Related
Hi Guys am quite new at this however i've been doing some research on how to install [ROM]KaosFroyo V30 on my Eris but i have not found any instructions or guide and so i was wondering if anyone here could help? by the way i am running the android 2.1 version released by Verizon an HTC and hopefully this won't be a problem.
Google is your friend, also the Eris root app might make things easier.
Sent from my FroyoEris using XDA App
first question is are you rooted?
i think the phone's rooted now!
well i used the eris root app and when it asked me to i used the KaosFroyo V30 zip and it seemed to install ok, then i boot up the device and after an initial boot screen i get a screen saying android in blue and like a white light inside i don't know if that makes any sense but that's where the phone stays. i guess i am rooted now but then phone won't fully boot up
ssvtcobra said:
well i used the eris root app and when it asked me to i used the KaosFroyo V30 zip and it seemed to install ok, then i boot up the device and after an initial boot screen i get a screen saying android in blue and like a white light inside i don't know if that makes any sense but that's where the phone stays. i guess i am rooted now but then phone won't fully boot up
Click to expand...
Click to collapse
The first boot can take 10+ mins. Wait it out.
well the phone boots pass the skatebording androids and then it shows "ANDROID" with a while light scrolling through the letters and is been like that for about an hour now.
ssvtcobra said:
well the phone boots pass the skatebording androids and then it shows "ANDROID" with a while light scrolling through the letters and is been like that for about an hour now.
Click to expand...
Click to collapse
Did you download goggle apps and flash that zip while in recovery after you flashed kaos v30?
Edit:does kaos have a google apps zip?
Funnyface19 said:
Did you download goggle apps and flash that zip while in recovery after you flashed kaos v30?
Click to expand...
Click to collapse
ok so this is what i did i downloaded eris root app i ran the app rebooted the phone as instructed by the app turned it off again then held down volume down and pressed power. then i chose recovery and from there instead of using the default zip file i used the "kaos v30" zip file everything installed well then i just rebooted the device. since then the phone doesn't boot completely it just says android and it just stays there.
ssvtcobra said:
ok so this is what i did i downloaded eris root app i ran the app rebooted the phone as instructed by the app turned it off again then held down volume down and pressed power. then i chose recovery and from there instead of using the default zip file i used the "kaos v30" zip file everything installed well then i just rebooted the device. since then the phone doesn't boot completely it just says android and it just stays there.
Click to expand...
Click to collapse
turn off, turn back on holding the end button and the vol UP, use the trackball scroll to backup/restore click the trackball, click nand backup, let it run hit vol down, scroll to wipe, wipe data and wipe dalvik, hit volume down hit flash zip click on the kaos v30 zip assuming that its on your sd card and let it run and then reboot shouldnt take much longer than 10 min to boot up
Thanks everyone for the help specially Funnyface19 your last suggestion solved my problem my phone is working great!
ssvtcobra said:
Thanks everyone for the help specially Funnyface19 your last suggestion solved my problem my phone is working great!
Click to expand...
Click to collapse
good luck and remember to always do a nand backup before flashing anything...saves more lives than seatbelts
The thing that you did different was wiping caches before flashing. That's why it works now.
BTW, NAND backups are important, but the one you made this time was worthless.
A NAND backup makes a copy of your system. Unfortunately your system wasn't functional when you created it.
Use this as a lesson. Always do a NAND before you change anything. That way you can restore to a working system.
Sent from my FroyoEris using XDA App
Hi guys I was messing around on the HTC DROID ERIS and I may have damage my phone. I change the wrong NV items. 435,436,1192,1194 and now phone keeps turning on and off. it only gets to the skate boarding green dudes. I try adding a custom rom but i dont think i am rooted. I try doing the system wipe but as soon as it reboots to enter that mode it reboots and reboots again same system. I can only update with the PB00IMG.zip but does not changes anything. I can only keep it stable on the hboot usb which I dont know what else to do with that. anyone has any idea on how to correct this issue...
So I have a fairly new Blue 9300 and it was working fine and then started not responding to my finger on the lock screen. Then I would try to use the power button to cycle the screen on and off and it wont work. Sometimes I can hold the power button and get the power off menu to appear and then sometimes it will respond and let me reset.
First Question: Anyone else have this?
Second: I think it may be due to flashing so is there a superwipe I can try?
Ok, what did you do prior to this, which Rom etc
slaphead20 said:
Ok, what did you do prior to this, which Rom etc
Click to expand...
Click to collapse
LoL
Not too much. Rooted it busybox super user. That's it. I did do a full backup from my white 9300 and restored to the blue 9300 but have since reflashed stock everything from Odin and still have bug. I restored through MyBackup Pro after the Odin reflash. I was hoping for some kind of super wipe to try and one last restore and then this bad boy is going back to Sammy I think :crying:
Edit
Mybackup restore was just call logs and sms mms no apps.
try a complete fresh Odin flash with no restore of anything and see how that goes, then if you are going to do a restore do a bit at a time if all is good, and see if that gives you any indication of where the problem may lie
slaphead20 said:
try a complete fresh Odin flash with no restore of anything and see how that goes, then if you are going to do a restore do a bit at a time if all is good, and see if that gives you any indication of where the problem may lie
Click to expand...
Click to collapse
Ok so I'm guessing no super wipe yet for sgs3. Never got the point of them but now I wouldn't mind. Should I do a factory reset and then odin restore? I think part of the issue was that I didn't do a reset before the Odin flash before. All My info was still there after Odin except my root haha
there is a super wipe app over in general, just be aware that this wipes sd card as far as I know
slaphead20 said:
there is a super wipe app over in general, just be aware that this wipes sd card as far as I know
Click to expand...
Click to collapse
Alright did wipe now I am doing restore through Odin. Hope it works if not Triangle Away will be the best $3 I ever spent
Ok I'm back to using the it (it's my loved pebble blue that I hunted down ) and it seems fine only issue I am now getting is a not responding on the Messaging app. This is kinda weird as this is one of the things I did restore. It happened right after the restore. When I go into the messaging app it does the same thing and force closes.
Just doing a sanity check: using TiBu to restore system data should work (in theory) so long as you restore data that has been backed up from the same ROM, correct?
Thanks for any help.
EDIT: Having power key problems, please see posts #3 and #16 for updated information.
In case it really backs up and restores EVERYTHING - theoretically you're right.
Practically, I'm not sure it's the case. Since you're restoring while running a ROM, I'm not sure you can get everything to exactly the same state.
Thanks for your help, but this question was hiding a bigger one.
So until today, my phone has been working just fine. I'm still running an old, now outdated and unsupported ROM: ShirshirROM pre-alpha ICS. It's been my daily driver for almost a whole year now, works perfectly with Entropy's old ICS kernel.
Yesterday, I got tired of shell errors with Superuser (which I had been dealing with since the latest binary update), so I finally switched to SuperSU. Everything seemed to work fine afterwards, though I noticed some trouble with the power button being a little wonky, i.e. showing up the power menu when I hadn't pressed it or not immediately responding.
Today, my power button doesn't work correctly at all. I tried wiping cache, dalvik, then restoring a Nandroid of the same ROM/Kernel combo from way earlier this year. Key test in CWM also shows that all buttons register when pressed, EXCEPT the power one. Otherwise phone functions are perfect; I can make calls, send/receive texts, etc, I just have to plug in my phone or have something happen for the screen to turn on, and then I have access to everything. My question is, is this (God forbid) a hardware failure? That would be my worst nightmare, seeing as I'm almost exactly one full year out from contract renewal, and I don't have a lot of money to spend on a new one, nor do I have nowhere near enough expertise to try to fix it myself. What can I do?
P.S. The TiBu question was because in case the Nandroid fixed the problem, I could just restore contacts and SMS from TiBu since it is the same ROM, and be back up and running immediately.
P.P.S. As mentioned, I can get into CWM. This is done by pulling battery, sticking it in, and holding all physical keys until boot screen shows twice. But I can't use the power key to select any options, I have to use home. And key test shows the power button not registering. I'm hoping that that means power key may still work, but that's just me praying this is fixable.
So this problem didn't occur at all prior to installing supersu ?
Phalanx7621 said:
So this problem didn't occur at all prior to installing supersu ?
Click to expand...
Click to collapse
No, as far as I recall. I'm not using supersu anymore since I'm on a Nandroid but power button still doesn't work. I have to find alternate ways of activating the screen, like plugging it into a charger or pulling the battery to restart :/
Sent from my SGH-I777
karate104 said:
No, as far as I recall. I'm not using supersu anymore since I'm on a Nandroid but power button still doesn't work. I have to find alternate ways of activating the screen, like plugging it into a charger or pulling the battery to restart :/
Sent from my SGH-I777
Click to expand...
Click to collapse
Run a Rom that will support siyah 4.3.3 or siyah 5.0.1 and enable swipe to wake.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Run a Rom that will support siyah 4.3.3 or siyah 5.0.1 and enable swipe to wake.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Is that my only option? How can I test for sure that it's a hardware failure and my power button is completely useless?
Sent from my SGH-I777
Full wipe and return to out of the box stock. If the issue persists, it's hardware.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Full wipe and return to out of the box stock. If the issue persists, it's hardware.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
After full wiping, if the problem is fixed I should be able to restore the Nandroid from earlier this year without retriggering it, right? Or is that out of the question now?
Sent from my SGH-I777
karate104 said:
After full wiping, if the problem is fixed I should be able to restore the Nandroid from earlier this year without retriggering it, right? Or is that out of the question now?
Sent from my SGH-I777
Click to expand...
Click to collapse
No one will know until you try it, as yours appears to be a unique issue if it is being caused by software/firmware.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
No one will know until you try it, as yours appears to be a unique issue if it is being caused by software/firmware.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
So I backed up stuff, then went ahead and flashed bone stock using the Odin3 One-Click from 2a in creepy's guide. I can't get past the initial setup wizard though, because Google Services Framework (process com.google.process.gapps), Calendar Storage (process.com.android.providers.calendar), and other Google apps processes keep force closing when I click the Android to start. I was able to boot into stock e3 recovery (again using three-button combo), but I can't select anything using the power key.
I didn't do a full data wipe/factory reset before flashing, and I can't get to the main menus to do so because my phone won't get past the setup wizard, which keeps crashing. What do I try next?
EDIT: I know that I was able to make selections using a CWM-enabled ICS kernel; home key functioned as select. I have the CWM-flashable zip, and I wanted to know if there's anyway to flash this kernel using Odin. I know it won't boot (custom ICS kernel with Gingerbread stock rom), but if I can get into recovery, I can use the home key to do a full data wipe/factory reset, then I'd Odin stock kernel+ROM again and see if that fixes things. So my question is, how do I flash a CWM-zipped kernel in Odin? (You can tell I never use Odin)
EDIT2: I'd still like to know how I can flash a CWM-zipped kernel in Odin, but I'm gonna hold off on it as it would trip the counter and I found out my phone is still under warranty, hooray! They're sending a refurb'ed replacement that should be here in a couple days, I can test that out and see if I can get me up and running again before I decide to do something really rash like trip the counter. It sucks cause I'm going out of town on Thursday but the replacement is arriving Friday, and I won't be back until next Wednesday. I'm stuck using my old iPhone 3G until then :/
I do know you can't flash this from Odim. You'll need another kind of file. Tar file... I don't remember.
Don't know where to find it.
I don't think you should back to stock. Just wipe and formating everything could test it.
Find an app that allow you to get recovery from android like rom toolbox lite.
Download mrRobinson AeSedai Aroma.
After formating and wiped everything, flash your rom and don't get out of recovery. Flash AeSedai just after. Flash gapps and KERNEL from AeSedai.
Must be an cm10 or aokp rom... Any rom from that source.
Sent from my SGH-I777 using xda app-developers app
RatusNatus said:
I do know you can't flash this from Odim. You'll need another kind of file. Tar file... I don't remember.
Don't know where to find it.
I don't think you should back to stock. Just wipe and formating everything could test it.
Find an app that allow you to get recovery from android like rom toolbox lite.
Download mrRobinson AeSedai Aroma.
After formating and wiped everything, flash your rom and don't get out of recovery. Flash AeSedai just after. Flash gapps and KERNEL from AeSedai.
Must be an cm10 or aokp rom... Any rom from that source.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
How would I format and wipe everything if I can't get past the setup wizard on bone stock 2.3.4? I can't install apps, make calls or texts, nothing. All I can do is select the language and make emergency calls. I can't wipe in stock e3 recovery either because the power button doesn't work.
I need a way to either Odin a kernel from which I can use the home button to make selections, or find some other way to remotely format and wipe my phone. Is there a way for me to put my phone in USB debugging mode so I can maybe use ADB? I can't access the settings menu...
Don't u use home button to select things in stock recovery?
Phalanx7621 said:
Don't u use home button to select things in stock recovery?
Click to expand...
Click to collapse
Nah, it's power key. I double checked again this morning. Oh, and I guess it's called 3e recovery, not e3 xD.
One other note, when pulling battery, then putting it back in, phone autoboots. I have to hold buttons then place battery in to boot to recovery, and for download mode, I have to have it plugged in, buttons held, then place battery in to get to download mode.
EDIT: Would anyone be willing to do me a huge favor? I want to find out if Entropy's DD GB kernel, the Odin-flashable tar one, can use home as select in CWM. Would someone be willing to temporarily flash DD_01242012 from here to check for me? It's a CWM zip, the changes are very tiny between it and the previous 01232012 Odin one. I just don't want to Odin it myself and trip the counter to find out it was useless, especially since I don't have a jig to reset the counter.
So an update:
While looking around for a way to root my new refurb model which came shipped with stock ICS, I found creepy's Stock ICS with root package, and I thought, "I told AT&T I was on ICS, I guess I should actually put ICS on my phone instead of leaving GB (UCKH7) on there. Maybe since I was on ICS before I can get past the gapps force closing too and do a factory reset from the settings menu." Sure enough, after flashing stock ICS, I was able to get past the darn wizard and toy with it. I do have problems of course: calendar still force closes, and the phone will randomly reboot after some period of using it. But at least I was able to access stuff.
My data was all still there, all pictures, contacts, settings, etc. I realized that before I do a data wipe/factory reset, I should heed the emmc superbrick bug warning and NOT do that with stock ICS kernel. I still had ES file explorer and root access, so I went in and manually deleted all data as much as possible, to make it look like my phone did have a factory reset done as I said to the AT&T representative. I've deleted wifi access points, browser history/cookies/cache, all contacts, texts, pictures/videos, downloads, all CWM zips and backups, all installed apps, all accounts that were signed in...
My newest questions are:
1) is there anything I'm missing that I should delete so that my phone does not look like it's been modified in any way? Also, any personal data I'm missing that needs to be deleted? I still have root access so I can delete anything I want.
2) Should I go ahead and risk the brickbug and actually do a factory reset/data wipe, or should I just let it be since I've deleted most things manually (and not potentially send them a useless brick lol)? Actually, since I'm rooted, I can install Mobile Odin to flash a CWM-enabled kernel, then wipe data/factory reset safely from there; that is, assuming my phone doesn't do a random reboot in the middle of flashing the kernel. I do run the risk of it rebooting while flashing and possibly bricking something else. So should I do that and take that risk, should I take the risk of wiping data from the stock kernel, or is there no reason to take either risk anymore?
3) Is there anywhere I can find a non-rooted stock UCLE5 ICS Odin-flashable tar, that I can flash before sending the phone back?
How about:
1. Flash back to stock GB
2. Wipe Data
3. Upgrade to stock ICS via kies or OTA
Sent from my SGH-I777 using xda premium
Red_81 said:
How about:
1. Flash back to stock GB
2. Wipe Data
3. Upgrade to stock ICS via kies or OTA
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks for your help, but I can't do that. If I could, I wouldn't be stuck in this predicament.
Power key doesn't work at all, but it is necessary to make selections in stock 3e recovery. Hence, I can't wipe from recovery, either on stock GB or ICS.
Stock GB rom doesn't boot past Setup Launcher due to gapps force-closes. These force closes prevent me from reaching the settings menu within stock GB to do a wipe there.
My two options for wiping data are using stock ICS ROM (under settings menu), or flashing a custom kernel using Mobile Odin, then wiping with the home key in CWM. Both are risky: stock ICS ROM uses the stock kernel to wipe, possible brickbug there. My phone currently experiences random reboots without warning; a reboot during a Mobile Odin flash could also brick something. My question is, should I do either one, or neither at all?
What about wiping through ADB?
Adb shell
Wipe data
Or
Adb recovery --wipe-data
Sent from my SGH-I777 using xda premium
Red_81 said:
What about wiping through ADB?
Adb shell
Wipe data
Or
Adb recovery --wipe-data
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Well, that previously wasn't an option on GB since I couldn't put the phone in debugging mode, but I can now in ICS so in theory it should work. The question now is, will the phone do one of its random reboots while I'm working with it in ADB...
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
So I was messing around with resolution and DPI settings. Changed it to 1920x1080 and 400dpi, rebooted. Now SystemUI crashes constantly and I can't do anything other than close the dialog window and use the power menu. Can't tap anything else (it shows Nova Launcher behind everything) and tried a USB mouse and keyboard via OTG, can't do anything extra with those. I feel like the keyguard is still on, but the same thing happens regardless of whether I do my knock code or a normal screen-on.
Safe mode doesn't help (other than disabling my 3rd party camera app allowing me to use the vol-down shortcut into the camera). I feel like if I could just get access to a root adb shell it would be pretty easy, but neither the stock recovery nor download mode allow for ADB.
I'd like to at least be able to pull smsmms.db so I can just flash back to stock and manually recover my messages.
(remind me to stop messing with things without TWRP or CWM or something...)
just ended up flashing back to stock and walking away with a lesson learned the hard way
Instructions on flashing back to stock?
Sent from my Nexus 5 using XDA Free mobile app
noutoo said:
Instructions on flashing back to stock?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2799647
scy1192 said:
http://forum.xda-developers.com/showthread.php?t=2799647
Click to expand...
Click to collapse
...or, just boot into stock recovery and factory reset (Power + Down(?) Button). Had to do this last nite when I over-froze in TiBu. Can't wait for custom recovery.
tbcpn said:
...or, just boot into stock recovery and factory reset (Power + Down(?) Button). Had to do this last nite when I over-froze in TiBu. Can't wait for custom recovery.
Click to expand...
Click to collapse
factory reset doesn't affect anything outside of /data, so it wouldn't have fixed my issue (I'm thinking the app I used put something in some sort of boot script since safe mode didn't work)
scy1192 said:
factory reset doesn't affect anything outside of /data, so it wouldn't have fixed my issue (I'm thinking the app I used put something in some sort of boot script since safe mode didn't work)
Click to expand...
Click to collapse
Yeah, I know that's generally the case, but in this instance it appeared to re-flash the entire /system...and, it wiped internal sdcard file, which is unusual, at least compared to "factory reset" in TWRP or CM. I'd inadvertently frozen a couple of critical system files in TiBu and bootlooped the phone.
In any event, solved my issue, but lost my TiBu backup on internal sdcard, which made for an extra couple hours work.
Can't restart my LG G5 anymore. Or shut down. Have to pull the battery.
Tried booting into recovery etc. The blue led just keeps flashing when I try to shut it off or restart.
Not sure when this started but I it could have been when I tried to choose something in some app(not sure which, maybe hravity box) like Fastboot(so it should boot up faster). Anyway, want to boot into TWRP to clean cache(don't know if it will help)
Never got it to work using Power+volume down to boot into revovery.
Can't boot into safemode or anything. Is it possible to boot into safemode using just buttons from poweroffmode?
Any tips?
Didn't try using adb command, I'm at work so can't try it right now.
Maybe factory reset?
I'm rooted and running Fluence HD patch and v10e. H850 international.
Someone help?
There are two ways ti recover a modded lg device:
1) Accessing to the custom recovery through combination, you can find it in autoprime's all in one thread, if the phone boots normally then you did something wrong and yours Have to Try again, the G5 should at Last arrive at the reset menu.
2) Accessing to the download mode, and flash the stock firmware with lgup, here is the guide: http://forum.xda-developers.com/lg-g5/how-to/lgup-international-domestic-g5s-t3407439
Good luck
Sent from my LG G5 using XDA Labs
molbor said:
Can't restart my LG G5 anymore. Or shut down. Have to pull the battery.
Tried booting into recovery etc. The blue led just keeps flashing when I try to shut it off or restart.
Not sure when this started but I it could have been when I tried to choose something in some app(not sure which, maybe hravity box) like Fastboot(so it should boot up faster). Anyway, want to boot into TWRP to clean cache(don't know if it will help)
Never got it to work using Power+volume down to boot into revovery.
Can't boot into safemode or anything. Is it possible to boot into safemode using just buttons from poweroffmode?
Any tips?
Didn't try using adb command, I'm at work so can't try it right now.
Maybe factory reset?
I'm rooted and running Fluence HD patch and v10e. H850 international.
Someone help?
Click to expand...
Click to collapse
If u have Xposed installer then reboot to recovery using that, it install quick reboot app from play store and give it root access... Let me know how that goes
Edit...
Just re-read... Are u saying u can't boot into recovery using the above mentioned process in your OP?
Pphish20 said:
If u have Xposed installer then reboot to recovery using that, it install quick reboot app from play store and give it root access... Let me know how that goes
Edit...
Just re-read... Are u saying u can't boot into recovery using the above mentioned process in your OP?
Click to expand...
Click to collapse
Doesn't work with quick reboot app either. Or twrp manager app. It doesn't even shutsoff using does app. The app crashes.
molbor said:
Doesn't work with quick reboot app either. Or twrp manager app. It doesn't even shutsoff using does app. The app crashes.
Click to expand...
Click to collapse
And your physical combination keys are absolutely not working? So what does your phone do when it won't shutdown? Is it still responding to user input?
Is your phone branded through a carrier? May I ask about your install process for 10e and Fluence v24?a log could be very helpful... I'm no good reading them but I could inquire with smarter people than myself or this could also force me to learn how to read them lol...
Use Google to learn how to grab a log of a specific process
If u could do that I would be very interested to see what is going on... But i understand wanting a fix ASAP; I suggest reinstalling firmware, recovery, and root using LG-UP then booting and backing up b4 using Fluence HD24 again.
But please grab a log... This is a unique problem
Pphish20 said:
And your physical combination keys are absolutely not working? So what does your phone do when it won't shutdown? Is it still responding to user input?
Is your phone branded through a carrier? May I ask about your install process for 10e and Fluence v24?a log could be very helpful... I'm no good reading them but I could inquire with smarter people than myself or this could also force me to learn how to read them lol...
Use Google to learn how to grab a log of a specific process
If u could do that I would be very interested to see what is going on... But i understand wanting a fix ASAP; I suggest reinstalling firmware, recovery, and root using LG-UP then booting and backing up b4 using Fluence HD24 again.
But please grab a log... This is a unique problem
Click to expand...
Click to collapse
Turns out I was doit the buttoncombination wrong. So I can get into twrp. Wipe cache but it didn't help.
Anymore tips?
When I try to restart or shutdown the phone it stops at black screen and blue LED flashing. Tried waiting like 3min but the blue led still flash, it doesn't shutdown.
Can I just reflash twrp or maybe fluence hd24 and keep all my apps. Tired off reinstalling everything. Been alot off that trying to fix the battery drain. ?
molbor said:
Turns out I was doit the buttoncombination wrong. So I can get into twrp. Wipe cache but it didn't help.
Anymore tips?
When I try to restart or shutdown the phone it stops at black screen and blue LED flashing. Tried waiting like 3min but the blue led still flash, it doesn't shutdown.
Can I just reflash twrp or maybe fluence hd24 and keep all my apps. Tired off reinstalling everything. Been alot off that trying to fix the battery drain. ��
Click to expand...
Click to collapse
No I would clean flash everything and reflash your twrp.img!
You prob already have reflashed by now but thought I'd throw in my two cents
Pphish20 said:
No I would clean flash everything and reflash your twrp.img!
You prob already have reflashed by now but thought I'd throw in my two cents
Click to expand...
Click to collapse
Yeah thats what I did. Everythings okey now. Running Genisys rom. Very nice but I still have the ****ing battery drain..
molbor said:
Yeah thats what I did. Everythings okey now. Running Genisys rom. Very nice but I still have the ****ing battery drain..
Click to expand...
Click to collapse
Genisys was good but stock and HD24 gives me insanely good battery life...
Lucky you. It's driving me insane trying to figure out this.
Thinking about changing phone but it seems not to be a LG problem, more an android problem. Just sick how some people get great batterylife and some not. Using greenify amplify and trying to get powernap to work. Gsam and BBS says its dozing and deepsleep etc. Still I get like 3% drain/hour.