Related
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
I was using 'MIUI Xperia by TripNaVeR v1.4.0
i decided to uninstall it because i couldn't send messages or call so then i went on xrecovery mode and did a full wipe.
Partition Tools => Format /system
Partition Tools => Format /data
Partition Tools => Format cache
Advanced Options => Wipe Delvik Cache
Advanced Options => Wipe Battery Stats
when it told me to reboot, i rebooted and then the logo got stuck.
I tried plugging my xperia x10 in the usb slots then went in Sony Ericsson PC Companion and it says that my phone isn't connected. I searched to my fullest but unfortunately, i couldn't find a solution how to fix it. for the past 2 weeks it didn't work and mum and pups couldn't do anything about it.
Sorry, but i'm just... frustrated. please please please help me.. i beg you. Well, not just me but other people that are having this problem too..
Download a stock firmware from here.
http://forum.xda-developers.com/showthread.php?t=872298
And flashtool from here.
http://forum.xda-developers.com/showthread.php?t=920746
Follow the instructions from 1st post.
Sent from my X10 using XDA App
Couldn't you just use SEUS
Sent from my X10i using XDA App
lylyhoanggg said:
I was using 'MIUI Xperia by TripNaVeR v1.4.0
i decided to uninstall it because i couldn't send messages or call so then i went on xrecovery mode and did a full wipe.
Partition Tools => Format /system
Partition Tools => Format /data
Partition Tools => Format cache
Advanced Options => Wipe Delvik Cache
Advanced Options => Wipe Battery Stats
when it told me to reboot, i rebooted and then the logo got stuck.
Click to expand...
Click to collapse
WHY... use a custom ROM, if you don't know how to handle it.. Of course it got stuck at the logo.. you format /system. There is not much more your phone could had done.
If you format everything, make sure to at least install another ROM in xrecovery, before you reboot.
I read the steps but when it says 'connect in usb slot', it wont work because when i plug my phone in my computer, it says that it isnt connected.
lylyhoanggg said:
I read the steps but when it says 'connect in usb slot', it wont work because when i plug my phone in my computer, it says that it isnt connected.
Click to expand...
Click to collapse
You need to connect it in Flash Mode, not just attach the cord.
Press and hold the back button (that's the one on the right)
and while pressing, insert the cord in the USB slot (assuming of course the usb cable is already connected on your PC).
A green light will flash steadily and the procedure should go on from there.
Ah! After you see that light, you can let go of the button!
FYI, the reason all this happened is because you formatted /system partition.
Practically, the phone is not stuck. There's just no firmware on it to load.
lylyhoanggg said:
I read the steps but when it says 'connect in usb slot', it wont work because when i plug my phone in my computer, it says that it isnt connected.
Click to expand...
Click to collapse
did you flash another ROM before you tried to reboot it?
Sent from my X10 using XDA Premium App
My_Immortal said:
You need to connect it in Flash Mode, not just attach the cord.
Press and hold the back button (that's the one on the right)
and while pressing, insert the cord in the USB slot (assuming of course the usb cable is already connected on your PC).
A green light will flash steadily and the procedure should go on from there.
Ah! After you see that light, you can let go of the button!
FYI, the reason all this happened is because you formatted /system partition.
Practically, the phone is not stuck. There's just no firmware on it to load.
Click to expand...
Click to collapse
Its still stuck at the logo.. nothing happens when i hold the buttons. it just boots into the logo.
help
you solve the problem?? i'm in the same situation, please help
I dont think my x10i flash mode is working. Mine got stuck after Flashing XperiaTW rom using xrecovery. It will bootup, and then shows Android system not responding force close/wait. clicked both , shows up again . now i dont really know what to do
Just use flashtool/SEUS and flash in the latest stock firmware.
Your cases are not the worst ones we've seen in this community.
i forgot to turn debugging in applications.. my xrecovery also doesn work... is there anyway to restore original settings?? pls reply asap
Hi every one
the best way to overcome this problem is to download Sony Ericsson Update Service (sony-ericsson-update-service.en.uptodown.com) and take your phone back to it's primary status.
I had this issue..
Where my X10 starts automatically(even after pulling out the battery and putting it back again) and get's stuck at the SE log, and you won't be able to go to Flashmode to use Flashtool.
Simply, follow the instrcutions below:
1. Take out the battery.
2. Connect the usb cable to your computer.
3. While holding the back button, put the battery back.
4. You are in flashmode again, Green LED should be on.
5. Done!.
X10 - stuck on SE Logo
Hi ,
I have this problem as well, the phone is stuck on Sony Ericsson Logo. Just hangs there. I tried with flashtool to no avail, pc companion and update service. ZIP .. nothing !
It seems like it doesnt want to flash. Please help me..
In SEUS if you connect the phone with BACK pressed for 5 seconds it`ll restore to your previous state ( i think) :cyclops:
lylyhoanggg said:
Partition Tools => Format /system
Click to expand...
Click to collapse
dude, no one formats system... now your only hope is sony update service. press the back button before connecting it while in shut down mode.
note
pennywhais said:
you solve the problem?? i'm in the same situation, please help
Click to expand...
Click to collapse
mate just don't panic when i try to. root my phone for 1st time.
i face the same issue.
so.. just try to use. SEUS ( sony Ericsson update services ) when it ask
you to connect your phone so connect it in flashing mode. holding back button
and process will start by its own and it will update to. ur stock firmware
and remember when you try to root your phone next time.
just try.. ONE click.. flash. which is avalable. in latest flashing tool
hope it will help .
lylyhoanggg said:
I was using 'MIUI Xperia by TripNaVeR v1.4.0
i decided to uninstall it because i couldn't send messages or call so then i went on xrecovery mode and did a full wipe.
Partition Tools => Format /system
Partition Tools => Format /data
Partition Tools => Format cache
Advanced Options => Wipe Delvik Cache
Advanced Options => Wipe Battery Stats
when it told me to reboot, i rebooted and then the logo got stuck.
I tried plugging my xperia x10 in the usb slots then went in Sony Ericsson PC Companion and it says that my phone isn't connected. I searched to my fullest but unfortunately, i couldn't find a solution how to fix it. for the past 2 weeks it didn't work and mum and pups couldn't do anything about it.
Sorry, but i'm just... frustrated. please please please help me.. i beg you. Well, not just me but other people that are having this problem too..
Click to expand...
Click to collapse
You soft bricked your phone, so follow these steps
1) Copy all important files from your MMC are copied onto your laptop (Music, snaps etc)
2) Now format your MMC (external SD card) and wipe everything clean (system cache,data,Delvik Cache) from your phone using CWM
3) Copy required ROM onto your MMC.
4) Flash the kernel and WiFi module (some WiFi modules can be flashed via CWM)
5) I usually flash WiFi module after flashing my ROM (flash WiFi module only if its required)
6) Install ROM and reboot
7) Good to go
Hopefully this helps
I have the endles sboot problem also:
I updated the phone using PC companion to the last version and still i have bootloop. And the update proces was a succes, no error ocured.
I try the Flash downgrade kernel and then the upgrade kernel but still it is on endless bootloop.
Any ideas?
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA
Hi guys, i have looked everyway but still couldnt find solution to my X10 mini 's problem. Please help me!
I managed to root and install xrecovery on my x10 mini(elcair) with flashtool. Took the next step and tried to install CWM recovery, and use it to run miniCM6.
After the white sony ericsson logo disappeared, the blue android with the spinning light appeared, but now it seems get stuck here.
I tried using PC companion to restore my phone, but when my phone go into flashmode, there's a windows pop-up saying the USB driver failed to install and USB device cannot be recognized. Tried using flashtool but it doesnt work either. When i tried charging the phone with the charger, the green LED light did not light up too. I was wondering whether its hardware or software problem. Anyone faced similar problem before or knows what can i do next?
I dont have e x10 so im not sure if i can help you but does it have a button combination to get in to download or recovery mode?
You may want to install the drivers for your phone again ,and try to connect your phone again.
Take a SE Stock ROM and flash it using the newest Flash-Tool according to the description how to flash.
This works - I had this problem also on a X10.
Hope it helps.
Dear Sir I Want Upgrade my xperia x10 mini
to gingerbread.
i followed all steps.
but after i do unlock bootloader My Phone
failed Received Network signal. then i do
further procedures flash, CWM clock etc.
After CWM clock screen i done Install
UPDATE.ZIP from my sdcard. after i switch
my phone. when i switch its shown only
"SONY ERICSSON" in WHITE LETTERS its not
off and on. plz help meeeeee
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
I use pc companion and SEUS but there no possible update firmware
. in SEUS shows u have already updated software. its no charging also. plz give me reply sir plzzzz;(
Have you flashed the kernel the right way? Try flashing it again.
http://forum.xda-developers.com/showthread.php?t=1256739
use recovery option in sues to get back on stock!
Plz Solve
Dear sir i lock my boot loader with s1tool but i cant flash my mobile. even i not update my firmware through SEUS. its shown u have already updated softare. but my mobile never switch on and not go to CWM clock screen. its shown onl WHITE LETTERS "SONY ERICSSON" Plz help meeeeeeeeee
Leave your phone unplugged from your computer
Start PC Companion
Choose Update
It will say phone not found and give you a repair link
Click on that
Accept that you will lose all data
Select the model of your phone from the popup
It will hopefully ask you to connect your phone in flashmode
Do the following:
Attach your phone to the computer using your usb-cable
Press HOME-POWER-BACK-buttons all at once. (your screen will turn off because it goes into reboot)
Release HOME and POWER but keep the BACK-button pressed.
It should go into flash-mode and PC Companion should start flashing the firmware.
Plz reply
I already done. but its not connect plz help me