm new to the Eris. I've had it for a few months, but this is the first "in-depth" thing I've done with it.
I've decided to take the plunge and root the phone. I'm going to use the on-screen method.
My question is this: What do I need to do to prepare? I've got all my apps backed up to the SD card, and the phone is charging right now.
Any suggestions as to what ROM to use? Or what I need to get the Froyo update, etc?
I'm new, so I'm browsing and learning, but any information you guys have would be great. Thanks in advance.
If you want a Froyo rom, that is what you'll need to download. There are about a half dozen in the development section and all mention "Froyo" in the title. Read the entire thread and it's not a bad idea to read some comments. If the developer says you need the google apps aka gapps zip, get it too. Put both files (or only one if gapps isn't needed) on the root (not in any folders) of your sd. Once you're rooted you should enter recovery by powering off, then boot holding power and vol up (rooting instructions may take you there anyway). Youll see options to reboot, ms toggle, backup/restore, etc. Go to back up/restore and create a nandroid by following the prompts. Press vol down until you return to the home screen, then go to wipe. Wipe data/factory reset and wipe dalvik cache. Vol down back to the main screen and flash the new rom and gapps (if needed). ENJOY. Note: Read all instructions thoroughly before rooting. If any instructions i've listed are different then those listed in the official instructions, follow them first. Once you're rooted and begin changing roms frequently you need to always make a nandroid of the current rom your own (in case you dont like the new one or have problems flashing it), wipe data and dalvik (ext partition too if your sd card is partitioned and you're using a rom which allows apps2sd via a partitioned sd card - froyo currently does not), and backup your apps/settings via the app of your choice before flashing. If your upgrading your current rom you usually wont have to do a wipe (the developer will indicate it in the instructions).
It's a good idea to back up your apps before flashing new roms. Titanium is my favorite app but its for root only. Search the market. You can probably find an app to use before you root.
Sent from my Froyo Eris using XDA App
joshw0000 said:
If you want a Froyo rom, that is what you'll need to download. There are about a half dozen in the development section and all mention "Froyo" in the title. Read the entire thread and it's not a bad idea to read some comments. If the developer says you need the google apps aka gapps zip, get it too. Put both files (or only one if gapps isn't needed) on the root (not in any folders) of your sd. Once you're rooted you should enter recovery by powering off, then boot holding power and vol up (rooting instructions may take you there anyway). Youll see options to reboot, ms toggle, backup/restore, etc. Go to back up/restore and create a nandroid by following the prompts. Press vol down until you return to the home screen, then go to wipe. Wipe data/factory reset and wipe dalvik cache. Vol down back to the main screen and flash the new rom and gapps (if needed). ENJOY. Note: Read all instructions thoroughly before rooting. If any instructions i've listed are different then those listed in the official instructions, follow them first. Once you're rooted and begin changing roms frequently you need to always make a nandroid of the current rom your own (in case you dont like the new one or have problems flashing it), wipe data and dalvik (ext partition too if your sd card is partitioned and you're using a rom which allows apps2sd via a partitioned sd card - froyo currently does not), and backup your apps/settings via the app of your choice before flashing. If your upgrading your current rom you usually wont have to do a wipe (the developer will indicate it in the instructions).
It's a good idea to back up your apps before flashing new roms. Titanium is my favorite app but its for root only. Search the market. You can probably find an app to use before you root.
Sent from my Froyo Eris using XDA App
Click to expand...
Click to collapse
Wow, thanks for getting back to me with such detail. Very, very much appreciated. It turns out however, that I won't be able to do this.
I checked out http://forum.xda-developers.com/showthread.php?t=742228
I found that I had release keys under my build number, which indicates is the 2.1 leak - which really sucks, because I got the update OTA... why would they send out a leaked platform? That sucks
Ah well, thanks very much for your help. I'm going to take a look at my brothers phone, and see if we can root that. Thanks
You CAN root ANY eris now. Do a little more research.
Sent from my Froyo Eris using XDA App
my advice would be to save yourself the hadache and just dl the 1 click root app. soo worth it plus it goes to a good cause...http://forum.xda-developers.com/showthread.php?t=742228
I installed cm7 and it was working fine. I tried to install transformerbread theme through downloading on the browser and downloading through rom manager. Well when it rebooted. Nothing changed. except for now I cant get online and the settings wont even load. They all just crash. I'm not sure what I did wrong, as only thing I can think of is when rom manager asked what device I had(since theres no touchpad option) I used nook color. Anyways. Any idea how to fix this? If not how do I completely restart to cm7 as it comes from the start. I thought I made a restore point but its saying I didnt make a backup rom.
Appreciate any help. I'm clueless on my first android device.
I saw in one of the post Dal suggested not to use Rom Managers as it doesnt have that support. You can try boot into recovery do a complete wipe and reinstall or uninstall the complete stuff using Acme Uninstall start fresh.
So thats the best option? After rebooting how do I access ACME to uninstall? And what exactly do I uninstall?
Did you install moboot? If you did, boot into recovery (Clockwork), if you did a backup, you should see it in the backup /restore option. If you didn't, read through the forum, you'll find step by step instructions on how to install from scratch.
I think I remember reading that rom manager doesn't work with the TP.
I would just try wiping dalvik and cache in recovery then reflash cm7. It should overwrite the system changes. If that doesn't work, do like the previous poster said and do a full wipe and reflash
Sent from my Ice Cream Speedy
vince24l said:
so thats the best option? After rebooting how do i access acme to uninstall? And what exactly do i uninstall?
Click to expand...
Click to collapse
read the forum!
so what do touchpad users use, instead of rom manager?
vince24L said:
so what do touchpad users use, instead of rom manager?
Click to expand...
Click to collapse
rootzwiki.com
I cant find any beginner info on rootzwiki... maybe a more specific link? Even when I went to themes on rootzwiki there is no option for touchpad..?
First welcome to the Touchpad community.
As far as themes and what-not go, stick with things compatible with Theme Chooser. You have to remember, Android is still in alpha stage. Don't go putting the cart before the horse by flashing onto an Alpha Android. Just be patient and allow the devs to do what the do best and, if possible, donate to their project.
forum.xda-developers.com/showthread.php?t=1305891
Read through this thread, it has good, easy to follow instructions.
Google 'rootzwiki Touchpad forum ', it should point you to the right link.
Once you have Clockwork installed, you can flash roms with it.
Read the forum, it's one of the best ways to learn about Android and the TP.
I already have cm7 installed(clockwork comes installed with it) then I go to thread and downloaded transformerbread theme, then i rebooted into clockworkmod, then i clicked flash from sd card and selected transformerbread, then it abored installation, then i rebooted and now my settings force close and i have no wifi.
i suck at android.. any help please.
I am rooted if i have clockworkmod right?
When you flash cm7, it roots the TP.
To root it in webos, turn debugging on.
so if i want to flash a rom from my computer to cm7 instead of from browser on touchpad how do i do it?
Details are available in this link
Do not use Rom Manager. That is only for devices that have an official CWM.
vince24L said:
I cant find any beginner info on rootzwiki... maybe a more specific link? Even when I went to themes on rootzwiki there is no option for touchpad..?
Click to expand...
Click to collapse
Here's for a beginner. Step-by-step instructions:
http://forum.xda-developers.com/showthread.php?t=1403027
Okay i read his entire thread almost at least 100 pages, I searched countless times for a dummies installation guide
My old andriod dell venue broke so, Okay i got mad and threw it lol, anyways i read reviews about the Samsung Galaxy S2 so got it, I decided i want ICS and i choose his as it looks more favorable among the others.
My Model number is GT-I9100
Andriod version 2.3.4
Can some one please take the time to tell me what is the correct steps to take to make my phone capable of installing this Rom
I seen his instructions
Install the Main ROM 1.4 (important: dont install siyah kernel yet )
install aokp gapps
Reboot
and the Faq Link
Reboot into recovery
Wipe Data / Factory Reset
Wipe Cache Partition
Install the Main ROM
Install the Gapps for AOKP
In recovery go to Advanced
Wipe Dalvik Cache
Fix Permissions
Wipe Cache Partition
Reboot
This will be my first time doing this so can someone please dummy this down for me cause the install rom is greek to me, Do i need to put the rom somewhere, is there pre steps i must do before my phone will accept this
Thank you in advance to any one that helps
Hey,
Im assuming that you still have a factory standard phone so you will first need to root it. If you search google there is loads of guides on how to do this.
then you need to download and install CWM recovery (clockworkmod) again another google search
then you can proceed to the rom installation instructions
download the ROM (zip file ... dont unzip) and stick it somewhere on your SD card
turn your phone off then boot in to recovery by holding volume up, menu key and power button then do factory reset etc and then install zip from sd card (the zip being the ROM)
Please press the thanks button on this reply if you found it helpful
Cheers
Bidoa
Read and learn, everything is there for a noob : http://forum.xda-developers.com/showpost.php?p=24849218&postcount=3 thanks to JJE
Keep reading. All will come together. Basics first. Root then look on how to install roms. Patience.
Sent from my GT-I9100 using xda premium
First step you need to do is root the phone. I used the guide here after following what the guy was doing a few times in the video.
Then BACKUP YOUR EFS FOLDER as soon as you have root. An app called HC-KTool on the android market can do this. Be sure to verify your backup too and copy the efs.img to your PC for safe keeping.
Get titanium backup and batch backup all user apps and system data. Copy the folder on your internal SD onto your PC also.
Boot into CWM and make a backup here too.
Now you are ready to flash a ROM - Resurrection Remix ICS 1.4 here contains links and FAQ.
As it's your first ROM install you should follow the full installation guide in the FAQ. I stayed with the stock kernel as had problem with siyah and theroux.
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
P.S. First post in any forum ever, just a humble android noob searching for knowledge and stable Roms from those who offer, sorry if I have posted this in the wrong place, obviously I have posted at the wrong time! A million thanks in advance to anyone with good news or advice!
DB73 said:
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
Click to expand...
Click to collapse
What is it you are looking for? I have copies of a lot of ROMs.
doogald said:
What is it you are looking for? I have copies of a lot of ROMs.
Click to expand...
Click to collapse
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
DB73 said:
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
Click to expand...
Click to collapse
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
There is another method very well documented here: http://androidforums.com/eris-all-things-root/127861-universal-eris-root-dummies.html (which also walks you through installing for your first custom ROM.)
I have some ROMs in my Dropbox if you can't find links.
xtrSENSE (stock 2.1 Eris ROM, rooted): https://dl.dropbox.com/u/220420/Eris/xtrSENSE/xtrSENSE5.0.1.zip
Workshed's GSB: https://www.dropbox.com/s/dvpuv4sbwmun43f/GSB.v4.5-final_ODEXED_CM7.2-Eris.zip
CondemnedSoul's CM7.2: https://www.dropbox.com/s/g1irvshpg7u7trr/CCM7_Eris_V24_RIP.zip
The last two are CyanogenMod Gingerbread ROMs. I think that GSB requires that you also flash Google apps in order to get the market. If so, you can get it from CyanogenMod here: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
(So, if you need to flash gapps, you go into Recovery. Wipe data/factory reset. Flash the ROM. Flash google apps. THEN restart the phone.)
doogald said:
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
Just realized why it wouldn't let me post, because of the links in my reply, :silly:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
4. Is there any way to get google play instead of market working on the Eris?
(((Thanks again for everything)))
XML Parsing Error: unexpected parser state
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/toolkit/content/global/netError.xhtml
Line Number 308, Column 50:
Click to expand...
Click to collapse
DB73 said:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
Click to expand...
Click to collapse
Try this one: http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
CondemnedSoul's includes the Google apps already and does not require a separate flash of the gapps zip file.
Ok, I just checked: GSB does NOT require google apps, either; they are already included. You can ignore that step.
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
Click to expand...
Click to collapse
Oh, good question. I would avoid it if you can. The Eris will insist that you activate. However, if you follow the prompt to activate and then press the disconnect button as soon as you hear it ring, it will try activation again two more times. If you disconnect after hearing the ring those two times as well, the phone will give up on activation and allow to continue with setup.
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
Click to expand...
Click to collapse
Not necessarily. In my experience, xtrSENSE is fastest, but the GB ROMs are just fine. You may not notice the difference. However, xtrSENSE has a method called cache2cache that frees up more storage space or user applications and data. If you install a lot of apps, xtrSENSE may give you more space.
That said, there are disadvantages, including missing out on apps that do not run on android 2.1.
There is something called xtrcache2cache that you can flash on the GB ROMs to give you the same sort of space. I'll try to find a link.w
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
Click to expand...
Click to collapse
I've never tried it, and I can't believe it runs with any sort of decent performance anyway.
4. Is there any way to get google play instead of market working on the Eris?
Click to expand...
Click to collapse
Not on android 2.1, but the two gingerbread ROMs will update the market to the play store.
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
The download link there seems to work.
Copy that file (xtrCMCache2cache.zip) to your SD card. This is only for the Gingerbread ROMs - it's not necessary for xtrSENSE.
Restart the phone to recovery. If you have already flashed one of those ROMs, simply flash that xtrCMCache2cache.zip file - do not wipe data or Dalvik cache first. Restart the phone, and you'll have probably about 20-30 MB more free storage space for apps and data.
If you have not already flashed GSB or CondemnedSoul's, do this:
- restart in Recovery
- wipe menu
- wipe data/factory reset
- main menu
- flash a zip file, and choose GSB or Condemned
- flash a zip file, and choose xtrCMCache2cache.zip
- restart the phone
doogald said:
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
OK, I will read what I have gathered one or two more times before taking the plunge. I am thinking of using the Jcase method, it seems pretty much idiot proof. I have the file and ROMs stored on my PC, and now on a CD as well, just so I don't loose them. If I have this right, I will:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think! On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options. I guess the latter is best, and use only a custom ROM for my son to play with. Hopefully I can temporarily disable or somehow limit su before giving it too him.
4. Do Nand backup of original official image, and put somewhere safe, like 2 places + on CD then remove from SD for more available space.
5. Flash one of the 3 downloaded ROMs and also xtrCMCache2cache if desired to desire-c
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Edit # 2 I downloaded a MD5 calculator and this is the output (F34FECFFB985553B68D66F6AC1EF27D3) for the erisone010.apk file
Another big thank you Doogald, If I have something wrong here, please, feel free to beat it into me now, before I do something stupid!
Click to expand...
Click to collapse
DB73 said:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
Click to expand...
Click to collapse
No, Your regular SD card is fine. You do need to enable third-party app installs; you'll find that setting in settings->applications.
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
Click to expand...
Click to collapse
Yes. You must restart the phone as if you wanted to make a phone call. Many people get too eager and try to get into Recovery before full restarting.
I can't believe that flashing Amon_RA is all terribly dangerous. There are ways to recover. In fact, I have not seen anybody report a brick after running the JCase 1-click. I'm sure that it will be fine.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
Click to expand...
Click to collapse
You *could* do the Nand Backup before running rootme.zip. Actually, you only really need to run rootme.zip if you want to do something with root with the stock Android you have now. Some people may, for example, install the application Titanium Backup Pro (which requires root) and batch backup all user apps (menu->batch and choose to run that option from the list) and then, after installing a new custom ROM, reinstall Titanium from the market/play store and then batch restore all missing apps and data. It's a very powerful way to get the phone running all of your apps and data without reinstalling from scratch.
That brings up one more thing: if you decide to install xtrSENSE, you do not need to do a factory reset if you want to keep all of your apps and data. Of course, if you want a fresh start you may, but xtrSENSE will keep all of your apps and data and give you a faster Eris with more room for apps and data.
Also, it *is* possible to get stock recovery back, though not without losing all of you data. There is a ROM called Flashback_21v2 that will bring back stock recovery and an unrooted Eris if you wish. The phone will act as if it was never rooted. You can find it here: http://forum.xda-developers.com/showthread.php?t=792026
That would be a good thing to keep on your phone, just in case. (Though I have to say that I am hosting the location of those files on my website and I have no plans to stop doing so, so they should be around for a while...) You'll probably be fine with the "no radio" version, but if you can spare the space on your computer, (that's a bit of a joke; the files are small), I'd download both.
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think!
Click to expand...
Click to collapse
In that case, you DEFINITELY want to wipe data, even with xtrSENSE!
On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options.
Click to expand...
Click to collapse
No, you can do both. Do a Nand Backup of the phone after you root it, which will be stored on the SD card. Wipe data/factory reset and you can installa ROM and then always go back into recover and Nand restore what you backed up originally to get your phone back as it was when you ran the backup. Familiar with Norton Ghost for Windows PCs? That's what Nand backup and restore does - it takes a full snapshot of your phone as it is, and when you restore, it's as if you had just turned off your phone for a long time - it's back to the way it was at the time you made the backup. You can have multiple backups stored - as many as will fit on the SD card.
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
Click to expand...
Click to collapse
Well... xtrSENSE support apps2sd as it is, and there are scripts to turn that functionality on. The GB ROMs support using the Android-native moving of apps to sd, so I would avoid apps2sd for them.
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Click to expand...
Click to collapse
The MD5 I have for 1click is f34fecffb985553b68d66f6ac1ef27d3
HOWEVER, can I suggest instead that you use the 1-click root here, prepared by Scary Alien: http://androidforums.com/eris-all-t...2-custom-recovery-trackball-not-required.html
If you look at the bottom of the first post, "Scenario 5", there is another version of 1click with a better version of Amon_RA (that allows you to use the hardware keys to navigate recovery, rather than just the trackball; sometimes the trackball doesn't work in the original Amon_RA). That version I guarantee is safe, and Scary Alien has the MD5 right there.
I am guessing multi-quote is what I should have tried on this instead of deleting?
OK, running 1 click directly from from SD card. Third-party apps ticked on before hand, check.
After running 1 click, do normal restart, then shutdown, then go into recovery via vol / end start up.
No bricks reported, that is very good news. Also good to hear that there may be a procedure for un-bricking in the unlikely event!
My Eris already has already has all apps removed, I tried to make it as clean and small as possible. Just looked at the xtrSENSE page and copied some tips, sounds nice and fast, liking that!
Awesome, I downloaded all 3 including Cupcake, in case I want to remember what that was like.
I did exactly that, downloaded both.
I will give this some extra thought before giving it to my son.
I have never used Norton Ghost, but I have used Macrium Reflect, Seagate Disk Wizard, Acronis etc. I get the image/snapshot thing. I plan to store backups in other locations, then copy back to SD if and when needed.
Just did some reading on the xtrSENSE page about aps2sd, guess I will do some more reading about native moving of apps to sd soon.
The MD5 I have matches yours. I downloaded MD5 Calculator and I guess it works.
After reading the page including "Scenario 5" I absolutely agree. I downloaded it, and will use the "scary alien" modded version with the added functionality. Thank you very much for pointing this out. Looks like no change in the simple execution besides the app/file to run, very nice!
Doogald, I can clearly see that you go out of your way to help others to say the least, I am sure its appreciated by more than just me, Thanks!
DB73 said:
I will give this some extra thought before giving it to my son.
Click to expand...
Click to collapse
Hey, one other thing: CondemnedSoul posted a script that you can run that disables the mobile radio, so you can make the device WiFi only. It's here: http://forum.xda-developers.com/showthread.php?t=1216571
I have to say that I have never tried it, but it seems from the replies in that thread that many have, successfully.
Jelly Bean build anyone?
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
foodude1 said:
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
Click to expand...
Click to collapse
Of course it isn't redundant, in fact this maintains the forum active, well a bit.
Here is the Jellybean Rom you requested, it is from MongooseHelix's build. It has a different Gapps package from what MongooseHelix actually established but I assume no issues may occur. :highfive:
https://copy.com/TgfFHxTqOHPJ
So, after much research and trepidation, I flashed my first ROM to my i717 last week. Then I decided I didn't like that ROM and flashed another an hour later. So far it's been stable and speedy. I'm very happy. Thanks to XDA-Developers, Google, the Internet, and everyone who made this possible.
So, now, here's my simplified guide to doing what I did. This should NOT be taken as gospel. Please read as much as you can first. But, in an effort to give back, I thought a simple, step by step guide (or, more like links to the guides I found helpful) would be useful to someone. Are we sitting comfortably? Then let us begin.
1. Go here - http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/ - and root your phone. It will also install ClockworkMod Recovery. Both of these need to be done before you can flash a new ROM.
NOTE: I hear that TWRP is the preferred recovery app. I've tried it and it's very nice. It just so happens that I had ClockworkMod installed when I actually decided to flash a ROM. But use whatever you like.
2. Go to the Play Store and buy Titanium Backup Pro. Well, actually, download the free version then buy the Pro key. There are other backup methods, but I like this one.
3. Backup EVERYTHING. You might never restore a particular app, but best to have it and not need it than need it and not have it. I like to use the Google Drive option in Titanium to push by backup off my phone. But you can just hook it up to your PC and copy the backup folder from your SD card to your PC. This is just in case something REALLY bad happens. Best to have an off-phone backup.
4. Find a nice ROM to settle down with. I'm using Revolt (http://forum.xda-developers.com/showthread.php?t=2288566&highlight=revolt) but do your research and find one you like. If you decide to go with something built off Android 4.2 or 4.3 then you'll lose the Samsung Touchwiz stuff (fancy SPen features, etc.), but to me that wasn't as big a deal as I though.
NOTE: Make sure you know if the ROM need an additional Google Apps package. Sometimes they're listed with the ROM, sometimes not. Read and make sure or you could lose a lot of phone features or it may not even boot. Again, READING IS YOUR FRIEND.
5. Save the ROM (and GApps file if needed) to your phone's SD card (internal or external doesn't matter)
6. Boot into recovery (Hold Vol UP+Vol DOWN then press PWR and hold all 3 until you feel a vibration, then let go of PWR). When ClockworkMod (Or TWRP) comes up, RUN A BACKUP!
7. Read 6. Make sure you actually do it. I'll know.
8. Once you're sure you have your Titanium and ClockworkMod backups, follow the instructions for installing the ROM. Usually this involves (from ClockworkMod or TWRP):
a. Factory Reset
b. Wipe Cache (this is usually a part of Factory Reset, but doesn't hurt to do again)
c. Wipe Dalvik Cache (see cyanogen's response here for what this does - http://forum.xda-developers.com/showthread.php?t=519495)
d. Flash new ROM
e, Flash Google Apps (you can also wipe cache and Dalvik cache between d and e)
9. Now the moment of truth. Reboot. Wait. This can take some time, so don't fret if it seems to be taking too long. I'd say if it's over 15 minutes then you might need to worry, but chill before then)
10. When it does boot, you'll basically have a fresh, new phone. You'll need to enter your Google account and follow all the usual stuff you did when you first got your phone.
11. Leave your phone alone now. You can click around, but don't install anything new just yet. I've seen many a post about letting things settle. So, maybe, poke around for 15-30 minutes just to see but don't change anything. Then Reboot
12. Now reinstall Titanium. You can start reinstalling your apps. DON'T reinstall standard apps or they could break (e.g. email app or its data) as the new ROM might not support the old version of the app. My rule of thumb is don't restore any data I can get back from my online accounts (Email, FB, G+, Keep, etc.). All of your pics and that should be on your SD card and should not need to be restored.
13. That's it. If you enabled a scheduled backup in Titanium you might want to disable it for a while to make sure you like what you have. That way, you can go back if you don't like it.
Hopefully that helps someone. Please forgive any mistakes or omissions and if anyone with more experience wants to give it a once over I'd appreciate it.
Thanks and good luck.
Sorry guy, but on step one there is a very high probability of someone bricking their phone.
Why? Because it has happened about 100 times over the past two years from people using that site/method. If you flash the wrong kernel you kill your precious.
You should edit your step to say in the strongest terms triple check your operating system and get the correct kernel.
And step one is unnecessary because all roms here are already rooted.
1. Flash TWRP using pc and Odin.
2. Download new rom.
3. Boot into recovery.
4. Wipe cache, system, data.
5. Flash rom. Boot and wait 10 minutes.
6. Check settings for networks.
7. Optional modem flash.
Only wipe that's needed is a factory reset within recovery. That wipes /cache too. The dalvik cache resides on the data partition and is thusly wiped as well.
The Rom will have a format /system line within the updater script.
And within titanium backup don't backup or restore system settings (anything in the list that's red.)
And as said rooting first isn't needed unless you've been using stock for awhile and have apps you'd like to backup first... the easiest way to root is simply flash the latest twrp with Odin.. boot into recovery... then when you go to reboot the system it'll see that you're not rooted and ask if you'd like to do so.
Thanks for the feedback. Like I hope I stressed, this is the method that worked for me.
I guess I have the terms mixed up in 1. I'm saying to install ClockworkMod (or TWRP) and root your phone. I want to root it here because I want Titanium installed before I change ROMS so I can go back to exactly how everything was before modding if I want. Does that make sense?
Also, can you tell me what's specifically wrong with the site I link in Step 1? I was on ICS at the time I think. Does it brick if you do it on JB?
I'll change the step to say to go here instead - http://teamw.in/project/twrp2/96
Is that better?
Also, can you explain your cache wipe suggestions. I've seen the official instructions say to Reset, then Wipe Cache, then Wipe Dalvik. I know the last 2 are included in the first, but why are we explicitly asked to do them again? Why do you think we don't?
My thinking behind adding it here is that it does no harm and if some devs think that not doing it will cause problems then why not include it to be extra safe.
If you wanted it back to the way it was before modding anything then you could flash a custom recovery and do a nandroid backup before rooting at all.
Titanium backup needs root. If you want your app data after flashing a rom then that's when it's needed.
As far as extra wiping... putting your arms over your head spinning in a circle while chanting a manta does no harm either and is just as effective.
When you flash as often as I do... you wanna streamline the process. Extra anything is just that... Extra... and is just a waste of time
His first step is correct. No one that I know has bricked their phone using those directions because that link does not install any kernels. And it never did. It works for all versions of android. Even after all this time there is so much misinformation given.
Studacris's help is as good as gold though. He has put me in my place in the past.
Thanks Everyone.