Related
Follow instructions in Blue 1pm est
Step 1: Talk and Text
What you need:
A QPST
B. HTC Diagnostic drivers for the Hero
C A Windows PC with either win7, XP or Vista running in 32 bit mode (64 bit will not work)
e. Cricket's 01039.prl -- get it here
fast PRL change dial ##PRL# and phone will enter prl mode, just browse to your sdcard and select 1039PRL, hit menu to change prl. Phone reboots. now call *228 to activation and program. NOW SKIP TO STEP 2.
step 1 long route
1. Once you have all of the items above installed, go to your number pad on your ERIS and dial ##3424# and hit Call. You will see a screen come up on the ERIS called the "DM Command Service."
2. Now, plug in your phone via the USB and your computer should install the necessary drivers. These will be the drivers mentioned above.
3. Once they are installed, open QPST Configuration, Listed under the QPST Folder on your start menu.
4. Click Ports, then click "Add New Port". You should see a port in the left part of the window. If not, unselect the button that says "Show Serial And USB/QC Diagnostic Ports Only".
5. Select the port and Click OK. There may be several ports, so repeat this process until you see a port where it says "Surf..."
6. Take not of which port says Surf, then open CDMA Workshop. Do not close QPST Configuration yet.
7. On the right side of the window select the same port as was in QPST with the word "Surf..." next to it and click "connect".
8. Click on the Security Tab on the top of the screen and click "Read" under the SPC/User Lock, ensuring that the default setting is listed in the drop-down menu.
9. Select the 6 digit number it generates and copy it.
10. Go back to the QPST Configuration and click on "Start Clients" and click on "Service Programming".
11. It will come up with a window displaying active phones. You should see one, the Surf....(whatever). Select it and click OK.
12. Click "read from phone". It will ask you for an MSL/SPC Code. Paste the 6 digit code you copied earlier and click Ok. In the settings tab you will see a box for the MSL/SPC code. Replace whatever is written in it with six zeros (000000). Click "write to phone". Ignore any errors that occur.
13. Click The CDMA Tab. Under Directory Number enter your 10 digit cricket number.
14. Click The Display Tab and type "Cricket" in the Banner.
15. Click the Roaming Tab and click "Browse" under the Preferred Roaming box.
16. Find and select the 01039.prl that you downloaded.
17. Click Write to Phone on the bottom. Ignore any errors that occur.
18. Unplug phone and dial *228.
Step 2. Setting up Web
What you need:
The same programs and drivers listed above
Anycut.apk-- get it in the android market place VIA Wifi.
1. Connect Phone Via QPST and open Service Programming. (See steps 1-3, 10 above)
2. Once you have begun Programming, click "Read From Phone". It will ask you for an SPC/MSL code. That code should now be six zeros (000000) -see step 12 above.
3. Click M.IP (may be M.IPv6 and set Mobile IP Behavior as MOB + Simp...
4. Select any profiles (there should be 1 or 2) listed under User Profiles, and click edit. Do the following for all profiles.
5. Make sure that "Profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
6. Change home address, primary ha, and secondary HA to all zeros.
7. On both HA Shared and AAA Shared Secret, click enter text string and type in the following password (all lower case): cricket
8. click ok
9. Set active user as 0.
10. Click PPP Config
11. The "Um" Button
12. Under user ID enter [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter cricket in the password box.
13.Click "AN" Button and repeat step 12.
14. Click "write to phone". Ignore any errors that occur.
YOUR DONE NOW
NexT Follow instructions from the 3rd post. Below by Token419 to apply cricketmmsweb.zip in recovery for fully functional web/MMS/and apps
15. Install the anycut.apk mentioned above on your HTC ERIS. If you need help with that, pm me and I will explain a few ways to do it.
16. Open Anycut and click New Short Cut.
17. Click Activity and scroll down to Proxy Settings. Select it and Click Ok on the window that comes up.
18. Go to The home screen on your Hero and find the Proxy Settings on your hero.
19. For Hostname enter: wap.mycricket.com and for port enter 8080.
Step 3: MMS!
What you need:
a. Android SDK---
b. Modified Telephony.db --
c. Have Eris phone flashed for talk text and web (see above if you have not done this).
1. Unzip android sdk to a place where you can find it (the shorter the directory name the better as you will soon see. Mine is saved in C:\android
Also unzip the telephony.db into a folder where you can find it. Mine is saved in C:\android
2. In windows xp click start, then run, then type cmd and hit enter. In Vista or windows 7 click start and type cmd in the search and hit enter.
3. Navigate to the folder where you unzipped the Android SDK. If you are not familiar with the command prompt, I will make a list of the commands I enter in blue. The rest you see will be the text that will be generated by the command prompt: CD the directory of adb!!! ex. type cd hit space the drag the tools folder into cmd window. now you can adb push/adb pull etc.
4. Type the Following command
C:\android\tools>adb root
* daemon started successfully *
adbd is running as root
--------------------------------------------------------------------------------------
5. Send the Modified telephony.db to the phone with the following command (keep in mind that you will need to substitute the directory I am using for the one where your telephony.db file is located
C:\android\tools> adb push c:\android\telephony.db /data/data/com.android.providers.telephony/databases/telephony.db
85 KB/s (4096 bytes in 0.046s)
6. Unplug your Phone and hold the power button to turn it off. Turn it back on and there you go!
some roms arent allowing the telephony.db to work giving 245kb/s or any other like 130kb/s.
My advice is if you get one to work, do a Nandroid back up, so you will always have a working web browser and MMS.
Download link 1 Download Link 2
.....space.....
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
As promised here is a zip file containing 2 flashable zips:
One will handle the OS side to get Web/MMS up and running
The other will only do the web portion (Some people don't have good luck with the MMS that i did)
Download from the attachment below, or from here:
http://www.multiupload.com/EKQ8CC27Y9
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
token419 said:
your instructions/title look exactly like brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit also you may want to change the words "hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from cdma ws, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. I simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
as promised here is a single flashable zip that will hande the os side to get web/mms up and running
download from the attachment below or from here:
http://www.multiupload.com/lx7zvgloc2
as always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
so does the same process work for metro pcs and where can i get those files
Should work with any carrier so long as you know the proxy information and apn settings, in my zip you can modify the autostart.sh file and change the port numbers and ip addresses to match your carrier, then you can edit the apn to match your carriers settings as well and you should be good.
Im working on getting one for metro for you all, but i dont have all the info required and iv been busy with work, its really simple to do, i just haven't gotten around to it yet.
token419 said:
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
As promised here is a single flashable zip that will hande the OS side to get Web/MMS up and running
Download from the attachment below or from here:
http://www.multiupload.com/LX7ZVGLOC2
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Puxxie said:
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Click to expand...
Click to collapse
Sorry about that, i reuploaded the file as well as modified the attatchment.
Use at your own risk, there are 2 flashes inside the zip, one for web and one for Web+mms, some people cant get the MMS to work, works fine for me, but not sure why it doesnt work for others.
Make a nandroid backup first as always and feel free to mod it however you want
You don't need QPST, and it is in fact easier WITHOUT QPST
You don't need Windows Vista or Windows 7 (or windows at all).
Thank you for your contribution for this community.
I posted a thread for full functionality as well, with a different methodology.
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
You don't need QPST, and it is in fact easier WIT
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Click to expand...
Click to collapse
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
qpst wont read my phone any thoughts or links?
i tried everything
You don't need, QPST.
Just open up your phone, then dial ##778 (call).
ALL of the settings you need to edit in QPST are available in your phone's built in program, EPST.
bigslanki said:
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
bigslanki,
No flaming intended. I was being serious when I said thank you for your contribution. All I've done is copied and pasted things from other sources that have worked for me as I've tried them. I should edit it more fully and maintain it better. Thank you for your suggestion.
I haven't used QPST since the days of ##778 on this phone, and I was only suggesting that less tech-savvy people, who may have trouble getting QPST working just right in Windows, might have an easier time without it.
All is well. Thank you, seriously, for your contribution.
What is the newest/easiest way?
Looks like alot of advancements have been made in the last 3 or 4 months to make the process easier. Is this thread still the best way to get an eris setup on Cricket with full functionality?
Please help out a noob! I've read so many posts, tried so may methods...I think I am SOOOOO close! But I just can't get the web/mms working.
Thanks!
Will this work for HTC Incredible? I seem to be stuck. *228 calls cricket but a voice says they can not program my phone. I have tried nearly ALL the prl files for cricket available on the link. I can call 611 from it also and speak to a csr but that was little/no help..
Please change this to hero thanks
Web on Eris
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
EthicsDesign said:
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
Click to expand...
Click to collapse
If you have a 3g indicator in the notification bar of your phone (as long as you have Mobile Network turned on - hold the power button, and turn it on, if it's not on already), then you're ready to flash the web/mms flash.
Flashing the web/mms flash or ANY kind of flash from Recovery will NOT affect your talk/text abilities whatsoever. It can only enhance the ability of your phone to do things.
I recommend flashing the Cricket v10 flash from token419's thread here, then using APN Backup & Restore to backup your APNs, modify them, then Restore them to make MMS work perfectly:
http://forum.xda-developers.com/showthread.php?t=730289
Let me know where you get stuck, if you get stuck.
Here's what I did, exactly, to get my ex-gf's working 100%
http://forum.xda-developers.com/showpost.php?p=7665352&postcount=135
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
EthicsDesign said:
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
Click to expand...
Click to collapse
That's not true.
But if you go into the store, and ask for your Android phone to be on Cricket, then yes, you'll have to pay for the plan.
Otherwise, unless they're keeping inventory of customer provided equipment (which they never have before), you're fine.
In their notes they just have 'customer-provided equipment' listed, not HTC Droid Eris.
I wouldn't worry about it. My ex-gf has this going on, so we'll see. Sprint is $69.99 for a better/faster/more reliable network, so if Cricket does this, they might lose out to that, unless people really use the unlimited minutes.
Quick question. I am very new to the android unlocking scene but I have done a good amount of research. Step 1 of this guide shows us how to get text and talk working for cricket (and I'm assuming Metro as long as you load the Metro prl). What I want to know is Step 1 EXACTLY the same as getting MetroFlashed minus adding the esn to Metro's db?
The reason I want to know is because I got my phone MetroFlashed and set up data and mms. The next day I did a hard reset. Contrary to others beliefs doing so put me back on Verizon so I brought it back to be flashed again. Now I'm reading this and would like to know if Step 1 is all I need to do to get back on Metro in the event I need to do another hard reset for whatever reason.
Hello all,
I do not have a lot of posts, so cannot post in the DEV thread.
Also I think it is good to discuss it separately not to spam the DEV thread.
For the ones having uppercase problems:
Press the text input box for some time and a popup will appear for input method. Use Android Keyboard. Done.
Several people asked is it ok for everyday use - yes it is. Using it for a week without problems. Got only a reboot twice by disconnecting the phone from the USB cable with 3.1. Do not get it now with 3.2.1. I got no random reboot so far, expect after FC with 3.2 and root explorer.
About the updates:
You can update all the time to copy the last package as update.zip to your sdcard and then running xrecovery 'install update.zip' method. When I first went from SE to Cyan 3.1 the phone stuck on reboot. Went to xrecovery and did a factory reset and the phone booted normally (with Cyan and not the SE stock).
If you check the contents of the .zip it's easy to understand what will get updated.
About current problems:
Besides the one described by owain, I get forced closed when the market starting to install any application and when running root explorer with 3.2 and 3.2.1 (which has no update regarding these). Also for root explorer I get a reboot after FC. With 3.1 both was working fine. I've seen some changes in the zips that I do not understand the reasons for (why ADWLauncher.apk and MarketUpdater.apk was totally removed from /system/app, things like that).
I will continue to report here if the thread will not get removed. Please try to be specific about your experiences to help the other users.
Thanks a lot,
arch
I try to create an inventory of exact issues and solutions below:
Issue #1: No uppercase
Solution: Press any text input box for some time and a popup will appear to choose an input method. Use Android Keyboard. Done.
Issue #2: There are no zoom buttons in the browser.
Solution: Go to settings within the browser, disable/enable zoom controls. They will be visible thereafter.
Issue #3: Market stoppes working in the moment after the installation of an application finishes (forced close).
Solution: None so far. Tried this (http://forum.xda-developers.com/showpost.php?p=11708912&postcount=479), but it was not working for me (caould not install Vending.apk). If someone could post exact steps to reproduce, it would be fine.
Issue #4: Root explorer gets a forced closed on restart. Get an 'SD card safe to remove message' and a reboot soon thereafter.
Solution: None so far.
Issue #5: Disconnect from a running PPTP VPN connection. Get an 'SD card safe to remove message' and a reboot soon thereafter.
Solution: None so far.
Issue #6: Keyboard backlight is still on after sliding back the keyboard.
Solution: It has some timeout. After a while, the backlight is switched off.
Issue #7: Sym(bol) button not working
Solution: After pressing it (blue+sym) press space and a pop-up will appear for selection. If you don't see the char you wish for, blue + long press the key which likely has it as an alternative (instead of pressing sym). E.g. long pressing blue + Z (which is 3) will give you 3, 3/4, 3/8.
hi everybody
it seems like we've got an incredibly smooth and fast rom so far. everything works flawlessly
I still have only 2 small (really small) issues:
1) changing language on a hardware keyboard. on a stock SE rom there was a tiny selection box on a screen. now there's nothing. I just can't change language on a hardware kb...
2) there's no zoom buttons in a browser.
is it bugs or just my stupidity? if someone will help me, I'll appreciate it a lot
bw, have anyone noticed the same things or maybe it's just my install ?
Market Mobile Networks ?
Hi,
market does not work when mobile networks is on.
What settings do I have to invite the Market.
E-Plus
LG Josef
Good idea to make the discusion for the low level ones
I have problemes with blue tooth. If i boot with bt aktivated ihave it but if i deaktivaate it and aaktivate it again in don t work
Anyone else have this prob ?
Sent from my U20i using XDA App
This my first post i think, but I've been watching this forum for a while for updates.. Thanks for making this post.. I was just going to spam the forum with posts so i could post in the development thread. But then i happen to find this thread.
Does anyone have the original camera apk? or would it NOT work?
The basic one on 2.2 is UGLY and not very good for the small screen. Also the file names are annoying.
I find the original one on 2.1 was alot better, it fit the screen better. Also i like how it saves the files as DSCxxxxx made it really easy to use.
Vignette takes way too long and does NOT flow well. (takes long to save photos + You can't press the camera button to get back to taking photos.
The original one on the 2.1 firmware flowed well and you could take pictures easily.
If not can anyone recommend an app that works just like it, or really similar?
sym key
Damn me... i see your thread just when i post a thread for the sym key... :-|
By the way, the sym key doesn't work as expected, it doesn't pop up special characters, special punctuation marks and emoticons selection (as it does in SE stock rom).
Anyone with the same issue?
ff0000.it said:
Damn me... i see your thread just when i post a thread for the sym key... :-|
By the way, the sym key doesn't work as expected, it doesn't pop up special characters, special punctuation marks and emoticons selection (as it does in SE stock rom).
Anyone with the same issue?
Click to expand...
Click to collapse
It's a known issue of this ROM. You can type special carakters like "ä" by (in this case) long pressing the "a", "ö" long pressing the "o" and so on.
for capital letters you have to do this:
kinglargo said:
Shift didn't work at start either but got fixed when I started to disable/enable stuffs in "Settings > Language & Keyboard" like "Android Keyboard" "HTC_IME mod" and "Default Input"..
Click to expand...
Click to collapse
Deehee3 said:
It's a known issue of this ROM. You can type special carakters like "ä" by (in this case) long pressing the "a", "ö" long pressing the "o" and so on.
Click to expand...
Click to collapse
I don't use those special characters, but symbols like '_', '"', '{', '}', '$', '%', '<', '>' and so on, should be very useful
Mark this as solved and mark me as idiot!
i've update my x10mini pro to Cyanogen 2.2.. im a brazilian and the keyboard layout is wrong.
here the /system/usr (http':'/'/'www'.'mediafire'.'com'/'?'5qr3vk5r50fnx1v') of brazilian 2.1.1.A.0.6..
and here, the keyboard http':'//'1'.'bp'.'blogspot'.'com'/_bl-dkgjBPqA/TQd_gMW-3fI/AAAAAAAAD5k/YSyLym8c_5A/s1600/'DSC_0297'.'JPG
can anyone help me?
PS.: I CANT POST EXTERNAL LINKS, SO PLEASE.. REMOVE THE '
I have notices that the Market is the old and not the Market that enabled all Resulutions
ff0000.it said:
I don't use those special characters, but symbols like '_', '"', '{', '}', '$', '%', '<', '>' and so on, should be very useful
Click to expand...
Click to collapse
first press "sym" and then the "space"...
i can`t install some apps which earlier worked good..such as angry birds,androzip,galcon,svox voices...
who has the same problems with this rom?
I still have some problems on market too
7.0
Guys,
let's wait for 7.0 and forget this version or accept for the next couple of days that market has an FC. Owain is going ahead like a machine...
Thread closed, cheers,
arch
Hi to all, this is one of my first posts here (maybe the first).
I've just installed this custom rom, i had some trouble with the market solved installing market.zip as suggested in the official thread of this CyanogenMod 3.2.1 and now it seems working fine.
I've just a question about the next apk installation... where install them? Or better, wich settings use?
I mean...
go in Settings > CyanogenMod settings > Application settings
have I to select "Allow application moving"?
And then change something in "Install location"?
By the way I prefer to install the applications in the sd card because of previous problems of full memory with Android 2.1.
Please tell me something about this question and sorry fo my poor english
so for me all is well done but bluetooth is still not working, only after the 1st boot
but after deaktivating und aktivating threre is no blutooth again.
Is there a fix posible ?
3.2.1b ROM
Dear all,
I put a 3.2.1b ROM here: http://forum.xda-developers.com/showthread.php?t=982489
Couldn't help much with application install, bluetooth, just checked and merged the sources from owain and nobodyAtall.
Have a nice day,
arch
As yet I can not post on dev, I'll put here, I hope you see,
I just want the original x10 mini pro portuguese From Brazil(PT-BR)
link below the keyboard, remove the spaces ok.
http ://stanasoft.com/site/images/x10_mini_pro_keyboard_pt-br.jpg
Andreson01 said:
As yet I can not post on dev, I'll put here, I hope you see,
I just want the original x10 mini pro portuguese From Brazil(PT-BR)
link below the keyboard, remove the spaces ok.
http ://stanasoft.com/site/images/x10_mini_pro_keyboard_pt-br.jpg
Click to expand...
Click to collapse
Please check out this Thread and install the sony erricsson Zip (Huge Download link) follow the instructions exactly!
HardWare Keyboard Thread
Yeah, support slade with his efforts on the keys!
Thanks a lot mate!
I did this basic setup for my woot acquired GTAB. The primary reason was to keep the stock ROM but get the fully functional Android Market. I wanted to give these instructions out to real newbies who may want to do the bare minimum to keep their TAB up and running with all apps and without doing a flash with custom ROM. I wanted to include a more step by step for people who are less tech savvy so please bear with the details if you are a tech guy.
1. Get the Over The Air update to update to 3588. The OTA push happens automatically if you have connectivity (wifi is setup). You can also check it via the updates app that should have come with the stock ROM.
2. Download the enhancement pack - TnT Enhancement Pack v3.1.4b file from http://www.megaupload.com/?d=74HGJNEL to your desktop or laptop. The file name should be TnT_Enhancement_3389_v3_1_4b.rar
3. Try opening the file using winzip or any zip program. If it doesn't install winrar version available at http://www.win-rar.com/download.html.
4. Extract contents to a local folder on your computer using the zip/ winrar program. It has files update.zip, a recover folder that contains a command file
5. Connect your TAB to the computer with the min-usb cable and activate the usb transfer (I think it comes up with that option)
6. GTAB should show up as another drive in your system. With windows explorer browse this drive to locate the "sdcard" folder.
7. Copy the update.zip and recover (containing command file) folder from the location you extracted on your computer (step 4) into the sdcard folder identified on step 6.
8. Power off
9. Power on by pressing and holding the volume + button and the power button simultaneously.
10. The TAB should show a open box screen in a few seconds and after some time should turn back on to the main screen with new apps installed. You should see the market apps icon as well
11. Do the market fix remedy to see all applications in the market by steps below. I added an alternate market fix (if you don't see all apps)
a) Run market
b) Open settings->applications->system applications
c) Force close Google Services Framework, then Force Close Market
d Go back to Google Services Framework, then clear data
e) Run market and confirm you get an error
f) Reboot
g) Wait 2 minutes and try Market to get all applications
h) If this doesn't work, look at the directions again and make sure you follow them exactly
Alternate market fix Steps - I haven't tested this but looks like a few extra steps (You need Titanium Backup installed and have opened Market and surfed around a bit. Thanks to blackjaguar who pointed to this)
1. Settings->Applications->System applications->Market then Clear Cache (if any) then Force Stop
2. Go back one and then Google Services Framework then clear data then Force Stop
3. Go to home and open Titanium Backup
4. Select Backup/Restore tab
5. Select Google Services Framework
6. Select Wipe Data
7. Go to home and open market (it will error and close)
8. Reboot your tablet
9. Open Market and you will have full market
The above steps are detailed in another thread
The below steps are the bare action items from this detailed link
http://forum.xda-developers.com/showthread.php?t=885940 _ However I found it misses some things for the newbie. So this thread.
CAVEAT - I am still new to all this and this is my first HOWTO. Use at your own risk .
Thanks to all the hard working Devs at XDA especially Roebeet and rothnic. A lot of work has gone in creating these files.
Almost
I just got my gtab from woot and basically wanted the same thing you did: the stock gtab plus the market. I followed your directions after spending the last week reading the massive amounts of posts on this forum. The only thing I did differently was installing CWM between steps 1 and 2, and repartitioning to the recommended 2048/0. It seemed like most people end up having to do that at some point. Your market fix however, didn't work at all for me. There's another fix posted by tsm26 that worked great for me. Its slightly different:
http://forum.xda-developers.com/showpost.php?p=12563333&postcount=4400
The only app I still can't find in the market is Firefox, but luckily its available from ftp.mozilla.org.
EDIT: Just got the acore process problem, and had no contacts or /data/data folder at all. Used this fix and the problem is gone. Looks like it works for TnT Enhanced as well:
hipBob said:
from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
Click to expand...
Click to collapse
blackjaguar said:
I just got my gtab from woot and basically wanted the same thing you did: the stock gtab plus the market. I followed your directions after spending the last week reading the massive amounts of posts on this forum. The only thing I did differently was installing CWM between steps 1 and 2, and repartitioning to the recommended 2048/0. It seemed like most people end up having to do that at some point. Your market fix however, didn't work at all for me. There's another fix posted by tsm26 that worked great for me. Its slightly different:
http://forum.xda-developers.com/showpost.php?p=12563333&postcount=4400
The only app I still can't find in the market is Firefox, but luckily its available from ftp.mozilla.org.
EDIT: Just got the acore process problem, and had no contacts or /data/data folder at all. Used this fix and the problem is gone. Looks like it works for TnT Enhanced as well:
Click to expand...
Click to collapse
I am going to update this with alternate market fix for anyone who is interested. Thanks.
Step 6 confused?
Just received my gtab and following your steps to install this upgrade, however after connecting gtab to laptop I see 4 folders at the root of "E:" when browsing through windows. I assume that "E:" is the sdcard directory and these folders are located in it. The folders I can see in this directory under the windows "E:" drive are - .android_secure, Android, DCIM & LOST.DIR. However if I browse to the "sdcard" folder using the file explorer on my gtab I don't see the .android_secure folder, but do see a folder called "update.zip", that I don't see when browsing the "E:" drive in windows. Now I am really confused? Do I delete or rename the "update.zip" directory currently residing in the "sdcard" directory on the gtab and then copy over the recover and update.zip folders that I just downloaded?
My tap ui version is 1.1-3389.
Are there any suggestions?
I think you need to disable the USB sharing and you will see the files.
This worked like a charm. I decided not to root and mod, at least for now, so getting the market is great. I didn't show the sdcard directory, but I had update and an empty recovery directory, so I just replaced them (after copying the old update.zip). It wiped out the photos and videos apps on my main screen, but I found some interesting replacements. And the market fix worked great too.
But I still can't find Words With Friends... Just checked the market from my laptop and it thinks it's not compatible with my device. Oh well.
I followed the instructions to the T and the market wont work... someone please help!!!!!
The first set of instructions did not work for me, but the alternate set did work. I now appear to have a full market. Awesome!
Just for the record, I am running the stock ROM updated to the latest VS release.
EDIT: Whoops, spoke too soon. No apps will download from the Market. When I try to download a free app, I get a "Starting download..." message but that's it. I'm also doing this at work... I think port 5228 might be blocked. Is this the reason? I will attempt from home tonight...
Help!
gunajay said:
10. The TAB should show a open box screen in a few seconds and after some time should turn back on to the main screen with new apps installed. You should see the market apps icon as well
Click to expand...
Click to collapse
I've gotten to this point, but how long is some time, it has never turned back on to the main screen and now really won't boot at all, just goes to a blank screen and sit there.
Any ideas? Any help would be appreciated! Hope I haven't done something terribly wrong!
Spoke too soon?
Maybe I spoke too soon. Doing the market fix got me a lot more on the market, but there's still a lot of apps that I can't get. So many devs put their apps in market and nowhere else. Don't they realize that this is not itunes? (BTW, I've hit web sites that send me to itunes to download their apps...) How many other devices has google not approved for the market and are stuck like this? Even Firefox is undownloadable on my Android. Is that really the market fix or should I be able to access more?
So frustrating, but finally something seems to work
OK, new theory. Apparently I had to do the market fix twice. I also followed the video on this post:
http://forum.xda-developers.com/showpost.php?p=9817939&postcount=17
That's not the gtab, so it looks a little different in the menus, but the steps still worked. I guess it threw in an extra step of clearing cache on market and force stopping it before stopping google services framework. Well, Firefox doesn't show up in market, but so far everything else does. Now I have to try to remember everything I've been trying to download.
I had to do the Market fix twice, but that was no sweat.
Perfect, gunajay; thank you very much for your concise directions.
gunajay said:
I did this basic setup for my woot acquired GTAB. The primary reason was to keep the stock ROM but get the fully functional Android Market. I wanted to give these instructions out to real newbies who may want to do the bare minimum to keep their TAB up and running with all apps and without doing a flash with custom ROM. I wanted to include a more step by step for people who are less tech savvy so please bear with the details if you are a tech guy.
1. Get the Over The Air update to update to 3588. The OTA push happens automatically if you have connectivity (wifi is setup). You can also check it via the updates app that should have come with the stock ROM.
2. Download the enhancement pack - TnT Enhancement Pack v3.1.4b file from http://www.megaupload.com/?d=74HGJNEL to your desktop or laptop. The file name should be TnT_Enhancement_3389_v3_1_4b.rar
3. Try opening the file using winzip or any zip program. If it doesn't install winrar version available at http://www.win-rar.com/download.html.
4. Extract contents to a local folder on your computer using the zip/ winrar program. It has files update.zip, a recover folder that contains a command file
5. Connect your TAB to the computer with the min-usb cable and activate the usb transfer (I think it comes up with that option)
6. GTAB should show up as another drive in your system. With windows explorer browse this drive to locate the "sdcard" folder.
7. Copy the update.zip and recover (containing command file) folder from the location you extracted on your computer (step 4) into the sdcard folder identified on step 6.
8. Power off
9. Power on by pressing and holding the volume + button and the power button simultaneously.
10. The TAB should show a open box screen in a few seconds and after some time should turn back on to the main screen with new apps installed. You should see the market apps icon as well
11. Do the market fix remedy to see all applications in the market by steps below. I added an alternate market fix (if you don't see all apps)
a) Run market
b) Open settings->applications->system applications
c) Force close Google Services Framework, then Force Close Market
d Go back to Google Services Framework, then clear data
e) Run market and confirm you get an error
f) Reboot
g) Wait 2 minutes and try Market to get all applications
h) If this doesn't work, look at the directions again and make sure you follow them exactly
Alternate market fix Steps - I haven't tested this but looks like a few extra steps (You need Titanium Backup installed and have opened Market and surfed around a bit. Thanks to blackjaguar who pointed to this)
1. Settings->Applications->System applications->Market then Clear Cache (if any) then Force Stop
2. Go back one and then Google Services Framework then clear data then Force Stop
3. Go to home and open Titanium Backup
4. Select Backup/Restore tab
5. Select Google Services Framework
6. Select Wipe Data
7. Go to home and open market (it will error and close)
8. Reboot your tablet
9. Open Market and you will have full market
The above steps are detailed in another thread
The below steps are the bare action items from this detailed link
http://forum.xda-developers.com/showthread.php?t=885940 _ However I found it misses some things for the newbie. So this thread.
CAVEAT - I am still new to all this and this is my first HOWTO. Use at your own risk .
Thanks to all the hard working Devs at XDA especially Roebeet and rothnic. A lot of work has gone in creating these files.
Click to expand...
Click to collapse
Everything is working great using this Enhancement Pack and Market Fix. My question is whether my gTab is still considered stock with these changes? The forum messages about the new firmware update all caution against applying it if you are running an alternate firmware from 3588. I don't know if I am under the Enhancement Pack and Market Fix scenario or not.
no sdcard - help please
Hello all, found this post and as a complete newbie I was excited to see what the GTAB could be transformed into. Not quite ready for custom ROMS so I figured I'd start with Clockworkmod and trying to install the standard android market.
Problem is when I hook up my gtab I don't see an "sdcard" folder... Anybody have any ideas why that would be? How do I work around it?
I have the following folders:
.android_secure
Android
clockworkmod
DCIM
download
kindle
LOST.DIR
Master
Music
Photos
recovery
Videos
update.rar
Thanks in advance for your help!
Will this work with 4349?
Does anyone know if gunajay's instructions will work with with Stock 4349 and Market?
andasolo33 said:
Hello all, found this post and as a complete newbie I was excited to see what the GTAB could be transformed into. Not quite ready for custom ROMS so I figured I'd start with Clockworkmod and trying to install the standard android market.
Problem is when I hook up my gtab I don't see an "sdcard" folder... Anybody have any ideas why that would be? How do I work around it?
I have the following folders:
.android_secure
Android
clockworkmod
DCIM
download
kindle
LOST.DIR
Master
Music
Photos
recovery
Videos
update.rar
Thanks in advance for your help!
Click to expand...
Click to collapse
SDCARD is the folder that is mounted on your computer when you connect via USB. The list above are the contents of your SDCARD.
Doh. ;-) That worked. Thank you very much for the explanation K J Rad!
I have been trying to change the Google option under Just Type to use google.co.uk on my Touchpad (in the UK).
After a bit of searching through the config files, I presumed it would be a matter of changing the reference in /usr/palm/universalsearchmgr/resources/en_gb/UniversalSearchList.json as that file also contains the reference to amazon.co.uk and the other standard search options.
However, even having changed that, rebooted, cleared browser cache, selecting Google in Just Type still goes to google.com and gives me US references first.
Has anyone got any idea what I am missing or have I got the wrong file?
OK, I can now answer my own question after some further searching on the internet. It seems this has been documented on PreCentral in the past.
Just editing the localised file in /usr/palm/universalsearchmgr don't complete the change. To finish things off and get the TP to re-read that file, I needed to delete the universalsearchprefs.db file in /var/luna/preferences and restart.
Do you mind linking to the thread, hopefully there is a quick guide that I can follow as I need to change mine to UK to....
Thanks.
I got the basic information from here:- http://forums.precentral.net/hp-touchpad/298297-just-type-browser-google-settings.html#post3160050
However, in the end, I did everything just using Internalz Pro (after loading that with Preware). It was a case of editing /usr/palm/universalsearchmgr/resources/en_gb/UniversalSearchList.json (after saving a copy) and then deleting /var/luna/preferences/universalsearchprefs.db and then rebooting the TP.
How did you edit UniversalSearchList.json? If I navigate to it with Internalz & try to open it I get a blank Impostah window that just hangs.
I just set Internalz to Master Mode in the Preferences (at the bottom) and I could edit. I am not running Imposter so don't know if that has an effect.
thanks for this info, this was bugging me and your fix has worked a treat
cheers
Dan
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom，但無法搜索香港電視信號。如何將ATAC轉換為DTMB？
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all