[Q] "SOFTWARE UPDATE INFORMATION CURRENTLY NOT ACCESSIBLE" ... any one facing it?
hi there, now i'm using ew006x.arc rom for 2 days, but today suddenly when i plug my phone x10 to the pc, it say "SOFTWARE UPDATE INFORMATION CURRENTLY NOT ACCESSIBLE"..
previously i'been using free x10 rom with model no: X10i
now ew006x.arc, the model no change to x10a, is it ok or a prob..
have anyone facing this problem or the system is down due to maintenance??
zlive said:
hi there, now i'm using ew006x.arc rom for 2 days, but today suddenly when i plug my phone x10 to the pc, it say "SOFTWARE UPDATE INFORMATION CURRENTLY NOT ACCESSIBLE"..
previously i'been using free x10 rom with model no: X10i
now ew006x.arc, the model no change to x10a, is it ok or a prob..
have anyone facing this problem or the system is down due to maintenance??
Click to expand...
Click to collapse
thats happened if you use the pc companion,
try updating using sony update service.
nujhum said:
thats happened if you use the pc companion,
try updating using sony update service.
Click to expand...
Click to collapse
i have the same problem with my arc LT15i.
but still have the same problem after i use the sony update service.
please someone help me
Related
Hey, I have a x10 mini (E10i) and I want to upgade my baseband (006) to 015 or C00.
I tried this one:
http://forum.xda-developers.com/showthread.php?t=1101332
But didn't work!
And I tried another one but was for x10 min pro, it works but if I active the wifi the phone starts to reboot like forever! O-O
Can anybody help me?
there is no C00 for E10 , this information from sonyericsson blog , i don't know where this baseband come from
so it's highly recommended not to update it till you Sonyericsson pc companion tell u that there is new update for your phone .
if you feel that your mobile is slow try any custom ROM like Minicm 7 or Minicm 6
hamud.q said:
there is no C00 for E10 , this information from sonyericsson blog , i don't know where this baseband come from
so it's highly recommended not to update it till you Sonyericsson pc companion tell u that there is new update for your phone .
if you feel that your mobile is slow try any custom ROM like Minicm 7 or Minicm 6
Click to expand...
Click to collapse
But I want to use this ROM: http://forum.xda-developers.com/showthread.php?t=961707
And the Requirements is:
"Root and CWM recovery already installed (flash it from here)
Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015 due to kernel dependencies."
So I have to change the baseband to 015, mine is 006. D:
no you don't !!
read the requirements carefully : it support the both builds number
2.1.1.A.0.6 (yours )
2.1.1.C.0.0 (the one for E15)
if i answered ur question click thanks button please
It supports his firmware not his baseband.
Sent from my X10mini using XDA Premium App
hamud.q said:
no you don't !!
read the requirements carefully : it support the both builds number
2.1.1.A.0.6 (yours )
2.1.1.C.0.0 (the one for E15)
if i answered ur question click thanks button please
Click to expand...
Click to collapse
It supports my firmware but I have to change my baseband.
Still looking for help... Ç-Ç
you should try with ZEUS or PC Companion. and make sure your connection to update site is not blocked
twins.7 said:
you should try with ZEUS or PC Companion. and make sure your connection to update site is not blocked
Click to expand...
Click to collapse
I tried but my software is the last one.
Anybody?
r.oliveira said:
Anybody?
Click to expand...
Click to collapse
can you post your baseband and firmware code
twins.7 said:
can you post your baseband and firmware code
Click to expand...
Click to collapse
Baseband: M76XX-TSNCJOLYM-53404006
Firmware: 2.1-update1
try "repair option " in pc campanion
after check for update it will till you thant you have the latest version and you can install it again using "repair"
hamud.q said:
try "repair option " in pc campanion
after check for update it will till you thant you have the latest version and you can install it again using "repair"
Click to expand...
Click to collapse
Didn't work. Says that there is no softwar available for my phone.
Still looking for help!
r.oliveira said:
Still looking for help!
Click to expand...
Click to collapse
Repair with seus, not pc companion, and try to update again with seus and it works 100%
Yperion said:
Repair with seus, not pc companion, and try to update again with seus and it works 100%
Click to expand...
Click to collapse
I tried SEUS and says that I have the last software available too! :/
what wrong with your device
have you try to download the latest pc companion on SE website?
twins.7 said:
what wrong with your device
have you try to download the latest pc companion on SE website?
Click to expand...
Click to collapse
Yes I did it!
Maybe it's because I change my build.prop file, my phone was 2.0.2.A.0.520 and I changed to 2.1.1.a.0.6. Is this the problem?
r.oliveira said:
Yes I did it!
Maybe it's because I change my build.prop file, my phone was 2.0.2.A.0.520 and I changed to 2.1.1.a.0.6. Is this the problem?
Click to expand...
Click to collapse
dont connect your phone to usb and start SEUS
then go next and select your phone model from list then next and then it will download framwar then connetct your phone while pressing back button
r.oliveira said:
Yes I did it!
Maybe it's because I change my build.prop file, my phone was 2.0.2.A.0.520 and I changed to 2.1.1.a.0.6. Is this the problem?
Click to expand...
Click to collapse
of course it's a problem. you should restore it with the original one
When I connect my Xperia Neo to the PC Companion say available and update for your phone, I accept update, when the process iniciate stop and emerge a window say:
"Your IP address is not allowed to update/repair brown phone. Please connect to the SEMC network to update your phone." Close.
I have Android Version 2.3.2 and the update say:
Phone software
Current version: 3.0.A.2.181
New version: 4.0.2.A.0.58
How can I fix this problem and have the Update?
Thanks
rcabrujar99 said:
When I connect my Xperia Neo to the PC Companion say available and update for your phone, I accept update, when the process iniciate stop and emerge a window say:
"Your IP address is not allowed to update/repair brown phone. Please connect to the SEMC network to update your phone." Close.
I have Android Version 2.3.2 and the update say:
Phone software
Current version: 3.0.A.2.181
New version: 4.0.2.A.0.58
How can I fix this problem and have the Update?
Thanks
Click to expand...
Click to collapse
Mate learn 1st to search
but go here: http://forum.xda-developers.com/showpost.php?p=21912336&postcount=1
Pandemic said:
Mate learn 1st to search
but go here: http://forum.xda-developers.com/showpost.php?p=21912336&postcount=1
Click to expand...
Click to collapse
That's unrelated. You can use flashtool to update, see the sticky in the dev section.
Have you tried updating your .fw OTA?
problem UpDate the phone Xperia Neo.
rcabrujar99 said:
When I connect my Xperia Neo to the PC Companion say available and update for your phone, I accept update, when the process iniciate stop and emerge a window say:
"Your IP address is not allowed to update/repair brown phone. Please connect to the SEMC network to update your phone." Close.
I have Android Version 2.3.2 and the update say:
Phone software
Current version: 3.0.A.2.181
New version: 4.0.2.A.0.58
How can I fix this problem and have the Update?
Click to expand...
Click to collapse
Flashtool.
Nice, you have brown phone. Remove battery and check on sticker on phone, most likely you will see prototype
you can try with SEUS, I don't expect it to work but you can try.
Don't know if flashtool supports brown phones, I would first ask creator of flashtool. I expect it to work, but ask first
if it says prototype, I would first check what fw is on the phone, is it branded, what region.
some prototypes can die if you flash new fw on them.
Madfysh said:
Nice, you have brown phone. Remove battery and check on sticker on phone, most likely you will see prototype
you can try with SEUS, I don't expect it to work but you can try.
Don't know if flashtool supports brown phones, I would first ask creator of flashtool. I expect it to work, but ask first
if it says prototype, I would first check what fw is on the phone, is it branded, what region.
some prototypes can die if you flash new fw on them.
Click to expand...
Click to collapse
That's really a big worry...he must have got the phone before the official release...from some online vendor.
Sent from my MT11i using XDA
unisol107 said:
That's really a big worry...he must have got the phone before the official release...from some online vendor.
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Oh man. I guess you really need to flash it.
unisol107 said:
That's really a big worry...he must have got the phone before the official release...from some online vendor.
Click to expand...
Click to collapse
Well, not really a big worry. Some people want to have prototypes
Prototypes, from phone models which actually released, meaning you can find that phone model in store, can sometimes be final products, meaning even though they are prototypes, they can be flashed and used like other units. I have one W715, it's final version of prototype, so it can be flashed, but it wasn't in store
Prototypes, from phone models which aren't released are more likely tricky, it need to be careful with them.
johnraziel said:
Oh man. I guess you really need to flash it.
Click to expand...
Click to collapse
If it's working as it is, and if it isn't branded fw, I wouldn't mess with it
Would like to hear OP, what is the situation with phone. And did he bought it in store, or get trough some other ways
Hi to all!
I am Daniel from Greece, and i need your help.
Recently i root my phone.
Everything went well except for one problem.
To catch signal must go out of my house.
I tried to restore the original settings but the problem persists.
Could you please help me with my problem;
SE Xperia X10i
Gingerbread 2.3.3
Greece
Provider : Wind
Yours Sincerely,
Daniel.
Daniel_Balko said:
Hi to all!
I am Daniel from Greece, and i need your help.
Recently i root my phone.
Everything went well except for one problem.
To catch signal must go out of my house.
I tried to restore the original settings but the problem persists.
Could you please help me with my problem;
SE Xperia X10i
Gingerbread 2.3.3
Greece
Provider : Wind
Yours Sincerely,
Daniel.
Click to expand...
Click to collapse
Which baseband are u at?
Sent from my Xperia S using XDA
My foul details are :
Andriod version : 2.3.3
Base band version : 2.1.71
Kernel version : 2.6.29-0054-g5f01537 [email protected]#1
Build number : 3.0.1.G.0.75
Just now I tried the following but the problem remains :
Generic version 2.1update1 build 2.0.A.0.504
It may not be faulty software, but the hardware;
I just saw this...
http://forum.xda-developers.com/showthread.php?p=25701158
Sent from my X10S using XDA
ToledoJab said:
I just saw this...
http://forum.xda-developers.com/showthread.php?p=25701158
Sent from my X10S using XDA
Click to expand...
Click to collapse
Can someone confirm if this works? I have the exact same issue as op posted but haven't had the chance yet to test this. I'm in America and have the American baseband. The fix shown in the link was to fix incorrect settings that caused the guy to have zero reception. I can get reception on the phone but its extremely spotty. When I go into phone info when it has a connection(barely even a few seconds before lost) it says its connected to ATT. That's who the Sims card is through. I'm with sprint now but am wanting to give this phone to a friend. This problem only occurred after root. I've done a Google for this issue and it seems pretty common but people always direct them to this link and when they say it doesn't work (in some cases it does) nothing else is said about the matter and questions are left unanswered. Most people just trash the phone and move on
Sent from my I9300 using XDA
ToledoJab said:
I just saw this...
http://forum.xda-developers.com/showthread.php?p=25701158
Sent from my X10S using XDA
Click to expand...
Click to collapse
First thank you all for your answers!
Unfortunately I can not try this solution, because I gave my phone to SE technician to fix it.
thank you
Daniel
Hi
A newbie could use some serious help. I have an Xperia X10 2010 model that came up with Android 1.6 which I upgraded to 2.1 last year.
Contract over, got it network unlocked. Now, I was able to remove all gmail acounts except for the one associated with Android. Since I need to pass on this phone to family, I need to get rid of that main account.
If Restoring Factory Settings is an option, I can't use it since it'll throw me back to Android 1.6 and checking for an available android update needs a network to be active.
So here I am, want to remove that one bloody account. And upgrade the device to a faster Android version (2.1 is outdated, slow and sucks big time).
I'd be really thankful to get any kind of hel on this one.
Best
SM
Go to the sony mobile website, download the update centre software and install it, after that plug in your phone and follow the on screen instructions.
could you just use flashtool to flash the generic stock 2.3.3 or 2.1 ROM.
that'll quickly fix your problem
or download over wifi?
aR_ChRiS said:
Go to the sony mobile website, download the update centre software and install it, after that plug in your phone and follow the on screen instructions.
Click to expand...
Click to collapse
That's gonna download the latest OFFICIAL version available with Sony for the phone, which, as a matter of fact, is 2.1.
How to remove the associated account first of all?
dawinger said:
could you just use flashtool to flash the generic stock 2.3.3 or 2.1 ROM.
that'll quickly fix your problem
or download over wifi?
Click to expand...
Click to collapse
So the Falshtool should remove my associated account? And since I have 2.1 currently, flashing would persist the version. Android 2.1 and alter, which one is the most stable version for this model?
Thanks for the reply bud!!
sm0820 said:
So the Falshtool should remove my associated account? And since I have 2.1 currently, flashing would persist the version. Android 2.1 and alter, which one is the most stable version for this model?
Thanks for the reply bud!!
Click to expand...
Click to collapse
A factory reset will not send you back to 1.6 it would factory reset the 2.1. Use this link to get 2.3 and don't this will also remove your google account from the phone: http://forum.xda-developers.com/showthread.php?t=
Sent from my X10i using xda app-developers app
You can just use SEUS , it will update your phone to 2.3.3 directly i guess , i use it when my phone get stuck in logo or something get corrupted
Download SEUS from here : http://sony-ericsson-update-service.en.uptodown.com/
Or from here : http://www.sonymobile.com/global-en/tools/update-service/
sm0820 said:
That's gonna download the latest OFFICIAL version available with Sony for the phone, which, as a matter of fact, is 2.1.
How to remove the associated account first of all?
Click to expand...
Click to collapse
The latest official version is 2.3.3.
U hv unlocked the network. Doesn't mean u don't hv an active network. It means u can use any service provider's sim in ur phone. Also, I don't think a sim needs to be in the phone to update it.
And factory reset will only reset the settings to the ones which are default in current android version. The settings in ur actual settings menu. eg.: ur accounts, ringtone, display brightness, that kinda stuff. No changes are made to the firmware.
Upgrade to 2.3.3 instead btw. Don't bother staying on 2.1.. use sony PC companion. Connect the phone, start PC companion. It'll tell u by itself there's an update available. Follow the steps.. don't setup an account when it switches on after update. Pass it on to ur family
Sent from my Xperia X10 using xda app-developers app
Hi... I just bought a brand new Mini Pro, and it came with 2.3 GB Android. I went to software update and it updated to 4.0.2.A.0.62 - but it's still 2.3.4. GingerBread! I tried with PC Companion, it says I have the latest software... how do I get stock ICS?
Thank you in advance
Try Sony Update service
If that doesn't work either, use flashtool and flash the stock ics rom
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
Try Sony Update service
If that doesn't work either, use flashtool and flash the stock ics rom
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Thanks for the quick reply. Sony Update service just informed me that I have the latest software, just like OTA and PC Companion. I then tried with flashtool and 4.1.B.0.431 firmware, which worked after a couple of tries It seems that new phones are not recognized for automatic update to ICS, so it has to be done manually.
Sent from my... PC
galimpic said:
Thanks for the quick reply. Sony Update service just informed me that I have the latest software, just like OTA and PC Companion. I then tried with flashtool and 4.1.B.0.431 firmware, which worked after a couple of tries It seems that new phones are not recognized for automatic update to ICS, so it has to be done manually.
Sent from my... PC
Click to expand...
Click to collapse
Now on .431 you should be able to update to .587, try it
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
Now on .431 you should be able to update to .587, try it
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Yeah, no problem with that... but I noticed something very strange when I removed the battery... my brand new sk17i, bought in june 2013. has 11W37 manufacturing week label! So, either those numbers are not what they seem to be (year W week), or the importer got some cheap, old, recalled, forgotten-in-the-warehouse, first batch units. I checked the manufacturing date because the famous chirping and static clicking sounds are there, I thought that problem was solved with the new units (I used to have mini pro some time last year). Now I know...