Running SC 2.8... did it by Odin to EB01, CWM from jt's thread, used CWM to flash the voodoo version of SC 2.8. Everything works great, except no voodoo. I go to CWM... it says current Voodoo lag fix satus as "disabled" next reboot "enabled". And yet it never changes no matter how many times I reboot.
Any ideas?
battled that for the last few days myself ... check out the new superclean thread ... Odin again (i know it sucks) , install newest super clean , then reflash the Voodoo EB01 kernel from that thread . Its the EB16 kernel that comes with the rom that isnt converting some phones .
Flash that eb01 kernel . did the trick for me after a fresh Odin and install of SC 2.8
lucas.scott said:
battled that for the last few days myself ... check out the new superclean thread ... Odin again (i know it sucks) , install newest super clean , then reflash the Voodoo EB01 kernel from that thread . Its the EB16 kernel that comes with the rom that isnt converting some phones .
Flash that eb01 kernel . did the trick for me after a fresh Odin and install of SC 2.8
Click to expand...
Click to collapse
doboji said:
Running SC 2.8... did it by Odin to EB01, CWM from jt's thread, used CWM to flash the voodoo version of SC 2.8. Everything works great, except no voodoo. I go to CWM... it says current Voodoo lag fix satus as "disabled" next reboot "enabled". And yet it never changes no matter how many times I reboot.
Any ideas?
Click to expand...
Click to collapse
Lucas.scott is right about the kernel in 2.8 not converting for most people and flashing the EB01 kernel on 2.8 might do the trick also. I found it was best for me to odin back to stock EB01, odin red recovery, flash 2.6v, enable voodoo then flash 2.8v with voodoo enabled. That way the conversion was done before moving to 2.8. I've done this several times because I keep trying different themes and setups. Give it shot.
Maybe I am retarded, but doesn't CWM Red always say "VooDoo disabled", "Next Boot enabled" on EB01, regardless of ROM/kernel? I swear I remember reading that. My CWM says that, and I KNOW my Voodoo is up and working great. Oh and I know about the EB16 not converting, I am strictly asking about CWM.
when i booted SC 2.8 it took like 15 seconds, and i didnt hear an andriod talking.. the phone runs great but quadrant around 950, it says VooDoo disabled", "Next Boot enabled" im just try n flash that kernal
ace5198 said:
when i booted SC 2.8 it took like 15 seconds, and i didnt hear an andriod talking.. the phone runs great but quadrant around 950, it says VooDoo disabled", "Next Boot enabled" im just try n flash that kernal
Click to expand...
Click to collapse
Yeah, well, did you use the Eb01 kernel? The eb16 kernel will not convert with voodoo. Use the eb01 kernel, and re-do it. Voodoo WILL convert.
Thanks guys, I will give that a shot... hate to go through the whole shebang again... but then again... it's kinda fun.
I'll post results AFTER the con call I need the phone for in 30 mins
It does display disabled, enabled on next book for me in voodoo cwm. I found that voodoo was still enabled for me when I checked quadrant scored: 1499.
Dread This Day said:
Yeah, well, did you use the Eb01 kernel? The eb16 kernel will not convert with voodoo. Use the eb01 kernel, and re-do it. Voodoo WILL convert.
Click to expand...
Click to collapse
So do I need to re wipe n reflash the rom and the other kernal... Our can I just flash the kernal without wiping
Sent from my SCH-I500 using XDA App
Yep, that did the trick. I:
Odin'ed back to EB01 + CWM
Installed the EB01 Voodoo Kernel
Enabled Voodoo
Installed SC 2.8
Success!
Related
If I'm on eugenes ginger r2 with voodoo.... can I backup and flash to try nero v2 with voodoo and not disable?
I know what's safe, but I can't see where the problem would lie.
Also, check out Voodoo Toggle in the Market. Amazing app.
Well supercurio if I'm not mistaken mentioned that there its no need to disable it if you go from ext4 to ext4 supported kernel/rom combination. I might be wrong though. ODIN or alternative should always be ready.
Sent from my bionix powered Vibrant
I second that notion. I also read that you can go from one voodoo rom to another without disabling voodoo.
Cool. ended up disabling using that app just to be safe...and I didn't have the patience.
lqaddict said:
Well supercurio if I'm not mistaken mentioned that there its no need to disable it if you go from ext4 to ext4 supported kernel/rom combination. I might be wrong though. ODIN or alternative should always be ready.
Sent from my bionix powered Vibrant
Click to expand...
Click to collapse
That is exactly right.
Worst-Case scenerio, the new rom doesnt have voodoo and you forget to disable,.... you'll get stuck at the boot, and then you will just use ODIN which will overwrite voodoo right?
Seems like there is no disadvantage to voodoo if that's the case.
s15274n said:
Worst-Case scenerio, the new rom doesnt have voodoo and you forget to disable,.... you'll get stuck at the boot, and then you will just use ODIN which will overwrite voodoo right?
Seems like there is no disadvantage to voodoo if that's the case.
Click to expand...
Click to collapse
As long as you can reliably get into the download mode if need be.
Also if you brick with voodoo don't you have to odin eugenes froyo that doesn't brick then odin to jfd?
Nero2voodoo+jl5 modem
^ really? Seems like any ODIN would work since it overwrites the system.
s15274n said:
Worst-Case scenerio, the new rom doesnt have voodoo and you forget to disable,.... you'll get stuck at the boot, and then you will just use ODIN which will overwrite voodoo right?
Seems like there is no disadvantage to voodoo if that's the case.
Click to expand...
Click to collapse
Actually sometimes ODIN Cannot always fix an EXT4 messup like voodoo when trying to flash a new rom, so just letting you know, it's happened to me.
BTW, I just went from Nero V1 JL4+voodoo to NeroV2+voodoo w/o disabling voodoo the whole flash took a little less than 3 minutes, and there are no bricks on my table
lqaddict said:
BTW, I just went from Nero V1 JL4+voodoo to NeroV2+voodoo w/o disabling voodoo the whole flash took a little less than 3 minutes, and there are no bricks on my table
Click to expand...
Click to collapse
Thats because the newest version of nero is already written with voodoo. To those flashing other roms that are not written with the voodoo kernel and ext4 compatability, disable voodoo prior to flashing your new rom, or else be ready to spend some time with odin.
Ginger Clone's of the World Unite! Via the XDA App
Ok, So I flashed superclean 2.7 and it borked my phone. So I used Odin and the EB01 and PIT files mr.adrenalyne gave us as a fix for the situation. So after flashing via odin, I flashed CWR ALL tar file. Up until this everything worked great and I thought my ordeal was over. I opened root explorer and noticed a file called voodoo saved. So I booted into recovery and it went straight to red. Used to go to blue recovery then I would have to apply update.zip to red. So I checked the voodoo in recovery and it said lagfix and voodoo were both enabled. Im very puzzled by this and really only have 2 questions. How did I get voodoo and more importantly how do I get rid of it? As in total stock no traces of voodoo. Any help is appreciated. Thanks
Sent from my SCH-I500 using XDA App
http://forum.xda-developers.com/showthread.php?t=979744
read.
Whats up mike, I followed this method over at the AC forum, It doesnt work. After I disable lagfix and flash a new non voodoo kernel I then go into odin and flash back to stock EB01, boot, flash new CWM all and boom. Back to.voodoo enabled. I think im gonna have to format internal SD card to rid myself of this. Something is off and I cant seem to get of voodoo.
Sent from my SCH-I500 using XDA App
Try adrynalyne's 2.7 fix. There is a tar/odin in there that you should flash. It sounds like a dbdata issue.
After flashing the eb01 all in one, you can flash whatever rom you like.
GrainOsand said:
Whats up mike, I followed this method over at the AC forum, It doesnt work. After I disable lagfix and flash a new non voodoo kernel I then go into odin and flash back to stock EB01, boot, flash new CWM all and boom. Back to.voodoo enabled. I think im gonna have to format internal SD card to rid myself of this. Something is off and I cant seem to get of voodoo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
it does work. you are missing something. if you flash nonvoodoo kernel and you can boot your phone then you dont have lag fix enabled. get quadrent from the market and run it. what is your score.
Ok I finally got it, I took a little trip over to the IRC, where one of the devs helped me figure it out. Turns out I must of picked up a corrupt file somewhere. Ive flashed my phone so many times since DL30 leak showed up I couldnt tell you where it came from, but no matter what I did or flashed I was still showing voodoo. To make a long story short I ended having to use heimdall to go back to the original build, the one before DI01. After that was done I was able to build my way back to EB01. Thanks for the help its all good now.
Sent from my SCH-I500 using XDA App
hi, i tried to search but got no luck, im going to flash back to stock eclair, downloaded everything necessarry (odin, rom and pit) but :
i saw somewhere that voodoo can cause a bootloop if i flash a rom with odin. im now using bionix 1.3.1.
what i did is disabled vooodoo lagfix on CWR, on voodoo control app, it says my phone does not have a kernell that suport voodoo features, so i think im good to go.
can i flash or i need to do anything else so nothing wrong happens?
downloaded voodoo toggle and turned it off, its trustable?
yes. before you flash back to stock make sure there's the disable voodoo file in your voodoo folder.
Sent from my SGH-T959 using XDA App
I would like to restore my fascinate to stock and i have the red CWM Voodoo lagfix recovery 2.5.1
i've read some say this needs to be completely removed and others say just disabling voodoo is fine. So i'm not sure what to do?
this thread has instructions for restoring to stock http://forum.xda-developers.com/showthread.php?t=782204 but the link to remove voodoo has it broken down into versions and i have no idea what version voodoo is on my phone?
Can someone point me in the right direction here? thanks!
When I was running on Superclean 2.9.2 and flashed back to EB01 stock, I was running on voodoo. After I flashed back it converted me to all the stock, including kernel which is nonvoodoo.
So in other words everything worked fine for me when I flashed to EB01 stock when I was running voodoo.
pikanate1 said:
When I was running on Superclean 2.9.2 and flashed back to EB01 stock, I was running on voodoo. After I flashed back it converted me to all the stock, including kernel which is nonvoodoo.
So in other words everything worked fine for me when I flashed to EB01 stock when I was running voodoo.
Click to expand...
Click to collapse
Its probably ok if you use a back to stock odin such as eb01 or di01, but say your running voodoo and you flash sc 2.92 in cw, which contains a non voodoo kernal... if you dont disable lagfix first youve got a brick... i just did it the other day. Wanted to get rid of a theme i was running, forgot i was on voodoo and reflashed sc... trouble, stuck on samsung logo, fixed it with the all in one eb01
Sent from my Superclean Voodoo Fascinate
Yeah nonvoodoo over voodoo is a big no no
Sent from my SCH-I500 using XDA Premium App
I am currently running SC 2.9.2 with jt's voodoo kernel. I understand how to disable and re-enable voodoo. My question is if the rom I want to flash is voodoo only should I re-enable voodoo before flashing? Also will it matter if it is enabled or disabled when flashing a new radio or kernel?
I want to use the community rom with the latest voodoo kernel to enable bln, UV, and OC
Thanks in advance for the help!
mdisbrow said:
I am currently running SC 2.9.2 with jt's voodoo kernel. I understand how to disable and re-enable voodoo. My question is if the rom I want to flash is voodoo only should I re-enable voodoo before flashing? Also will it matter if it is enabled or disabled when flashing a new radio or kernel?
I want to use the community rom with the latest voodoo kernel to enable bln, UV, and OC
Thanks in advance for the help!
Click to expand...
Click to collapse
If you are currently running voodoo then you can just flash the community rom as you are going from voodoo to voodoo. its only an issue when going from voodoo to non voodoo in which you would have to disable voodoo then before flashing a non voodoo rom.
fitti28 said:
If you are currently running voodoo then you can just flash the community rom as you are going from voodoo to voodoo. its only an issue when going from voodoo to non voodoo in which you would have to disable voodoo then before flashing a non voodoo rom.
Click to expand...
Click to collapse
Alright awesome and it doesn't matter when flashing the radio at all I take it?
mdisbrow said:
Alright awesome and it doesn't matter when flashing the radio at all I take it?
Click to expand...
Click to collapse
What radio are you running currently? The kernel that is included in the community rom will turn on voodoo but to be safe you can always enable it so that you are sure its enabled.
fitti28 said:
What radio are you running currently? The kernel that is included in the community rom will turn on voodoo but to be safe you can always enable it so that you are sure its enabled.
Click to expand...
Click to collapse
EB01 obviously I want ED01 but from reading the forums it looks like it is a real pain in the ass to get. Suggestions?
Ughh I might just flash EC01 and see how that goes I dont want to be flashing my phone for the next hour
mdisbrow said:
EB01 obviously I want ED01 but from reading the forums it looks like it is a real pain in the ass to get. Suggestions?
Click to expand...
Click to collapse
I followed these directions from adrynalyne. It wasnt bad at all.
So many of us are rooted...so many...
Getting to ED01 isn't easy without any radio leak. So, to get to ED01, so you can get yer bran' spankin' new modem!, follow these directions.
First, we will downgrade to DL09.
Do this by flashing this DL09 package in Odin (pda button, pda button, pda button)
http://adrynalyne.us/files/stuff/
Then, download this EA28 update.zip, put it on your sd card, reboot to recovery and flash:
http://www.multiupload.com/F00OYXVO0K
Finally, download this ED01 update.zip put it on your sdcard, and reboot to recovery and flash:
http://www.multiupload.com/LPI21AP8TD
Then, flash whatever the latest and great cwr 2.5.x is (I've not kept track.) Do not use cwr 3.x for now, imo. You can then flash one of the stock rooted roms, or root yourself via flashing a super user package from cwr.
Good luck!
Note: Keep in mind that once you Odin CWR to ED01, you MUST also flash a kernel, or rom containing a kernel to replace the stock one, or it will revert you.
Boot first to CWR after Odin, and install Community Rom v1.0 as it contains a kernel
http://forum.xda-developers.com/showthread.php?t=1044474
Yeah thats what I was reading going to give EC01 a shot with the community mod first and see how that works out first seems a lot of people are thinking they are similar
yeah not much different at all. I just went to ed01 as i was wiping anyhow and his directions we straight forward but try ec01 then community v1.0 then you can flash v1.2
Thats what I'm going to do hopefully an odin ED01 package comes out I have a feeling EC01 will hold me over until then
Thanks for the help much more confident using voodoo
mdisbrow said:
Thats what I'm going to do hopefully an odin ED01 package comes out I have a feeling EC01 will hold me over until then
Thanks for the help much more confident using voodoo
Click to expand...
Click to collapse
This link also has good information about voodoo
http://forum.androidcentral.com/ver...11-kernel-built-source-sound-undervolted.html
This link also has information regarding voltage control as the kernel allows you to customize the voltages.
http://forum.androidcentral.com/ver...oms-hacks/79749-voltage-control-settings.html