Hi guys,
i used a sim unlock code to unlock the ATT locked Atrix 4g, for use with a european sim card (mobitel, slovenia). it unlocked fine and i could call, but the wifi stopped working it just didnt scan/find or even connect to remembered wifis (home router), which worked perfectly before the unlock. so than i thought it might help to factory reset it, and now the problem persists and i cant even finish the wizard, cuz it wouldnt connect to the cellular (which we have 2g and 3g here) and the wifi has the same problems (so initially it finds all wlans, than after like a few secs it looses them all, i can turn off the wifi and turn it on again and the same thing happens). so i am wodering if anyone has any idea how i could rescue the phone ...
thanks in advance
ok guys i did a hard reset and put in a nonworking sim (doesnt connect to network) and i got the wifi back to working and managed to activate motoblur again. so after that ive put my working sim card in again (3g+ hsdpa+ able), and the wifi stops to work again/behaves the same as i described before. terrible ... anyone has an idea how to fix that ?
ok, more problems, now after ive put the working sim inside and the wifi stopped working, i tried with the nonworking sim (that wifi worked great before with), and the wifi isnt working with the sim it was working before either and even if i try without any sim it doesnt work... ill try with a third sim now and if it wont work ill hard reset it again
Same problem
I have the same exact issue. Anyone know what to do? I can't imagine that this is "bricked" because everything else works fine... thoughts?
where did you guys get the unlock code from?
Actually, I have a similar problem. After entering unlock code the phone accepts my SIM card, but I cannot activate 3G connection. GSM is working, try to call my other phone. APN settings are correct.
In the "hidden" settings menu (*#*#4636#*#*) I cannot chose between radio bands, but only the USA radio band.
Any ideas? Will I need to root it or even put a custom ROM (if it exists)?
So you guys used an unlock code from someone other than the carrier and are now having issues?
Wish I could help on this one. If you used an unlock code from someone other than the carrier, I would contact motorola support.
If you used a piece of software, I would wager that the software broke something and you might as well warranty return it for another.
Sent from my MB860 using XDA App
DarrellRaines said:
So you guys used an unlock code from someone other than the carrier and are now having issues?
Wish I could help on this one. If you used an unlock code from someone other than the carrier, I would contact motorola support.
If you used a piece of software, I would wager that the software broke something and you might as well warranty return it for another.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Don't be offended, but I don't think this is the case. AT&T locked their phone to their network with standard network code (as seen in many other phones for years) so that "alien" SIM card would not work. But, additionally, since the AT&T has some value added services on their data plan (like wifi tethering) they made some accommodations (read: locked parts of the android configuration).
I am not a developer, this is just my guess, but it seams sane and probable.
gogy22 said:
Don't be offended, but I don't think this is the case. AT&T locked their phone to their network with standard network code (as seen in many other phones for years) so that "alien" SIM card would not work. But, additionally, since the AT&T has some value added services on their data plan (like wifi tethering) they made some accommodations (read: locked parts of the android configuration).
I am not a developer, this is just my guess, but it seams sane and probable.
Click to expand...
Click to collapse
No offense taken. This is why I asked about a program. Using an unauthorized code to unlock it may over write a.setting or file. Its also possible that someone broke something using adb.
Best solution, warranty it and try again
Sent from my MB860 using XDA App
ok. anyone with unlocked phone has a wifi problems besides these 2 nice people ?
I don't have a WiFi problem, I have a 3G problem
Sent from my HTC Desire using XDA App
gogy22 said:
I don't have a WiFi problem, I have a 3G problem
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA .....
can you guys tell us what website you use to get your unlock codes from so we can avoid them? thanks
man.. this forum is dead.
even the OP stopped coming here to check his post :/
Based on your replies, I'm guessing you've never unlocked a phone before...
Unlocking a phone to be used for a different carrier affects nothing else but the ability to only use the SIM Card of the carrier you bought the phone from.
To unlock a carrier-locked Motorola phone, you simply need a "Network Unlock PIN" which is an 8 or 16 digit code that you enter to unlock the phone to any network. There is no software installation ivolved in the process.
A 3G issue will occur when your carrier doesn't support the 3G bands that the Atrix supports. Which would be: 850/1900/2100. If your carrier doesn't use any of these bands for their 3G network, then of course you are going to have 3G issues.
The Wi-Fi problem that the OP is having may be as simple as him having an antenna QA issue. But it could never be the Unlock Code.
Unlocking your phone and using another carrier other than AT&T has nothing to do with Wi-Fi issues...
DarrellRaines said:
So you guys used an unlock code from someone other than the carrier and are now having issues?
Wish I could help on this one. If you used an unlock code from someone other than the carrier, I would contact motorola support.
If you used a piece of software, I would wager that the software broke something and you might as well warranty return it for another.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
DarrellRaines said:
No offense taken. This is why I asked about a program. Using an unauthorized code to unlock it may over write a.setting or file. Its also possible that someone broke something using adb.
Best solution, warranty it and try again
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Beach_Head said:
The Wi-Fi problem that the OP is having may be as simple as him having an antenna QA issue. But it could never be the Unlock Code.
Unlocking your phone and using another carrier other than AT&T has nothing to do with Wi-Fi issues...
Click to expand...
Click to collapse
I got my unlock code from cellunlock.net. It unlocked my phone just fine. Don't use that as a reason to avoid cellunlock.net. Unlocking is unlocking.
I have swapped back and forth between my prepaid sim and My AT&T SIM about 5 times so far.
WiFi disconnects almost immediately when I try to connect with my prepaid sim inserted, but I can make calls. (Atrix also displays H+, which can't be right)
With my AT&T sim everything works fine, solid as a rock.
I may do a factory reset to test things, but I have a feeling it has something to do with drivers or the network stack on the atrix, or perhaps because my prepaid sim has no data plan. It certainly isn't a hardware problem with the antenna. I am afraid to do a factory reset on the atrix while I am out of the country, considering that it requires network access to unlock itself.
To the original poster:
When you put a non-connected SIM into the phone, if you do a power reset again, the wifi comes back up solid again.
Also, is there some way we can request a merge of these two threads?
http://forum.xda-developers.com/showthread.php?t=986499
how come only you 2 have this problem ? do you 2 live in the same country ?
this is really surprising :/
It really is quite weird...
ll_l_x_l_ll said:
how come only you 2 have this problem ? do you 2 live in the same country ?
this is really surprising :/
Click to expand...
Click to collapse
I was merely suggesting that it could be a multitude of things, but never the unlocking code or the process of unlocking itself.
Also, it can't be your SIM because your SIM has nothing to do with Wi-Fi. If we were talking about GSM and 3G then SIM cards come into play. Other than that, no way.
Have you tried using the phone without a SIM? Do you get the same problems?
wstutt said:
It certainly isn't a hardware problem with the antenna. I am afraid to do a factory reset on the atrix while I am out of the country, considering that it requires network access to unlock itself.
To the original poster:
When you put a non-connected SIM into the phone, if you do a power reset again, the wifi comes back up solid again.
Also, is there some way we can request a merge of these two threads?
http://forum.xda-developers.com/showthread.php?t=986499
Click to expand...
Click to collapse
Beach_Head said:
I was merely suggesting that it could be a multitude of things, but never the unlocking code or the process of unlocking itself.
Also, it can't be your SIM because your SIM has nothing to do with Wi-Fi. If we were talking about GSM and 3G then SIM cards come into play. Other than that, no way.
Have you tried using the phone without a SIM? Do you get the same problems?
Click to expand...
Click to collapse
I agree that it has nothing to do with the SIM or unlocking.
I just tested. I get the same problem with no SIM inserted. Screw it.. doing a factory reset and seeing what happens.
Edit:
Still does the same thing. But now I have to re-activate app sideloading.
Also, you can reactivate over wifi, which is nice.
Related
i bought a new in the box samsung vibrant off craigslist to use on simple mobile, i unlocked the vibrant it works on both at&t and H20 but not t-mobile or simple mobile. anyone out there have a solution i can't call t-mobile since i am not an account holder and advice would be appreciated
bad simcard or if the phone is registered on diferent carrier put timobile sim card and try to unlock your phone with it
its not the sim card it works fine in my mytouch 4g with simple mobile, the sim is not blocked i believe the phone must be block from system by imei
put the simcard in and unlock the phone again ! ! duhh
???????
bartek25 said:
put the simcard in and unlock the phone again ! ! duhh
Click to expand...
Click to collapse
sarcasim is a good thing but maybe you aren't comprehending what i am saying duhh!!
i own NSPRO box and have unlocked the galaxy S phones quite frequently, the phone is sim unlocked for any sim card or gsm carrier, what i am saying has nothing to do with unlocking with the sim card in( which i tried for ****s and giggles). the problem is the vibrant is not recognized on the network , i have tried my sim and several other t-mobile sims the phone doedn't receive signal on t-mobile network or simple mobile( which is a NVO of t-mobile)so what i am asking is does t-mobile block imei's from their network and is their a solution other then changing imei of the phone which i do not wish to do although i can change imei i will not since it is illegal.
the problem
let me clarify it actually says on the screen
"not registered on network"
anyway to register it on system???
its unlocked and works on at&t, h2o and all other gsm carriers except t-mobile and simple mobile
clone another imei, that will solve this problem, There is an app that allows you to give you a new I D # to your phone
I am same problem here everytime try to make call it says "Not Registered on the Network", SIM card works fine on different phone, also other SIM when inserted on Vibrant gives same message.
Under Settings> Wireless> Mobile network settings does not allow access...
Can someone help resolve this situation.
Thanks,
I am also
having the same problem. I purchased a used Vibrant from my friend whom defaulted on his bill so he sold his phone to me. When I attempt to use the T Mobile prepaid SIM or a regular T Mobile SIM it will not allow me to connect to the network. It stays on (Searching) or (No Service) but the date and time updates so I know it is connecting, just not able to use the network. Is there anyway to get around this problem or do I need to root and unlock to go to another carrier?
Hi guys I am having similar issue, please help
I was using bionix 1.3.1 by team whiskey, whats your advice do I change to ICS, will that solve the problem or simple radio upgrade will solve the matter? I have gone through several sites and found that this problem is with many android mobiles since last 2-3 years. Is there no solution to this yet! I have tried Airplane mode, removing battery, downloading autocut and all those basic methods but to no help ...
I have the same problem, did anybody find a solution?
I tried everything, flashed to stock, GB, ICS, JB.
My phone is unlocked and it only works on AT&T, the sim card is good, as I'm using it on my backup phone.
alberto02005 said:
I have the same problem, did anybody find a solution?
I tried everything, flashed to stock, GB, ICS, JB.
My phone is unlocked and it only works on AT&T, the sim card is good, as I'm using it on my backup phone.
Click to expand...
Click to collapse
So you have a T-Mobile sim that won't work on a vibrant?
???
samsgun357 said:
So you have a T-Mobile sim that won't work on a vibrant?
???
Click to expand...
Click to collapse
Same here. This all happened when I let my friend borrow my phone to put his SIM on it. It was a prepaid Simple Mobile SIM. It didn't work but after I went to put my SIM card back into my Vibrant, the phone never got service.
Funny thing is, my SIM works on one of my older phones, so I know the SIM still works, but my Vibe gets messages like "out of service" and "not registered on network" even through it still has some bars.
I think the problems relates to this thread: http://forum.xda-developers.com/showthread.php?p=37703090#post37703090
Somehow the bands on your device is messed up so you never get a signal. Not sure how to fix it but any solutions would be great.
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Did.you use software to unlock it or just a code?
Sent from my MB860 using XDA App
just a code
crnkoj said:
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Click to expand...
Click to collapse
I have the exact same problem.
My phone is unlocked and can make calls, but WiFi disconnects me almost immediately. The phone also thinks my prepaid sim has H+ connectivity.
When I go back to my AT&T SIM, I have to do a reboot or 2 to get it cleared up, and then WiFi works again.
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
crnkoj said:
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
Click to expand...
Click to collapse
i also have a friend in saudi arabia who got the unlock code and the wifi is working fine.
only 2 people reported this so far. i guess it could be a hardware problem ? because the other user beside you have this problem even without sim installed " or that what i understood from him "
you can check the other thread too. maybe someone could post something usefull.
hmm i see, where did you find that thread, i was sort of searching for ages and didnt find any issues like that =/
Ye i mean i have this problem without a sim aswell if i dont factory restore the phone, after i do that without a sim card however the WiFi works great...
so i am kind of reluctant to believe it being a hardware issue due to this, sort of software specific issue (at least i think if it would be hardware related, the wifi would start working as soon as i go to airplane mode/take out the sim and a factory reset wouldnt be necessary), or do you think that my theory is rather flawed in thinking that?
and ye the problem is im in europe now and as the reps at motorola support told me, i would have to send the phone to the US for warranty and they would only send it back to an address within the US =/ i will try my luck with the german and uk support site, to see if they could do something for me.
thanks for your time guys tho
hey guys what do you think if i would use this code:
* 2767 * 3855 #
Think before you give this code. This code is used for formatting the original manufacturer. This will delete all files and settings, including internal memory storage. This will also reinstall the phone’s firmware.
To restore it to manufacturer (will it request an unlock code again after that?) cuz i have 2 codes to unlock but the first one worked, so maybe if i woudl try it with the second one than?
I just unlock my atrix with the code from cellunlock, works great and wifi is fine as well. Would like to know where u get the code, and how it turns out if u try reset to default using the combo. Pls update. Ths
Sent from my MB860 using XDA App
I'm having the same issue of not being able to connect to WiFi.
I bought the phone in Las Vegas with an AT&T - pay as you go (no contract).
I bought an unlock code from SwiftUnlocks, and used my Rogers SIM, which appeared to work. I then rooted the phone.
Using the Rogers network, I've been unable to use any sort of data. Phone calls and texts work fine. Then I noticed that my WiFi was not working properly. It would try to obtain an IP address, but couldn't connect. After several reboots, I got the phone to connect to WiFi for a few minutes.
I just did a factory reset, now I'm unable to connect to any network or WiFi to login with MotorBlur, so I can't really use the phone now.
I'm quite frustrated and not sure what else I can do.
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Squig80 said:
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Click to expand...
Click to collapse
i am getting my phone in few hours, then i am going to order from cellunlock a code and wait for 2 days to get the lock. unless someone has a spare code he can pm me i would be thankful.
the code is IMEI specific, cant give oyujust spare codes
secondly, to get wifi to work you have to remove your sim card, put in the att or a nonworking sim card and do factory reset, than wifi will work. and you can load all the stuff via wifi, and than just put in your working sim and use the phone as a phone +3g data (the 3g data works great for me to be honest)
oh i got my code from swiftunlock but i dont think that matters, they all get it from teh same provider im pretty sure.
and if anyone si wondering t he sbf update did NOT fix my wifi problem. i ahve tried several wifi fix programs and neither worked aswell, the fxr wifi did some stuff that the phone now sees the networks but still cant connect.
this is to update everyone that i got the phone. had an issue about the screen doing lots of flickering. contacted amazon and sent it back.
in the whole process so far i lost around 60$ between importing and exporting the phone. all in all. i will stick with my iphone 4 for now. its a good phone.
but i cant take this sadness all over again if i imported another phone with an issue with it as well. i am too OCD for my own good.
so true what you say, tho im coming form a nokia 6220 classic, a bit older than the iphone 4
Hey GUYS...
I have the same problem.... My Bell Atrix WiFi works great with my Rogers SIM (I had someone unlock it for me), but when I put in my Qatar Qtel SIM, it stops working, and goes into that connect/scan/disconnect loop.
Any solutions?
Search in the dev forym there is a solution for it
crnkoj said:
Search in the dev forym there is a solution for it
Click to expand...
Click to collapse
Thanks. Found it: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
help mine stoipped working
[16:53] <arana> hi guys i need help with an unlocked atrix 4g att , that was ulocked with att code, then in order to use recovery i got one of the files here http://forum.xda-developers.com/showthread.php?t=1204500
[16:53] <arana> now it is unlocked but wifi is stuck at obtaining ip address
[16:53] <arana> i tried the solutoin here: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
[16:53] <arana> but still not working
[16:54] <arana> i'll appreciate any help
[16:56] <arana> if possible i would like to put the stock recovery partition if that would fix things, or unlock it with official sbf but i can find it
[16:56] <arana> i used zomgunlock-lite.sbf to unlock
any help?
my carrier is telcel (mexico) and wifi was working fine before i "unlocked" the phone, thank you for any help
Please if you found solution reply here, but read at least first post before.
1. Does AT&T SIM reactivate WiFi, after other operator SIM used? - Yes (in my case), but you may need to reboot (soft) 2-3 times.
2. Does Motorola Update 1.57 solve the WiFi problem? - NOT IT DOES NOT.
3. Why part of unlocked phones have WiFi problem and others not? - Open question, as it is NOT a hardware failure, it is somehow related to unlocking process.
4. Is there any solution at all? - Honorable member crnkoj is developing the solution in this thread
IMHO WiFi related issue currently deserves sticky. Also it would be perfect to have one stop FAQ for WiFi related issues.
Im using an unlocked atrix n the wifi is working fine...
You in the lucky group. Mine is unlocked and none of the many potential solutions get me on wifi (short of tossing a broken sim in, which is a pain...)
nazrin313 said:
Im using an unlocked atrix n the wifi is working fine...
Click to expand...
Click to collapse
RootManOne said:
Dear Moderators,
I've red almost 200 posts but still have no answer for following questions.
1. Does AT&T SIM reactivate WiFi, after other operator SIM used?
2. Does Motorola Update solve the WiFi problem
3. Why part of unlocked phones have WiFi problem and others not
4. Is there any solution at all.
IMHO WiFi related issue currently deserves sticky. Also it would be perfect to have one stop FAQ for WiFi related issues.
Click to expand...
Click to collapse
1. Apparently people who have one, reported it reactivates wifi after a few reboots, otherwise you have to put in a broken sim and do a factory restore to get it to work
2. It does NOT (not the leaked 1.5.2, not the leaked 1.2.6 and not the prerelase 1.5.7)
3. i think it has something to do with a config file or an app that blocks it (altho im leaning toward a config file that gets from the carrier some info and not really blocks but more like a bug disables wifi, because of some conflict)
4. you can use your phone with sim card and 3g/4g data, while preinstalling everything before on wifi, or just use it a a small wifi only "tablet". I am unfortunately not that good with android/linux to figure it out on my own (i sort of got the phone into a boot loop 3 times now, trying to delete apps/ change config files in the /system dir). One of the forum/irc users is nice and tries helping me , but he doesnt have the phone himself so, hard thing ...
5. Hopefully the released source codes will help, doing a semi custom rom without the att bloatware, which could probably fix the issue.
What about the new update that was just released does that fix the problem?
It seems up to now there is no solution for wifi problem. Several reboots doesn't work for me. Please respond if someone was able to succeed.
BMW, maybe read the 2nd point of my above post, no update fixes it.
crnkoj said:
BMW, maybe read the 2nd point of my above post, no update fixes it.
Click to expand...
Click to collapse
I thought the new update started with a 4 but now I figured it out sorry.
It was big buzz week ago on broken wifi on unlocked AT&T phones. Now I can't find even the thread on that. Did you people find solution?
I have upgraded to 1.57 and it is definitely not a solution.
I tried hard reset with non-working card and wifi on hardware level works perfect. As soon as I've put working SIM in, it stopped and even reversing to non-working sim doesn't help. hard resetting every time is not a solution.
Still waiting for final solution.
I unlocked my Atrix in Australia. I shall walk you though my steps to see if you can pick out anything specific. I was very worried about the WiFi issue so i took many precautions.
I bought the code from Cellunlock.net - using the android50 code to bring it to $20
in the meantime I used an old, inactive SIM in the phone and on boot I would just hit dismiss on the network unlock screen and run the phone on WiFi on my home wireless. (WPA2 key)
When my unlock code arrived (2 days) I went to the wireless settings, DELETED my wireless network from being saved.
TURNED OFF WiFi entirely
Turned phone off properly and replaced the SIM card with my active Vodafone AU SIM
on the network unlock screen, I used the first code out of the two they provided and it was accepted
went back and re-added my wifi network, and doneeee all is working well.. hope this helps someone somewhere.
Thanks a lot DarkRyoushii
Problem is that I received my Atrix already unlocked. I contacted Cellunlock.net if it is possible to unlock it second time, but they responded it is impossible.
What gives me hope, Motorola has to sell originally unlocked phones and their ROM should be free of this AT&T crap. So using that ROM supposedly will help.
I have an AT&T Atrix and the unlock code didn't adversely affect my Wifi. I've actually never had an Android that locked onto Wifi as well as my Atrix. It's tight as hell. Never, ever drops!!
I don't see the correlation between the two but maybe there is some weird quirk. Not denying anyone though. I just wonder what the heck Motorola did to the framework to cause that to happen. Weird.. hope it gets patched up too.
I hope this gets fixed soon. I have an atrix with the sim unlocked. I cant connect to wifi, and I cant get passed the motoblur to set debugging and root the phone. This is very frustrating. I'm in qatar so I dont have a att sim, nor do I have a broken sim either. I guess I have a $600 dollar paperweight.
mine is perfect
wargame1 said:
I hope this gets fixed soon. I have an atrix with the sim unlocked. I cant connect to wifi, and I cant get passed the motoblur to set debugging and root the phone. This is very frustrating. I'm in qatar so I dont have a att sim, nor do I have a broken sim either. I guess I have a $600 dollar paperweight.
Click to expand...
Click to collapse
Don't put any sim in it at all then turn it on. You should be able to connect to wifi that way and get past the setup.
I don't have an atrix yet but I heard that this works. Goodluck.
wargame1 said:
I hope this gets fixed soon. I have an atrix with the sim unlocked. I cant connect to wifi, and I cant get passed the motoblur to set debugging and root the phone. This is very frustrating. I'm in qatar so I dont have a att sim, nor do I have a broken sim either. I guess I have a $600 dollar paperweight.
Click to expand...
Click to collapse
hi friend
i have the same problem, if u find a solution, let me know, thx
zeidof said:
hi friend
i have the same problem, if u find a solution, let me know, thx
Click to expand...
Click to collapse
Did you try my solution it should work. ( it was right above your comment)
Don't put any sim in it at all then turn it on. You should be able to connect to wifi that way and get past the setup.
Your wifi wont be fixed after you put a sim in but it should get you past the motoblur sign up.
zeidof said:
hi friend
i have the same problem, if u find a solution, let me know, thx
Click to expand...
Click to collapse
Guys, if you have 3g (or in fact any) data available on your sim its not a problem. When the motoblur setup tips up, click the settings hard button (the one to the left) choose "configure apn" (or something similar), put in the data you get from your carrier and bam, you should be able to finish the setup.
Wargame1 I bought several sims at eBay and is planning to check with them. As soon as they work, I'll let you know and even send you one from Baghdad.
Wifi problem is not solved yet. When Motorola is going to start selling originally unlocked versions? Their rom should help.
RootManOne said:
Wargame1 I bought several sims at eBay and is planning to check with them. As soon as they work, I'll let you know and even send you one from Baghdad.
Wifi problem is not solved yet. When Motorola is going to start selling originally unlocked versions? Their rom should help.
Click to expand...
Click to collapse
just try it with mobile data man, youll be able to activate motoblur...
and erm, you probably wont be able to install the unlocked rom on the att atrix, sicne you cant change the att/bell roms on the phones either .... maybe just a /system reinstall, like the Gingerblur/Gladiatrix mods
I tried to get my phone unlocked today, however ever since then my phone hasn't been able to connect to any networks. I had to give my Imei number to get in unlocked, is there some way this could have been used to block my phone?
johno86_4 said:
I tried to get my phone unlocked today, however ever since then my phone hasn't been able to connect to any networks. I had to give my Imei number to get in unlocked, is there some way this could have been used to block my phone?
Click to expand...
Click to collapse
Yes in theory it could. Try the old sim and see if it works.
To block an imei requires access to the network systems, although you could phone them up and perhaps maliciously block an imei.
Did you use a reputable unlocker?
I used one off ebay however they had 15000 positive feedback.
I rang T-mobile and they say my phone is not blacklisted but its also not been unlocked. I dont know if this is true as when I put my unlock code in it said unlock ok and now when I put another network sim in it doesnt ask for the code. Ive since tried to use an orange sim card in it and this works but I dont know if this is anything to do with the fact that Orange and T-mobile have merged.
If it isnt unlocked then i dont know where to put a new unlock code in.
johno86_4 said:
I used one off ebay however they had 15000 positive feedback.
I rang T-mobile and they say my phone is not blacklisted but its also not been unlocked. I dont know if this is true as when I put my unlock code in it said unlock ok and now when I put another network sim in it doesnt ask for the code. Ive since tried to use an orange sim card in it and this works but I dont know if this is anything to do with the fact that Orange and T-mobile have merged.
If it isnt unlocked then i dont know where to put a new unlock code in.
Click to expand...
Click to collapse
Lol you are fine.
Tmobile don't know it is unlocked. It worked fine if the sim doesn't ask for the code now.
If an orange sim works then phone is OK. What is original problem again?
Lol sorry I havent been very clear.
Ive bought a Tesco mobile sim and that is what I want to use however when I try this sim it wont connect to the network. Ive also tried a O2 sim with the same result however an Orange sim does work
I really have no idea what could be causing it and ringing Tesco/T-mobile has been no help at all lol.
Might be a stupid question but are you sure you can get Tesco Mobile signal? Both Tesco Mobile and o2 use the o2 network. So that's probably worth checking.
snailydale said:
Might be a stupid question but are you sure you can get Tesco Mobile signal? Both Tesco Mobile and o2 use the o2 network. So that's probably worth checking.
Click to expand...
Click to collapse
Ive tried it in my girlfriends iphone and it works perfectly so I cant imagine its the signal. I'm totally flummoxed, the only thing I can think of is if the phone isnt unlocked, but then why then does the orange sim card work?
OK I've come to the conclusion that it hasn't been unlocked and the reason the Orange sim card works is something to do with their networks being joined. If this is the case is there a way of re-entering the sim unlock code?
TMOBILE has blocked your sim, you may need to root
johno86_4 said:
OK I've come to the conclusion that it hasn't been unlocked and the reason the Orange sim card works is something to do with their networks being joined. If this is the case is there a way of re-entering the sim unlock code?
Click to expand...
Click to collapse
TMOBILE has blocked your sim, you may need to root. My experience is this: I have a rooted HTC that works fine, however when I put the sim in my S2 or a second T-Mobile phone I get the error message "cannot connect to network" even though I have 5 bars.
I have reviewed similar threads for a few days but have not found any answers. The simple question I have is in the title:
Can you unlock the ATT Atrix without an unlock code.
However the situation is a bit more complicated and ill explain.
I have been traveling the past few months and was in Costa Rica for a month. I decided to purchase a local SIM so I could use my phone without paying ridiculous ATT roaming charges. I inserted the SIM and it was locked, unaware of the network lock I inserted my personal code thinking that may be it. No luck and returned to my old ATT SIM. At this point it still worked but a few days passed and I tried again, still no avail so I contacted ATT. It just so happened the 6 month mark was coming up from the original purchase date of my phone so they would provide the unlock code in 4 days time. I waited and finally received, after inserting the code it did not work and I contacted ATT back to assure they provided the proper code as they had to send me a replacement phone a few months prior due to my original Atrix crapping out. They checked it out and determined it was correct but it never worked. I finally inserted my original ATT SIM back into the phone and it also requested network unlock code. Now I am back in the states and even with the original ATT SIM it still requests for the network unlock code. I tried unlocking and flashing with CM7 beta and STILL requests unlock code. So basically the phone is useless for network data but will work fine as a mini tablet i suppose connected to WIFI.
So with that explanation does anyone have any idea on bypassing this or removing this entirely, not even to use overseas but just on the ATT network!
Additionally
ATT provided me with another Atrix to alleviate my troubles so im not entirely phoneless. However I would like to sell one of these and possibly purchase the GS2 0_o
I have contacted 3 cell phone unlocking sites explaining the situation and only one has responded but not with any answers.
HELP!
if you got a new phone, is it still asking for a network unlock code?
No. Its working fine, but I still have this perfectly good working phone I would rather use and sell the brand new one. Unless I cant get rid of this unlock problem I suppose Ill sell it as is. Any takers?
Hi, I talk to att once when i want to unlock my atrix and they told me if the phone is more than six months old the give you the unlock code for free.
so for the atrix if that is your phone you can ask att for your code since august 21.
just call att customer support.
hope this help.
try a diff sim card with data plan and see if it still asks for code
or try flashing a custom rom
I suppose I was not clear in the OP. ATT DID provide this code for me. I did flash a custom rom already.
As far as using a different SIM card I tried to use a second SIM that ATT provided and still nothing.
I am assuming this is a very unique situation and probably wont find any answers unless someone has successfully unlocked the phone by flashing some special ROM.
Flashing a ROM of any kind will never sim-unlock your phone.... ever. period.
The only way to resolve this is through AT&T. The only way to sim-unlock is with the code it requests.... must have proper code. That is the only way. So, I would talk to AT&T about it, in person, at a local store.
I unlocked the inspire 4G simple by rooting and flashing a custom rom didnt ask for network password after that it worked on tmobile
With edge service no. 3g or 4g different bands between tmobile and att
Sent from my HTC HD2 using XDA Premium App
jussuh said:
I unlocked the inspire 4G simple by rooting and flashing a custom rom didnt ask for network password after that it worked on tmobile
With edge service no. 3g or 4g different bands between tmobile and att
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
highly doubt that....
when does it ask you for the network code? can u provide a screen capture?
jgc121 said:
Flashing a ROM of any kind will never sim-unlock your phone.... ever. period.
The only way to resolve this is through AT&T. The only way to sim-unlock is with the code it requests.... must have proper code. That is the only way. So, I would talk to AT&T about it, in person, at a local store.
Click to expand...
Click to collapse
Just the info I was looking for. Basically the phone is boned in that case. Spent a good with with ATT advanced tech support and motorola to no avail.
What I do want to know is WHERE this information is stored out of curiosity. It seems the modding community would have tinkered with some hacks to remove the sim lock at some point.
wyldkard said:
when does it ask you for the network code? can u provide a screen capture?
Click to expand...
Click to collapse
Tried to screen shot it but it wont allow in the screen. The request comes as soon as I turn the phone on. If I dismiss it I can use the phone I just wont have cellular access.
Ok so I am reposting and not editing as I feel this deserves a bump.
I got my new Atrix unlock code from ATT today and tried it on the new Atrix I received and that one ALSO will not unlock.
Is there ANY ATT Atrix sim unlocked and if so how did you go about doing it? I have only found one thread and no response via PM.
How to SIM unlock Atrix!
I have read both your post and I believe you used a ATT sim card that was not in use or a GO phone Sim card. Am I correct so far? To sim unlock you have to insert a non ATT sim card!! No go phone sim card or a non active att sim!
Call one of your friends and borrow a Verizon sim or Tmobile sim. You only have 5 tries to do this. So as for your first Atrix I believe it is already locked permanently to ATT. Dont ruin your second Atrix.
katinatez said:
I have read both your post and I believe you used a ATT sim card that was not in use or a GO phone Sim card. Am I correct so far? To sim unlock you have to insert a non ATT sim card!! No go phone sim card or a non active att sim!
Call one of your friends and borrow a Verizon sim or Tmobile sim. You only have 5 tries to do this. So as for your first Atrix I believe it is already locked permanently to ATT. Dont ruin your second Atrix.
Click to expand...
Click to collapse
Well I found that if you push #073887* in the dialer it will actually prompt you for the unlock code. I tried this with NO sim in at first and that is when it said it was unsuccessful. However late last night I inserted my ATT SIM back in and tried again just for ****s. Entered in #073887* and typed the unlock code and viola, it worked. Interesting information for anyone who wants to unlock there Atrix WITHOUT another carriers SIM!
But back to my original issue. I wouldn't mind if the original atrix was locked to ATT, at least I would still be able to use it. The problem is that it wont work with ANY SIM. My thoughts is that it is a glitch and locked the phone to... nothing?
To make matters worse I emailed cellunlocker.net explained the issue and they said they thought if they requested a carrier unlock code it would work. Paid the 20 and 10 minutes later they sent me the same unlock code ATT had provided. Now the hassle of obtaining a refund.
are you selling the phone?
komakos96 said:
are you selling the phone?
Click to expand...
Click to collapse
Yea. Both.
you have to use a *different* sim card than your regular carrier uses (ex - I'm on AT&T, so i used a Boost Mobile Sim to unlock my Atrix) You cannot use YOUR sim to sim-unlock.
jgc121 said:
you have to use a *different* sim card than your regular carrier uses (ex - I'm on AT&T, so i used a Boost Mobile Sim to unlock my Atrix) You cannot use YOUR sim to sim-unlock.
Click to expand...
Click to collapse
Yes you can, by the method I explained in my previous post. It works!
There may be some confusion. The one im referring to (the original ATRIX) will not unlock with an ATT sim, a TMOB sim, a verizon SIM, or even a Costa Rican SIM. NO matter WHAT the SIM is in the "original" phone it always prompts me for a SIM unlock password. Like I said I believe it to be a glitch, intending to lock it to the ATT SIM but in reality it locked it to NO SIM.
So to restate.
YES you can unlock an ATT Atrix with only an ATT SIM in the phone using the method I explained. ( I did it with the phone in my hand right now)
and
NO my original Atrix will not unlock regardless of SIM installed or method.
i will send you a p.m with my offer
Just out of curiousity did you ever set up the sim card lock feature in the location and security settings. It will ask you for the unlock code every time you turn your phone on...shot in the dark here....
Sent from my MB200 using XDA App