Hi guys!! I'm asking to myself..Is impossible to have the "bravia mobile engine" software of the new Xperia Arc on our X10??
Thanks
yes its already ported
fusioncoast said:
yes its already ported
Click to expand...
Click to collapse
It's half-ported, 50%.
and even that 50 % is only claimed by one person & not confirmed by anyone else
Bravia Engine 61.0087651409% done.
It now allows for using the phone's display as a HD projector.
Practically no its not possible without open boot loader.You can't change or increase pixels without unlocking boot loader else 16 mil colors would have been out long time back
Sent from my X10i using XDA App
It is literally impossible to increase the pixels without changing the screen whether the bootloader is unlocked or not.
javagreen said:
Bravia Engine 61.0087651409% done.
It now allows for using the phone's display as a HD projector.
Click to expand...
Click to collapse
OMG can't believe this disrespect, How can you lower that guy's work like this? are you jealous or something? what do you mean Bravia Engine 61.0087651409% done? anyone with normal average eyesight could see that it's 61.0087651410% done lol
Please Help! No Bravia Engine option after Wolfrom Install
hello,
This is my first post, so please do bear with me... thank you.
I have an X10 on Orange (UK) and the stock 2.3.3 upgrade was rolled out last weekend.
I upgraded my phone to stock 2.3.3, and about two hours later rooted it (Ads were really bugging me) and then yesterday I installed the Wolfrom (Wolf_GB_2.3_TW_V4.zip) very easily using xRecovery. I followed these steps:
1) use the SE Backup & Restore for 2.3.3 (so glad this was available on this forum as I couldn't see it when I first upgraded and all my contacts etc had gone of course).
2) Boot phone in xRecovery and back up rom
3) Full Wipe, Clear cache partitions, Wipe dalvik cache
4) Install Cutom rom (as above) and then reboot phone
this worked great! And I had the rom on my phone, saw for a few seconds it worked then decided to use 2.3.3 backup and restore (had to install again) to get my contacts, messages and system settings back. I didn't check between installing the rom and restoring whether the BRAVIA engine was available, but when I look now, the Mobile Bravia Engine is NOT available in my Display Options, and I don't know if I have the battery tweaks which were mentioned in the thread installed either.
The phone defintely boots up as Wolfbreaks ROM, but I think my Restore may have messed something up, I just don't know what. Can anyone please advise?
To reiterate, i don't have the Mobile BRAVIA engine, or the new funky battery indicater (which is meant to improve battery life?), but do have the EDT tweaks app available. Can anyone help please? I will need to run a restore to keep my contacts/bookmarks at the very least - I can probably live without the text messages and mms messages. I am wondering if it was just me selecting "System Settings" when I restored that could have caused all this. Thank you so much in advance for anyone who can help.
Regards
Very Happy X10 user who now finally has Gingerbread!!!
x10user2009 said:
hello,
This is my first post, so please do bear with me... thank you.
I have an X10 on Orange (UK) and the stock 2.3.3 upgrade was rolled out last weekend.
I upgraded my phone to stock 2.3.3, and about two hours later rooted it (Ads were really bugging me) and then yesterday I installed the Wolfrom (Wolf_GB_2.3_TW_V4.zip) very easily using xRecovery. I followed these steps:
1) use the SE Backup & Restore for 2.3.3 (so glad this was available on this forum as I couldn't see it when I first upgraded and all my contacts etc had gone of course).
2) Boot phone in xRecovery and back up rom
3) Full Wipe, Clear cache partitions, Wipe dalvik cache
4) Install Cutom rom (as above) and then reboot phone
this worked great! And I had the rom on my phone, saw for a few seconds it worked then decided to use 2.3.3 backup and restore (had to install again) to get my contacts, messages and system settings back. I didn't check between installing the rom and restoring whether the BRAVIA engine was available, but when I look now, the Mobile Bravia Engine is NOT available in my Display Options, and I don't know if I have the battery tweaks which were mentioned in the thread installed either.
The phone defintely boots up as Wolfbreaks ROM, but I think my Restore may have messed something up, I just don't know what. Can anyone please advise?
To reiterate, i don't have the Mobile BRAVIA engine, or the new funky battery indicater (which is meant to improve battery life?), but do have the EDT tweaks app available. Can anyone help please? I will need to run a restore to keep my contacts/bookmarks at the very least - I can probably live without the text messages and mms messages. I am wondering if it was just me selecting "System Settings" when I restored that could have caused all this. Thank you so much in advance for anyone who can help.
Regards
Very Happy X10 user who now finally has Gingerbread!!!
Click to expand...
Click to collapse
Click Here
Thank you!
sahibunlimited said:
Click Here
Click to expand...
Click to collapse
Hello,
thank you so much for your help - but what do I do with these files please? Just copy them over or do i need to flash - if so can you tell me how please? Thanks!
x10user2009 said:
Hello,
thank you so much for your help - but what do I do with these files please? Just copy them over or do i need to flash - if so can you tell me how please? Thanks!
Click to expand...
Click to collapse
flash it using xrec
im really new at this so plz be patient with me
i dont know how to root my x10 , is there any risks of rooting it ??
is there any video can help me with that ??
what can i gain from it ??
thank you
3boodrada said:
im really new at this so plz be patient with me
i dont know how to root my x10 , is there any risks of rooting it ??
is there any video can help me with that ??
what can i gain from it ??
thank you
Click to expand...
Click to collapse
Search for flashtool pal and use that. That will root, install xrecovery and even unlock it bootloadsr. Among other things. Basically no there isn't a risk really with rooting ur phone. It can be uprooted very easily and it opens ur phone to a world of possibilities. If u need more info feel free to send me a pm I'll help u out (not at pc at min or I would post links for u to everything u need)
Sent from my X10i using XDA App
Related
I pretty much tried all the latest roms of froyo while been on the stock .24 rom till today.
The one thing that really bothers me though is the fact that I need to suffer with the stock messaging, phonebook and dialer of android instead of having the nice SE stock apps.
Is there any way or a rom that has froyo with the SE dialer and messaging?
Is that even possible or do we have to have the bootloader fixed first?
Thanks in advance for the help.
Sent from my X10i using XDA App
WolfBreak's CM 6.1.3 v054 has the official ARC dialer which is pretty much the same thing. For messeging, if you don't like the stock messaging app, then you should use Handscent which is amazing.
sorry to ask such a noob question but im new to all this....am i right in assuming that "WolfBreak's CM 6.1.3 v054" is the name of a rom? a few days ago i changed my phone to "free x10" is this wolfbreak cm a similar thing? and if i flash my phone to the wolf break one, does that mean that i will have to reinstall all my apps and completely refigure my phone again (ie settings and layout etc?)
thanks for any help
CM 6.1.3 V054 is the name of the rom, made by wolfbreak. It is actually smoother than beta 4. I had restored my data from xrecovery from beta 4 and it didn't cause any issues since both beta 4 and wolfbreaks's rom have a common base.
But I would recommend you to install all apps afresh. It wont take much time, will it?
woopypants said:
sorry to ask such a noob question but im new to all this....am i right in assuming that "WolfBreak's CM 6.1.3 v054" is the name of a rom? a few days ago i changed my phone to "free x10" is this wolfbreak cm a similar thing? and if i flash my phone to the wolf break one, does that mean that i will have to reinstall all my apps and completely refigure my phone again (ie settings and layout etc?)
thanks for any help
Click to expand...
Click to collapse
Sent from my Xperia Arc using XDA Premium App
hi, thanks very much for your help. i have installed wolfbreak's rom, everything is going fine except for some reason i cannot get into the market (i flashed the new market, and havent got around to flashing the blue market yet) and also when i try to log in with my google account, i cant! there is only an option for an exchange account (which i dont think i even have one?) and i cant figure out how to get in. its a real shame becoz i love the look and feel of this rom, but its pointless if i cant use the market or my gmail account. i tried to ask this question on the wolfbreak thread but cant as i am only a new member do you know who i can ask for more help?
thanks
woopypants said:
hi, thanks very much for your help. i have installed wolfbreak's rom, everything is going fine except for some reason i cannot get into the market (i flashed the new market, and havent got around to flashing the blue market yet) and also when i try to log in with my google account, i cant! there is only an option for an exchange account (which i dont think i even have one?) and i cant figure out how to get in. its a real shame becoz i love the look and feel of this rom, but its pointless if i cant use the market or my gmail account. i tried to ask this question on the wolfbreak thread but cant as i am only a new member do you know who i can ask for more help?
thanks
Click to expand...
Click to collapse
You need to flash the rom again:
- do a Factory Reset
- Wipe Cache Partition
- Format Cache
- Wipe Dalvik Cache
- flash CM 6.1.3 [v05].zip after that flash CM Update v054.zip
- reboot, login to the market and google account.
- reboot again into xrecovery and flash the new market
kistigun said:
You need to flash the rom again:
- do a Factory Reset
- Wipe Cache Partition
- Format Cache
- Wipe Dalvik Cache
- flash CM 6.1.3 [v05].zip after that flash CM Update v054.zip
- reboot, login to the market and google account.
- reboot again into xrecovery and flash the new market
Click to expand...
Click to collapse
thanks for the quick response. i have already tried re-flashing the CM 6.1.3 rom (using the directions from you) and still no luck, and so i did another factory reset whilst in xrecovery and installed the free-x10 rom which i was using prior to CM 6.1.3. and its the same thing in both of these roms - i cannot get into the market and when i go to add my google account it only allows me to use an "exchange" account? (whatever that is?)
is there a way i can go back to android 2.1? thanks for your help!
woopypants said:
thanks for the quick response. i have already tried re-flashing the CM 6.1.3 rom (using the directions from you) and still no luck, and so i did another factory reset whilst in xrecovery and installed the free-x10 rom which i was using prior to CM 6.1.3. and its the same thing in both of these roms - i cannot get into the market and when i go to add my google account it only allows me to use an "exchange" account? (whatever that is?)
is there a way i can go back to android 2.1? thanks for your help!
Click to expand...
Click to collapse
yes you can use seus/pc companion to repair or a flashtool to flash a stock 2.1 rom
never mind - i just found the problem, it was my own stupid fault, i was installing CM-6.1.3-V4.5 instead of 6.1.3(v05). so its all good now, sorry for getting off the topic of the thread but i am also interested in finding a se dialer for froyo too. is there a way to change the 'in call display' to the older 2.1 version configuration where the buttons were in different places and the display picture took up the whole top half of the screen?
thanks
woopypants said:
never mind - i just found the problem, it was my own stupid fault, i was installing CM-6.1.3-V4.5 instead of 6.1.3(v05). so its all good now, sorry for getting off the topic of the thread but i am also interested in finding a se dialer for froyo too. is there a way to change the 'in call display' to the older 2.1 version configuration where the buttons were in different places and the display picture took up the whole top half of the screen?
thanks
Click to expand...
Click to collapse
this is exactly what i want too..
Wolf's rom is awesome with its speed but personally i always liked the stock 2.1 phonebook and dialer which display pictures not in the middle of the screen but covering the whole top of the screen
is there any way to use them back in the wolfs rom?
i personally dont mind it having the smaller pic, every single display pic i assigned to my contacts came up blurry and distorted, no matter what i tried to do. i thought it was something to do with all xperias but my husband just got a htc desire and yeah, same problem with the picture pixelating on his too. ive read that its google's fault but dont know if someone has came up with a solution yet or not?
MIUIv4 for Un/Locked Bootloader
Hi Guys.. This rom was made for both Unlocked and Locked bootloader.
UPDATE!! MIUIv4 2.7.13 - Changelog
"This is not OTA update!! " Use Titanium Backup or MIUI backup to backup and restore your apps (for those who come from 2.6.29)
Old Version:
Code:
MIUI v4 build 2.6.29 (Stable Version) - [URL="http://www.mediafire.com/download.php?i83cldnerc1c8a5"][I][COLOR="Red"]here[/COLOR][/I][/URL]
**extract using 7zip and then put in sdcard/clockworkmod/backup**
!!!!THIS IS NOT FLASHABLE ZIP!!!!
How to install it??
1. You have to be in ICS firmware.. .562 or .431 will doing good.
2. Rooted and CWM Installed (Don't ask me how ) (if you have unlocked your bootloader just flash sirkay's kernel or any ICS stock kernel with cwm included)
3. Boot into Recovery, do Full Wipe
4. Tap into "Backup & Restore" choose restore and restore the backed up rom.
5. Wait till it done.
6. Reboot System and enjoy MIUI on your Locked Bootloader
How to get rooted??
Check LBE Guard app and tap manage root permission>enable root permission
Screenshot see attachment.. Special thanks to xparanoidx
Thanks to MIUIandroid(for providing wonderful miui rom) and jjdoctor (for the awesome guides).
***I'm not a developer so don't ask me how to fix bugs***
ADD-ON(S)
Xperia S ICS Keyboard: here -- Just flash this via CWM
(screenshot see attachment below)
I install it and work perfect.. just change for JJ rom and you will find this ROM is so laggy but, so eye candy,,, everything work well!.. SS is the same as MIUI SS in the others thread.. I hope it will contiuned to update with the latest MIUI ROM.
happy flashing
At first, thanks that more and more devs make roms for locked bootloaders
Just few questions:
Where is the original version? Where can I see the screenshots?
Is it rooted?
After restore cwm must install again?
I'm on JJ Hybrid 3.1 with locked bootloader.
Wechy77 said:
At first, thanks that more and more devs make roms for locked bootloaders
Just few questions:
Where is the original version? Where can I see the screenshots?
Is it rooted?
After restore cwm must install again?
I'm on JJ Hybrid 3.1 with locked bootloader.
Click to expand...
Click to collapse
I use original file from here and ported myself. For screenshot you could see from iriijo's or other miuiv4 threads, it's basically same.
Yes, it is rooted. Check the LBE Guard app and tap manage root permission and enable root.
I don't know about reinstalling cwm, but i suppose it's same with other locked bootloader rom.
Sorry, i'm at work, i can't test it.
Does anybody have installed it yet?
I can't do it actually, i'm not at home...
OK I've just flashed it this afternoon on top of a nearly stock rooted ICS4.0.4 install. SO FAR, everything I've tested seems to work... the only issues I've had is learning to use MIUI ;-)
I'm keeping my old backup in case I want to go back, but so far looks good - only FC I have had was Google Account Manager when I ignored a permissions request but a quick reboot soon fixed that....
SO far, so good
Well, installed it, works good ! Thanks !
Maybe I should give it a try lol.
I try this.... I just install it..
working perfectly for me so far, even FM radio works
Downloading right now. Honestly, JJ's Hybrid 3.1 is sweet, but let's give a try on this one, 'cause MIUI is great.
Please, can someone post some screenshots?
hi dude sorry but can i run the xperia keyboard on this ROM? i have a backup installed but when i try to write a smile sends me a error and closes :crying:
the ROM is working perfect but i prefer the sony keyboard...
thanks
google tanslator
daniel 26 said:
hi dude sorry but can i run the xperia keyboard on this ROM? i have a backup installed but when i try to write a smile sends me a error and closes :crying:
the ROM is working perfect but i prefer the sony keyboard...
thanks
google tanslator
Click to expand...
Click to collapse
Maybe you could flash xperia keyboard from jjhybrid thread (addon section). Someone confirm to me it's working.
Edited: someone else confirm to me it's bootlooping.. so make a backup first.
I will be the hero *o* i'm going to test this rom and tomorrow y put my conclusion and if it works for me i'll put screenshot c:
Thanks for your time to do the work n,n we need more rom's for bl locked :fingers-crossed:
Edit: ok i install it & run perfectly now as i promise here are the screenshot's, i notice a difference and it come's from camera i don't know why but... i see camera better than anyone it doesn't show noise and the quality is amazing. anyway my respects to miui creators but i love JJ's hybryd rom.
Wow, I have been testing this ROM for the last 15 hours and no problems at all. It runs smooth, great, and fast. I only got a problem with circle lockscreen, some delaying. But nothing else in the ROM was wrong.
But the most shocking thing is that the consumption of battery while I was sleeping (8 hours of sleep time) was... 0%!!
With stock and other ROMs, battery drained 5 to 10%, but not with MIUI!
If everything goes OK, I think I'll stick with MIUI for a while.
I'll leave some more screenshots:
Got a question: How do I mount as USB storage? I haven't realized on this ROM.
Im gonna try it when im @ home, but I hope its a good rom for me with locked bl
Sent from my ST18i using xda premium
OatnezrA said:
Maybe you could flash xperia keyboard from jjhybrid thread (addon section). Someone confirm to me it's working.
Edited: someone else confirm to me it's bootlooping.. so make a backup first.
Click to expand...
Click to collapse
Have you tried to flash Xperia keyboard zip from here: http://forum.xda-developers.com/showthread.php?t=1535971 ?
Direct download: http://www.mediafire.com/?dmo44i3ogn8z4
I'm interested on this keyboard too, so if you try to flash, please tell me how it goes.
El Brillantinas said:
Got a question: How do I mount as USB storage? I haven't realized on this ROM.
Click to expand...
Click to collapse
Just plug your ray and there will be an option to Open Usb Storage and choose Yes..
This is a FAQ for the ROM created by me and alokbina - http://forum.xda-developers.com/showthread.php?p=37247130
Q1. How to install?
Ans : -
0. Get root and CWM on .587 custom/stock rom. (Only locked bootloader)
1. Copy Rom on SD Card.
2. Flash kernel panic or any custom kernel. (skip for locked bootloader)
3. Boot into CWM.
4. If coming from V1 Rom, don't wipe data. Just wipe cache partition and dalvik cache.
5. This is compulsory - Mounts and storage-->format /system. If you are a new user, wipe data/factory reset , cache, dalvik cache, and format /system. This is a very important step.
6. Install Zip from SD Card.
7. Select the zip and install. In Aroma, SELECT THE RIGHT CONFIGURATION ELSE BRICK YOUR TOUCH.
8. At the end of installation, it will ask you to reboot the device. Uncheck that box and complete installation.
9. Then TURN OFF, do not restart. ( turn off by just pulling out the battery)
10. Remove sd card, battery and sim card for 20-30 seconds. Then re-insert everything.
11. Start phone and wait till it boots. ( If you get a bootloop, do a full wipe and re-install )
11.5 - Go to setting and force stop apex launcher and clear data.
12. Restart the phone TWICE just to make sure that everything is okay.
13. Enjoy your super smooth xperia nexus phone
14. Optional - You can now install small apps if you need it from here - http://forum.xda-developers.com/show....php?t=1929016
The small apps above are 100% confirmed to be working. You are also free to flash anything from the list of patches in the link.
Q2. When will it come for other MDPI devices?
Ans : - Just select the correct device and bootloader status in Aroma installer and you should be good to go.
Q3. Is this for both bootloaders?
Ans : - Yes! It work on both bootloaders. I have tested it myself on both. Just follow the installation instructions carefully and you should be successful.
Q4. What will happen if I flash a ST15i rom on any other xperia mdpi?
Ans : - Your touchscreen will stop functioning and you will have a mini-heart attack.
Q5. How to free more ram?
Ans : - Actually, free ram is ram wasted. But anyway - if you have any background apps running like facebook or dropbox, just go to settings and force stop them. As of android honeycomb, once a user app is force stopped, it won't start unless you manually start it.
Q6. I experience a very bad battery drain. What to do?
Ans : - This happens because of the disabled CPU rendering. Although it should increase battery life, I experimentally found out that without it battery is better. Anyway, just flash the attached adreno libs and your problem should be solved.
Q7. Wifi is not working...
Ans : - Go and check your respective kernel page for the wifi modules and flash via CWM.
Q8. Which kernel do you use?
Ans : - Kernel Panic for best performance. Battery life is okay. Approximately rate of discharge is 1% per hour.
Q9. Is this rom good for gaming?
Ans : - With Kernel Panic, I play almost all games with no lag. Temple Run 2, Dead Trigger etc. all run buttery smooth on stock frequencies. Overclocking will definitely help, but don't overclock too much as it will fry your CPU.
Q10. I need a system app which is not included in your Rom..
Ans : - Download stock .587 and place it in firmware folder of flashtool. Open the ftf with winrar and extract system.sin. Then open flash tool and go to tools--->Sin editor. Select system.sin and press dump data. Then go to extractors---->Yaffs2 and select system.yaffs2 file. Wait for the process and then you will find a folder in firmwares called as system_content. Go there and then go to app and take whatever apks you need. Don't unnecessarily create new threads requesting for some specific apks.
Q11. Is this and that mod compatible...
Ans : - Any mod that is for .587 should work.
Q12. I have locked bootloader, but it is laggy..
Ans : - Performance of your device greatly depends on kernel. As you have locked bootloader, kernel panic or any other custom kernel is out of option. If possible, please unlock your bootloader and use kernel panic for the real nexus effect. We will try out best to increase performance on locked bl.
Q13. What to do to fix all the bugs?
Ans : - For now please use any fixes that you find for the bugs. If it is compatible with .587 then it should work. We are working to fix the bugs.
Remember - ALWAYS FOLLOW THE RULES OF XDA
reserved
question
Sir, where can i Download the init.d loader because i have an experia mini st15i locked bootloader.
wanna try it. THANKS and more power!
Doubtfire said:
Sir, where can i Download the init.d loader because i have an experia mini st15i locked bootloader.
wanna try it. THANKS and more power!
Click to expand...
Click to collapse
Sorry for the delay. It will be updated in the main thread very soon. Till then - http://forum.xda-developers.com/showthread.php?t=1417375
I will also add it in the first question. Thanks.
Hope that you enjoy my rom.
Doubtfire said:
Sir, where can i Download the init.d loader because i have an experia mini st15i locked bootloader.
wanna try it. THANKS and more power!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1933849 download from 3rd post.its a zip. flash via cwm
thanks
Thanks so much!
gonna try it now.
i tried to download the ROM, but the link is error.
too much traffic and it has been disable blah blah..
Doubtfire said:
Thanks so much!
gonna try it now.
i tried to download the ROM, but the link is error.
too much traffic and it has been disable blah blah..
Click to expand...
Click to collapse
Sorry for the download link error. That stupid dropbox disabled my account for generating too much trafffic. Currently uploading to mediafire. Will update the link ASAP.
thankss
abcdjdj said:
Sorry for the download link error. That stupid dropbox disabled my account for generating too much trafffic. Currently uploading to mediafire. Will update the link ASAP.
Click to expand...
Click to collapse
now downloading :fingers-crossed:
Hitted thanks!
for the quick support.
just wanna ask, i read in the development thread, the ROM is updated it now support locked Bootloader, does it mean i dont need to flash the init.d loader?
thanks again!
Doubtfire said:
now downloading :fingers-crossed:
Hitted thanks!
for the quick support.
just wanna ask, i read in the development thread, the ROM is updated it now support locked Bootloader, does it mean i dont need to flash the init.d loader?
thanks again!
Click to expand...
Click to collapse
No. You will have to still flash the init.d zip given in the instructions. This issue will be fixed in the v2 of the Rom. Links have been updated. Mirrors added too.
Sent from my LT26i using xda app-developers app
ok!
abcdjdj said:
No. You will have to still flash the init.d zip given in the instructions. This issue will be fixed in the v2 of the Rom.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
ok THanks! got your instructions.
i wonder how you answer it quickly. the whole day you are here in the forum.
Big Thanks for that!
will be back to give feedback. i hope its a smooth and less bug.
and of course hoping not battery hungry.
Doubtfire said:
now downloading :fingers-crossed:
Hitted thanks!
for the quick support.
just wanna ask, i read in the development thread, the ROM is updated it now support locked Bootloader, does it mean i dont need to flash the init.d loader?
thanks again!
Click to expand...
Click to collapse
After you use the rom please give us a review......
Regards,
AJ
Good News: ROM released for all MDPI
Happy flashing guys....
Regards,
AJ
Sent from my Xperia Mini Pro using Tapatalk 2
uhm, ok
the installation went ok. made it successful.
at first it is laggy when opening the app drawer, i restart the phone still the same. i flash the adreno driver, and i feel it is improved.
other comments, theres no any file explorer app. i can't change the launcher settings.
good thing i didnt encounter any bugs.
i hope dont find any.
Doubtfire said:
the installation went ok. made it successful.
at first it is laggy when opening the app drawer, i restart the phone still the same. i flash the adreno driver, and i feel it is improved.
other comments, theres no any file explorer app. i can't change the launcher settings.
good thing i didnt encounter any bugs.
i hope dont find any.
Click to expand...
Click to collapse
In our next release we may most probably use the apex launcher and file manager might be included in next release......can u tell how u felt the performance of the rom(other than look)?? Is it fast and did u try playing any hd games? If yes how does it works for u?
Sent from my Xperia Mini Pro using Tapatalk 2
alokbina said:
In our next release we may most probably use the apex launcher and file manager might be included in next release......can u tell how u felt the performance of the rom(other than look)?? Is it fast and did u try playing any hd games? If yes how does it works for u?
Sent from my Xperia Mini Pro using Tapatalk 2
Click to expand...
Click to collapse
yea, i tried to play HD games,
i play Cytus, at first a little lag, but after sometime it goes well.
then i tried Temple Run 2, just like a normal playing less lag, and i also tried Wild Blood, it is smooth! thumbsup!
my only prob. is the launcher it is laggy..
and after playing the above games, my phone is hot.
Ok thnx a lot for ur reply.....launcher will be replaced as i said and the phone becoming hot problem isn't experienced by me.....still i'll check it and get the solution....
Regards,
AJ
Doubtfire said:
yea, i tried to play HD games,
i play Cytus, at first a little lag, but after sometime it goes well.
then i tried Temple Run 2, just like a normal playing less lag, and i also tried Wild Blood, it is smooth! thumbsup!
my only prob. is the launcher it is laggy..
and after playing the above games, my phone is hot.
Click to expand...
Click to collapse
Sorry for the lag but it is not possible to have as good performance on locked bl as that of unlocked bl. Custom kernels are more important than custom roms for performance. If possible please unlock your bl and use kernel panic. Also, the drivers that you flashed are only if you experience a battery drain. Flashing it reduces smoothness as it disables the gpu rendering mod..
Sent from my ST15i using xda app-developers app
Hey. I have a problem with my satsuma. Bootloader: unlocked, wiped everything, flashed the ROM and the patcher, but I´m still stuck at the SONY logo. Tried both rage kernel and kernel panic.
Tai11 said:
Hey. I have a problem with my satsuma. Bootloader: unlocked, wiped everything, flashed the ROM and the patcher, but I´m still stuck at the SONY logo. Tried both rage kernel and kernel panic.
Click to expand...
Click to collapse
Strange...Now that the patch is fixed so it should work...try redownloading the patch and then try again but please make sure u don't boot ur phone without patch or else ur touchscreen maybe gone...
Press THANKS if I helped,
Regards,
AJ
---------- Post added at 11:06 PM ---------- Previous post was at 11:04 PM ----------
Or try downloading the patch from here....http://db.tt/G18gPnqI.
Press THANKS if I helped,
Regards,
AJ
The patch you gave didn´t help either. Still stuck at SONY logo.:crying:
PS: is it normal that aroma installer is only on the upper half of the screen at kernel panic?
I Have made this thread to help ppl to ask and Q/A here
now it will easy to post here rather wasting time to create a thread...
Instead of wasting time to make a new thread come here and post ur Q/A , u can ask any thing related to this forum , device , roms , kernels , themes , mods etc ...have some doubts come and clarify here , want to share info come and post here ...any req post here..
so now u guys understand the main objective of this thread is to keep the forum clean and help others..
want to post here then have to follow some rules.
-NO OFF-TOPIC
-No spamming
-No fighting with other
-No Q/A related to best ROM/KERNEL
Sorry, but could you explain a bit more? I don't get that thread. Thought Q&A is for asking questions?
Sent from my Nexus 7 running Android 4.2.2
Hello
I wanted to ask, is it posible (on my ray) to make ultra light gapps and ROM with no ather apps just system and superSu + root browser.
I mean just main system apps, with no recorders, google talks, no live wallpapers picker or theme choosers...
My question is who could help me to find out main apps (just main) in my android?
Thanks.
finito911 said:
I wanted to ask, is it posible (on my ray) to make ultra light gapps and ROM with no ather apps just system and superSu + root browser.
I mean just main system apps, with no recorders, google talks, no live wallpapers picker or theme choosers...
My question is who could help me to find out main apps (just main) in my android?
Thanks.
Click to expand...
Click to collapse
Yes all these things are possible. A lot will depend on what ROM you are running and what you have already done to your device. If you google search for light gapps or minimal gapps you will find what you are looking for, just make sure to take a version of gapps that is compatible with your RAY and whatever ROM you are running on it. There is a pretty big list of what can and should not be deleted from your device here: http://forums.androidcentral.com/op...e-apks-their-purpose-safe-not-remove-big.html
Don't just remove anything that you "think" you don't need. Only remove stuff that you are reasonably sure is safe to remove and make sure that you have a rescue strategy ready (a nandroid back up of your device for example) in case it all goes wrong.
I'm really sorry if this isn't BC the correct place to part but I'm going mad.... I recently rooted my gs3 gti9300 int via Odin and then installed CyanogenMod 10.1 nightly. I was previously on 4.1.2 jelly bean. But now I'm worried that CyanogenMod do sent have the the fix for exynos and sudden death in the CyanogenMod kernel/firmware??? Can anyone shed any light? I'm so new to this and panicking. I tried the emmc checker and said insane chip?
Thanks in advance
Sent from my GT-I9300 using xda app-developers app
cameracartwright said:
I'm really sorry if this isn't BC the correct place to part but I'm going mad.... I recently rooted my gs3 gti9300 int via Odin and then installed CyanogenMod 10.1 nightly. I was previously on 4.1.2 jelly bean. But now I'm worried that CyanogenMod do sent have the the fix for exynos and sudden death in the CyanogenMod kernel/firmware??? Can anyone shed any light? I'm so new to this and panicking. I tried the emmc checker and said insane chip?
Thanks in advance
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I think you are lost....go here for information/help on sudden death: http://forum.xda-developers.com/showthread.php?t=2091045 I believe it is for your device, just double check.
Thanks I'm all sorted now mate
Sent from my GT-I9300 using xda app-developers app
mihahn said:
Sorry, but could you explain a bit more? I don't get that thread. Thought Q&A is for asking questions?
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
Yes ...but instead of wasting time to make a new thread...they can come here and post....
Ill edit the OP..
Sent from my SK17i using XDA Premium HD app
mihahn said:
Sorry, but could you explain a bit more? I don't get that thread. Thought Q&A is for asking questions?
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
These types of general help threads are becoming more popular around xda and as sandy7 said, it is largely a way to keep people from opening up new threads (most of which are repeated questions). These unnecessary threads can clog up a forum and cause more important threads to sink and be hard to find. These general help threads are usually describes as new user friendly and that anything can be asked with out the asker getting flamed. That includes the dreaded "which is the best rom" question, which should be answered as politely as possible (hard I know!). If you guys care, I know of some of these other threads and I can post or PM you links, so you can see how others have done it.
I am on stock sony rom+mesa 3.8 hybrid, I created a back via TWRP, so now I want to install cm10 on my phone.
questions:
1) after installing cm10, if i restore the backup, will it backup only my data and settings? will it revert back to stock rom/the rom for which the backup was created?
2)how to switch between 2 roms(maintaining same data on both)?
3) does mesa 3.8 support init.d script?
4) how to check if init.d script is working on my device?
5) is i install any other rom, will the init.d script remain?
2. Confirm first - I know it works if it's the update of the same rom flash a new rom without wiping data, just wipe cache and dalvik, it will either work or bootloop
3, 4. If u are a noob, download pimpmyrom from store, itchecks for you and if it's not there it can make it supported, if dev there wud be a much better way
Sent from my Xperia Mini Pro
jiteshpabla97 said:
I am on stock sony rom+mesa 3.8 hybrid, I created a back via TWRP, so now I want to install cm10 on my phone.
questions:
1) after installing cm10, if i restore the backup, will it backup only my data and settings? will it revert back to stock rom/the rom for which the backup was created?
2)how to switch between 2 roms(maintaining same data on both)?
3) does mesa 3.8 support init.d script?
4) how to check if init.d script is working on my device?
5) is i install any other rom, will the init.d script remain?
Click to expand...
Click to collapse
1. Nope if you restore ics backup on jb kernel you will be stuck in bootloop. Also I won't recommend you to use ics data on cm10.
2. If you are using ics rom then you can use nearly any ics rom over it without wiping data but doing all the other given wipes. Same goes for other android versions.
3. Just check in the mesa kernel thread no need to ask here.
4. If it's in the kernel then it will work. Anyways you cud do as mnishamk told u...
5. Most probably it may. Many of the ROMs here have int.d support.
Best Regards,
AJ
Q. Is lupus kernel available for gb?
Sent from my Xperia Mini Pro
Real ics v.6 lockring
Hello, I'm currently using Real ICS r.6 with LUPUS kernel V.3 and i want to change the lockring in my lockscreen.I tried with zip themer after i updated edify with the rom's zip and nothing changed,i also tried this guide http://forum.xda-developers.com/showthread.php?t=1810048 and i had no success.Any ideas? I used to have Ultimate HD 2.0.2 and i changed lockring with zipthemer.Is there any way to change in Real ICS r6?i use wave lockscreen
mnishamk said:
Q. Is lupus kernel available for gb?
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
Nope
Sent from my Nexus 7 using Tapatalk HD
panterakias said:
Hello, I'm currently using Real ICS r.6 with LUPUS kernel V.3 and i want to change the lockring in my lockscreen.I tried with zip themer after i updated edify with the rom's zip and nothing changed,i also tried this guide http://forum.xda-developers.com/showthread.php?t=1810048 and i had no success.Any ideas? I used to have Ultimate HD 2.0.2 and i changed lockring with zipthemer.Is there any way to change in Real ICS r6?i use wave lockscreen
Click to expand...
Click to collapse
Those are jb roms....we have a different PNG name for our ics framework....open the framework-res.apk with winrar goto res/drawables-mdpi/HDPI search for 'lockscreen handled ' pngs.....reane the the pngs in zip themer and flash it.
Sent from my SK17i using XDA Premium HD app
Thanks a lot!I didn't know that I could rename from zip themer.
Sent from my ST17i using xda app-developers app
Installing Stock Apps In Custom Rom
I just want to ask if I could install some stock apps to a custom rom. I have installed "xNXT™ 7" on my WT19i yesterday. The rom is nice but I want to use stock ICS (WT19i) conversations app with it. I pushed it to system/app using ROOT EXPLORER with correct permissions but after rebooting my messaging app was gone.
I tried posting my problem on rom's thread but I'm new here @ XDA and not allowed to post under development forum until post count reaches 10.
Is there any way ?
Thanks
wireless is not working
plz need help after unlocking and rooting my se live with walkman the wireless stopped working :s it get stuck when i try to turn it on
any one can help please ?????
alaa katlan said:
plz need help after unlocking and rooting my se live with walkman the wireless stopped working :s it get stuck when i try to turn it on
any one can help please ?????
Click to expand...
Click to collapse
Which did u flash....flash WiFi modules for it..
Sent from my SK17i using XDA Premium HD app
This Is The OFFICIAL DISCUSSION PAGE of ULTIMATE ROM
This page is for
#NEW users who cant post on dev threads and want to express themselves
#OTHER users of the rom who want to post non dev stuff about rom
#INTERESTED users to ask me non dev questions about the rom
Official FB Hangout Page
https://www.facebook.com/UltimateRom
Do Visit It,Like It and Promote It For Others To Enjoy
This Thread is meant for
1)SUGGESTIONS
2)DISCUSSIONS
3)REVIEWS
4)FIXES
5)COMPLAINS
6)REPORTS of mods and kernel with this ROM
This Thread Is Not Meant For
1)Insulting anyone or calling anyone noob
2)Use of abusive language will not be tolerated
3)Posting benchmarks
4)Discussions about anything else that does not include ultimate rom
U mean this for general device discuss? P,U,SOLA & GO ?
okay whatever
Anyone PORT to XU NEW version jb XP 6.2.A.1.100?? not Pipi rom!!
If you have can u share ?
Sent From C6603 Using xda premium
I'll be glad to see new UI in the notification bar.
no notification led
hello every one
i posted my issue in many places and i couldnt get the right help
i flashed ultimate rom v4z and its perfect except the notifiaction light it disappeared!!!
it works when the phone is off but when its working it doesnt work it lights for a milisecond without seeing it then disapear
i tried:: !) wiping cach and dalvik cache
2) disable light control
3) reanable it
but nothing works
please help me
(V9 clean installation step by step from OP with a last wipe data/factory reset)The rom is not smooth as I expected,however is smoother than ics!
Battery life is good like ics custom roms,no way to change slide lockscreen wallpaper ,except using xperia wallpapers.
Sometime ,for just a second, there are graphic glitches.Known camera recording bug ,no way to fix for me,tried some modes but doesn't change anything.
Finally i can say that is a good JB rom! I really apreciate your hard work and i think and i hope that you can improve this rom to lead a complete bugfree and optimized rom!notification led doesn't work...
after few days it becomes smoother
Hello
Arabic language support proposed
Because it is very important for countries
North Africa and the Middle East
que
Ashwin Prabhunerurkar said:
This Is The OFFICIAL DISCUSSION PAGE of ULTIMATE ROM
This page is for
#NEW users who cant post on dev threads and want to express themselves
#OTHER users of the rom who want to post non dev stuff about rom
#INTERESTED users to ask me non dev questions about the rom
This Thread is meant for
1)SUGGESTIONS
2)DISCUSSIONS
3)REVIEWS
4)FIXES
5)COMPLAINS
6)REPORTS of mods and kernel with this ROM
This Thread Is Not Meant For
1)Insulting anyone or calling anyone noob
2)Use of abusive language will not be tolerated
3)Posting benchmarks
4)Discussions about anything else that does not include ultimate rom
Click to expand...
Click to collapse
camera is not working?? what to do i hv again installed it but still same problem wid video recording..?
i'm on V8 (don't have time to upgrade to v9), with experimental kernel v6b (ondemand+sio, 400mhz-1ghz)
it's very smooth and fast!
the only problem is a few redraws of the launcher, after closing heavy apps. however it doesn't last long, i'm used to it.
also camera fc after recording, cideo is saved though (only one test, i don't use it a lot..)
I have ultimate rom v7 installed. Any idea why I can't install new fonts or change boot animation? I can't even modify the system folder :/
dpool94 said:
I have ultimate rom v7 installed. Any idea why I can't install new fonts or change boot animation? I can't even modify the system folder :/
Click to expand...
Click to collapse
Have you mounted as r/w?
Sent from my Sony Xperia™ sola using XDA Premium App
Ben Ling said:
Have you mounted as r/w?
Sent from my Sony Xperia™ sola using XDA Premium App
Click to expand...
Click to collapse
Tried that.. it doesn't even get mounted as r/w
i'm on v8.
is it safe to use another camera mod, like cybershot?
any suggestions/links?
(my main problem is that camera does not get activated on vine, so all i get is a black screen)
-Post deleted by user-
christos4 said:
i'm on V8 (don't have time to upgrade to v9), with experimental kernel v6b (ondemand+sio, 400mhz-1ghz)
it's very smooth and fast!
the only problem is a few redraws of the launcher, after closing heavy apps. however it doesn't last long, i'm used to it.
also camera fc after recording, cideo is saved though (only one test, i don't use it a lot..)
Click to expand...
Click to collapse
for your launcher redraw problem i have the fix.
download the service.jar file from the link and copy it to /system/framework and set permissions to 644 and you will never face redraw....
https://drive.google.com/folderview?id=0Bxy1VUQsM5endkU0ZWEtNDQ1bHM&usp=sharing
Feel free to press THANKS if i helped
---------- Post added at 12:54 PM ---------- Previous post was at 12:48 PM ----------
dpool94 said:
Tried that.. it doesn't even get mounted as r/w
Click to expand...
Click to collapse
you can change your bootanimation by deleting the bootanimation.zip from /system/media and copy your zip there and set permissions to 755 and reboot....!!
Feel free to press THANKS if i helped....
Hello, I have three issues with this ROM and one is major and other two are visual.
I have Phantom kernel and ultimate rom v9.
1) I can't uninstall any system apps. I tried with ROM Customizer, it says "Failed!" everytime. I even tried deleting them with a script in CWM but I couldn't. Why is this?
2) My LED doesn't light up when I get an SMS. How can I fix this? (It works with some other apps, for ex. my alarm clock)
3) Messaging font seems too big for me, how can I adjust this?
Thanks in advance.
Hey @Ashwin Prabhunerurkar how to get that backward song option in notification bar on Munjeni's jelly bean ROM? Thanks
@Ashwin Prabhunerurkar (or anyone else) can you confirm that i can update the experimental kernel to v7.1 ?
it says "Updated kernel to 6.2.A.1.100 "
so would that be a problem for your rom ?
dnilbia said:
Hello, I have three issues with this ROM and one is major and other two are visual.
I have Phantom kernel and ultimate rom v9.
1) I can't uninstall any system apps. I tried with ROM Customizer, it says "Failed!" everytime. I even tried deleting them with a script in CWM but I couldn't. Why is this?
2) My LED doesn't light up when I get an SMS. How can I fix this? (It works with some other apps, for ex. my alarm clock)
3) Messaging font seems too big for me, how can I adjust this?
Thanks in advance.
Click to expand...
Click to collapse
exactly.. anything's that related to system can't be modified,. I can't even make a nandroid backup for cryin out loud
dpool94 said:
exactly.. anything's that related to system can't be modified,. I can't even make a nandroid backup for cryin out loud
Click to expand...
Click to collapse
For crying out loud make sure u follow the instructions properly and use experimental kernel
And on top of that make sure u update the binary of super user
Then u won't face any problem
dnilbia said:
Hello, I have three issues with this ROM and one is major and other two are visual.
I have Phantom kernel and ultimate rom v9.
1) I can't uninstall any system apps. I tried with ROM Customizer, it says "Failed!" everytime. I even tried deleting them with a script in CWM but I couldn't. Why is this?
2) My LED doesn't light up when I get an SMS. How can I fix this? (It works with some other apps, for ex. my alarm clock)
3) Messaging font seems too big for me, how can I adjust this?
Thanks in advance.
Click to expand...
Click to collapse
1)use experimental kernel and update sure binary for system access and cwm 2)do a clean install with experimental kernel as led is workinga for all of us
3)reduce font in display