[Q] Problem with TripNArc Gingerbread 2.3.1 [email protected] - XPERIA X10 Q&A, Help & Troubleshooting

Hello, I need your help.
I just installed the ROM TripNArc Gingerbread 2.3.1 arcxperia
by xrecovery but now I want to restore the ROM I had before. My
problem is that now I can not enter xrecovery.
I would appreciate help.
I hope your help, Regards.
Sorry for my English.

diogenessm said:
Hello, I need your help.
I just installed the ROM TripNArc Gingerbread 2.3.1 arcxperia
by xrecovery but now I want to restore the ROM I had before. My
problem is that now I can not enter xrecovery.
I would appreciate help.
I hope your help, Regards.
Sorry for my English.
Click to expand...
Click to collapse
If you don't have the xrecovery.apk file in your sd to install it..you must flash another firmware using the flashtool..then install x recovery e restore your rom!!
Sent from my X10i TripNMiUI using XDA App

diogenessm said:
Hello, I need your help.
I just installed the ROM TripNArc Gingerbread 2.3.1 arcxperia
by xrecovery but now I want to restore the ROM I had before. My
problem is that now I can not enter xrecovery.
I would appreciate help.
I hope your help, Regards.
Sorry for my English.
Click to expand...
Click to collapse
I got the same problem.I installed xrecovery on 2.3.1 using adb command and then on restart Xrecovery is back.
100% Working

Related

Problem after reseting te original rom

Hi everyone., hope someone can help me. I rootet my phone and then got a custom rom, everything worked great and everything, but then i sudenly noticed that was'nt able to install the backup and restore app, and therefore could not restore my contacts. So i used se update program to get the stock 2.1 rom again, but there it all went wrong. Now it is crashing all the time, and i cant root it with z4 root or super one click to install a custom rom again.. So what do i do??:-S
Thanks for any help
Sent from my U20i using XDA App
You need to flash your phone via Bin4ry's flasher.I can't post links so try to find it yourself
ignatoff666 said:
You need to flash your phone via Bin4ry's flasher.I can't post links so try to find it yourself
Click to expand...
Click to collapse
Can i use any rom i want with the flasher?
Sent from my U20i using XDA App
Just make sure your firmware is compatible with your mini pro and it should work.
Sent from my U20i using XDA App

stock SE rom to install via xrecovery?

Hello guys! I want to know where to find the stock original SE rom 2.1.1.A.0.6 to install it via xrecovery? (update.zip or custom.zip) not for flashtool.
thanks.
me too plz, I need the ROM of the original SE 2.1 firmware for xrecovery.
Man, you can always flash it with seus, sony update service.
Sent from my U20i using XDA Premium App
Just flash your device, at once root and install xrecovery, then go into xrecovery and do a backup and there you go. Got the zip in xrecevory folder on your SDCard.
nujhum said:
Man, you can always flash it with seus, sony update service.
Click to expand...
Click to collapse
In my dreams..
herrfisk said:
Just flash your device, at once root and install xrecovery, then go into xrecovery and do a backup and there you go. Got the zip in xrecevory folder on your SDCard.
Click to expand...
Click to collapse
OP asked for a 2.1 stock rom.. Don't you think if he could have used SEUS or FlashTool he would have used that instead of asking for a xRecovery image?
Here's the deal, which I believe is the same reason the OP asks for a stock rom to flash with xRecovery.
My USB port is busted. Dead. I have better odds at winning the national lottery than making my computer connect to my X10. but I have one last hope. I have a working copy xRecovery installed on my custom X10! trouble is, if I am going to claim warranty for my phone I need a stock rom.
So, while it is possible to flash custom roms so why is there no stock roms available for xRecovery? or is there?
I install JRom and found out that this rom is exactly the same with the original stock rom I had when I bought this phone.
Thx ... never think of that before... °_°
Sent from my X10mini using XDA Premium App
herrfisk said:
Just flash your device, at once root and install xrecovery, then go into xrecovery and do a backup and there you go. Got the zip in xrecevory folder on your SDCard.
Click to expand...
Click to collapse
Thx ... never think of that before... °_°
Sent from my X10mini using XDA Premium App

[Q] Rooting my X10i and being able to install Gingerbread,

Hi, guy & girls
i am wanting to root my X10i and then install the gingerbread system on my phone, i was hoping someone could point me in the right direction of which method to use when rooting as i know there are a few tools out there for rooting, (easy as possible really)
Thank You, any help will taken on board..
Just look up flashtool on android development as it's probably the easiest method. If not then try superoneclick.
i have done superoneclick and the superuser app had appeared on my phone, how do i go about installing gingerbread?
ScarthHD said:
i have done superoneclick and the superuser app had appeared on my phone, how do i go about installing gingerbread?
Click to expand...
Click to collapse
Do you have baseband .52 installed on your phone? You need that for gingerbread.
Then people on this forum or I will help u install gingerbread.
Sent from my X10i using XDA Premium App
I have baseband 52. Version 2.1update-1 is it possible to install gingerbread?
kenzhin said:
I have baseband 52. Version 2.1update-1 is it possible to install gingerbread?
Click to expand...
Click to collapse
Yes, but you must install busybox with flashtool, then install xrecovery from the xrecovery thread. Have you used flashtool before?
Then read about a gingerbread ROMS thread to install the ROM through xrecovery.
If you have trouble, I will post links when I get to a computer tomorrow.
Sent from my X10i using XDA Premium App
Voelker45 said:
Do you have baseband .52 installed on your phone? You need that for gingerbread.
Then people on this forum or I will help u install gingerbread.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
i have done backup and restore, due to my phone going abit funny after superoneclick so i am now using flashtool, but thanks so much for the advice
Voelker45 said:
Yes, but you must install busybox with flashtool, then install xrecovery from the xrecovery thread. Have you used flashtool before?
Then read about a gingerbread ROMS thread to install the ROM through xrecovery.
If you have trouble, I will post links when I get to a computer tomorrow.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
i have busybox installed from market.. i havent used flash tool yet.. please do post some links so atleast it is not hard for me and others to get this work on
i dunno how to install xrecovery..
please do help me
just use Flashtool, the easiest method i know, you can root, then instal busybox, then install xrecovery.
see this http://forum.xda-developers.com/showthread.php?t=928343

[!HELP!] After Installing JIT Enabler!!

Ive recently installed jit enabler via xRecovery and it keeps restarting itself after the SE logo bootscreen!!
It there a disabler??
This is the zip i installed.
http://www.mediafire.com/?djm9ggkil4d168m
____________________________________
My X10i Info:
Using Wolfbreak 2.3.3 ROM
Have xRecovery
Rooted
Brandon105 said:
Ive recently installed jit enabler via xRecovery and it keeps restarting itself after the SE logo bootscreen!!
It there a disabler??
This is the zip i installed.
http://www.mediafire.com/?djm9ggkil4d168m
____________________________________
My X10i Info:
Using Wolfbreak 2.3.3 ROM
Have xRecovery
Rooted
Click to expand...
Click to collapse
Why install JIT when it's a stock feature on 2.2+ versions of android?
Sent from my X10i using XDA App
ok thats my mistake.
is there a way to uninstall it?
it keeps restarting on SE logo bootscreen
can you go into recovery?
if you can boot into xrecovery then install rom again.
if u can't then flash generic 2.1 through flashtool,root and install xrecovery and then then install WB rom again..
correct me if i m wrong...
Thanks to u both. But i just remembered that i had a backup in xrecovery and i went into advance backup and selected system and it is now fixed. Ill push the thanks button as soon as i can use my pc.THANKS AGAIN!
Sent from my X10i using XDA App

Help..

Tried to install another rom tonight and phones just locked and not loading,,,,arhhhhh. Could some point to the thread where I can download the kernal and reload via odin.
Thanks
wat rom did u try and install?
can u still get into recovery? :L
search function....you are not using it correctly....
Root..
Hi ...thanks for prompt reply.
Managed to restore to 2.3.3 and Gingerbread xwke2 however it wont let me restore using titanium backup. Tells me i can't acquire root privileges . This application will not work. Please vverify that your ROM is rooted and includes Busy box.
Any suggestions what to load...
Thanks
sr
steve16 said:
Hi ...thanks for prompt reply.
Managed to restore to 2.3.3 and Gingerbread xwke2 however it wont let me restore using titanium backup. Tells me i can't acquire root privileges . This application will not work. Please vverify that your ROM is rooted and includes Busy box.
Any suggestions what to load...
Thanks
sr
Click to expand...
Click to collapse
U have lost root. So flash a kernel that gives u root. Such as cf root. :]
Sent from my GT-I9100 using xda premium
Sorted
Many thanks for the help.....all done and working again
Thanks
sr
steve16 said:
Many thanks for the help.....all done and working again
Thanks
sr
Click to expand...
Click to collapse
Pleasure mate
Remember to hit that thanks button if I've helped u in any way
Sent from my GT-I9100 using xda premium

Categories

Resources