Bought my atrix at radioshack and then rooted it and took it to the att store to see if i could use the webtop with wifi tether or by adding an apn. Didnt work. Wondering if someone can make a program like 3gunrestrictor to trick the atrix its connected to its own wifi connection somehow. Any thoughts?
I second this.
Sent from my Motorola Atrix 4g XDA app.
I was able to get it to work somehow.
Here is what i did:
1) Created the custom APN for free tethering as described here.
2) Under APN type i put the following: default,dun,tether
3) i made sure my wifi hostspot is working properly (to make sure i setup the APN correctly). Once confirmed i shut down the hotspot app.
4) connected the HD media dock and launched webtop - it tried to verify the connection and kinda got stuck there.
5) i then changed the APN from the one i created to a built in one called "AT&T US Tether". at that point Webtop got access to the internet somehow (an no i don't have a tethering plan, i have an grandfathered unlimited data plan).
6) I immediately switched back to my custom APN after i saw webtop passed the connection authorization stage and voila...it is online via 3G/4G. I know for sure that the webtop is connecting through the custom APN and somehow - it works.
clubtech said:
I was able to get it to work somehow.
Here is what i did:
1) Created the custom APN for free tethering as described here.
2) Under APN type i put the following: default,dun,tether
3) i made sure my wifi hostspot is working properly (to make sure i setup the APN correctly). Once confirmed i shut down the hotspot app.
4) connected the HD media dock and launched webtop - it tried to verify the connection and kinda got stuck there.
5) i then changed the APN from the one i created to a built in one called "AT&T US Tether". at that point Webtop got access to the internet somehow (an no i don't have a tethering plan, i have an grandfathered unlimited data plan).
6) I immediately switched back to my custom APN after i saw webtop passed the connection authorization stage and voila...it is online via 3G/4G. I know for sure that the webtop is connecting through the custom APN and somehow - it works.
Click to expand...
Click to collapse
+1 on this behavior...
Although I did not switch back to the custom APN, nor did I specify the APN type. I did go to the ATT website to check my existing plan and still shows unlimited data...
glad to hear you guys got it to work (haven't been able to get that method to work for tethering myself, can't change the MMS Protocol). ok, my dock arrives this weekend, one other question. can ATT tell if I'm going this (using custom APN) to enable tether for the laptop dock? I'm sure I'm not the only one who doesn't want to lose their unlimited data plan. I asked this question once already and so have a couple others buy have not seen a response.
I'd still rather have some sort of ios like app that tricks the phone into thinking its on wifi, but guess that's not possible.
AWESOME
Thank you so much! I also did not have to switch back to the ATT US network, just left it on the custom one described above and it worked beautifully... WITHOUT changing MMS Protocol because it doesn't even show up on my phone.
my account still says I've used 5932.13 MB of Unlimited.
also, I turned on mobile hotspot, and I'm able to share my phone's connection via wifi to my Mac, WHILE using webtop firefox browser on my Atrix Laptop dock... BEAUTIFUL.
thanks again!
glad its working for you guys, i'm still very anxious about att noticing this somehow.
Does changing this affect anything else when just using the phone? if I can the laptop dock working without changing anyway from my tethering plan I think I am sold. Can you post a couple ss of what your pan settings screens look like? Do you have to change back to the regular one to use the phone?
Related
Should Barnacle Wifi Tether work fine on the Atrix now that we have root?
It wont matter that att wants you to get there tethering plan?
Shouldn't be a problem.
Sent from my GT-I9000 using XDA App
This isn't exactly an answer to your question but they found a way to activate the native hotspot feature without rooting or adding a tethering plan. I included the link to the thread and the instructions found within it.
http://forum.xda-developers.com/showthread.php?t=961217
Menu - Settings - Wireless & NetworksMobile Networks - Access Point Names - Menu - New APN, Enter these settings:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC:310
MNC:410
Authentication Type: leave blank
APN Type: leave blank
Menu - Save, then select New APN (AT&T) You should see a green dot next to it, and it should be labeled under AT&T as wap.cingular. Go back to home screen and check internet connection is active. Once you verified internet is working, power off phone, then power on. Phone should still have active internet connection, if it does, you are done!
I prefer to use barnacle, because you can do MAC based filtering (default deny, with questions for allow every time). Has anybody tried Barnacle on the Atrix with root?
Joelpatrick said:
This isn't exactly an answer to your question but they found a way to activate the native hotspot feature without rooting or adding a tethering plan. I included the link to the thread and the instructions found within it.
http://forum.xda-developers.com/showthread.php?t=961217
Click to expand...
Click to collapse
What is the benefit of using the native ATT tether feature over barnacle? It seems to me that ATT would be more likely to discover your use of tethering if you use their native client and access points.
krkeegan said:
What is the benefit of using the native ATT tether feature over barnacle? It seems to me that ATT would be more likely to discover your use of tethering if you use their native client and access points.
Click to expand...
Click to collapse
Not to mention that I got faster speeds when using Barnacle than I did the blank AT&T APN - 4.26 Down / 0.33 Up using Barnacle - 2.70 Down / 0.29 Up on the APN tethering....
For those wondering how to get Barnacle since the stupid Android Market says "this item is not available for your carrier," a big F-U to AT&T on that one, just root your device and allow side loaded apps, then from your computer, go to:
http://szym.net/barnacle/
and download the direct link.... You'll have to manually update it though (if necessary, works great as is on the current 0.6.7 version), because even with using Appbrain, it shows up in the apps sync'd, but will not open the market app to update, when necessary.
Other ways to get Barnacle
GarciaM25 said:
For those wondering how to get Barnacle since the stupid Android Market says "this item is not available for your carrier," a big F-U to AT&T on that one, just root your device and allow side loaded apps, then from your computer, go to:
Click to expand...
Click to collapse
I don't have my Atrix yet (get paid on Monday), but on my current Streak, there are 2 ways to get Barnacle: Settings->Wireless & Networks->Mobile Network Settings -- Uncheck "Data enabled", then turn on wifi and download from the market.
The other (unconfirmed) option is to just use the Android web market: market.android.com . Search for Barnacle, install it there. It worked on my phone, but I had it installed previously. I don't think AT&T can block those installations, but I am sure they would if they could, so YMMV.
Barnacle not working for me.
For some reason, Barnacle Wifi won't even let my computer connect to it. It says it's sending out the signal, and my laptop is trying to connect but it just won't. My other smart phone won't even find the signal B.Wifi is sending out. The only thing that seems to work is using the native hotspot after following the instructions listed above. Just curious if anyone else is having an issue?
Wifi tether 3.0 works flawlessly
Sent from my MB860 using XDA App
Driggity420 said:
Wifi tether 3.0 works flawlessly
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I've tried this as well. All I get is my computer tries to connect, but never connects to it. I don't get it.
lorimer said:
I don't have my Atrix yet (get paid on Monday), but on my current Streak, there are 2 ways to get Barnacle: Settings->Wireless & Networks->Mobile Network Settings -- Uncheck "Data enabled", then turn on wifi and download from the market.
The other (unconfirmed) option is to just use the Android web market: market.android.com . Search for Barnacle, install it there. It worked on my phone, but I had it installed previously. I don't think AT&T can block those installations, but I am sure they would if they could, so YMMV.
Click to expand...
Click to collapse
Since the app doesn't need an update just yet, I can't confirm the first way you suggested. But I can definitely UNconfirm the second - that's where I got the text from that says it cannot be installed on our carrier. I almost always use the computer to search for apps as opposed to the actual Market app on the phone.
Was sitting in the passenger seat of a car going 80mph down the highway earlier and was getting a great connection with Barnacle the whole 3 hour trip. Love it, didn't even bother with the APN tether!
what kind of computer are you using. i have the Chrome CR-48 and it doesn't work because they can't connect to ADHOC networks. Tethering sets up an ADHOC network, not infrastructural like your Home Wireless Routers
GarciaM25 said:
Since the app doesn't need an update just yet, I can't confirm the first way you suggested. But I can definitely UNconfirm the second - that's where I got the text from that says it cannot be installed on our carrier. I almost always use the computer to search for apps as opposed to the actual Market app on the phone.
Was sitting in the passenger seat of a car going 80mph down the highway earlier and was getting a great connection with Barnacle the whole 3 hour trip. Love it, didn't even bother with the APN tether!
Click to expand...
Click to collapse
An easy way to bypass the Market check is to download MarketEnabler from the market and temporarily change the settings to another carrier (e.g. I tried Telstra). This will allow you install Barnacle directly from the Market.
I also find that Barnacle works flawlessly. The Native Hotspot feature also works with no problem. I have found however that the native hotspot requires high speed or it will not even start. Barnacle on the other hand will work when still within the Edge network if need be.
mjsztainbok said:
An easy way to bypass the Market check is to download MarketEnabler from the market and temporarily change the settings to another carrier (e.g. I tried Telstra). This will allow you install Barnacle directly from the Market.
Click to expand...
Click to collapse
Pretty cool, I'll have to try that, thanks for the suggestion!
Another satisfied Barnacle user here.
I am new to Android and when I got my Atrix the first thing I did was root it with SuperOneClick. I tried tethering it using the XDA's forum instructions for APN but couldn't get it to work. A friend of mine suggested Barnacle and I've been rolling ever since.
I was a little confused when my laptop showed the ad-hoc connection and symbol rather than a 'traditional' wifi network, but my connection is solid.
Now to wait on AT&T to do their thing and turn the psudo-4G switch on.
mjsztainbok said:
An easy way to bypass the Market check is to download MarketEnabler from the market and temporarily change the settings to another carrier (e.g. I tried Telstra). This will allow you install Barnacle directly from the Market.
Click to expand...
Click to collapse
This works PERFECTLY.... Just used T-Mobile (a little closer to home than Telstra is in Australia ) and updated Barnacle - will be doing this for any other "issues" AT&T throws our way......
I was able to install Barnacle as well as PDANET by
***WARNING*** Make sure you know your Moblur login information before proceeding. It was the account you created when you first got your phone.
1) Turn off the phone.
2) Remove the AT&T SIM card
3) Turn the phone back on(It will make you login to your Moblur account again)
4) Connect to your WIFI
5) Install Barnacle and PDANET from the Android store.
6) Turn off the Atrix
7) Re-install your SIM chip
8) Enjoy the applications
I have found that this will work with alot of apps that you cant DL from the store because of AT&T's policy's.
I was unable to manually update Barnacle after side-loaded, could you include the steps you used to manually update?
Thanks!
sivrais said:
I was unable to manually update Barnacle after side-loaded, could you include the steps you used to manually update?
Thanks!
Click to expand...
Click to collapse
Six posts up was the instruction, two posts up was me saying it worked to update the program - use MarketEnabler, it's pretty easy to use
I am still learning android...
I want to use tethering on my carrier in Venezuela, but when i try to enable hotspot it says i'm now allowed should call at&t and such... I know tethering and hotspot isn't the same, but i want to do the following:
-Enable personal hotspot on the phone to allow my laptop to connect to it and get connection (if somehow my home adsl connection drops and my phone is ok)
-Enable tethering over usb, so the battery doesn't suffer while being connected
I had to add my APN manually, a friend with the motorola milestone told me the apn name and settings and apn type is set on: default,dun
What are the possible values for this setting? I know from the tethering mod that it could be: default,agps,fota,supl,fota,tether. By the way we don't have tethering plans down here, do i still need this tethering mod? Because i haven't installed it.
would appreciate any input from you guys. I have searched google and there doesn't seem to be much info about apn types
franciscojavierleon said:
I am still learning android...
I want to use tethering on my carrier in Venezuela, but when i try to enable hotspot it says i'm now allowed should call at&t and such... I know tethering and hotspot isn't the same, but i want to do the following:
-Enable personal hotspot on the phone to allow my laptop to connect to it and get connection (if somehow my home adsl connection drops and my phone is ok)
-Enable tethering over usb, so the battery doesn't suffer while being connected
I had to add my APN manually, a friend with the motorola milestone told me the apn name and settings and apn type is set on: default,dun
What are the possible values for this setting? I know from the tethering mod that it could be: default,agps,fota,supl,fota,tether. By the way we don't have tethering plans down here, do i still need this tethering mod? Because i haven't installed it.
Click to expand...
Click to collapse
For WIFI tethering, have your phone rooted and to where you can side load, and try this: http://code.google.com/p/android-wifi-tether/
or this http://www.mediafire.com/?yzerk3nglqof1kk
(Not sure if the'll work because they didn't for me, but they did for other Atrix users)
And for USB tethering, thats easy, and for sure works. Try either Easy Tether (my favorite) : http://www.mobile-stream.com/easytether/android.html
Or PdaNet: http://www.junefabrics.com/android/
I managed to get this to work. I basically turned on hot spot then it loads up ands says connecting or something similar. Now put phone in flight mode. Then take out of flight mode. It should now connect. Worked for me. Im in the uk on hutchinson3.
Sent from my MB860 using XDA Premium App
trickyhenry said:
I managed to get this to work. I basically turned on hot spot then it loads up ands says connecting or something similar. Now put phone in flight mode. Then take out of flight mode. It should now connect. Worked for me. Im in the uk on hutchinson3.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
You don't get the message stating that you need to call at&t for the tethering plan?
franciscojavierleon said:
You don't get the message stating that you need to call at&t for the tethering plan?
Click to expand...
Click to collapse
Hi yes I do but I just click through. Tried it again just now and did not need the whole flight mode bit. Just worked.
Sent from my MB860 using XDA Premium App
ROM : VillainROM 3.0.0
Kernel : Ninphetamine 2.0.5
-----
After applying the fix for Hotspot settings to save in another thread (chown and chmod the /data/misc/wifi) I tried to turn on the hotspot, after all, this was inevitably what I got the phone for, H+ Hotspot.
Now I turn it on and the network appears in my computer, but if I try and connect to it, after I type in the security key, it comes up with "Connecting" and just stays like that permanently...
Eventually it sometimes says "Limited Access".
My phone does have internet connection, but why does it not work.
Does your network allow tethering?
Did it work on another rom?
Have you tried a hard reset?
I'm using tethering on VR but with speedmod kernel with no issues.
Sent from my GT-I9100 using Tapatalk
Does your network allow tethering?
Click to expand...
Click to collapse
+1
Orange in the UK for example use and APN on their SGS2 roms that doesn't allow tethering (you can set up a tethering connection no problem, but the network won't let you have any data).
They also lock the APN down so it isn't editable (insert rude word about Orange)!
You can get round the problem by adding another generic APN for all connections and using that.
i was having the same problem and struggled alll these days for solution. I used to get limited acesses and hence checked the ip4 & ip6 drivers connectivity for solution with no luck.
Then clicked on windows update, after update everything started working. So try to update your windows.
presently i am on turkbey ROM and it is working and also checked with sensation 1.9 and here tooo works!!!!!
Hey all, thanks for all your replies.
Network: 3
Plan: The One Plan +Tethering
Resolved: Yes.
For anyone else wondering how I fixed my problem:
1) Rebooted the phone
2) Rebooted my PC
3) Turned off the WiFi Adapter in my PC
4) Turned it Back On
5) Turned off WiFi on phone
6) Turned Hotspot on without any authentication
7) Worked on PC
8) Changed back to WPA2 PSK
9) Worked with Key.
<3
GlenH said:
+1
Orange in the UK for example use and APN on their SGS2 roms that doesn't allow tethering (you can set up a tethering connection no problem, but the network won't let you have any data).
They also lock the APN down so it isn't editable (insert rude word about Orange)!
You can get round the problem by adding another generic APN for all connections and using that.
Click to expand...
Click to collapse
I had wifi tethering working fine on Orange with SGS running Froyo 2.2.1, but have just upgraded my handset to SGS2 running Gingerbread 2.3.5 (stock XWKI8 firmware), and wifi tethering isn't working now.
As far as I can see I have exactly the same APN settings in my new SGS2 as in the old SGS, but maybe I need to use this new trick.
What do you mean by "adding another generic APN for all connections and using that"? If I add a new APN, what settings do I put in?
Thanks.
I have full 3G signal on my Samsung Galaxy S2, and I can easily use the browser on the phone to browse, as well as I am connected to Skype.
However the hotspot I am creating does not work for my laptop.
- My computer is connecting and gets an ip
- The android phone is still working
- I can create Open network or WPA2 PSK, yet none do any difference
- Even if I receive an ip address on the laptop, it still wont let me browse. It wont even let me browse on ip's, so its not even a DNS error.
I am out of options at the moment and I cant figure out what to do from here. I cant seem to find any solution anywhere, so XDA is my best hope.
And I even tested this from 2 different computers. One running Win XP another Win 7. None of them were able to connect (past) the hotspot.
DylanYoung said:
I have full 3G signal on my Samsung Galaxy S2, and I can easily use the browser on the phone to browse, as well as I am connected to Skype.
However the hotspot I am creating does not work for my laptop.
- My computer is connecting and gets an ip
- The android phone is still working
- I can create Open network or WPA2 PSK, yet none do any difference
- Even if I receive an ip address on the laptop, it still wont let me browse. It wont even let me browse on ip's, so its not even a DNS error.
I am out of options at the moment and I cant figure out what to do from here. I cant seem to find any solution anywhere, so XDA is my best hope.
And I even tested this from 2 different computers. One running Win XP another Win 7. None of them were able to connect (past) the hotspot.
Click to expand...
Click to collapse
There's some weird behavior on the native hotspot function. Are you using WPA2 encryption? Does it work with no encryption? (this is typical)
I read somewhere if you are using WPA2 encryption, and use an 8 digit password (must be digits - no letters, and has to be 8 long, exactly), then it will work.
did it ever work before? Is it possible that your carrier blocks tethering? Does usb tethering work?
It did not work with: no encryption either
However I will try now to see if it will work with WPA2 and 8 digits only.
Do you know of any app that allows me to fine tune the hotspot settings on the phone? I want to select more options than the two it gives me at the moment.
EDIT: Haha this is so insanely stupid. I am talking to Orange UK at the moment and apparently they have BLOCKED tethering!!! I am already paying for a 500MB package on my subscription but this does not include tethering. I have to pay another 4£ for 500MB which will be specifically for tethering. WTF! They are selling the same product twice????
EDIT 2: They are telling me that this is an Android block installed by Orange. Question is how I can get around this and use my existing 500MB. Does anyone know how this can be solved?
DylanYoung said:
It did not work with: no encryption either
However I will try now to see if it will work with WPA2 and 8 digits only.
Do you know of any app that allows me to fine tune the hotspot settings on the phone? I want to select more options than the two it gives me at the moment.
EDIT: Haha this is so insanely stupid. I am talking to Orange UK at the moment and apparently they have BLOCKED tethering!!! I am already paying for a 500MB package on my subscription but this does not include tethering. I have to pay another 4£ for 500MB which will be specifically for tethering. WTF! They are selling the same product twice????
EDIT 2: They are telling me that this is an Android block installed by Orange. Question is how I can get around this and use my existing 500MB. Does anyone know how this can be solved?
Click to expand...
Click to collapse
Yeah, lots of carriers do this stupidity. Just root and install wireless tether for root users.
Sent from my GT-I9100 using XDA App
ok so my evo is Boosted and ive been trying to get faster speeds so i said F%*(%& it and i had a clear account for my Gaming needs and now i got Comcast so i said let try and get my phone on this account and finally last night they took it as an ( INTEL HANDHELD DEVICE ) and it is stupid fast im happy but when i try to use the 4G hotspot its NO GO BRO! it gives an error saying
"
ATTENTION:
Our records indicate there may already be an account for this device or that the incorrect network provider was selected in the Connection Manager.
You will need to select the correct network provider from the list of available networks in the Connection Manager.
The Connection Manager is currently looking for any new network providers that may have been recently added. Please wait at least 3 minutes for this update to take place prior to performing the steps outlined below.
Note: If you still experience issues obtaining a subscription on your network provider of choice, it may be necessary to install an updated version of your Connection Manager.
If using the Intel PROSet/Wireless WiMAX Connection Utility:
Perform a "Wide Area Scan" to select the correct network provider. "
( and there is a big picture here with some signal and whatever ) then it says follow these instruction ???
"
Select Disconnect to disconnect from the current network provider.
Select Show Network List or "Show network list" to perform a Wide Area Scan.
Select Search Networks to search for available networks.
Select the network to which you are subscribed.
Select Connect to connect to your subscribed network.
Refresh or restart your browser to access the internet.
Follow the instructions of your connection manager to scan for additional networks:
Disconnect from the current network provider.
Follow the instructions of your connection manager to search for all available networks.
Select the network to which you are subscribed.
Follow the instructions of your connection manager to connect to your subscribed network.
Refresh or restart your browser to access the internet. "
and in the box with the picture it says something about intel ??? should i try and call back and tell them its a dell mini or can someone here help me PLEASE ADVISE! thanks to all
PS
if you have to move feel free i just put it here cause i felt that it was a development Question but maybe im wrong thanks and sorry
What on earth?
On your Sprint Evo 3D, you're trying to use
- Clear WiMax 4G (not Sprint's)
- on the Boost Mobile network
- with a Comcast modem
- to play video games
This makes absolutely no sense -- slow down, son! What exactly are you trying to do here?
If you mean you just want to get your 4G hotspot working (regardless of provider), you obviously shouldn't use the built in Sprint hotspot (even the hacked one). You're going to have to screw around with Wifi Tether for Root (google it) or Barnacle, potentially in ad-hoc mode. Some tools (including the official hotspot tool) and some tethering modes pretty much tell the WiMax tower to assign a new IP to the broadcast, effectively giving your computer or laptop a distinct IP from the phone. This is why they don't work, and it's also how the company finds out. Clear probably sees this secondary IP request produced by the tethering app, notes that it isn't the IP configuration you set up with them (or paid for), and blocks your service.
Your solution? Get the phone working again, then use a different form of tethering or a different mode. Ad-hoc mode (Barnacle) and wired tether (PDANet) are practically guaranteed to work, unless Clear has a way of sniffing packets for routing protocols.
curiousGeorge said:
What on earth?
On your Sprint Evo 3D, you're trying to use
- Clear WiMax 4G (not Sprint's)
- on the Boost Mobile network
- with a Comcast modem
- to play video games
This makes absolutely no sense -- slow down, son! What exactly are you trying to do here?
If you mean you just want to get your 4G hotspot working (regardless of provider), you obviously shouldn't use the built in Sprint hotspot (even the hacked one). You're going to have to screw around with Wifi Tether for Root (google it) or Barnacle, potentially in ad-hoc mode. Some tools (including the official hotspot tool) and some tethering modes pretty much tell the WiMax tower to assign a new IP to the broadcast, effectively giving your computer or laptop a distinct IP from the phone. This is why they don't work, and it's also how the company finds out. Clear probably sees this secondary IP request produced by the tethering app, notes that it isn't the IP configuration you set up with them (or paid for), and blocks your service.
Your solution? Get the phone working again, then use a different form of tethering or a different mode. Ad-hoc mode (Barnacle) and wired tether (PDANet) are practically guaranteed to work, unless Clear has a way of sniffing packets for routing protocols.
Click to expand...
Click to collapse
So what im running is HTC evo 3d on Boost Mobile and i added a Clear account its fast but when i tether it wont let me gives the error ? ive read your suggestions/instructions and im a bit lost so any more help you can provide is cool! PLEASE ADVISE! thanks
just use barnicle tether or wifi tether
they work fine with phones running on clear.
I know thats not a seamless integration but you can try custom roms as well....
I usually just use wifi tether it seems to be better for "boosted" phones
esp the ones i get on clear
Zarboz said:
just use barnicle tether or wifi tether
they work fine with phones running on clear.
I know thats not a seamless integration but you can try custom roms as well....
I usually just use wifi tether it seems to be better for "boosted" phones
esp the ones i get on clear
Click to expand...
Click to collapse
well thanks for the help but i am running custom thats all ill run! im on Steal25 now and ive used the android tether before and it just seems not to like me ive always had better success with the hacked sprint hotspot! but i am desperate as if i cant get it fixed then its no purpose to have the clear account as i got comcast at home but when on the go i'm N THE NEED FOR SPEED! also as far as Barnacles it's always worked great but i guess i forgot about it Either Way i am glad for the responses and input to this problem
PS
can you tell me what you connected your phone to clear as ??? mine is labeled a intel handheld device ? and when i hit the page it says something about INTEL??? please advise
The Sprint WiFi tether does not work with 4G (clear). You'll need to use WiFi tether or the others. Wi-Fi tether works great and it's free. Check the boxes that say MSS clamping and routing fix (something like that).
Sent from my PG86100 using Tapatalk 2
moonpie28 said:
The Sprint WiFi tether does not work with 4G (clear). You'll need to use WiFi tether or the others. Wi-Fi tether works great and it's free. Check the boxes that say MSS clamping and routing fix (something like that).
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
I dont like Moonpies but your A Real HUKELBERRY much love to you man it F^(&(*&ing WORKED!!!!!!!! i was just about to call CLEAR and just MOVE my USB stick back on the account and i read your response i tried it and BADA BING BADA BANG it WORKED thanks alot to you and everyone who responded!
BUT KNOW HERE'S the new HEADACHE how do i SPEED IT UP as on the phone im getting anywhere from high 3's to 10meg but tethering the fastest so far has been 680 kb's faster then my 3g tether but REALLY NOW WHAT I WANT OR EXPECTED so is there a way to speed it up cause the clear is really fast but if im still near 3g speeds when i tether i will have to go back to my usb device PLEASE ADVISE!