[Q] 180-degree Screen Rotation - Atrix 4G Q&A, Help & Troubleshooting

Coming from WM6, I find it odd that there's no manual screen rotation options in Android. Odder still, that there's no 180-degree rotation mode.
I have a universal Car Mount from my old phone that I like, mostly because it attaches to the air vents. I find this positioning is better than a conventional windshield mount on my car, and avoids the typical issues with suction cups continuously falling off (or melting into place).
The problem is that the dock blocks the USB charging ports on the corner of the Atrix. I can get around this issue by putting the phone in upside down, however to do so I need to 'flip' the display.
The Motorola Auto-Rotate feature does not support the 180-degree position out of the box. I've found several posts asking about this feature, but no answers except a vague reference to Cyanogen Mod, implying that this will take more than a standard app/widget can do.
So, is it possible to do this on the Atrix now that we have root and deodexing options available? This is my first Android phone, so I'm not yet familiar with its innards.
Alternatively, is it possible to flip the display on a given application, specifically Nav or one of the offline GPS programs?
Ideally, what I'd like to see is:
A Widget or shortcut to manually set and/or toggle screen rotation like what was standard on WM6. Outside of the car dock, this is also useful when using the phone on a desk or bed at odd angles.
Script/Shortcut/Icon that sets a specific rotation and then launches the car dock (or GPS app).

Use Launcher Pro.
Gives you full 360 screen rotation.
Sent from my MB860 using XDA App

No, unless I'm missing something, it does not.
LauncherPro does allow the home screen to be rotated (which is not what I care about right now), but it does not support rotating it 180-degrees (upside down).

Ahh you're right.
The dock will flip to 180, but the screen stops at 90.

Any ideas?
I don't mind playing with Androids internals (time permitting) if this is possible , but as I said my experience with Android so far is minimal (particularly compared to the xda experts).
According to http://developer.motorola.com/docst...at_runtime__Allow_the_user_to_set_preferences, the only options for application preferences are landscape or portrait. Not sure if this is applicable though.
I've found an old related thread for the G1 here http://forum.xda-developers.com/showthread.php?t=449688&page=2 added screen rotation to that device. It does note though that not all rotations are implemented, and is probably also talking in the context of 2.1.
Another related thread at http://stackoverflow.com/questions/...e-rotations-by-90-but-enable-rotations-by-180 seems to imply that the 180-degree rotation won't work until we get the Android 2.3 update.
The android docs includes a ROTATION_180 definition for the Surface object with a setOrientation method on http://developer.android.com/reference/android/view/Surface.html
It appears that CyanogenMod 7 adds this capability: http://nightly.posterous.com/rotate-180
Clearly we're not going to see CM on the Atrix for a while, but is there anyway we can backport this feature into the Atrix, or will this have to wait for the fabled 2.3 update?

Related

[Q] Sleep Mode Clock

I saw a review of the lovely Nokia N9, and I noticed that whenever it is put in sleep mode, it does not shut off the screen entirely - instead, it shows a clock that moves around the screen to prevent burn-in. I rather like this idea, and it apparently draws very little juice from the AMOLED screen (which is what my Captivate has).
I spent some time looking for an Android app that accomplishes something like this, but I didn't find anything like it. If there is such an app, could someone point me towards it? If not, is this even possible?
Alright, since this thread doesn't seem to be generating much interest, allow me to bump it with some ideas that might help spark your imagination.
- Replaces sleep mode completely, and might even replace lockscreens
- Displays notification alerts
- Can be toggled on/off by, say, holding down the volume rocker for a few seconds
- Uses the proximity sensor to disable itself when facing down or when placed in one's pocket
- Can be configured to only display under certain conditions (e.g. at night time when plugged in, so as to function as a bedside clock)
- Can cook bacon and eggs
Something like this probably doesn't exist, but would anyone else be interested in something like this if it doesn't use too much battery? If so, I might put up a bounty for whomever brings this to fruition. Would a developer be able to tell me if this is possible? I realize it would probably require root access, but that's fine with me.

Disabling auto-rotate forces landscape - which I don't want!

I include the "Don't want!" in my title because most (perhaps all) threads I've found that discuss screen rotation relate to the desire to have Sense in landscape. One post I found (it may not have been XDA) even said, "Hey, guys! If I disable auto-rotate, I get landscape Sense! Sweet!" I don't want landscape Sense (I use Go launcher, but I've even uninstalled it to ensure that isn't the problem).
When I disable auto-rotate, I want the screen to remain in the orientation it was, as is expected.
I've seen this problem/feature linked to Car Mode and media features. If your in the car dock and exit car mode before undocking, for instance, it will remain in landscape.
Has anyone else encountered this AND considered it a problem?
Any suggested fixes before doing a wipe?
I'm on the verge of returning the phone on account of this and the (non)multi-tasking (which is a bigger issue).
Thanks,
Rob

[Q] NFC issue with Tec Tiles...

I purchased an iOttie car mount for the Note 2 (pretty awesome I might add) and decided to stick a Tec Tile to it (directly under the NFC antenna) so that when I place the phone in the mount, a series of things occur...Media volume 15, Ringer volume 7, CarHome Ultra launch, and Disable Wifi. I programmed the Tec Tile using NFC Task Launcher.
Everything seems to work just fine on the initial read, but after some time (it varies and doesn't seem to hold a pattern), the NFC tag will re-read and start everything over (the screen is on the whole time, btw). Then it will do it again, and again at various times. I can't figure out why it keeps re-reading the tag over and over again at various times.
Additional info:
4.1.1 stock rooted via exploit
Multi-window mod
Brightness nod
Any help would be appreciated.
Thanks,
Jamie
I don't think you will have much luck placing a tile where your phone rest. It will attempt to read it over and over again. I ended up placing a tile on my dash. I hit the tile on my dash on my way to my dock in my car.
Thanks. That's what I did as well. However, just wondering why NFC keeps reading a tag on a random basis with the screen on the whole time. There must be some trigger or time-out internally. Oh well...the workaround works.
vortmax said:
Thanks. That's what I did as well. However, just wondering why NFC keeps reading a tag on a random basis with the screen on the whole time. There must be some trigger or time-out internally. Oh well...the workaround works.
Click to expand...
Click to collapse
I know I found out that WidgetLocker (at least, since I apparently hadn't set it properly so the home button didn't unlock it) didn't properly "lock" my phone, so when I had this setup myself, and I'd turn the screen on, it toggled the tag. Because apparently screen on means the NFC reader turned on as well. Possibly when your screen refreshes it was doing the same thing?

Random Screen Select/Brightness/Charging

I purchased the only 4G model in Brisbane on Thursday. So glad I was talked out of the Galaxy Note!
It's sleek fast, light and all round awesome.
A few little issues...
- It will select a seemingly random spot on the screen and open a program or a link and I am perplexed at what just happened. Sometimes 2 in a row, usually different spots. Is this an issue with the device or just sensitivity to fingerprints/residue?
- Is it possible to modify or add options/settings to the notifications bar? I'd like a brightness slider. I can see no way of quickly changing it.
- I know there are at least 2 high current (2amp) USB charging standards (Samsung, iPhone) and I have dual USB chargers from 'GPS For Less' that work great for my SGS2 and SGT7. I am not convinced however, that they are charging my XZT at full rate.
- I use TouchPal Curve swipe keyboard but I don't seem to be able to make it smaller as I have been able to on my TAB. I have set 'Keyboard size'to smallest and 'Candidate' to small. The full size is great for my single finger typing but way too big for swiping. I also can't find how to turn off unwanted options in the above the keyboard, like MIC and twitter. What am I missing here?
Sent from my SGP321 using XDA Premium HD app
Hagar76 said:
- It will select a seemingly random spot on the screen and open a program or a link and I am perplexed at what just happened. Sometimes 2 in a row, usually different spots. Is this an issue with the device or just sensitivity to fingerprints/residue?
Click to expand...
Click to collapse
This might make you uncomfortable but turn on the screen and attempt to flex the tablet. See if this triggers touch recognition. (Enable show touches in Developer Options to help show this.) I myself have personal experience with the tablet triggering recognition when that happens.
Alternatively, if you haven't updated the tablet to the latest software version, do so. The shipping firmware versions have a serious touch sensitivity problem and newer versions have fixed it.
Hagar76 said:
- Is it possible to modify or add options/settings to the notifications bar? I'd like a brightness slider. I can see no way of quickly changing it.
Click to expand...
Click to collapse
I'm sure you know this, but pressing the wrench&screwdriver icon/top clock section of the notification shade will open some quick settings (a WiFi shortcut, brightness slider, etc.), but other than third party apps that offer notification settings toggles, you can't directly customize the notification menu (like on ASUS' customizations of Android).
Hagar76 said:
- I know there are at least 2 high current (2amp) USB charging standards (Samsung, iPhone) and I have dual USB chargers from 'GPS For Less' that work great for my SGS2 and SGT7. I am not convinced however, that they are charging my XZT at full rate.
Click to expand...
Click to collapse
This is still speculation, but it's said the XPERIA Tablet Z's MicroUSB port has a hard limitation to 500mAh and that you need the SGPDS5 charging cradle to deliver more than that. I do find mine charges in something around 4 hours with said cradle.
I can't help on the keyboard issue. I use the default PObox Japanese XPERIA keyboard.
salanos said:
This might make you uncomfortable but turn on the screen and attempt to flex the tablet. See if this triggers touch recognition. (Enable show touches in Developer Options to help show this.) I myself have personal experience with the tablet triggering recognition when that happens.
Alternatively, if you haven't updated the tablet to the latest software version, do so. The shipping firmware versions have a serious touch sensitivity problem and newer versions have fixed it.
I'm sure you know this, but pressing the wrench&screwdriver icon/top clock section of the notification shade will open some quick settings (a WiFi shortcut, brightness slider, etc.), but other than third party apps that offer notification settings toggles, you can't directly customize the notification menu (like on ASUS' customizations of Android).
This is still speculation, but it's said the XPERIA Tablet Z's MicroUSB port has a hard limitation to 500mAh and that you need the SGPDS5 charging cradle to deliver more than that. I do find mine charges in something around 4 hours with said cradle.
I can't help on the keyboard issue. I use the default PObox Japanese XPERIA keyboard.
Click to expand...
Click to collapse
I enabled 'Show Touches' a couple of days ago to see what it was doing. So, I have just twisted the tablet as suggested, and yes, did get a couple of touches.
Also updated to the latest on Saturday just gone. Now running build 10.1.1.A.1.307 Android 4.1.2. It still does it occasionally. Perhaps not as much. Do I need to call Sony about this?
I downloaded 'Notification Toggle' This does almost exactly what I wanted.Just missing the Brightness slider, but the multi toggle works great.
If the MicroUSB has a hard limitation of 500mAh, how would using a dock increase this? No external device can overcome a hardware limitation.
I should think its more than 500mAh. At that rate it would take well over 12 hours to charge the 6000mAh battery.
I have ordered a USB current/voltage meter so I will do some testing with various chargers and device states and report on this forum.
Hagar76 said:
If the MicroUSB has a hard limitation of 500mAh, how would using a dock increase this? No external device can overcome a hardware limitation.
Click to expand...
Click to collapse
The dock does not use the USB port to charge the tablet's battery; instead, it uses the charging points located on the lower left side of the tablet. The charging points allow for a higher charging ampere value.
Oh Very cool.
I wonder if there will be other non-Sony devices/attachments that will utilise these. I wonder if I could retro something
Hagar76 said:
Oh Very cool.
I wonder if there will be other non-Sony devices/attachments that will utilise these. I wonder if I could retro something
Click to expand...
Click to collapse
I've been using my Galaxy S4 ATT charger with my Tablet Z and it works perfect, my tablet charges very fast, looks like it's using 2A, so maybe the hardware limitation doesn't exist. I've the SGP311.
I must be doing something different as it now seems to be charging at a reasonable rate. The first night, after some hours, it barely charged 20%.

How to prevent burn in

I use my phone very often throughout the day, flash ROMs. The usual with such device as many of you know. To cut to the chase the navbar is almost always lit. So there is a likely hood of the navbar burning in, or the status bar.
More important things will be bolded, and the most important bolded and underlined
1. Go to Settings => Display => Set sleep to the lowest time that will work for you, the lowest - 15 seconds - is the best for your screen.
2. You can turn on inverted colors, this will turn the largely white UI to black. Although this will not look very aesthetically pleasing. It will reduce the burn in probability. - Not desirable I know
3. Change your wallpaper to a solid black color, I don't do this personally. But it does reduce the risk. You can also go for Black and gray wallpapers - you can find very good looking ones - but it won't be as great as just the black wallpaper.
4. Keep your brightness low, this keeps the diodes - pixels - from being at full brightness the entire time. Which lengthens their life span.
5. Change your theme to a black theme, or dark. As this will also help. You can change your keyboard to black from the Google Keyboard app. If you want a absolute black background on a keyboard, use the wallpaper from #3 after hitting "my image" under theme.
6. After extensive use, run a Burn in fixer even if you don't see the affects of burn in. As it changes the pixels that stayed the same for a long period of time. These work by flashing a variety of colors on your screen in semi-rapid succession. Which can also undo some minor burn in. The one I use is here (playstore link) . Run this for around 5-10 minutes before you go to sleep for example, or while you're doing something on your computer.
Hope this helps! This is what I use and I haven't yet gotten burn in on my Nexus 6P after extensive use day to day.
I've never had a problem with burn in on any OLED phone I've had and I've had many.
The most important thing for power savings is a dark theme.
Also, no burn in on my devices, but use a dark wallpaper, theme, etc....
This thread is pure dumbness...it's almost imposible to burn an amoled screen unless it remains lit and static one whole day...normal use will never burn the screen.
Enviado desde mi Nexus 6P mediante Tapatalk
Only poor quality OLED panels exhibit burn in. Except if you display a static image at full brightness for days non stop, something that doesn't happen in normal usage. If you are so paranoid then never buy an amoled phone. It's the same with the silly "battery friendly" battery tips for charging and quick charging. Use your phone like normal. This is why you bought it. It's a device that's built to last only few years and you will change it before major problems arise. That unless you have a very crappy made device.
My Nexus 6p has burn in, I can see the navigation and status bars burnt into the top and bottom. I attribute it to using navigation on long trips and Pokemon Go always needing the screen on. Just started noting it in the last month (got it in the initial preorders).
The app says its for LCD..?
My device has burn on the top and bottom of the screen pretty badly actually and I have the navigation bars hide them selves. I think the screen degrading.
Mines has burn on top and bottom
Sent from my Pixel XL using Tapatalk
This has always been a minor concern with any smart phone I've had, but can't say it's ever happened to me. I did however find a much better way to prevent this that works flawlessly on my [rooted] Nexus 6P. In one of the last few major android versions we got immersive mode (L methinks?), but it's not always accessible depending on phone/manufacturer (haven't seen an option on a stock ROM yet). I use Tasker to run root shell commands from notifications and found the following command a while back (source stack overflow or similar answer site via Google):
settings put global policy_control immersive.full=*
This will toggle full immersive mode. It persists across reboots and fits me perfectly as I enjoy the extra screen estate and I can just swipe from top/bottom to get those bars. Basically makes it like you are always in video mode. This only has to be run once, but I have a companion command to disable just in case:
settings put global policy_control null*
I figure if my normal apps are putting different designs and colors in those areas, I shouldn't have to ever worry about pixel burn in. Plus it's way better than crippling a devices usability with color inversion.
sevro said:
This has always been a minor concern with any smart phone I've had, but can't say it's ever happened to me. I did however find a much better way to prevent this that works flawlessly on my [rooted] Nexus 6P. In one of the last few major android versions we got immersive mode (L methinks?), but it's not always accessible depending on phone/manufacturer (haven't seen an option on a stock ROM yet). I use Tasker to run root shell commands from notifications and found the following command a while back (source stack overflow or similar answer site via Google):
settings put global policy_control immersive.full=*
This will toggle full immersive mode. It persists across reboots and fits me perfectly as I enjoy the extra screen estate and I can just swipe from top/bottom to get those bars. Basically makes it like you are always in video mode. This only has to be run once, but I have a companion command to disable just in case:
settings put global policy_control null*
I figure if my normal apps are putting different designs and colors in those areas, I shouldn't have to ever worry about pixel burn in. Plus it's way better than crippling a devices usability with color inversion.
Click to expand...
Click to collapse
MAN, THANK YOU!!!
THANKS!! :good::highfive:
sevro said:
This has always been a minor concern with any smart phone I've had, but can't say it's ever happened to me. I did however find a much better way to prevent this that works flawlessly on my [rooted] Nexus 6P. In one of the last few major android versions we got immersive mode (L methinks?), but it's not always accessible depending on phone/manufacturer (haven't seen an option on a stock ROM yet). I use Tasker to run root shell commands from notifications and found the following command a while back (source stack overflow or similar answer site via Google):
settings put global policy_control immersive.full=*
This will toggle full immersive mode. It persists across reboots and fits me perfectly as I enjoy the extra screen estate and I can just swipe from top/bottom to get those bars. Basically makes it like you are always in video mode. This only has to be run once, but I have a companion command to disable just in case:
settings put global policy_control null*
I figure if my normal apps are putting different designs and colors in those areas, I shouldn't have to ever worry about pixel burn in. Plus it's way better than crippling a devices usability with color inversion.
Click to expand...
Click to collapse
I had that for a while its baked into my rom but I found it annoying.
Riardon said:
Only poor quality OLED panels exhibit burn in.
Click to expand...
Click to collapse
That is not true. All OLED panels exhibit "burn in", it's the nature of the technology. It's not really burning in though but rather "burning out".
That being said, burn in during normal usage is very unlikely and pretty much impossible unless you use apps that keep the screen on with static picture or UI elements. The only thing that WILL "burn in " on any device, and is just a matter of time, is the status bar and nav bar. But they are both there almost always anyway so you won't even see it unless you decide to switch to pie controls down the road and turn the nav bar off.
As for OP, using a full black wallpaper would actually INCREASE chances of burn in but you don't spend that much time on homescreen for it to matter. Running any burn in "fixers" is absolutely unnecessary and is very unlikely to help once the pixels on your display do degrade unevenly. Basically the only thing you need to do to prevent it is to use common sense. Don't use higher brightness than necessary and don't (over)use apps that leave the screen on with static picture.
---------- Post added at 06:46 PM ---------- Previous post was at 06:38 PM ----------
sevro said:
This has always been a minor concern with any smart phone I've had, but can't say it's ever happened to me. I did however find a much better way to prevent this that works flawlessly on my [rooted] Nexus 6P. In one of the last few major android versions we got immersive mode (L methinks?), but it's not always accessible depending on phone/manufacturer (haven't seen an option on a stock ROM yet). I use Tasker to run root shell commands from notifications and found the following command a while back (source stack overflow or similar answer site via Google):
settings put global policy_control immersive.full=*
This will toggle full immersive mode. It persists across reboots and fits me perfectly as I enjoy the extra screen estate and I can just swipe from top/bottom to get those bars. Basically makes it like you are always in video mode. This only has to be run once, but I have a companion command to disable just in case:
settings put global policy_control null*
I figure if my normal apps are putting different designs and colors in those areas, I shouldn't have to ever worry about pixel burn in. Plus it's way better than crippling a devices usability with color inversion.
Click to expand...
Click to collapse
LMT launcher is your friend. Swiping up just to reveal the nav bar is too much of a hassle. With pie controls you can navigate with just one continuos swipe and you can configure it in any way you want. At first I did this to get back the screen space wasted by navbar but I've realized navigation is actually better than with the nav bar itself. It's also easier to do one handed because it can not only be activated from the bottom but from the sides as well. I urge anyone who dislikes the nav bar to try it. Works flawlessly and for those concerned, it prevents burn in as well.
Jockson said:
LMT launcher is your friend. Swiping up just to reveal the nav bar is too much of a hassle. With pie controls you can navigate with just one continuos swipe and you can configure it in any way you want. At first I did this to get back the screen space wasted by navbar but I've realized navigation is actually better than with the nav bar itself. It's also easier to do one handed because it can not only be activated from the bottom but from the sides as well. I urge anyone who dislikes the nav bar to try it. Works flawlessly and for those concerned, it prevents burn in as well.
Click to expand...
Click to collapse
I actually ran across LMT and used it before I found immersive mode. Extremely robust and customizable. However I use the swipe kinda like a "confirmation" that I want to navigate away. The swipe up and tap is almost second nature now

Categories

Resources