Just upgraded my M1000 to wm2003se using dcs's rom with the orange extrom and it is working fine.
Only problem so far is that the bluetooth headset today plugin disappears from time to time.
everything else works okay thou.
Was just wondering if anyone had combined windows media 10 into an extrom yet ?
Sorry Forgot to login before posting
Just upgraded my M1000 to wm2003se using dcs's rom with the orange extrom and it is working fine.
Only problem so far is that the bluetooth headset today plugin disappears from time to time.
everything else works okay thou.
Was just wondering if anyone had combined windows media 10 into an extrom yet ?
Re: Sorry Forgot to login before posting
steverae said:
Just upgraded my M1000 to wm2003se using dcs's rom with the orange extrom and it is working fine.
Only problem so far is that the bluetooth headset today plugin disappears from time to time.
everything else works okay thou.
Was just wondering if anyone had combined windows media 10 into an extrom yet ?
Click to expand...
Click to collapse
all the english work the same work for me, the BT headset on today screen will disapper from time to times, not only BT headset , other also
1 at a times.....
Hi, I have a XDA II TSM 500 (Telefonica) in Spanish versions:
rom 1.72.03 ESN
03/*15/04
1.10.00
1337.18
ext rom 1.72.102
And I have a parrot ck3100 but it doens´t work, I cant uase the parrot I have install the bt tools but nothing, bttools v10.12 and 11.00 but nothing, and the widcomm program but nothing, can someone help me?, must I upgrade the room? what rom?. Thanks
The parrot carkit is one of the few that support the BT headset profile. This profile is the only (speech) one the standard Himalaya roms support.
So . . .It should work. Afaik, you do have to configure the parrot in order to make it support the headset (instead of handsfree) profile.
I think this should be in the manual.
As from 1.72 roms there is NO NEED to use the Pocket Bluetooth Tools for these matters. Uninstall those!
The widsomm stack wont help either, because that one supports a lot of protocols, but it does not support the headset . . .
RE
Thanks but when I syncronice my XDA with parrot in the screen of parrot appear HEAD SET!! but dont appear coberture, battery, agenda, and I cant speek throught the parrot my radio versiono is 1.00, whan I configure the XDA II bluetooth I put the com4 and com5 enable is this right?, thanks.
RE
I tested It again, it puts HEADSET in the screen of parrot, whan I call from XDA II puts bluetooth headset is on but I it dosn´t work in parrot or in XDA II listen nothing, and the sincronice fails after 30 seconds, I downloaded 2 roms from here "windowsmobile2003se.exe", "RUU172601WWE.exe" must I put one of this?, thanks.
I bought a parrot driveblue, it didn't work . I called parrots office and they said me my version Rom 1.66.00 radio 1.10.00 wasn't high enough to work with driveblue, and I see that you still have the same radio 1.10.00. Isn't it that, your problem ?
Look edsub has a OS 1.72.00 and a radio 1.17.00.
If you change with your ESN by a WWE , be carefull with the country error code !
May be I'm wrong and this have nothing to see with your problem.
hi
TOMY00
PLEASE
use himegetdeviceinfo.exe on your device
and give me the informations you found on file devicedata
on windows directory on your pda
please
my device is dead
and i need the operator code from telefonica movistar
thanks
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Petermcc said:
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Click to expand...
Click to collapse
ck3000 here worked almost fine with MDA1, MDA2 (original) and MDA2 with wm2005. BUT no chance to change the volume of the loudspeakers. are you able to do this?
hi zendrui,
you have planned to put in some version of your SW, the utility that the BT switch on when we receive a call and switch off, when we suspend the call, is it this possible ?¿?
Especially for 9090
Thank you continue in contact, to see when you cheer up and you visit www.todopocketpc.com
Greetings
yup!!! http://www.bluetooth.jazztel.es/
thanks, but this is for 2020 oe tsm500 or XDA II, but not for XDA III, or 9090, or pda2k
Do you know anyone for Qtek 9090?¿?¿
Thanks
I bought a "Bluetooth GPS Receiver" and tried to connect it to my T-Mobile MDA II for my Tom Tom Navigator 5 for Pocket_PC. I had a difficulties for having connections and receiving information thru bluetooth. I read the MDA II manual and I need to accept the connection from GPS receiver and its seems's simple but I can't have any access and find any Bluetooth Manager nor Bluetooth Wizard from my MDA II. I have installed my Tom Tom navigator already but I cannot use it because of the connection between my MDA II and GPS thru Bluetooth.
Can someone help me out with this difficulties? I highly appreciate any response with this subject. I thank you in advance.
Kind regards,
Jhake
Hi to all,
First of all.... I've searched in all the HD2 forums and could'nt find my answer.
So I'm starting a new thread.
My problem is not a big issue but very annoying.
I'm having myself a HD2 since 2 weeks and I'ts not able to connect with my Parrot carkit. Also tried the parrot carkit in the car of a friend of mine and had the same problem.
My Touch HD didn't had this problem with all the rom's it has seen.
The HD2 is still running on the stock (dutch) 1.66 rom.
Anyone had the same problem?
Thanks in advance.
Grtz John
Hi,
I have a problem with HD2 and Parrot 3100 too.
Although it connects with my Parrot 3100 there are 2 annoying things:
1. My phonebook doesnot copy into Parrot
2. I have to pair devices and provide password each time i would like to connect my HD2 to Parrot.
I have no idea what is wrong.
Guys,
I've been searching and searching...... and found the solution on a Dutch forum.
Use a registry tool for example Total Commander of Phm Registry..
Go to:
HKLM\Software\WIDCOMM\Plugins\HandsFree
Take the item %u201CSupportedFeatures%u201D.
Change DWORD data from 1379 to 1085, safe and close the editor.
Soft reset your HD2.
Open your registry editor agian and take a look agian @ DWORD %u201CSupportedFeatures%u201D you've changed it to 1085 and it now shows 1081.
That's oke and should be this way.
Now go to your carkit remove all the paired devices en try to connect your HD2 with your Parrot. Now everything should work!
Grtz John