Hello guys! I want to know where to find the stock original SE rom 2.1.1.A.0.6 to install it via xrecovery? (update.zip or custom.zip) not for flashtool.
thanks.
me too plz, I need the ROM of the original SE 2.1 firmware for xrecovery.
Man, you can always flash it with seus, sony update service.
Sent from my U20i using XDA Premium App
Just flash your device, at once root and install xrecovery, then go into xrecovery and do a backup and there you go. Got the zip in xrecevory folder on your SDCard.
nujhum said:
Man, you can always flash it with seus, sony update service.
Click to expand...
Click to collapse
In my dreams..
herrfisk said:
Just flash your device, at once root and install xrecovery, then go into xrecovery and do a backup and there you go. Got the zip in xrecevory folder on your SDCard.
Click to expand...
Click to collapse
OP asked for a 2.1 stock rom.. Don't you think if he could have used SEUS or FlashTool he would have used that instead of asking for a xRecovery image?
Here's the deal, which I believe is the same reason the OP asks for a stock rom to flash with xRecovery.
My USB port is busted. Dead. I have better odds at winning the national lottery than making my computer connect to my X10. but I have one last hope. I have a working copy xRecovery installed on my custom X10! trouble is, if I am going to claim warranty for my phone I need a stock rom.
So, while it is possible to flash custom roms so why is there no stock roms available for xRecovery? or is there?
I install JRom and found out that this rom is exactly the same with the original stock rom I had when I bought this phone.
Thx ... never think of that before... °_°
Sent from my X10mini using XDA Premium App
herrfisk said:
Just flash your device, at once root and install xrecovery, then go into xrecovery and do a backup and there you go. Got the zip in xrecevory folder on your SDCard.
Click to expand...
Click to collapse
Thx ... never think of that before... °_°
Sent from my X10mini using XDA Premium App
Related
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Only way is to download the flash tool, flash se 2.1 rom, root it and install xrecocery.
Since your system is formated the files required for xrecovery is gone.
Sent from my X10i using XDA App
realunited123 said:
Only way is to download the flash tool, flash se 2.1 rom, root it and install xrecocery.
Since your system is formated the files required for xrecovery is gone.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
my current firmware is 2.1.... is it still can flash 2.1.. if can.. how to flash it?
keelz said:
my current firmware is 2.1.... is it still can flash 2.1.. if can.. how to flash it?
Click to expand...
Click to collapse
Just go to the flash tool thread in the development forum. There are instructions there.
Sent from my X10i using XDA App
BTW... wrong section.. post in mini pro subforum.
realunited123 said:
Just go to the flash tool thread in the development forum. There are instructions there.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thx for your replies... installed back the software from SEUS and it solved the prob
Tehouster said:
BTW... wrong section.. post in mini pro subforum.
Click to expand...
Click to collapse
sorry im a newbie
keelz said:
thx for your replies... installed back the software from SEUS and it solved the prob
sorry im a newbie
Click to expand...
Click to collapse
I'm glad that you solved your problem, but next time post in proper section
same problem
i have a somewhat similar problem...i used azzuzu's method to downgrade the kernel for rooting..as it was said the phone got stuck on the sony ericsson logo and i tried to connect it according to the steps..but flashtool isnt recognising my phone anymore and busybox isnt being installed..now my phone never starts up and is always stuck at the sony ericsson logo..plz someone help sorry for posting this in your thread , feeling pretty helpless right now
i was on stock 2.3.3 rom..and i cant find my region's rom on this site..and i cant even flash anything into the phone as the "hold back key and plug the usb in" method no longer works now.. plz someone help
Hello,
I want to backup all my firmware to use with X10 flasher tools, how i can do it?
Man thanks
Look for the decrypt thread here. That's how pbezza was able to get his .ftf
Sent from my U20i using XDA App
same thing needed :S can u provide some links ?
necrohades said:
Look for the decrypt thread here. That's how pbezza was able to get his .ftf
Sent from my U20i using XDA App
Click to expand...
Click to collapse
I don't want to decrypt a official rom, i want to make a room from my current device as FULL firmware backup.
Because if the phone bricks i can flash throught X10 Flasher, without reinstalling the sony ericsson update and xrecovery
@alecuba16
have you been successful to make backup?
alecuba16 said:
I don't want to decrypt a official rom, i want to make a room from my current device as FULL firmware backup.
Because if the phone bricks i can flash throught X10 Flasher, without reinstalling the sony ericsson update and xrecovery
Click to expand...
Click to collapse
I am also waiting. I also want a clean firmware which is there on first start of phone.
i have X10 mini pro and i have installed RECOVERY and backed up the stock rom that came with the device. after that i have installed CM7 but my SD card stoped working and i lost all the data on it including the back up.
now i want to go back to the stock rom with hebrew build in and i dont know how. i tried the SEUS but it said that ther is no updat and i cant repair it.
SEUS says there is no update but U can reinstall the newest firmware. And the newest FW from SE is 2.1
neoxkid said:
i have X10 mini pro and i have installed RECOVERY and backed up the stock rom that came with the device. after that i have installed CM7 but my SD card stoped working and i lost all the data on it including the back up.
now i want to go back to the stock rom with hebrew build in and i dont know how. i tried the SEUS but it said that ther is no updat and i cant repair it.
Click to expand...
Click to collapse
just use flashtool..go here for guide how to use flashtool and how to restore ur stock rom with flashtool..
Solution:
http://forum.xda-developers.com/showthread.php?t=1125587
[FIRMWARE]2.1.1.A.0.6 Greek .ftf+.sin files. Install the .6 kernel with 015 baseband!
It has some apps like FIFA.com, QuickOffice, Roller Coaster, etc... Try it!
;-)
Sent from my U20i using XDA Premium App
leajian said:
Solution:
http://forum.xda-developers.com/showthread.php?t=1125587
[FIRMWARE]2.1.1.A.0.6 Greek .ftf+.sin files. Install the .6 kernel with 015 baseband!
It has some apps like FIFA.com, QuickOffice, Roller Coaster, etc... Try it!
;-)
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Thank u very much. it worked and there is hebrew. u r my heroooooo
so, this is the deal:
i dont know how to use flashtool.
My PC's system requirments for flashtool are more than enough.
i just dont understand how to use it.
i keep getting stuck at "not detected" or something.
ANYWAY, LEAVE THAT! i dont care about flashtool.
i updated my firmware 1.6 to 2.1
then i rooted my 2.1
then installed busybox
then installed xrecovery
then wiped everything
then installed many firmware 2.1 custom roms
HOWEVER, i find that i can only install 2.1 custom roms. i cant install 2.3 or higher custom roms. My phone keeps restarting automatically if i did that. so the latest CM mode i can use is 6.1.3 ! which is sad.
how can i get 2.3 or higher custom roms to work
on my phone without endless-automatic-restart-loop ???
pls tell me. thankyou.
Flash the correct bandstand....
Our update in pccompanion first,
Sent from my X10i using xda premium
Yeah it coz u on wrong baseband (ur baseband in about phone should say 2.1.71). Use pccompanion or seus to update. Then use flashtool to root etc. Should work fine
Sent from my X10i using XDA App
hi
gregbradley said:
Flash the correct bandstand....
Or update in pccompanion first
Click to expand...
Click to collapse
laneyofdeath said:
Yeah it coz u on wrong baseband (ur baseband in about phone should say 2.1.71). Use pccompanion or seus to update. Then use flashtool to root etc. Should work fine
Click to expand...
Click to collapse
thanks but i cant use PCcompanion or SEUS because i will end up with 2.3. i dont know how to root 2.3 without flashtool (REMEMBER I TOLD YOU I CANNOT USE FLASHTOOL). but i can root my current 2.1 with z4root app. then i have xrecovery.
is there a (.zip) archive that i can install via xrecovery to get baseband 2.1.71 ?
No, a far as I can remember all basebands are only flashable through xrecovery.
You better get working on learning how to use flashtool...its the only way to do anything with the x10
Sent from my X10i using xda premium
If u install 2.1.71 bb u would have to be on 2.3 anyway not 2.1. Greg right pal u need flashtool in ur life it the only way to flash baseband currently for our phones. Follow flashtool-noobs guide you'll be fine (no need for z4 root its old, flashtool has one-click root)
Sent from my X10i using XDA App
thanks
gregbradley said:
No, a far as I can remember all basebands are only flashable through xrecovery.
You better get working on learning how to use flashtool...its the only way to do anything with the x10
Sent from my X10i using xda premium
Click to expand...
Click to collapse
laneyofdeath said:
If u install 2.1.71 bb u would have to be on 2.3 anyway not 2.1. Greg right pal u need flashtool in ur life it the only way to flash baseband currently for our phones. Follow flashtool-noobs guide you'll be fine (no need for z4 root its old, flashtool has one-click root)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok thanks i guess. i am not very good in flashtool
Devin-J said:
ok thanks i guess. i am not very good in flashtool
Click to expand...
Click to collapse
Honestly it not hard to use if u follow guide. It is almost impossible to break phone.
Sent from my X10i using XDA App
Devin-J said:
ok thanks i guess. i am not very good in flashtool
Click to expand...
Click to collapse
its very simple....just practice...
help pls
laneyofdeath said:
Honestly it not hard to use if u follow guide. It is almost impossible to break phone.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
gregbradley said:
its very simple....just practice...
Click to expand...
Click to collapse
hey guys, i think i found a way to root my 2.3 and install xrecovery. then i would not have the baseband problem (i had the baseband problem when i rooted 2.1 directly). It is using this software called superoneclick for the computer (i downloaded and opened it and saw a root button). does it work? if it works then it means that I do not have to learn how to use flashtool after all. I could get baseband 2.1.71 and install CM7 mod using xrecovery. No need of flashtool YAY! does the software superoneclick work for x10 if i use SEUS update to 2.3.3? :
Devin-J said:
hey guys, i think i found a way to root my 2.3 and install xrecovery. then i would not have the baseband problem (i had the baseband problem when i rooted 2.1 directly). It is using this software called superoneclick for the computer (i downloaded and opened it and saw a root button). does it work? if it works then it means that I do not have to learn how to use flashtool after all. I could get baseband 2.1.71 and install CM7 mod using xrecovery. No need of flashtool YAY! does the software superoneclick work for x10 if i use SEUS update to 2.3.3? :
Click to expand...
Click to collapse
I'm not sure whether that would work or not, but the flashtool nowadays has already evolved to an all-in-one tool, and you can do anything with it.
My recommended steps are:
1. Flash to stock 2.3.3 through flashtool/SEUS
2. Boot up phone and turn on USB debugging and unknown sources.
3. Open flashtool, you should be able to access the Advanced menu--->Root--->zergRush exploit to root your 2.3.3
4. Ask root perms then hit install xRecovery
5. Flash custom rom
These are always steps that I would recommend to people who are not too familiar with flashing.
I couldn't get superoneclick to work on gb think it was on eclair I managed to use it. Believe me USE FLASHTOOL.
Sent from my X10i using XDA App
laneyofdeath said:
If u install 2.1.71 bb u would have to be on 2.3 anyway not 2.1. Greg right pal u need flashtool in ur life it the only way to flash baseband currently for our phones. Follow flashtool-noobs guide you'll be fine (no need for z4 root its old, flashtool has one-click root)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
rite...........................
http://forum.xda-developers.com/showthread.php?p=10879507
Guide on flashtool
________________________________________
CheerS!
Milton
Wishing all a MeRrY ChRiStMaS --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v12.1"
using XDA premium
" hit thanks if I'm nice to you! "
help ps
hey everyone,
everyone seem to have no trouble with flashtool. but i have because everytime i try to root my x10 2.3.3, i only get a half-rooted phone with superuser, busybox and everything installed but no root access. i used FlashTool 0.2.9.1 and tried to root my x10 2.3.3 using the aZuZu Root Method (reference: http://forum.xda-developers.com/show....php?t=1196421)
so, now i am using a rooted 2.1 (i rooted with z4root not with flashtool) and installed xrecovery and custom rom 2.1. i want to use custom rom 2.3 but for that i need to root 2.3 but i cant root 2.3 with flashtool.
but when i see a root button available, i also see a button 'ask root perms' button. what is the difference?
thanks in advance.
Hello everyone..
Im using Clean V5 found here: Great rom and pretty fast!
But im having issues with the phone constantly rebooting after flashing V6.
I downloaded the zip, copied it to the sdcard, rebooted phone into recoverymode, made a backup. Choosed custom zip had it flashed and after i made a full wipe and rebooted.
It gets stuck at the blinking marker, and after awhile it reboots and loops.
Note, i can go back into recoverymode and reset.
tcntad said:
Hello everyone..
Im using Clean V5 found here: Great rom and pretty fast!
But im having issues with the phone constantly rebooting after flashing V6.
I downloaded the zip, copied it to the sdcard, rebooted phone into recoverymode, made a backup. Choosed custom zip had it flashed and after i made a full wipe and rebooted.
It gets stuck at the blinking marker, and after awhile it reboots and loops.
Note, i can go back into recoverymode and reset.
Click to expand...
Click to collapse
Are you use firmware 2.1.1.A.0.6?, if yes you must flash 2.1.1.C.0.0 firmware
Elwino2.3 said:
Are you use firmware 2.1.1.A.0.6?, if yes you must flash 2.1.1.C.0.0 firmware
Click to expand...
Click to collapse
Well since Im using V5 I should have the compatible firmware.
I cant check it either in my phones settings meny since it says Clean0.0.
tcntad said:
Well since Im using V5 I should have the compatible firmware.
I cant check it either in my phones settings meny since it says Clean0.0.
Click to expand...
Click to collapse
Maybe you should re-flash again 2.1.1.C.0.0 original firmware. With this way you never got the problem
Sent from my U20i using XDA
Elwino2.3 said:
Maybe you should re-flash again 2.1.1.C.0.0 original firmware. With this way you never got the problem
Sent from my U20i using XDA
Click to expand...
Click to collapse
I perhaps could. I have a backup of the original firmware on my computer. That should work eh?
Or where can i find a standard/generic nordic firmware?
tcntad said:
I perhaps could. I have a backup of the original firmware on my computer. That should work eh?
Or where can i find a standard/generic nordic firmware?
Click to expand...
Click to collapse
Just install v5 and flash via seus or pc companion and u will get 2.1.1.C.0.0 firmware (i have tried this)
Sent from my mimmi using xda premium
I recommend you use SEUS
Sent from my mimmi using xda premium
Look here: http://forum.xda-developers.com/showthread.php?t=1101332
Sent from my mimmi using xda premium
Thanks! I'll give it a try
Edit: No working link at all..
tcntad said:
Thanks! I'll give it a try
Edit: No working link at all..
Click to expand...
Click to collapse
Just press thanks button
Sent from my mimmi using xda premium
Elwino2.3 said:
Just press thanks button
Sent from my mimmi using xda premium
Click to expand...
Click to collapse
Love your dedication of helping
I just found a clean backup on my computer Ill restore and see what firmware it is and try V6 this weekend.
Edit:
The backup I had didnt have matching MD5 for some reasons but I managed to use SEUS and phone was restored to original firmware
I just flashed V6 and I do have compatible firmware "C.0.0" and holy cow it works!
Maybe the term 'firmware' is confusing. Because V6 -ROM- contains a dualtouch module that only works with the 2.1.1.C.0.0 -KERNEL- , it can cause problems.
There's a link in the first post of the rom thread (read carefully) to the right kernel (.ftf file) which you can flash using flashtool.
Sorry I didn't see this before, since V6 I'm just using the phone ;-)
Sent from my phone