Hello all,
I do not have a lot of posts, so cannot post in the DEV thread.
Also I think it is good to discuss it separately not to spam the DEV thread.
For the ones having uppercase problems:
Press the text input box for some time and a popup will appear for input method. Use Android Keyboard. Done.
Several people asked is it ok for everyday use - yes it is. Using it for a week without problems. Got only a reboot twice by disconnecting the phone from the USB cable with 3.1. Do not get it now with 3.2.1. I got no random reboot so far, expect after FC with 3.2 and root explorer.
About the updates:
You can update all the time to copy the last package as update.zip to your sdcard and then running xrecovery 'install update.zip' method. When I first went from SE to Cyan 3.1 the phone stuck on reboot. Went to xrecovery and did a factory reset and the phone booted normally (with Cyan and not the SE stock).
If you check the contents of the .zip it's easy to understand what will get updated.
About current problems:
Besides the one described by owain, I get forced closed when the market starting to install any application and when running root explorer with 3.2 and 3.2.1 (which has no update regarding these). Also for root explorer I get a reboot after FC. With 3.1 both was working fine. I've seen some changes in the zips that I do not understand the reasons for (why ADWLauncher.apk and MarketUpdater.apk was totally removed from /system/app, things like that).
I will continue to report here if the thread will not get removed. Please try to be specific about your experiences to help the other users.
Thanks a lot,
arch
I try to create an inventory of exact issues and solutions below:
Issue #1: No uppercase
Solution: Press any text input box for some time and a popup will appear to choose an input method. Use Android Keyboard. Done.
Issue #2: There are no zoom buttons in the browser.
Solution: Go to settings within the browser, disable/enable zoom controls. They will be visible thereafter.
Issue #3: Market stoppes working in the moment after the installation of an application finishes (forced close).
Solution: None so far. Tried this (http://forum.xda-developers.com/showpost.php?p=11708912&postcount=479), but it was not working for me (caould not install Vending.apk). If someone could post exact steps to reproduce, it would be fine.
Issue #4: Root explorer gets a forced closed on restart. Get an 'SD card safe to remove message' and a reboot soon thereafter.
Solution: None so far.
Issue #5: Disconnect from a running PPTP VPN connection. Get an 'SD card safe to remove message' and a reboot soon thereafter.
Solution: None so far.
Issue #6: Keyboard backlight is still on after sliding back the keyboard.
Solution: It has some timeout. After a while, the backlight is switched off.
Issue #7: Sym(bol) button not working
Solution: After pressing it (blue+sym) press space and a pop-up will appear for selection. If you don't see the char you wish for, blue + long press the key which likely has it as an alternative (instead of pressing sym). E.g. long pressing blue + Z (which is 3) will give you 3, 3/4, 3/8.
hi everybody
it seems like we've got an incredibly smooth and fast rom so far. everything works flawlessly
I still have only 2 small (really small) issues:
1) changing language on a hardware keyboard. on a stock SE rom there was a tiny selection box on a screen. now there's nothing. I just can't change language on a hardware kb...
2) there's no zoom buttons in a browser.
is it bugs or just my stupidity? if someone will help me, I'll appreciate it a lot
bw, have anyone noticed the same things or maybe it's just my install ?
Market Mobile Networks ?
Hi,
market does not work when mobile networks is on.
What settings do I have to invite the Market.
E-Plus
LG Josef
Good idea to make the discusion for the low level ones
I have problemes with blue tooth. If i boot with bt aktivated ihave it but if i deaktivaate it and aaktivate it again in don t work
Anyone else have this prob ?
Sent from my U20i using XDA App
This my first post i think, but I've been watching this forum for a while for updates.. Thanks for making this post.. I was just going to spam the forum with posts so i could post in the development thread. But then i happen to find this thread.
Does anyone have the original camera apk? or would it NOT work?
The basic one on 2.2 is UGLY and not very good for the small screen. Also the file names are annoying.
I find the original one on 2.1 was alot better, it fit the screen better. Also i like how it saves the files as DSCxxxxx made it really easy to use.
Vignette takes way too long and does NOT flow well. (takes long to save photos + You can't press the camera button to get back to taking photos.
The original one on the 2.1 firmware flowed well and you could take pictures easily.
If not can anyone recommend an app that works just like it, or really similar?
sym key
Damn me... i see your thread just when i post a thread for the sym key... :-|
By the way, the sym key doesn't work as expected, it doesn't pop up special characters, special punctuation marks and emoticons selection (as it does in SE stock rom).
Anyone with the same issue?
ff0000.it said:
Damn me... i see your thread just when i post a thread for the sym key... :-|
By the way, the sym key doesn't work as expected, it doesn't pop up special characters, special punctuation marks and emoticons selection (as it does in SE stock rom).
Anyone with the same issue?
Click to expand...
Click to collapse
It's a known issue of this ROM. You can type special carakters like "ä" by (in this case) long pressing the "a", "ö" long pressing the "o" and so on.
for capital letters you have to do this:
kinglargo said:
Shift didn't work at start either but got fixed when I started to disable/enable stuffs in "Settings > Language & Keyboard" like "Android Keyboard" "HTC_IME mod" and "Default Input"..
Click to expand...
Click to collapse
Deehee3 said:
It's a known issue of this ROM. You can type special carakters like "ä" by (in this case) long pressing the "a", "ö" long pressing the "o" and so on.
Click to expand...
Click to collapse
I don't use those special characters, but symbols like '_', '"', '{', '}', '$', '%', '<', '>' and so on, should be very useful
Mark this as solved and mark me as idiot!
i've update my x10mini pro to Cyanogen 2.2.. im a brazilian and the keyboard layout is wrong.
here the /system/usr (http':'/'/'www'.'mediafire'.'com'/'?'5qr3vk5r50fnx1v') of brazilian 2.1.1.A.0.6..
and here, the keyboard http':'//'1'.'bp'.'blogspot'.'com'/_bl-dkgjBPqA/TQd_gMW-3fI/AAAAAAAAD5k/YSyLym8c_5A/s1600/'DSC_0297'.'JPG
can anyone help me?
PS.: I CANT POST EXTERNAL LINKS, SO PLEASE.. REMOVE THE '
I have notices that the Market is the old and not the Market that enabled all Resulutions
ff0000.it said:
I don't use those special characters, but symbols like '_', '"', '{', '}', '$', '%', '<', '>' and so on, should be very useful
Click to expand...
Click to collapse
first press "sym" and then the "space"...
i can`t install some apps which earlier worked good..such as angry birds,androzip,galcon,svox voices...
who has the same problems with this rom?
I still have some problems on market too
7.0
Guys,
let's wait for 7.0 and forget this version or accept for the next couple of days that market has an FC. Owain is going ahead like a machine...
Thread closed, cheers,
arch
Hi to all, this is one of my first posts here (maybe the first).
I've just installed this custom rom, i had some trouble with the market solved installing market.zip as suggested in the official thread of this CyanogenMod 3.2.1 and now it seems working fine.
I've just a question about the next apk installation... where install them? Or better, wich settings use?
I mean...
go in Settings > CyanogenMod settings > Application settings
have I to select "Allow application moving"?
And then change something in "Install location"?
By the way I prefer to install the applications in the sd card because of previous problems of full memory with Android 2.1.
Please tell me something about this question and sorry fo my poor english
so for me all is well done but bluetooth is still not working, only after the 1st boot
but after deaktivating und aktivating threre is no blutooth again.
Is there a fix posible ?
3.2.1b ROM
Dear all,
I put a 3.2.1b ROM here: http://forum.xda-developers.com/showthread.php?t=982489
Couldn't help much with application install, bluetooth, just checked and merged the sources from owain and nobodyAtall.
Have a nice day,
arch
As yet I can not post on dev, I'll put here, I hope you see,
I just want the original x10 mini pro portuguese From Brazil(PT-BR)
link below the keyboard, remove the spaces ok.
http ://stanasoft.com/site/images/x10_mini_pro_keyboard_pt-br.jpg
Andreson01 said:
As yet I can not post on dev, I'll put here, I hope you see,
I just want the original x10 mini pro portuguese From Brazil(PT-BR)
link below the keyboard, remove the spaces ok.
http ://stanasoft.com/site/images/x10_mini_pro_keyboard_pt-br.jpg
Click to expand...
Click to collapse
Please check out this Thread and install the sony erricsson Zip (Huge Download link) follow the instructions exactly!
HardWare Keyboard Thread
Yeah, support slade with his efforts on the keys!
Thanks a lot mate!
Related
Disclaimer
I am not responsible for any damage ... the regular stuff. So read instructions and you'll be fine
Click to expand...
Click to collapse
(credits go to HerrKuk) for keyprint.xml info
IMPORTANT:
Goto anywhere you need to input text. push long on the input box until the windows input methods appears chose Standardinput and now it will work. If you don't want to use the standard input method and want to use android one also flash the your hardware keyboard from the bottom this will enable you to use both keyboard input methods!. reselect your language. Do the same for Bopomofo Chinese Input method(optional download)
CM7 SE Keyboard update!!!
Hotfix for Word selection in dropdown (when using touchkeyboard) HOTFIX
Instructions
Download CM7 SE Keyboard
Download from CM6 your language
Download CM7 Hardware keyboard layout
Now install CM7 Keyboard
Install CM7 Hardware Keyboard
Install CM6 language
reboot
CM6 v3.3 and newer also for CM7 | Sony Ericsson original Keyboard
One Click on the thank you button would make my day!
AZERTY (French)
Spanish KeyboardSpanish Keyboard
CYRILLIC
LATIN-ON-CYRILLIC
GREEK
LATIN-ON-GREEK
LATIN-ON-ARABIC
LATIN-ON-ARABIC-AZERTY
LATIN-ON-BOPOMOFO
LATIN-ON-BOPOMOFOChinese Input Method for Bopomofo
LATIN-ON-HEBREW
LATIN_PINYIN
LATIN-ON-THAI
QWERTY-PT|BR)
QWERTY-EN | PT (ENGLISH) (Brazilian/Portuguese
QWERTY-NO-DK (Norwegian| Danish)
QWERTY-SE-FI (Swedish|Finnland)
QWERTZ (German)
CM6 3.0/3.1/3.2/3.2.1 Sony Ericsson original Keyboard
One Click on the thank you button would make my day!
AZERTY (French)
CYRILLIC
LATIN-ON-CYRILLIC
GREEK
LATIN-ON-GREEK
LATIN-ON-ARABIC
LATIN-ON-ARABIC-AZERTY
LATIN-ON-BOPOMOFO
LATIN-ON-HEBREW
LATIN_PINYIN
LATIN-ON-THAI
QWERTY-PT|BR)
QWERTY-EN | PT (ENGLISH) (Brazilian/Portuguese
QWERTY-NO-DK (Norwegian| Danish)
QWERTY-SE-FI (Swedish|Finnland)
QWERTZ (German)
Black Theme
credits to nobodyatall
Black Theme
Download your Hardware Layout and then select your language.
AGAIN OPEN i.e. SMS push long on the text input box until a menu appears, select choose inputmethod, choose standardinput, afterwards chose your language AGAIN! even if already the right one is selected
CM7 Keyboard Layout if using Android Keyboard input Method
German
http://www.mediafire.com/?pspwnzgb5byaxaj
Fully working Hardware Keyboard without german specific letters mapped on blue/sym button
http://www.mediafire.com/?fcno0917d13563l
Additional to first german layout also german specific letters mapper like "ä","ö", etc.
French
thanks KeitaroBaka
http://www.mediafire.com/?kde5dnyp6adph7z
French Keyboard layout with added é á etc ...
Swedish
thanks to owain94
http://21da275e.linkbucks.com/
Russian
thanks to owain94
http://8cef7e35.linkbucks.com/
Danish/Norwegian
thanks XabdullahX
http://c2ba60e3.linkbucks.com/
Greece
thanks owain94
http://a91f95d7.linkbucks.com/
Hungarian
thanks Thedy01
http://0efeda72.linkbucks.com/
Instructions
Place zip file on root of sdcard
Boot into xrecovery
goto flash custom zip
look for your zip file
click yes
reboot the phone
As for many of you having troubles with "shift" key not working. Touch the text input window and hold your finger on it until a menu appears, chose input methods, choose android keyboard and NOT the HTC one I don't know why but "shift" key will work again!
As I got a lot of requests regarding different hardware keyboards I'll like to start a thread in order I can build you guys custom keyboard layouts for your froyo or gigglebread roms. My goal is it to have all languages sooner or later updated and organized in this thread.
I need to the following from you guys so we can make the hardware keyboard work.
your qwerty.kcm.bin and your qwerty.kl from your old Sony Ericsson Firmware (/system/usr/) i need the entire folder with keyboard-config, keyboard-chars etc..
List your buttons and which button should have which character on blue/sym button and if you need capital letters as well which key should appear on blue/sym and shift button press
List you special signs, like underscore, plus,minus, etc .. even if you need a key frequently which is not on the default keyboard layout from sony we can still place it on a different button suitable for you
and last but not least any special requests, like numbers or so in the wrong place.
If you want to have an exact copy of your hardware keyboard as it is on your device (like the blue letters and number) please post a picture
As for many of you having troubles with "shift" key not working. Touch the text input window and hold you finger on it until a menu appears, choose android keyboard and NOT the HTC one I don't know why but "shift" key will work again!
I'll place all the keyboards in the second post for you once they are finished.
Change Log
v0.9 Hotfix CM7 less buggy now. only bug besides scroll down on sym menu is white color of text and list when selecting input language
v0.8 finally CM7 compatible but a bit more buggy than under CM6
v0.7 updated Spanish and SE Chinese Input Method for bopomofo (Its a different one than SE Standard Input Method)
v0.6 updated CM7 keyboards.
v0.5 updated all available languages!
v0.4 fixed bug regarding touch screen keyboard
v0.3 another fix for crashing
v0.2 fixed bugs in Sony keyboard so no workaround needed except above instructions
v0.1 new Sony Ericsson Keyboard
Known Bugs:
Sony Erricsson
SYM Menu sometimes does not respond. (workaround chose input method android, choose inputmethod standardinput again)
[in SYM Menü "Enter" does not work!] fixed in CM7 - still persistant in black theme
Black Theme might cause a force close in touch keyboard when trying to get dropdown menu
hi, i just want the original x10 mini pro Portuguese From Portugal(PT-PT) thanks
well as i do not speak pourtuguese do you have the original qwety.kcm.bin or something like that? or button mapping? thanks! (its in the list in 1 thread what i need)
you know what would be best just post a picture of your hardware keyboard. and i'll make the files for you
slade 87.
Good stuff man.
its guys like you who makes XDA what it is.
keep up the good work
Good thread, . I have one suggestion thought, I suggest you move all the keyboard layout submitted to the first post with thanks to the finder/inventor. That way people will easily find what they need.
yes of course i'll give the credit to the people who found it. Once there is more keyboard i'll start using external links, so we can divide languages from each other and also make it easier to give credit.
how do you get the qwerty.kcm.bin and qwerty.kl files? do u need to use root explorer or what? im new at this, sorry
hey, is it possible to put in german keyboard the old function from the sym/aü button. so if u press this button u will open the window, with smilies and special symbols?
luz1fer said:
hey, is it possible to put in german keyboard the old function from the sym/aü button. so if u press this button u will open the window, with smilies and special symbols?
Click to expand...
Click to collapse
I wonder the same about my Norwegian phone...
When I click the Sym button, it happends the same as on the blue button ...
It should be smileys and stuff there like , :-( , , , :O etc...
Thanks!
slade87 you got permission to post my files from cm topics here
i will delete the links from my post and i will link to this posted i think this is more up to date them mine are
as of now i don't think this is possible but we can map new letters to buttons so for example old german layout was:
sym button + o would make an "ö"
now i did the following blue/sym button + o makes "ö"
but not with touch input but with the hardware keyboard. so the most frequent letters we can reasign to a combo of blue/sym button and work with that.
owain thanks I'll update this thread day by day and slowly merge your existing keyboards into this thread. I will upload new version to mediafire as well and keep your old links if thats ok with you.
the why im asking that is, in connectbot for example i must use > or < but i cant find these symbols on the keyboard, coz these were under the menu witch opend with sym/aö ;>
check first post i got it working with the se menu!
slade87 said:
well as i do not speak pourtuguese do you have the original qwety.kcm.bin or something like that? or button mapping? thanks! (its in the list in 1 thread what i need)
you know what would be best just post a picture of your hardware keyboard. and i'll make the files for you
Click to expand...
Click to collapse
what you preffer?
the qwerty.kcm...? or the picture?
if you preffer the qwerty.kcm... please tell me how to get that for you...(im new in this android scene.. i preffer symbian s60 v5 modding)
i just need the keyboard becouz im my language(Portuguese from portugal) we have "Ç" and we use ´, `, ~ and ^ in some letters like "é"(is) in "Não"(this = no) and in "A" in some cases "à" or "á" and i need the < and > for my smiles :b
please check the first post and follow the instructions of the sonyerricon.zip (first link) you should have all your keys back.
okay with the sonyericsson.zip i got the symbols back on sym/äo but it seems instable with the sms/mms programm of cm6 3.2.1 coz i get forced closes Oo
did you reselect the language?
i don't know if it helps you but use xrecovery and download one of the other posted keyboard layouts, install it and then try it again. after i did this i had no more force closes. but in rare occassions the symbol menu did not work (touch did not respond) but it didnt force close i could still write my text just couldn't select an icon (and could get the menu away with pushing sym button again).
uey, i tried it with the french one, at the beginning no sym/aö symbole table, but than i hold the finger on the input and switch from standartinput to Androidinput, closed and do it again but now back to Standart input and it works. strange things are goin on here ;>
thnx for ur help and work
i am glad it worked!
I updated the link on the first post. this should work now without luzifers work around.
Hi everybody, i've googled around for this problem withoud finding any solution.
How can i edit the files in system/usr/ to make the keyboard like the stock one?
Examples:
if i press the blue button ONCE it should write ONE blue character only. instead it messe everything up and i have to press it several times to get the letters working.
the sym button doesn't work in either way (accented letters if pressed simultaneously with the letter or symbols menu if pressed alone).
etc..
i found this (http://forum.xda-developers.com/showthread.php?t=1113863), but it didn't help, and i can't post in that thread to ask for help.
i've seen that italian language file is present in /system/usr/keyboard-config/languages, but how can i make the phone use ita.xml instead of what's using now?
EDIT: i've seen now that i've started the thread in the wrong browser tab, i wonder if a mod may move this to Q&A. i'm sorry
EDIT2: problem solved, i had to change the option in the settings menu. strange that 3 different keyboard input methods were activated, it makes no sense to me.
i'd recommend to stiky a warnig to this fact so no one will be looking for a solution to a problem that doesn't exist
swedish hardware keyboard x10 mini pro
Noob here,
CynaNoComb 1.4 installed on x10 mini pro, can't get the HW keyboard to work with se-fi, tried both http://forum.xda-developers.com/showthread.php?t=982341 (3.3) and other suggested solutions.
Believe 1.3 had an app "cmmini ROM-something", which worked fine then,
Stuck here, thanks for any help, (and sorry if posting inapropriate, haven't fully figured out the structure of xda.)
regards,
Edit solved:
downl es file explorer
start esfe go to manage / security check both root and /sys as wr
edit /system/usr/keybord/keyprint.xml, change latin layout to qwerty-se-fi
save and reboot
exhale.
i have doubts i could not take of reading for HOURS and searching and reading... so here i am to try any good soul to answer me:
1 - how do i use SEUS to verify my firmware?????? Can u explain me pass to pass?
2 - i have froyobread CM6 in my mini pro... Kfix solved the leds problems in HKeyboard, BUT.... i can make it work in my language...
I am Brazilian, my language is Portuguese-BR. I tried to use the Mini Rom Manager to change the hardware keyboard layout but querty-br didn´t work... and it has no other language (i think so...) i can use as i need sym/ä and ç in my language...
can somebofy help me to solve it explaining me a pass to pass?
PLEASE?????????
3 - my virtual keyboard stops when i try to scroll it untill the end using the sym... some tip???
4 - how do i install java in the mini pro?
no answers
ok..... so as i have no answers... i continued trying to get info in the net...
i tried GingerDX, FroyoBread and now i am using CM7Pro for mini pro...
what can i say?????????
well... Froyobread i had no hardware keyboard working in portuguese brazil PT-BR...
i tryed Rom Manager but i got nothing working in the HK
i need to try another tips, but as i am a newbie i waste A LOT OF TIME to understand what to do with the files people post here.
GingerDX it´s awsome but i got no bluetooth working, no HK and no lED light in the HK, and Rom Manager didn´t work in the ROM... i got info about how to make Rom Manager work, but not fully and did not try as my bluetooth didn´t work and i got nothing about how to fix it...
i tried to reinstall the ROM in a fresh base, i tryied to wip it and restart several times... and GingerDX had bug for me in the touch screen and buttons i could not enter the ROM when the LCD turned off. And the Sym/àü key stoped work if i´d scroll it untill the end down. Yes,,, there was tip about how to fix it... but for me had so much problems i tried another ROM
Now i have Cyanogem miniCM7Pro V4. For now the only problem it´s the HK... i am AGAIN trying to find a solution.... everything else it´s working for now... but i need to do more tests.
Some more bugs... please guys.... help!
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
3 - no GPS
4 - no internet connection but the wifi is on !!!!
azhhael said:
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
Click to expand...
Click to collapse
Rom manager
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
Me too
3 - no GPS
Me too
4 - no internet connection but the wifi is on !!!!
And me too
so........... trying again
well... with so much problems i tried all again... what i am getting now:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know how.... does anybody know how???? Can give me a help????
more doubts..... help again
i am trying to get my old file as tells here:
you can browse an xrecovery file you already have and find the keyprint.xml , or find the keyprint.xml from an other rom you installed in /system/usr/keyboard-config and copy it to the sd card
with root explorer or any file manager that can explore your root
go to /system/usr/keyboard-config delete the existing keyprint.xml and paste the one on sd card
give the right permisions [x] [x] [ ]
____________________ [x] [ ] [ ]
___________________ [x] [ ] [ ]
(remember to mount write before you do anything on system)
reboot your phone
but i can´t cause it tells can´t find the file in CWM
i have ".img" files as backup done when i was with 2.1 android from SE.... i need to get the original HK file to test the tip... but i have no idea about how to get this now...
PLEASE HEEEEEEEEEEEELP
you sir, are a dedicated problem solver
i've added my stock rom keyprint.xml for you, hope that helps you
unzip that to sdcard and then just copy it over to the right system folder using root eplorer and setting the right permissions
---
As for the screen borders getting no touch input, the only cm7 version that wasn't the case with was minicm7-v14,5 by slade.
all other versions suffer from it
The symbol menu crashing when scrolling is a common froyo/gingerbread issue and can partly be solved with a workaround
if you go to cm settings > user interface and enable overscrolling and set it to bounce, the symbols menu in h/w keyboard won't freeze anymore. Except that doesn't work on the symbols menu in soft keyboard.
goodluck!
Hello Anderson... in my last post i told what i did that helped me to get the most problems solved in the ROM.... i´ll repost it here:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know
any doubt about it ask me, now i learned a lot!!!!!! auehuaehauehuaeh
and if you think i could help... and if the button appears to you, thank me in my post... :-D
cheers
Oh .... thak u so much for you good help, and for the file.
I tried to do all with the file you sent me, but i got no working HK in PT-BR yet....
this post tell what querty file for the correct language in the HK but i didn´t understand how to install the language...
http://forum.xda-developers.com/showthread.php?t=982341
can you help me? Maybe you may know how...
oh god, i think i did something really bad!!!!!!!!!!!
more questions... i found nothing explaning it in the forum... can somebody help?
I am with GingerDX v5 ROM
1 - when i plug my phone to PC, so PC Companion asks for "choose between charging, connecting and etc..." but there is not the option in the phone screen to do it... what do i have to do to connect???
2 - i had sony android 2.1 and i did a backup using xRecovery so i could install another ROM ... so... after that i formated my sdcard... lost all... but before it i did a backup. So i have inside this backup a folder called xRecovery > backup > 2011-08-02.02.29.25 >
nandroid.md5
cache.img
data.img
system.img
so, my question is: "is there a way i can recover my old android 2.1 with this files??? Or did i lost all...???
and... how can i open this "files" so i can get HK files from old 2.1 i had????
I knoe i have a lot of questions, but i can help too... i think so...
hello guys... i am really ansioous for your help about my last questions.
But for now let me tell what i got.
I Unzipped GingerDX v5 and unzipped pt-br files.... so, i copied these files to Ginger ROM and deleted the original ones. So, i zipped GingerDX again.
So, i wiped all in CWM and reinstalled GingerDx using my zip.
No, it´s all working as before, but the difference is that i have my HK almost ok. Now i have the right keys unless for the SYM key i can´t do it working yet.
Please, do u guys have any ideas?
And need the "popup bar" that appears in android 2.1 when u use the HK... that bar where we can change language and see is the we r using the numbers, or "big letters (?)" or "small letters (? oh... sorry for the bad english)".
I saw something about it in the GingerDX v6 thread but i didn´t understood nothing cause they talk to people who knows about the programing... it´s not a pass to pass... so, can some good soul help me about all these problems????
PLEASE....
I´ll attach here the file i used to replace HK files in GingerDX v5... maybe it can help if somebody can have a look at it about the SYM key and the popup bar...
hope u give me a help guys , i have nobody to ask for....
Can anybody help?
Hello XDA guys... i know you r busy guys, and really intelligent ones... cause waw.... i´d really like to know about programming as u.... but well, everybody has a talent and the mine is animation in computer graphics... if i can help you anyway about it... let me know... but
I need help!!!!!!!
please... guys, i believe my problems can help not just me, but more people here as i could see... and
Hi, I kinda solved the sym key by accident and i can't really tell how i did it but actually I just selected the keyboard i needed in mini rom manager and then i went into settings/keyboard and I unchecked all boxes.
After that I rebooted and I checked the boxes back and it worked. It may sound weird but the sym key works on my phone. I'm using paul's rom V4+hotfix.
Hope this will help you.
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
waw... weird...
Carpe-Dimi said:
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
Click to expand...
Click to collapse
it´s really weird that issue about sym key you did, Chucklechivers. hehehe
But... i am trying to reproduce that "issue" auehaueh.
And Carpe-Dimi...
I just got a little problem, or two:
1 -i use Ginger DX v005 ROM, i installed Mini Rom Manager v.5.2 from Slade but when i try to change the HK layout it tells me it´s not compatible with my device. So i tried to change the build.prop file as people tell here in XDA so MRM should be compatible... ok, that´s working. But when i try to change the language of my HK nothing happens after reboot... no changes. And a lot of features of MRM can´t work properly
2 - when i access the language and keyboard setting to set default input, it doesn´t exist in my ROM... i just have 2 keyboard in the Ginger DX v005: HTC and Android... no other.
About the overscrolling... can i set elastic overscroll and bright? or does it just works only in simple elastic mode?
so... any ideas, guys??? i am still searching for answers... if i thind any... i´ll put it here...
it might be that MRM can't change keyboard cause of the new keyprint.xml file u've used, but I'm not certain about that. and not all functions of MRM work on all phones and roms either.
í've added an apk for the standard input. using root explorer copy that to system/app (on your phone, remember to set r/w) and give it the permissions rw-r--r-- (read+write for owner, just read for the other two)
reboot and u should be able to select default input from the settings menu.
bounce and glow will work as well
Hello everyone. I'm a new TouchPad owner here, and a new member of precentral as well Having the TouchPad so far has been a great exerience, but I was a little ticked off that I could not read anything in Vietnamese when I come across websites such as yahoo.vn or vnexpress.net. Even youtube search in Vietnamese do not appear correctly, all I see is square box So I begin to dig around the net and found that HP decide to get rid of Unicode in all their fonts! Luckily I found this Vietnamese website who was very informative on finding how to add Unicode fonts to the TouchPad but was missing key fonts here and there, and applications wasn't working correctly without "stock" fonts. So without further adieu, here are the instructions to adding unicode fonts to your TouchPad! I believe these will only work for non-character asian sites, beside chinese.
1. Make sure your TouchPad has enough battery life, greater than 50%. Plug your TP into your computer or laptop, and set to USB mode.
2. Download this Unicode Fonts, and extract it as is to your TP drive on the computer. Note: Again extract as is directly to the HP TouchPad drive in your computer, not any other folder.
3. Disconnect USB mode by safely remove hardware, but leave the wire still connected. Turn on Developer Mode on your TP, and open WeOSQuickInstall.jar. You should know how to do this already, if not read up on it before proceeding!
4. Click on Tools, then Linux Commandline. Copy this command without quotes "mount -o remount,rw /" and paste to the window that appeared after you click on Linux Commandline, then hit enter on your laptop or pc. Do not do CTRL+V for paste as it will not work, you have to physically right click and select paste!
5. Copy this command without quotes "cp media/internal/HPbackupunicodefonts/*.* usr/share/fonts", and hit enter on your laptop or pc. Again, do not do CTRL+V, as I know a lot of people would love to do just that. Wait a few seconds until it finish and you see two lines displaying "[email protected]" Then you're done.
6. Remove the usb cord from your TP, clear cache out from your browser on your TouchPad (you should know how to do this already too, if not search here or google ) Reboot your TP completely, not luna restart, but complete restart it.
7. Enjoy
Mod please make this a sticky as I think it's necessary because this took me quite a few days of trial and error to find out what fonts were needed, and to have all games/apps to work! If anyone can, please spread this news out to your fellow friends and websites but please do not take sole credit for it.
Thanks all!
Xterminater
OP, did you get it from this website? http://www.tinhte.vn/hoi-dap-chia-s...ng-viet-cho-webos-3-0-2-updated-again-819453/
I used this, but there are some rare instances where it does not display correctly, it might have to with the type of input for vietnamese characters. Is yours the same as this or different?
Thanks OP, I am sure your post will be useful for other languages as well.
Since the instructions above is slightly incomplete here are a few pointers if you are lost.
1. developer's mode:
type webos20090606 on your touchpad's main screen's justtype search bar
turn on developer's mode, dont need to enter a password. When complete, restart your touchpad by holding power and main button
2. download webosquickinstall from here and run it from your PC. This will allow you to run command line from your PC when your touchpad is attached to the usb port in dev mode.
http://forums.precentral.net/canuck-coding/274461-webos-quick-install-v4-0-a.html
3. after you install the unicode, restart your touchpad by holding power & main button or your fonts will be all messed up in your browser.
I was successfully able to install this without any issues as of yet.
#5 in your instruction is wrong. it should be like this:
cp media/internal/*.ttf usr/share/fonts
#3 (after step 3, user need to use Novaterm in order to login as root in the shell).
thanks.
Novaterm for Windows link: http://tkgeisel.com/stuff/novaterm-1.zip
chagla said:
#5 in your instruction is wrong. it should be like this:
cp media/internal/*.ttf usr/share/fonts
#3 (after step 3, user need to use Novaterm in order to login as root in the shell).
thanks.
Novaterm for Windows link: http://tkgeisel.com/stuff/novaterm-1.zip
Click to expand...
Click to collapse
Why do you do media/internal/*.ttf if fonts aren't there? media/internal/FOLDER FONTS/*.* is right.
Plus, if you use webOS quick install, you have automatically root.
Best regards
Strange display for the keyboard
Thanks for the steps to install Unicode fonts. It works well before 3.0.4 update.
After the update one of the big key from the keyboard "A B C" changed to "A[]B[]C[]". When you pressed this key to change the character from "A B C" to "+ - =" there is space inserted with "[]" in between. Please kindly help me how to fix it. It's just the display of the keyboard changed from
"A B C" to "A[]B[]C[]"
or
"+[]-[]=[]"
I did re-add the fonts again and I even tried to run the WebOS Doctor to reset it, but the result is the same. Display some strange character for that key. Everything else works fine!
Any help to fix it would be highly appreciated. Thank you
So can anyone answer Willy's question regarding this issue post v3.0.4 update? I bought my father an HP Touchpad mainly to view Vietnamese websites (& YouTube, LOL) since he doesn't need tons of apps however, it's useless to him until he can view these sites. I'd like to load the Unicode instructions but not going to do so until this is resolved. Thanks!
Does anyone know where I could find these fonts? Megaupload is closed and there has been no mirrors posted anywhere for these fonts. Thanks.
Regards.
This huge mod is compatible with our Ray too.
I thought you guys could be interested:
http://forum.xda-developers.com/showthread.php?t=1908269
It should work with any kind of firmware.
Thanks
I wonder if this improves a rom like PAC, or that it will mess up securely chosen settings...
it's silent in this topic. anyone tried it with a JB rom like PAC?
i was trying...
A wonderful touchscreen interface will pop-up
(devices need different touchscreen calibration, if the touchscreen doesn't work, use the menu button of your device, select "Calibration Tools" and follow the instructions)
Click to expand...
Click to collapse
the installer appears (i have downloaded the hdpi files), I can press buttons, feel it vibrate, but it's not continuing to the selection fields.
when i make selections via the vol.up&down and menu button i can continue to the page where i can slect my rom.
the option GB is marked, and vibrating, and i cannot move the dot to my option "aosp based, JB".
so, i cannot move on. abort installation is all that's left.
where can i select this calibration tool? under menu there is only 'about' and 'quit (=abort)'
I haven't tried it yet; which version did you download? I think we should use the "HDPI Devices" one.
gabripranzo said:
I haven't tried it yet; which version did you download? I think we should use the "HDPI Devices" one.
Click to expand...
Click to collapse
2.1, hdpi
halfway the page I read this:
Having weird display / texture / ghost inputs issues with the installer ?
Then Open the version of PmR you downloaded, navigate to META-INF/com/google/android and delete the file called "update-binary", then download this file and put it there instead.
Click to expand...
Click to collapse
I replaced this file and tried flashing again.
this time no touchscreen on the aroma installer, but no flickering screen with errors.
i was able to make all selections via volume buttons and home button and am now testing...
wish me luck
So good luck
dreezz said:
I wonder if this improves a rom like PAC, or that it will mess up securely chosen settings...
it's silent in this topic. anyone tried it with a JB rom like PAC?
i was trying...
the installer appears (i have downloaded the hdpi files), I can press buttons, feel it vibrate, but it's not continuing to the selection fields.
when i make selections via the vol.up&down and menu button i can continue to the page where i can slect my rom.
the option GB is marked, and vibrating, and i cannot move the dot to my option "aosp based, JB".
so, i cannot move on. abort installation is all that's left.
where can i select this calibration tool? under menu there is only 'about' and 'quit (=abort)'
Click to expand...
Click to collapse
I got it working on pac. Just download the zip with the older aroma. You can then use volume buttons to navigate.
Sent from my Xperia Ray using xda premium
check #7, me too
first impression: stronger wifi signal and battery seems to last longer.
score on Antutu @ 806mhz: was about 3100.
after this mod: first 3000 and second time 3200+.
edit: after sleep my wifi is already on, in stead of reconnecting. + my wifi reconnected after leaving my wifi area and returning (before i had to turn wifi off and on before wifi turned on again). not thoroughly tested, but first impression is (very) good.
dreezz said:
check #7, me too
first impression: stronger wifi signal and battery seems to last longer.
score on Antutu @ 806mhz: was about 3100.
after this mod: first 3000 and second time 3200+.
edit: after sleep my wifi is already on, in stead of reconnecting. + my wifi reconnected after leaving my wifi area and returning (before i had to turn wifi off and on before wifi turned on again). not thoroughly tested, but first impression is (very) good.
Click to expand...
Click to collapse
how to make pmr working? I changed the "updater-binary-installer" but no luck. It stuck at GB and i can't choose JB AOSP.
Solved:
Having weird display / texture / ghost inputs issues with the installer ?
Then Open the version of PmR you downloaded, navigate to META-INF/com/google/android and delete the file called "update-binary", then download this file and put it there instead.
Click to expand...
Click to collapse
No touch screen, butit works.
Wechy77 said:
how to make pmr working? I changed the "updater-binary-installer" but no luck. It stuck at GB and i can't choose JB AOSP.
Click to expand...
Click to collapse
the file you can download from post 1 is called update-binary, not update-binary-installer.
replace the downloaded file in the zip, and flash.
worked for me.