I've been running each version of SuperClean (currently 2.7) since it was released by adrynalyne. In my limited understanding, I believe that changing a rom does not change the radio being used. My radio (baseband version) is currently listed as being DL09 (see attached). Is there a way of updating the radio and is there an advantage of doing so? If so, does anyone know where I can find the best/latest radio for the Fascinate that will work with SC? I think I read somewhere that one's choice of radio can affect GPS performance. My GPS is currently working really well. Does the radio affect battery life (currently not very good) or other things also?
You need eb16 or eb01 radio to use froyo, sc2.7. Sc2.7 is removed and 2.8 is out now. There is a all in one odin pack on andriodcentral that gives you root, cwr, and sc in one pack. 15 minutes and done.
Sent from my SCH-I500 using XDA Premium App
Bob-o said:
You need eb16 or eb01 radio to use froyo, sc2.7. Sc2.7 is removed and 2.8 is out now. There is a all in one odin pack on andriodcentral that gives you root, cwr, and sc in one pack. 15 minutes and done.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Bob-o, not quite sure I understand this comment, since I'm running Froyo (SuperClean 2.7) just fine with my older DL09 radio. I guess I'd like to know if there's an advantage to updating the radio, or should I leave it as-is and just keep updating the rom?
Bob-o said:
You need eb16 or eb01 radio to use froyo, sc2.7. Sc2.7 is removed and 2.8 is out now. There is a all in one odin pack on andriodcentral that gives you root, cwr, and sc in one pack. 15 minutes and done.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
The EB16 modem will not work with the VZW Fascinate. If you want to update the baseband, update to the EB01 baseband. You may get slightly better battery life, and reception will also probably change slightly, though probably not enough to really notice. To update, you need to find a tar with the modem.bin for EB01 (or whatever baseband you want) and flash it via Odin. See here for instructions on flashing.
I've heard from some users that the DL09 radio works better sometimes than the EB01 radio. Some have reported better battery life. I'm running the debloated deodexed stock EB01 with the DL09 radio and it works fine, although I'm not certain yet if there's any improvement or not.
Sent from my SCH-I500 using XDA App
harpdoc said:
Bob-o, not quite sure I understand this comment, since I'm running Froyo (SuperClean 2.7) just fine with my older DL09 radio. I guess I'd like to know if there's an advantage to updating the radio, or should I leave it as-is and just keep updating the rom?
Click to expand...
Click to collapse
Both DL09 and EB01 work fine with all versions of SC. There's really no reason not to flash, unless you're uncomfortable doing so (I assume this isn't the case, as you're running SC ). You might get slightly better signal or maybe better battery life. You also might get worse. You won't know until you try it.
If it doesn't work as good as DL09, no harm done, just flash it back.
Related
Here it is folks, in its bloated, ugly, and nasty touchwiz self. Kernel is included in the package. Rooted and busybox, only.
How to install, coming from Eclair:
1. Boot phone to download mode, and flash modem via Odin. Use pda button.
http://www.mediafire.com/?1r7uk6gf8d6s76z
2. Boot to clockwork recovery, and wipe data/factory reset. Then install rom.
http://www.mediafire.com/?dj5567v7gsiwan7
3. Before rebooting, also install the new clockwork package.
http://forum.xda-developers.com/showthread.php?t=942021
4. Boot up and enjoy...or hate. Your mileage may vary!
Thanks:
All the folks who helped check for watermarks...y'all know who ye are.
The leaker, who we ended up serving for dinner with a nice bisque. We named it Leaker Bisque. Patent pending.
Everyone should feel obligated to join IRC and give each and every dev a hug and a kiss for Valentine's day.
hey this is cool thanks
WIN!!!!!!!!!!!!!!!!!!!!
Guys, seriously thank this dude for posting it. We've had it and it is LEGIT. It works wonderfully and don't forget to grab Superclean for this as well. Voodoo is out too.
Here, have a few mirrors Adryn.
MODEM (Flash in Odin before EB01):
http://dl.dropbox.com/u/18199645/REAL FROYO EB01/eb01a_modem.tar
EB01:
http://dl.dropbox.com/u/18199645/REAL FROYO EB01/eb01a_modem.tar
Here's a link to everything currently out that you can do to get EB01 to do what you want.
ALL THINGS COOL EB01
Hope others are wondering this question too...
What's the diff between EB01 and DL30?
GoBruins said:
Hope others are wondering this question too...
What's the diff between EB01 and DL30?
Click to expand...
Click to collapse
From what I've read it's just an updated/less buggy build of Froyo
Syn Ack said:
WIN!!!!!!!!!!!!!!!!!!!!
Guys, seriously thank this dude for posting it. We've had it and it is LEGIT. It works wonderfully and don't forget to grab Superclean for this as well. Voodoo is out too.
Here, have a few mirrors Adryn.
MODEM (Flash in Odin before EB01):
http://dl.dropbox.com/u/18199645/REAL FROYO EB01/eb01a_modem.tar
EB01:
http://dl.dropbox.com/u/18199645/REAL FROYO EB01/eb01a_modem.tar
Click to expand...
Click to collapse
Voodoo is out? Link please?
Working absolutely great so far. Thanks!
You, sir, are my hero.
Working GREAT this Rom is running Great
Sent from my SCH-I500 using XDA App
Is EB01 the froyo version coming out later this month? Or is this another build before the final version?
Awesome, can't wait to try this tomorrow!
Shakes The AssClown said:
Is EB01 the froyo version coming out later this month? Or is this another build before the final version?
Click to expand...
Click to collapse
I believe it's the final.
Shakes The AssClown said:
Is EB01 the froyo version coming out later this month? Or is this another build before the final version?
Click to expand...
Click to collapse
It's supposedly official.
Im running it now - if you go to software update it says its disabled on engineering builds. That would lead me to think it will be recompiled again, even if for no good reason.
Does anyone know if DL30 Themes work on the new build?
So if I'm on DL30 the leak all I need to do is flash the EB01modem.tar and flash EB01 in recovery to run this?
Grimis said:
So if I'm on DL30 the leak all I need to do is flash the EB01modem.tar and flash EB01 in recovery to run this?
Click to expand...
Click to collapse
I would think so Grimis...and I would do a full wipe just to play it safe...wipe the dalvik cache, etc.
Shakes The AssClown said:
I would think so Grimis...and I would do a full wipe just to play it safe...wipe the dalvik cache, etc.
Click to expand...
Click to collapse
Thanks
Sent from my SCH-I500 using XDA App
How might i flash the EB01 radio with Heimdall? I have tried. I am currently running the DJ05 radio with DL30 superclean 1.0
It was my understanding that a froyo update to the SGS line brings the necessary bootloader modification that is needed for our phone and heimdall to work together. DL30 is froyo... ostensibly that means we have the modified bootloader.
When i try to flash the EB01 radio with heimdall, i hit start, and it says it cannot find a compatible device. Can anyone shed any light on this?
If I'm on dl30 can I just flash the modem? I love my current setup
Sent from my SCH-I500 using XDA App
hey guys i was just wondering what are the steps i would need to take to switch from one radio modem to another radio modem and is eb01 the latest version??
mrtonee said:
hey guys i was just wondering what are the steps i would need to take to switch from one radio modem to another radio modem and is eb01 the latest version??
Click to expand...
Click to collapse
You would need Odin to flash the modem(radio/baseband). EB01 is latest.
Some people find better battery life with dl09
Sent from my SCH-I500 using XDA Premium App
People have been reporting problems with the EB01 radio having issues not ringing and missing calls without showing they were missed. DL09 and EA28 seem to have better results. You can Odin just the DL09 radio but if you want the EA28 radio you have to Odin back to stock then OTA to EA28.
Sent from my Fascinate
Superclean 2.9.1
EC10 voodoo kernel
EA28 radio
thank to all..............
Hey folks
Well I have had my share of messups with my vzn fsc.
Things are settled now as I have been Ble to figure out the stuff.
So after trying superclen, evilfascination, and community rom I have come to the conclusion that personally (and no offence to no one) I like the stock roms more but without the samsung and verizon bloatware.
Could you great guyz suggest me the best debloated and all stock rom which is smooth to operate, has great battery life and doesnt hVe any known issues.
I would b highly thankful for the help, pl link me to the threads guyz.
Regards
UPDATE : guyz the kind suggestion given my dnoyeb here in the second post is really awesome and i suggest all should try this.
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Click to expand...
Click to collapse
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
bmeek said:
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
lord dredd said:
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
Click to expand...
Click to collapse
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
dnoyeb said:
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
actually updating is gonna be an issue ;P
i am using the handset in India and have added Indian operator's settings in it so update via SETTINGS>ABOUT PHONE >SYSTEM UPDATES aint possible
so practically no way to flash the ed03 i guess
ED01 is not gonna be any issue as i can go back to dl09 eclair of adreyn anytime and then update to ed01 stock through his EA28 and ED01 updates.
after that ed03 ?????? i donno from where and how
if you have any other way of accomplishing all ur stuff then pl help
regards
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Do you have the link to Sbrissen's TSM mod package? And, what is the shortlight package? Thanx!
Do you have the link for Sbrissen's TSM mod? And, what is the shortlight package? Thanx.
Sent from my SCH-I500
Click to expand...
Click to collapse
dnoyeb said:
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
then install aluncher pro on miui
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
lord dredd said:
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
Click to expand...
Click to collapse
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
landshark68 said:
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
Click to expand...
Click to collapse
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
lord dredd said:
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
Click to expand...
Click to collapse
If you followed the steps by dnoyeb, then you are correctly set up on a debloated/deodexed ED01 ROM. Your baseband is the modem/radio and would not have changed after you followed Adrynalyne's post to get to ED01 quickly. You flashed imnuts' ED03 ODIN package which would have given you the stock ED03 ROM and kernel, but not the ED03 modem so you were still at ED01 modem which is fine. Then you followed dneyob's steps to flash the ED01 Debloated/Deodexed ROM which would have changed you to the ED01 build from ED03 build. For all intents and purposes ED01 and ED03 are the same thing. ED03 simply added in a fix for those people who could not receive the ED01 OTA update. The verizon and android both flashing at the same time is just an overlapping boot animation that happened because as I recall you could not do a complete data wipe/factory reset for fear of losing the verizon network while you are in India. So other than that little quirk of the overlapping boot animations, you should be exactly where you wanted to end up - a debloated ED01 ROM and with imnuts' -100mv kernel you should see better battery life if your phone can handle the undervolting.
Congrats!
i guess i did exactly as you have outlined,
i am now gonna caliberate the battery and will revert tomorrow about the backup and stuff
love ya
regards
when i first was learning how to root and flash, the thread for the evilfascination rom taught me everything i know. it does a great job in describing the steps to root and then flash the rom. i personally stuck with the evil fascination because its been so stable from the getgo and i love the overall theme of it. I kept getting peculiar bugs with comrom that i did not know enough yet to try and fix.
I suggest you go to the fascinate android development forum, and read the evil fascination thread.
I updated my post on the first page with links incase anyone else was looking at a quick rundown with links on how to get to a fully rooted / debinged / debloated type setup quickly.
Thanks a bunch matey.
God bless.
sent from my vzn fsc 1474 quadrant score
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Snakehn said:
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Click to expand...
Click to collapse
so you mean u didnt go for debloated ed01 from adryn and not even the kernal ?
if yes then someday i might also wanna try this out, coz as and when i use 3G my battery drains like hell with the debloated setup as well.
would appreciate some more suggestions.
regards
with EA28 and ED04 + PBJ sv 531 kernal i get pretty much good backup and good 3g speeds too.
missed call was the issue which i am trying to solve with softlocker, seems to work
I've only been able to find the ED04 modem update. I have not been able to receive OTAs since I reverted from the GB leak. I ODINed DL09 and used EA28 & ED01 update.zips and am now on ED01. Every time I've tried OTA, I get "Server Unavailable".
Odin back to DLO9 and allow the ota from there. Something about changing up the build (such as different baseband than build) messes with the ability of the phone to properly connect to ota. The update zips may change something that is essential to ota. I am not certain but I have used this method consistently due to problems with others. I could be mis-interpreting your problem but I think you will find that ota will work with DLO9 as the starting point.
Sent from my SCH-I500 running CM7 and using XDA Premium App
Thanks for helping but If I'm not mistaken, I tried to OTA from DL09 & DI01 but failed, which is why I used the update.zips from here to get to ED01. I never had a problem before I tried the GB leak.
You say you reverted from gb..was that an mtd gb leak? If so did you use the atlas2.2 pit file in the re partition box and revert with the official vzw tar( the dl09 or eb01) when you used odin? If you did not, I'm sure that will cause issues.
I'm not sure it will help your specific issue you have, but I know you always have to use those to revert back from an mtd setup.
Sent from my SCH-I500 using XDA App
I reverted from the GB leak from p3droid, after ruining a SD card.
I tried again returning to DI01 & DL09 with Odin. I used the atlas2.2 pit file as recommended. OTA still says Server Unavailable. I've tried it from different locations to make sure it wasn't a signal issue.
Any suggestions? Would love to be able to receive OTAs again and be fully updated. Stuck on ED01 through manual zip updates.
Check this thread!
http://forum.xda-developers.com/showthread.php?t=1097355
Odin to DL09
In the thread download the DL09 to ED04
then use CWM to go right from DL09 to ED04 in one shot!
Super easy without the silly OTAs
That's just the modem though, right?
johnnyplaid said:
That's just the modem though, right?
Click to expand...
Click to collapse
Yup it sure is
I would try using odin to push the vzw official eb01 tar with the atlas 2.2pit and repartition checked
Let it boot fully and then try ota...I know if your modem doesn't match your rom it may cause ota update errors
Sent from my SCH-I500 using XDA App
I really appreciate the help guys. Going to figure this out sooner or later.
I've tried going back to DI01 & DL09. Those were the official versions and what I've always done & I tried the atlas 2.2pit file as suggested earlier. I've also tried installing EB01, which I think was a Froyo leak.
Before, if I tried an OTA and wasn't on an official version, it would say No Update Available. Now, it doesn't matter if I'm on DI01, DL09, EB01 or ED01, it says Server Unavailable. I never had the problem before until I tried the GB leak.
Thanks again for the help and would appreciate any further ideas.
The first time I flashed a rom I knew I was never going back to stock...might I ask why do you want stock? warranty issues? I know its all a matter of personal preference and I don't know how much of a difference there is between ed01 and ed04 but I know landshark made an ed01.tar that is stock and will get you close to what is currently stock..might even wanna try and odin that and see if you can ota from there?..just thinking out loud really.
Sent from my SCH-I500 using XDA App
I'm having the same issue and I'm hoping it's a good enough excuse to get a new phone from verizon.
Sleek69 said:
I'm having the same issue and I'm hoping it's a good enough excuse to get a new phone from verizon.
Click to expand...
Click to collapse
here is how to get back to stock and update without huge OTA's
Thanks for the assistance. I've updated to ED01 with the update.zips on here. Would like to get to ED04. ED04 supposedly had some tweeks for OTA improvement (ironic) and less missed calls. Any ideas to get OTA working again would be appreciated.
Sent from my SCH-I500 using XDA App
johnnyplaid said:
Thanks for the assistance. I've updated to ED01 with the update.zips on here. Would like to get to ED04. ED04 supposedly had some tweeks for OTA improvement (ironic) and less missed calls. Any ideas to get OTA working again would be appreciated.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Once you ODIN back to DL09, there is a post about how to get to ED04 without the huge over the air updates. It basically involves ODIN'ing DL09, then using CWM to flash a zip that will take you straight to ED04. I used it after I was already on CM7, and it works if you are on other roms as well.
Getting to ED01 (rom) quickly:
http://forum.xda-developers.com/showthread.php?t=1044474
Getting to ED04 (modem) quickly:
http://forum.xda-developers.com/showthread.php?t=1097355
The modem one...was the most useful thing EVER.
out of curiosity, i have cm7 on DI01 and i am not getting messages and the messages i send are blank. would any of these methods fix the problem? im thinking it could be the radio. I had the OTA Ed04 but for some reason had to go back to DI01 to flash the rom.
xdapadogx said:
out of curiosity, i have cm7 on DI01 and i am not getting messages and the messages i send are blank. would any of these methods fix the problem? im thinking it could be the radio. I had the OTA Ed04 but for some reason had to go back to DI01 to flash the rom.
Click to expand...
Click to collapse
I although radios are rom/kernel independent, I don't know if the radio is completely the problem but I wouldn't use that old if a radio with that new of a rom...
I have had excellent results with the ec09 radio...radio reception and quality seems to vary from phone to phone so try a few but thats just my 2 cents
Sent from my SCH-I500 using XDA App
Thanks much. I hear ec09 and ed04 are good ones. I searched under the cm7 forum but is there an exact forum that has those to download including instructions
Sent from my SCH-I500 using XDA App
Well i see the link above, and its ok to do straight from my DI01?
Sent from my SCH-I500 using XDA App
xdapadogx said:
Thanks much. I hear ec09 and ed04 are good ones. I searched under the cm7 forum but is there an exact forum that has those to download including instructions
I would try both and since the ec09 needs to be unzipped and then flashed (its not hard but its a lil extra work..either way id leave it for last unless your comfortable unzipping files) the install instructions are right in the same post with the link to download..its in the dev section
I would try ed01 or ed01 first because those are available in an odin version..enter download mode..flash in odin...done..if you don't like either of those, ec09 works great for me
They can all be found in the development section. In the stickies there is a post nitsuj wrote with a list of all roms/kernels/recoveries and radios find then all there
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
After updating to the latest MIUI, I am having issues with data and wifi. No matter what I do I can't get them to work. I'm currently running MIUI 1.11.4 with whatever kernel it comes with and ED05 radio. Should I try to odin a new radio or flash a new kernel? Thanks.
I would odin ec09 radio
"better to be safe than to be odining" -me
Go back tot EC09 then. EC09 and ED05 are pretty much what everyone uses. My phone usually prefers EC09 on most Roms. I am currently using ED05 on Miui 10.28.1
I guess most people with the GB roms report better connectivity and speeds on EC09 radio vs ED05. Personally I use EC for all my roms. I've got nandroid backups of just about every GB rom and even a stock ED05 rom and even the stock I use EC radio.
"better to be safe than to be odining" -me
Ec09 gives far better data speeds imo. avg. 1.3mb/s down on ec. only get .75mb/s on ed05. although different areas will experience different results from what I have read.
Ec09 works great in my area nice speed and very little issues
Sent from my ADR6400L using xda premium
Cool. Thanks for the responses. I have one other problem though. I can't figure out how to "extract" the EC09 file using 7zip. That's what it says I have to do in this thread:
http://forum.xda-developers.com/showthread.php?t=1132236
Would anyone mind walking me through this process? (Or posting a download link for EC09 radio if it's not too much work?)
Thanks
http://forum.xda-developers.com/showthread.php?t=1132236
Thanks but I know that's the article where I can find the file that I need to extract EC09 radio from. I downloaded the 7zip program and the file that contains EC09 but I can't figure out how to extract EC09 so that I can odin it.
shahud said:
Thanks but I know that's the article where I can find the file that I need to extract EC09 radio from. I downloaded the 7zip program and the file that contains EC09 but I can't figure out how to extract EC09 so that I can odin it.
Click to expand...
Click to collapse
uhh that link is just the modem not the rom