Please if you found solution reply here, but read at least first post before.
1. Does AT&T SIM reactivate WiFi, after other operator SIM used? - Yes (in my case), but you may need to reboot (soft) 2-3 times.
2. Does Motorola Update 1.57 solve the WiFi problem? - NOT IT DOES NOT.
3. Why part of unlocked phones have WiFi problem and others not? - Open question, as it is NOT a hardware failure, it is somehow related to unlocking process.
4. Is there any solution at all? - Honorable member crnkoj is developing the solution in this thread
IMHO WiFi related issue currently deserves sticky. Also it would be perfect to have one stop FAQ for WiFi related issues.
Im using an unlocked atrix n the wifi is working fine...
You in the lucky group. Mine is unlocked and none of the many potential solutions get me on wifi (short of tossing a broken sim in, which is a pain...)
nazrin313 said:
Im using an unlocked atrix n the wifi is working fine...
Click to expand...
Click to collapse
RootManOne said:
Dear Moderators,
I've red almost 200 posts but still have no answer for following questions.
1. Does AT&T SIM reactivate WiFi, after other operator SIM used?
2. Does Motorola Update solve the WiFi problem
3. Why part of unlocked phones have WiFi problem and others not
4. Is there any solution at all.
IMHO WiFi related issue currently deserves sticky. Also it would be perfect to have one stop FAQ for WiFi related issues.
Click to expand...
Click to collapse
1. Apparently people who have one, reported it reactivates wifi after a few reboots, otherwise you have to put in a broken sim and do a factory restore to get it to work
2. It does NOT (not the leaked 1.5.2, not the leaked 1.2.6 and not the prerelase 1.5.7)
3. i think it has something to do with a config file or an app that blocks it (altho im leaning toward a config file that gets from the carrier some info and not really blocks but more like a bug disables wifi, because of some conflict)
4. you can use your phone with sim card and 3g/4g data, while preinstalling everything before on wifi, or just use it a a small wifi only "tablet". I am unfortunately not that good with android/linux to figure it out on my own (i sort of got the phone into a boot loop 3 times now, trying to delete apps/ change config files in the /system dir). One of the forum/irc users is nice and tries helping me , but he doesnt have the phone himself so, hard thing ...
5. Hopefully the released source codes will help, doing a semi custom rom without the att bloatware, which could probably fix the issue.
What about the new update that was just released does that fix the problem?
It seems up to now there is no solution for wifi problem. Several reboots doesn't work for me. Please respond if someone was able to succeed.
BMW, maybe read the 2nd point of my above post, no update fixes it.
crnkoj said:
BMW, maybe read the 2nd point of my above post, no update fixes it.
Click to expand...
Click to collapse
I thought the new update started with a 4 but now I figured it out sorry.
It was big buzz week ago on broken wifi on unlocked AT&T phones. Now I can't find even the thread on that. Did you people find solution?
I have upgraded to 1.57 and it is definitely not a solution.
I tried hard reset with non-working card and wifi on hardware level works perfect. As soon as I've put working SIM in, it stopped and even reversing to non-working sim doesn't help. hard resetting every time is not a solution.
Still waiting for final solution.
I unlocked my Atrix in Australia. I shall walk you though my steps to see if you can pick out anything specific. I was very worried about the WiFi issue so i took many precautions.
I bought the code from Cellunlock.net - using the android50 code to bring it to $20
in the meantime I used an old, inactive SIM in the phone and on boot I would just hit dismiss on the network unlock screen and run the phone on WiFi on my home wireless. (WPA2 key)
When my unlock code arrived (2 days) I went to the wireless settings, DELETED my wireless network from being saved.
TURNED OFF WiFi entirely
Turned phone off properly and replaced the SIM card with my active Vodafone AU SIM
on the network unlock screen, I used the first code out of the two they provided and it was accepted
went back and re-added my wifi network, and doneeee all is working well.. hope this helps someone somewhere.
Thanks a lot DarkRyoushii
Problem is that I received my Atrix already unlocked. I contacted Cellunlock.net if it is possible to unlock it second time, but they responded it is impossible.
What gives me hope, Motorola has to sell originally unlocked phones and their ROM should be free of this AT&T crap. So using that ROM supposedly will help.
I have an AT&T Atrix and the unlock code didn't adversely affect my Wifi. I've actually never had an Android that locked onto Wifi as well as my Atrix. It's tight as hell. Never, ever drops!!
I don't see the correlation between the two but maybe there is some weird quirk. Not denying anyone though. I just wonder what the heck Motorola did to the framework to cause that to happen. Weird.. hope it gets patched up too.
I hope this gets fixed soon. I have an atrix with the sim unlocked. I cant connect to wifi, and I cant get passed the motoblur to set debugging and root the phone. This is very frustrating. I'm in qatar so I dont have a att sim, nor do I have a broken sim either. I guess I have a $600 dollar paperweight.
mine is perfect
wargame1 said:
I hope this gets fixed soon. I have an atrix with the sim unlocked. I cant connect to wifi, and I cant get passed the motoblur to set debugging and root the phone. This is very frustrating. I'm in qatar so I dont have a att sim, nor do I have a broken sim either. I guess I have a $600 dollar paperweight.
Click to expand...
Click to collapse
Don't put any sim in it at all then turn it on. You should be able to connect to wifi that way and get past the setup.
I don't have an atrix yet but I heard that this works. Goodluck.
wargame1 said:
I hope this gets fixed soon. I have an atrix with the sim unlocked. I cant connect to wifi, and I cant get passed the motoblur to set debugging and root the phone. This is very frustrating. I'm in qatar so I dont have a att sim, nor do I have a broken sim either. I guess I have a $600 dollar paperweight.
Click to expand...
Click to collapse
hi friend
i have the same problem, if u find a solution, let me know, thx
zeidof said:
hi friend
i have the same problem, if u find a solution, let me know, thx
Click to expand...
Click to collapse
Did you try my solution it should work. ( it was right above your comment)
Don't put any sim in it at all then turn it on. You should be able to connect to wifi that way and get past the setup.
Your wifi wont be fixed after you put a sim in but it should get you past the motoblur sign up.
zeidof said:
hi friend
i have the same problem, if u find a solution, let me know, thx
Click to expand...
Click to collapse
Guys, if you have 3g (or in fact any) data available on your sim its not a problem. When the motoblur setup tips up, click the settings hard button (the one to the left) choose "configure apn" (or something similar), put in the data you get from your carrier and bam, you should be able to finish the setup.
Wargame1 I bought several sims at eBay and is planning to check with them. As soon as they work, I'll let you know and even send you one from Baghdad.
Wifi problem is not solved yet. When Motorola is going to start selling originally unlocked versions? Their rom should help.
RootManOne said:
Wargame1 I bought several sims at eBay and is planning to check with them. As soon as they work, I'll let you know and even send you one from Baghdad.
Wifi problem is not solved yet. When Motorola is going to start selling originally unlocked versions? Their rom should help.
Click to expand...
Click to collapse
just try it with mobile data man, youll be able to activate motoblur...
and erm, you probably wont be able to install the unlocked rom on the att atrix, sicne you cant change the att/bell roms on the phones either .... maybe just a /system reinstall, like the Gingerblur/Gladiatrix mods
Related
Hi folks, can anyone please help me with this problem?
My brother in law has asked me to look at his S740. He has tried several o2 SIM cards (UK) in this phone but always gets told there is no signal.
Not only that, but there is a symbol where the strength meter should be that isn't documented in the user guide.
He has also tried my o2 (3G) sim and a Vodafone sim, both UK.
Any advice gratefully recieved. We have tried several hard resets also.
Thanks
This means it's looking for signal. My guess: Still SIM-locked?
.-ombre-.
Jerry-S said:
Hi folks, can anyone please help me with this problem?
My brother in law has asked me to look at his S740. He has tried several o2 SIM cards (UK) in this phone but always gets told there is no signal.
Not only that, but there is a symbol where the strength meter should be that isn't documented in the user guide.
He has also tried my o2 (3G) sim and a Vodafone sim, both UK.
Any advice gratefully recieved. We have tried several hard resets also.
Thanks
Click to expand...
Click to collapse
Not sure if it's SIM locked as there is a menu to select which carrier to use.
It reads the SIM correctly and sets it all up for o2, but just doesnt get any signal.
Does anyone know where the GSM antenna is on these? Maybe its a bad connection.
UPDATE:
I've had a mail back from HTC that recommends I send it in for repair, lol.
Now do I take it they are robbing buggers or do I take it that the icon is an indicator of a hardware fault??
Hmmmm, dilemma. lol
Are there any more suggestions on what it may be?
Has anyone successfully taken one of these apart?
it may be because of a hardware error...try to connect to a wifi network...if it impossible to find a wifi network then it is due to a harware problem.Most likely because the FR coaxial cable is out of its possision...download the service manual and see how to fix it.
sasiskas said:
it may be because of a hardware error...try to connect to a wifi network...if it impossible to find a wifi network then it is due to a harware problem.Most likely because the FR coaxial cable is out of its possision...download the service manual and see how to fix it.
Click to expand...
Click to collapse
Hi sasiskas, it conects fine to my wireless network at home. I take it from your response that the cable serves a double purpose.
I downloaded the service manual so I could take a look, but only got as far as removing the 4 screws at the back. lol, I couldn't figure out how to get it off, lol
I'm still stuck at the assumption that it is indeed SIM locked, and so will try to find a suitable card to try out.
Jerry-S said:
Hi sasiskas, it conects fine to my wireless network at home. I take it from your response that the cable serves a double purpose.
I downloaded the service manual so I could take a look, but only got as far as removing the 4 screws at the back. lol, I couldn't figure out how to get it off, lol
I'm still stuck at the assumption that it is indeed SIM locked, and so will try to find a suitable card to try out.
Click to expand...
Click to collapse
Try contacting with your phone's provider (shop,e-bay seller whoever it is) and ask him details about the sim.Good luck.
hey
im getting the same issue on my girlfriends rose
the hardspl is out now and i have tried to flash the rom to see if this helps but nothing as of yet, it could be the radio rom its self as i have a touch pro and when i first got it it was the same till i flashed a cooked rom onto it, its now working fine for me,
if i find out how to fix this i will leave ya a post
stone81 said:
hey
im getting the same issue on my girlfriends rose
the hardspl is out now and i have tried to flash the rom to see if this helps but nothing as of yet, it could be the radio rom its self as i have a touch pro and when i first got it it was the same till i flashed a cooked rom onto it, its now working fine for me,
if i find out how to fix this i will leave ya a post
Click to expand...
Click to collapse
Thanks. I have tried the same but just keep getting a vender ID, (lol spelling), error.
I would appreciate any input whether you have success or not, it just may spark an idea off.
I cant get in touch with any sales or provider as it was gifted to my bro in law. He's not that bothered about it but would like to have it working if he can.
Thanks folks.
Hey! I think I know the solution to your problem...I had exactly the same problem when I hardReseted my phone.
Go to "Start-settings-Phone-Band Select"
and then select
1.Network type : Auto
2.Band Type : "Euro" if you live in Europe, "US" if you live in USA , or "Japan" if you live in Japan.
Good luck...Let us know if it worked!
sasiskas said:
Hey! I think I know the solution to your problem...I had exactly the same problem when I hardReseted my phone.
Go to "Start-settings-Phone-Band Select"
and then select
1.Network type : Auto
2.Band Type : "Euro" if you live in Europe, "US" if you live in USA , or "Japan" if you live in Japan.
Good luck...Let us know if it worked!
Click to expand...
Click to collapse
Yes that is a good suggestion because the phone will display that icon if it can't find a *usable* network, be it that the SIM doesn't allow it or if the bands don't match the selection on the phone or the bands are not usable by the phone hardware etc.
I would suggest downloading & running HTC Field Test (fieldtest.exe) with & without a SIM installed, with each network & band setting & see if it shows any towers or signal. (Normally you want Auto for both but you may not have that option or you might prefer to set to a KNOWN working band to conserve battery & minimize searching) If should show something even without SIM or with SIM lock because it's supposed to support emergency calls either way. If it shows signals with SIM but you still have same no service icon then it's likely SIM locked (although the phone should alert you to that fact) so odds are the phone hardware, rom or settings do not support whatever signals are available to you. (Btw if field test shows N/A for all the values you need to app unlock your phone)
Hope that helps.
Bill
can you share a link with HTC Field Test?Thnx
Search is your friend.
http://forum.xda-developers.com/showthread.php?t=393781
Hey all I'm having a very similar problem.
Had my HTC for some months now but in the past few days I've found that my network signal is becoming very unpredictable.
I'm also on O2 and I used to have a pretty contstant H (I presume HSDPA) connection.
Howeever im finding now the phone with go from H to 3G to GPRS to E to no signal in the course of 5 mines and round and round again!
Its very annoying as it means I cant make / received calls or texts fluently and even cut me off on a phone call too.
However usually on phone calls it will keep me connected ok till I hang up and then go to no signal.
I've checked the wireless and it is picking up networks..
Any other suggestions? I will try the field test tomorrow...
PS I know its not the network as my work blackberry is O2 and is not having this issue..
Cheers in advance!
Well, just to close my input on this thread.
I tried various ROM's available from this site and none worked.
I did try the band selection settings but still a no go.
I did have limited success but overall, nothing. The phone has now gone back to the person who asked me to look into it and to my knowledge he is going to sell it to one of these phone reclaim companies.
I did check and one place, I think through the post office, is offering £80 ish so not bad I suppose.
Anyway, thank you to all who have made suggestions and wotnot. Personally I'm still happy with an old Nokia 6300 and my Wizard (Mini-S)
Thanks folks.
Hi guys,
i used a sim unlock code to unlock the ATT locked Atrix 4g, for use with a european sim card (mobitel, slovenia). it unlocked fine and i could call, but the wifi stopped working it just didnt scan/find or even connect to remembered wifis (home router), which worked perfectly before the unlock. so than i thought it might help to factory reset it, and now the problem persists and i cant even finish the wizard, cuz it wouldnt connect to the cellular (which we have 2g and 3g here) and the wifi has the same problems (so initially it finds all wlans, than after like a few secs it looses them all, i can turn off the wifi and turn it on again and the same thing happens). so i am wodering if anyone has any idea how i could rescue the phone ...
thanks in advance
ok guys i did a hard reset and put in a nonworking sim (doesnt connect to network) and i got the wifi back to working and managed to activate motoblur again. so after that ive put my working sim card in again (3g+ hsdpa+ able), and the wifi stops to work again/behaves the same as i described before. terrible ... anyone has an idea how to fix that ?
ok, more problems, now after ive put the working sim inside and the wifi stopped working, i tried with the nonworking sim (that wifi worked great before with), and the wifi isnt working with the sim it was working before either and even if i try without any sim it doesnt work... ill try with a third sim now and if it wont work ill hard reset it again
Same problem
I have the same exact issue. Anyone know what to do? I can't imagine that this is "bricked" because everything else works fine... thoughts?
where did you guys get the unlock code from?
Actually, I have a similar problem. After entering unlock code the phone accepts my SIM card, but I cannot activate 3G connection. GSM is working, try to call my other phone. APN settings are correct.
In the "hidden" settings menu (*#*#4636#*#*) I cannot chose between radio bands, but only the USA radio band.
Any ideas? Will I need to root it or even put a custom ROM (if it exists)?
So you guys used an unlock code from someone other than the carrier and are now having issues?
Wish I could help on this one. If you used an unlock code from someone other than the carrier, I would contact motorola support.
If you used a piece of software, I would wager that the software broke something and you might as well warranty return it for another.
Sent from my MB860 using XDA App
DarrellRaines said:
So you guys used an unlock code from someone other than the carrier and are now having issues?
Wish I could help on this one. If you used an unlock code from someone other than the carrier, I would contact motorola support.
If you used a piece of software, I would wager that the software broke something and you might as well warranty return it for another.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Don't be offended, but I don't think this is the case. AT&T locked their phone to their network with standard network code (as seen in many other phones for years) so that "alien" SIM card would not work. But, additionally, since the AT&T has some value added services on their data plan (like wifi tethering) they made some accommodations (read: locked parts of the android configuration).
I am not a developer, this is just my guess, but it seams sane and probable.
gogy22 said:
Don't be offended, but I don't think this is the case. AT&T locked their phone to their network with standard network code (as seen in many other phones for years) so that "alien" SIM card would not work. But, additionally, since the AT&T has some value added services on their data plan (like wifi tethering) they made some accommodations (read: locked parts of the android configuration).
I am not a developer, this is just my guess, but it seams sane and probable.
Click to expand...
Click to collapse
No offense taken. This is why I asked about a program. Using an unauthorized code to unlock it may over write a.setting or file. Its also possible that someone broke something using adb.
Best solution, warranty it and try again
Sent from my MB860 using XDA App
ok. anyone with unlocked phone has a wifi problems besides these 2 nice people ?
I don't have a WiFi problem, I have a 3G problem
Sent from my HTC Desire using XDA App
gogy22 said:
I don't have a WiFi problem, I have a 3G problem
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA .....
can you guys tell us what website you use to get your unlock codes from so we can avoid them? thanks
man.. this forum is dead.
even the OP stopped coming here to check his post :/
Based on your replies, I'm guessing you've never unlocked a phone before...
Unlocking a phone to be used for a different carrier affects nothing else but the ability to only use the SIM Card of the carrier you bought the phone from.
To unlock a carrier-locked Motorola phone, you simply need a "Network Unlock PIN" which is an 8 or 16 digit code that you enter to unlock the phone to any network. There is no software installation ivolved in the process.
A 3G issue will occur when your carrier doesn't support the 3G bands that the Atrix supports. Which would be: 850/1900/2100. If your carrier doesn't use any of these bands for their 3G network, then of course you are going to have 3G issues.
The Wi-Fi problem that the OP is having may be as simple as him having an antenna QA issue. But it could never be the Unlock Code.
Unlocking your phone and using another carrier other than AT&T has nothing to do with Wi-Fi issues...
DarrellRaines said:
So you guys used an unlock code from someone other than the carrier and are now having issues?
Wish I could help on this one. If you used an unlock code from someone other than the carrier, I would contact motorola support.
If you used a piece of software, I would wager that the software broke something and you might as well warranty return it for another.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
DarrellRaines said:
No offense taken. This is why I asked about a program. Using an unauthorized code to unlock it may over write a.setting or file. Its also possible that someone broke something using adb.
Best solution, warranty it and try again
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Beach_Head said:
The Wi-Fi problem that the OP is having may be as simple as him having an antenna QA issue. But it could never be the Unlock Code.
Unlocking your phone and using another carrier other than AT&T has nothing to do with Wi-Fi issues...
Click to expand...
Click to collapse
I got my unlock code from cellunlock.net. It unlocked my phone just fine. Don't use that as a reason to avoid cellunlock.net. Unlocking is unlocking.
I have swapped back and forth between my prepaid sim and My AT&T SIM about 5 times so far.
WiFi disconnects almost immediately when I try to connect with my prepaid sim inserted, but I can make calls. (Atrix also displays H+, which can't be right)
With my AT&T sim everything works fine, solid as a rock.
I may do a factory reset to test things, but I have a feeling it has something to do with drivers or the network stack on the atrix, or perhaps because my prepaid sim has no data plan. It certainly isn't a hardware problem with the antenna. I am afraid to do a factory reset on the atrix while I am out of the country, considering that it requires network access to unlock itself.
To the original poster:
When you put a non-connected SIM into the phone, if you do a power reset again, the wifi comes back up solid again.
Also, is there some way we can request a merge of these two threads?
http://forum.xda-developers.com/showthread.php?t=986499
how come only you 2 have this problem ? do you 2 live in the same country ?
this is really surprising :/
It really is quite weird...
ll_l_x_l_ll said:
how come only you 2 have this problem ? do you 2 live in the same country ?
this is really surprising :/
Click to expand...
Click to collapse
I was merely suggesting that it could be a multitude of things, but never the unlocking code or the process of unlocking itself.
Also, it can't be your SIM because your SIM has nothing to do with Wi-Fi. If we were talking about GSM and 3G then SIM cards come into play. Other than that, no way.
Have you tried using the phone without a SIM? Do you get the same problems?
wstutt said:
It certainly isn't a hardware problem with the antenna. I am afraid to do a factory reset on the atrix while I am out of the country, considering that it requires network access to unlock itself.
To the original poster:
When you put a non-connected SIM into the phone, if you do a power reset again, the wifi comes back up solid again.
Also, is there some way we can request a merge of these two threads?
http://forum.xda-developers.com/showthread.php?t=986499
Click to expand...
Click to collapse
Beach_Head said:
I was merely suggesting that it could be a multitude of things, but never the unlocking code or the process of unlocking itself.
Also, it can't be your SIM because your SIM has nothing to do with Wi-Fi. If we were talking about GSM and 3G then SIM cards come into play. Other than that, no way.
Have you tried using the phone without a SIM? Do you get the same problems?
Click to expand...
Click to collapse
I agree that it has nothing to do with the SIM or unlocking.
I just tested. I get the same problem with no SIM inserted. Screw it.. doing a factory reset and seeing what happens.
Edit:
Still does the same thing. But now I have to re-activate app sideloading.
Also, you can reactivate over wifi, which is nice.
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Did.you use software to unlock it or just a code?
Sent from my MB860 using XDA App
just a code
crnkoj said:
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Click to expand...
Click to collapse
I have the exact same problem.
My phone is unlocked and can make calls, but WiFi disconnects me almost immediately. The phone also thinks my prepaid sim has H+ connectivity.
When I go back to my AT&T SIM, I have to do a reboot or 2 to get it cleared up, and then WiFi works again.
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
crnkoj said:
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
Click to expand...
Click to collapse
i also have a friend in saudi arabia who got the unlock code and the wifi is working fine.
only 2 people reported this so far. i guess it could be a hardware problem ? because the other user beside you have this problem even without sim installed " or that what i understood from him "
you can check the other thread too. maybe someone could post something usefull.
hmm i see, where did you find that thread, i was sort of searching for ages and didnt find any issues like that =/
Ye i mean i have this problem without a sim aswell if i dont factory restore the phone, after i do that without a sim card however the WiFi works great...
so i am kind of reluctant to believe it being a hardware issue due to this, sort of software specific issue (at least i think if it would be hardware related, the wifi would start working as soon as i go to airplane mode/take out the sim and a factory reset wouldnt be necessary), or do you think that my theory is rather flawed in thinking that?
and ye the problem is im in europe now and as the reps at motorola support told me, i would have to send the phone to the US for warranty and they would only send it back to an address within the US =/ i will try my luck with the german and uk support site, to see if they could do something for me.
thanks for your time guys tho
hey guys what do you think if i would use this code:
* 2767 * 3855 #
Think before you give this code. This code is used for formatting the original manufacturer. This will delete all files and settings, including internal memory storage. This will also reinstall the phone’s firmware.
To restore it to manufacturer (will it request an unlock code again after that?) cuz i have 2 codes to unlock but the first one worked, so maybe if i woudl try it with the second one than?
I just unlock my atrix with the code from cellunlock, works great and wifi is fine as well. Would like to know where u get the code, and how it turns out if u try reset to default using the combo. Pls update. Ths
Sent from my MB860 using XDA App
I'm having the same issue of not being able to connect to WiFi.
I bought the phone in Las Vegas with an AT&T - pay as you go (no contract).
I bought an unlock code from SwiftUnlocks, and used my Rogers SIM, which appeared to work. I then rooted the phone.
Using the Rogers network, I've been unable to use any sort of data. Phone calls and texts work fine. Then I noticed that my WiFi was not working properly. It would try to obtain an IP address, but couldn't connect. After several reboots, I got the phone to connect to WiFi for a few minutes.
I just did a factory reset, now I'm unable to connect to any network or WiFi to login with MotorBlur, so I can't really use the phone now.
I'm quite frustrated and not sure what else I can do.
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Squig80 said:
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Click to expand...
Click to collapse
i am getting my phone in few hours, then i am going to order from cellunlock a code and wait for 2 days to get the lock. unless someone has a spare code he can pm me i would be thankful.
the code is IMEI specific, cant give oyujust spare codes
secondly, to get wifi to work you have to remove your sim card, put in the att or a nonworking sim card and do factory reset, than wifi will work. and you can load all the stuff via wifi, and than just put in your working sim and use the phone as a phone +3g data (the 3g data works great for me to be honest)
oh i got my code from swiftunlock but i dont think that matters, they all get it from teh same provider im pretty sure.
and if anyone si wondering t he sbf update did NOT fix my wifi problem. i ahve tried several wifi fix programs and neither worked aswell, the fxr wifi did some stuff that the phone now sees the networks but still cant connect.
this is to update everyone that i got the phone. had an issue about the screen doing lots of flickering. contacted amazon and sent it back.
in the whole process so far i lost around 60$ between importing and exporting the phone. all in all. i will stick with my iphone 4 for now. its a good phone.
but i cant take this sadness all over again if i imported another phone with an issue with it as well. i am too OCD for my own good.
so true what you say, tho im coming form a nokia 6220 classic, a bit older than the iphone 4
Hey GUYS...
I have the same problem.... My Bell Atrix WiFi works great with my Rogers SIM (I had someone unlock it for me), but when I put in my Qatar Qtel SIM, it stops working, and goes into that connect/scan/disconnect loop.
Any solutions?
Search in the dev forym there is a solution for it
crnkoj said:
Search in the dev forym there is a solution for it
Click to expand...
Click to collapse
Thanks. Found it: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
help mine stoipped working
[16:53] <arana> hi guys i need help with an unlocked atrix 4g att , that was ulocked with att code, then in order to use recovery i got one of the files here http://forum.xda-developers.com/showthread.php?t=1204500
[16:53] <arana> now it is unlocked but wifi is stuck at obtaining ip address
[16:53] <arana> i tried the solutoin here: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
[16:53] <arana> but still not working
[16:54] <arana> i'll appreciate any help
[16:56] <arana> if possible i would like to put the stock recovery partition if that would fix things, or unlock it with official sbf but i can find it
[16:56] <arana> i used zomgunlock-lite.sbf to unlock
any help?
my carrier is telcel (mexico) and wifi was working fine before i "unlocked" the phone, thank you for any help
I am on Straight Talk with this phone and I have been running the TrevE Mod WiFi tether and PDAnet tether app on all my phones and they work fine...This is my only GSM phone and both tethering apps show that there is a connection but no internet access....and yes I have and internet connection on my phone.
With the TrevE WiFi tether it says on my laptop that it is "connected" with great signal strength but no "internet access".
On PDAnet, I tether using USB and it says its connected but when I open my browser and type something in it tell me "cannot find the server"
If anyone else is using Straight Talk and can tether with this device please let me know how you did it..
My device is Rooted with Elegancia Rom.
If you just want to tether in general, I use wifi_tether_v3_3-beta2 and it works fine with straight talk. But I'm not doing usb tether so can't say how it works for that. At any rate, maybe give it a look and see if it helps.
gokun said:
If you just want to tether in general, I use wifi_tether_v3_3-beta2 and it works fine with straight talk. But I'm not doing usb tether so can't say how it works for that. At any rate, maybe give it a look and see if it helps.
Click to expand...
Click to collapse
I have that app, its configured into my Rom (Elegancia). Can you tell me the settings you have because I connect to my computer and the computer says connected but the small window at the bottom right hand corner on the computer that shows your wifi connections says "connected" but no internet access...I thought it was my computer at first so I tried tethering another phone to the HTC and same thing, no internet access. Please help me if you can.
devo3d said:
I have that app, its configured into my Rom (Elegancia). Can you tell me the settings you have because I connect to my computer and the computer says connected but the small window at the bottom right hand corner on the computer that shows your wifi connections says "connected" but no internet access...I thought it was my computer at first so I tried tethering another phone to the HTC and same thing, no internet access. Please help me if you can.
Click to expand...
Click to collapse
Honestly, I'm just using the default settings so I can't be much help there. sorry.
gokun said:
Honestly, I'm just using the default settings so I can't be much help there. sorry.
Click to expand...
Click to collapse
Would you mind telling me what phone you are using on Straight Talk and if it was originally an At&t phone or a ST phone.
devo3d said:
Would you mind telling me what phone you are using on Straight Talk and if it was originally an At&t phone or a ST phone.
Click to expand...
Click to collapse
HTC One X+ AT&T Branded. Running a deodexed stock rom.
gokun said:
HTC One X+ AT&T Branded. Running a deodexed stock rom.
Click to expand...
Click to collapse
I'm running Elegancia Rom, in your opinion would that have anything to do with it, I don't think so myself. I'd like to run something by you and ask for your feedback on it....I got the unlock code for my phone from At&t and they said when I put the ST sim card in it I would be prompted to put in the code but that never happened, I never had to put in the code, I just put in the card and it worked....I asked ST and they said if I had internet on the phone it was unlocked...Do you think that might have something to do with it or maybe even the new sim cards they have, I wonder if getting to old ST sim card from Ebay might get around the block...
BTW, thanks for entertaining my questions.
devo3d said:
I'm running Elegancia Rom, in your opinion would that have anything to do with it, I don't think so myself. I'd like to run something by you and ask for your feedback on it....I got the unlock code for my phone from At&t and they said when I put the ST sim card in it I would be prompted to put in the code but that never happened, I never had to put in the code, I just put in the card and it worked....I asked ST and they said if I had internet on the phone it was unlocked...Do you think that might have something to do with it or maybe even the new sim cards they have, I wonder if getting to old ST sim card from Ebay might get around the block...
BTW, thanks for entertaining my questions.
Click to expand...
Click to collapse
From what I understand, Elegancia should already have the fix to make the tethering work built in, plus he's been pretty thorough about testing and maintaining the rom so I wouldn't think that's the issue unless it's marked on his known issues list. For the sim question, I've found that the sims from straight talk are somehow branded, so if you put an at&t st sim in an at&t phone it doesn't actually need to be unlocked because the phone thinks it's an at&t sim(at any rate back when I was on T-Mobile that was how it worked for me). So my first guess would be that it's not unlocked and that's why you never saw the code request. I would not think that had anything to do with it unless you were on a stock rom. The stock rom will tell you to dial 611 and upgrade you data or something like that, but again, elegancia is supposed to have already patched that is my understanding. And technically I guess it is working, it just isn't working correctly. That's why you have tethering, but no net access...this may be a silly question, but did you configure the new connection properly on your pc? I know on mine(win7 64bit) it asked me again if it was a home/work/public network and I had to choose home,etc again before it worked(otherwise it gave me the same issue you're getting). You probably already checked that, but thought it might be worth mentioning just in case.
gokun said:
From what I understand, Elegancia should already have the fix to make the tethering work built in, plus he's been pretty thorough about testing and maintaining the rom so I wouldn't think that's the issue unless it's marked on his known issues list. For the sim question, I've found that the sims from straight talk are somehow branded, so if you put an at&t st sim in an at&t phone it doesn't actually need to be unlocked because the phone thinks it's an at&t sim(at any rate back when I was on T-Mobile that was how it worked for me). So my first guess would be that it's not unlocked and that's why you never saw the code request. I would not think that had anything to do with it unless you were on a stock rom. The stock rom will tell you to dial 611 and upgrade you data or something like that, but again, elegancia is supposed to have already patched that is my understanding. And technically I guess it is working, it just isn't working correctly. That's why you have tethering, but no net access...this may be a silly question, but did you configure the new connection properly on your pc? I know on mine(win7 64bit) it asked me again if it was a home/work/public network and I had to choose home,etc again before it worked(otherwise it gave me the same issue you're getting). You probably already checked that, but thought it might be worth mentioning just in case.
Click to expand...
Click to collapse
Thats some great feedback, thanks....I did choose Home when it asked about the network. I will try taking out my ST sim and calling At&t about the unlock again. I have the code but I will see if they can unlock it themselves....Man I hope I get this working, I'd love to be able to tether with 4g...
devo3d said:
Thats some great feedback, thanks....I did choose Home when it asked about the network. I will try taking out my ST sim and calling At&t about the unlock again. I have the code but I will see if they can unlock it themselves....Man I hope I get this working, I'd love to be able to tether with 4g...
Click to expand...
Click to collapse
As far as I know you have to enter that code and they can't do it remotely...but they might know a way to force the unlock code to come up or something. Never hurts to try
gokun said:
As far as I know you have to enter that code and they can't do it remotely...but they might know a way to force the unlock code to come up or something. Never hurts to try
Click to expand...
Click to collapse
Att sent me to ST and ST sent me to Att...lol
When I got the unlock code and put the ST sim card in, it never asked me to put in the unlock code, it just went straight into programing ST.
I don't know if it was the flashed rom, maybe I should have used the stock rom. I will try a device reset to see if it will go back to Att settings and push a stock rom and reinstall the ST sim and see what happens. :crying:
When you got the unlock code from At&t and put the ST sim in, did you get a window to input the unlock code?
Please tell me how you unlocked your device. I never got an unlock window. Plz message me with details if you need to....thanks..
devo3d said:
Att sent me to ST and ST sent me to Att...lol
When I got the unlock code and put the ST sim card in, it never asked me to put in the unlock code, it just went straight into programing ST.
I don't know if it was the flashed rom, maybe I should have used the stock rom. I will try a device reset to see if it will go back to Att settings and push a stock rom and reinstall the ST sim and see what happens. :crying:
When you got the unlock code from At&t and put the ST sim in, did you get a window to input the unlock code?
Please tell me how you unlocked your device. I never got an unlock window. Plz message me with details if you need to....thanks..
Click to expand...
Click to collapse
Well, I went a slightly different route. I buy all my phones myself and have for a long time, so I got mine off ebay long before at&t was even willing to give out the codes on it. So I paid an online place to get my code and send it to me. Once I got it I inserted a TMobile sim into the phone and it asked me for the unlock code, which I then entered. I know on some phones there is a numerical code you can enter in the dialer to bring up the sim unlock option, but I don't recall what it is...
gokun said:
Well, I went a slightly different route. I buy all my phones myself and have for a long time, so I got mine off ebay long before at&t was even willing to give out the codes on it. So I paid an online place to get my code and send it to me. Once I got it I inserted a TMobile sim into the phone and it asked me for the unlock code, which I then entered. I know on some phones there is a numerical code you can enter in the dialer to bring up the sim unlock option, but I don't recall what it is...
Click to expand...
Click to collapse
I was thinking about getting one of those "original" ST sim cards but decided to go with the ones they offer on their site. I read that if the sim doesn't have the unlock code script built in it won't ask for one and since its "At&t compatable I bet thats what they did). I guess I'll try and get one of the original ones....great, more money...LOL. Thanks for the info.
devo3d said:
I was thinking about getting one of those "original" ST sim cards but decided to go with the ones they offer on their site. I read that if the sim doesn't have the unlock code script built in it won't ask for one and since its "At&t compatable I bet thats what they did). I guess I'll try and get one of the original ones....great, more money...LOL. Thanks for the info.
Click to expand...
Click to collapse
UPDATE: I used a Verizon sim for a sec and got the unlock notice to unlock my phone. I got it unlocked and thought that would fix my tethering problems but it didn't. I just don't know what else to do...HELP
My guess is you have the LTE tfdata SIM and that is why tethering does not work. Tethering connects but you get the "no internet access".
gokun , your tethering works but what SIM card do u have and what's ur apn setting? Tfdata or att.mvno?
I posted a reply to this thread and it appears to be gone. Did I do something wrong?
If it helps, I have Straight Talk and am using a jailbroken iPhone, running MyWi 5.5. Tethering worked fine up until a couple months ago, at which point I could connect to the Phone just fine via WiFi, but not access internet.
Found out that MyWi uses Google's DNS server (8.8.8.8), and apparently Straight Talk is blocking the connection. If you I access websites using IP address, then it works fine.
Might be something to experiment with and see if the software can provide a work-around.
I also have the same problem. Running an unlocked and rooted galaxy s2 and treve mod. Worked great with tmobile, switched over to straight talk and it immediately stopped working.
johnnylingo said:
If it helps, I have Straight Talk and am using a jailbroken iPhone, running MyWi 5.5. Tethering worked fine up until a couple months ago, at which point I could connect to the Phone just fine via WiFi, but not access internet.
Found out that MyWi uses Google's DNS server (8.8.8.8), and apparently Straight Talk is blocking the connection. If you I access websites using IP address, then it works fine.
Might be something to experiment with and see if the software can provide a work-around.
Click to expand...
Click to collapse
johnnylingo, that was my problem. Thanks for posting the solution. Straight Talk is blocking DNS server 8.8.8.8.
Changing the DNS server from 8.8.8.8 to "only" 8.8.4.4 worked for me.
To be clear, I have absolutely no idea what I'm doing, and no experience whatsoever with any of this.
Over 12 hours of research I managed to unlock the bootloader, root, and flash my TextNow Moto E with a stock US Cellular ROM. Everything worked fine.
What are the next steps to take, if any? Is it possible to even use a GSM network on this phone? I have an active T-Mobile sim card that the phone simply will not accept. I get a "no sim found" notification.
I attempted this with no success.
To start, su command would not work.
This worked for me on the XT1529, but it might work on the XT1526 as well since they're both LTE/CDMA devices:
root, open /system/build.prop, add the following line to the end: ro.telephony.default_network=10
save, make sure the permissions are still 0644, reboot.
When you check *#*#4636#*#* it should be in LTE/GSM/CDMA mode, and in Settings > Mobile Network it should say "Global".
xtermmin said:
This worked for me on the XT1529, but it might work on the XT1526 as well since they're both LTE/CDMA devices:
root, open /system/build.prop, add the following line to the end: ro.telephony.default_network=10
save, make sure the permissions are still 0644, reboot.
When you check *#*#4636#*#* it should be in LTE/GSM/CDMA mode, and in Settings > Mobile Network it should say "Global".
Click to expand...
Click to collapse
This didn't work. I ended up experimenting more and softbricked my phone, got stuck in a boot loop. Through curiosity I ended up flashing the phone with a stock xt1527 rom. SIM now recognized as a non supported sim, so that's nice. Still doesn't work.
I cannot post links to screens as a new user, but if you happen to want to see them, message me and I'll link them from my dropbox.
I ended up ordering an unlocked xt1527 last night. However, I would still like to figure this out. Would I perhaps have to flash the modem?
akaholik said:
This didn't work. I ended up experimenting more and softbricked my phone, got stuck in a boot loop. Through curiosity I ended up flashing the phone with a stock xt1527 rom. SIM now recognized as a non supported sim, so that's nice. Still doesn't work.
I cannot post links to screens as a new user, but if you happen to want to see them, message me and I'll link them from my dropbox.
I ended up ordering an unlocked xt1527 last night. However, I would still like to figure this out. Would I perhaps have to flash the modem?
Click to expand...
Click to collapse
You could try the procedure posted in this thread if you haven't already, assuming your still on the xt1527 rom:
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
hydroman202 said:
You could try the procedure posted in this thread if you haven't already, assuming your still on the xt1527 rom:
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
Click to expand...
Click to collapse
Just tested this - not working. This is a really maddening scenario
I contacted sprint and gave them the IMEI - they tell me that this phone can indeed be unlocked (xt1526), but I would have to do it through TextNow. I've searched for ways to bring up the SIM unlock prompt, but it simply doesn't show up with any of the methods found. :s
akaholik said:
I contacted sprint and gave them the IMEI - they tell me that this phone can indeed be unlocked (xt1526), but I would have to do it through TextNow. I've searched for ways to bring up the SIM unlock prompt, but it simply doesn't show up with any of the methods found. :s
Click to expand...
Click to collapse
I am also having problems finding this menu. I wish there was an easy way to access it, but unfortunately, sprint has made it rather difficult.
hydroman202 said:
I am also having problems finding this menu. I wish there was an easy way to access it, but unfortunately, sprint has made it rather difficult.
Click to expand...
Click to collapse
I still have my sprint model as well, and have the MSL code. But I have also never found a way to enter it for unlock. I've tried using active ATT and VZW SIMs, and also tried flashing the USC modem on it - still works on sprint / ringplus, but also still won't acknowledge ATT or VZW SIMs.
Sent from my XT1526 using Tapatalk
dandrumheller said:
I still have my sprint model as well, and have the MSL code. But I have also never found a way to enter it for unlock. I've tried using active ATT and VZW SIMs, and also tried flashing the USC modem on it - still works on sprint / ringplus, but also still won't acknowledge ATT or VZW SIMs.
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
I don't know for sure, but i did read in another place on here somewhere about an "embedded card" that sprint put in another phone. I wonder if that is the case with this one? If not, all i can really think of is that there is something in place that motorola made specifically for the sprint model. We know its not modem related, so it must be somewhere else, in the NAM, or something like that. One thing i did accomplish was to get another bar, (it had no signal and looked like an outline, but it was there), show up by editing the build prop with a specific line and then rebooting. Odd thing is, its the same thing that showed up when i attemped to flash another stock firmware. The firmware i flashed was for the xt1526, retail us. Which leads me to think it might be a band issue, as someone else mentioned in another thread on here somewhere. I mean, it would make sense with the no signal and everything. Sorry for the long post, just thinking out loud i guess.
hydroman202 said:
I don't know for sure, but i did read in another place on here somewhere about an "embedded card" that sprint put in another phone. I wonder if that is the case with this one? If not, all i can really think of is that there is something in place that motorola made specifically for the sprint model. We know its not modem related, so it must be somewhere else, in the NAM, or something like that. One thing i did accomplish was to get another bar, (it had no signal and looked like an outline, but it was there), show up by editing the build prop with a specific line and then rebooting. Odd thing is, its the same thing that showed up when i attemped to flash another stock firmware. The firmware i flashed was for the xt1526, retail us. Which leads me to think it might be a band issue, as someone else mentioned in another thread on here somewhere. I mean, it would make sense with the no signal and everything. Sorry for the long post, just thinking out loud i guess.
Click to expand...
Click to collapse
Yes, I'm hoping there is a fix somehow. I'm ok to use the phone on WiFi, but it is otherwise useless to me. I'd like to have a backup phone in case my first Moto E dies, they are really rugged. I have experimented all day without success. Experimenting with build.prop does nothing. I export the build.prop text and post it just for reference, if anyone cares to play with it.
hydroman202 said:
I don't know for sure, but i did read in another place on here somewhere about an "embedded card" that sprint put in another phone. I wonder if that is the case with this one? If not, all i can really think of is that there is something in place that motorola made specifically for the sprint model. We know its not modem related, so it must be somewhere else, in the NAM, or something like that. One thing i did accomplish was to get another bar, (it had no signal and looked like an outline, but it was there), show up by editing the build prop with a specific line and then rebooting. Odd thing is, its the same thing that showed up when i attemped to flash another stock firmware. The firmware i flashed was for the xt1526, retail us. Which leads me to think it might be a band issue, as someone else mentioned in another thread on here somewhere. I mean, it would make sense with the no signal and everything. Sorry for the long post, just thinking out loud i guess.
Click to expand...
Click to collapse
its not an embedded card in the textnow wireless version as ive taken the sim card out of mine. The S3 was an imbedded card, but not this device. Im also searching for a method to sim unlock this little bugger. Ill let you know what i find out
youdoofus said:
its not an embedded card in the textnow wireless version as ive taken the sim card out of mine. The S3 was an imbedded card, but not this device. Im also searching for a method to sim unlock this little bugger. Ill let you know what i find out
Click to expand...
Click to collapse
I talked to Sprint - they told me TextNow has to SIM unlock the device. I talked to TextNow - They told me the device IS SIM unlocked. So, there's that if anybody is wondering. I've almost abandoned this experiment, but it's still in the back of my mind. In other news - the new Moto E 2015 I received has a yellowed display. 2/3 brand new Motorola devices I received had display issues. Excellent phones, poor quality control it seems.
akaholik said:
I talked to Sprint - they told me TextNow has to SIM unlock the device. I talked to TextNow - They told me the device IS SIM unlocked. So, there's that if anybody is wondering. I've almost abandoned this experiment, but it's still in the back of my mind. In other news - the new Moto E 2015 I received has a yellowed display. 2/3 brand new Motorola devices I received had display issues. Excellent phones, poor quality control it seems.
Click to expand...
Click to collapse
i got my E2015 from textnow for $10 as a refurb and its solid as a rock so far. I stumbled upon this thread and it looks promising, but im at work and we use citrix clients and not actual computers so i cant run it here, but ill give it a whirl when i get home. I do also believe that its GSM unlocked
Trying to make my XT1526 (Boost stock ROM) work with GSM, and got stuck on something weird. Inserted a SIM card from China Mobile, changed the network mode to "Global" and turned on roaming, after a while it got successfully registered on T-Mobile network, both voice and data. Yet, when I inserted a T-Mobile SIM card, the phone gave an "Invalid SIM card" error, and simply refused to connect. Thought it might be an issue with APN setting, but I couldn't manually add the T-Mo APN to the phone (in fact it wouldn't take any APN).
I think the phone's hardware is capable of LTE/CDMA/GSM. It's a just matter of figuring out the right configuration.
ck9068 said:
Trying to make my XT1526 (Boost stock ROM) work with GSM, and got stuck on something weird. Inserted a SIM card from China Mobile, changed the network mode to "Global" and turned on roaming, after a while it got successfully registered on T-Mobile network, both voice and data. Yet, when I inserted a T-Mobile SIM card, the phone gave an "Invalid SIM card" error, and simply refused to connect. Thought it might be an issue with APN setting, but I couldn't manually add the T-Mo APN to the phone (in fact it wouldn't take any APN).
I think the phone's hardware is capable of LTE/CDMA/GSM. It's a just matter of figuring out the right configuration.
Click to expand...
Click to collapse
thats a DSU issue. Domestic sim unlock can be tricky
youdoofus said:
thats a DSU issue. Domestic sim unlock can be tricky
Click to expand...
Click to collapse
Why so tricky? Why? I am truly of no help, I just started the thread. Learning as I go...funny thing. Upon flashing again with the xt1527, and flashing the modem with a different modem software, the phone still shows to be a sprint modem software.
I wonder if the "fastboot oem config carrier" option would do any good?
DSU is tricky because it involved modifying the NV values thats buried in the radio software and it has a similar access issue to SU. I have (among many others) a Sprint S5 (G900P) and achieving DSU on it was the work of some SERIOUS developers. The config carrier might be of some help, but i havent delved into it yet, and im not sure if id fully understand what it means anyways. Additionally, Moto devices are tricky period. I had 2 Razrs (one xt 912 and one xt910), one of them was GSM unlockable and the other wasnt. Motorola mobile phone division has also changed hands recently, so its direction has also changed. Basically, whats needed here is either a ton of forum scouring or a developer to actually pay attention to this device, or a bit of both