Related
I personally love the feel of my vibrant without the silicon casing on but unfortunately, I have to go with it whenever I leave the house to protect it from knicks and knacks (plus I always seem to drop my phone...)
I have a screen protector (REALOOK) and a TPU case. I too like the way the phone feels and looks without a case but yea, it needs to be protected. My old G1 got bang up pretty bad by not using protection... LOL...
I've had my vibrant in a case since day one but still have scratches all over the body. I think the shiny plastic material is just scratch prone. If I had to do over I would have tried some of the clear body armor type product. Definitely love the bare feel, may just go without a case and hope replacement parts become available.
Sent from my GT-I9000 using XDA App
I have the stealthguards screen protector and battery cover protector. Both are mainly on there just for weight and grip and the front is also on to make my vibrant have a flush front.
Silicone = ****
polyurethane Is The Way To Go, Alot More Protective And A Better Fit For Your Phone
I rock mine naked. I had a hard clear case for my G1, but it really didn't do a whole lot of good and my screen didn't get scratched at all. The Vibrant has gorilla glass and you get a 2nd back cover out of the box so I decided to go without.
I've got a realook screen protector and the tmobile gel case.
My battery cover AND the faux metal bezel are pretty scratched up. Been in the case since day one, so I suspect the gel case scratches it. Go figure.
I honestly didn't like the bare feel. Too slippery and small, so now I have a rubber case in it. Fits like a glove and grips better while still sliding out of the pocket without sticking. And of course a screen protector. I kept one on my g1 since day one. Its beaten to hell, the lip part is cracked and the sdcard unmounts if you apply pressure but the screen is flawless lol
Sent from my SGH-T959 using Tapatalk
I use a Casemate Tough Case and have been using this style of case on all my phones for years. Usually Otterbox, but they took too long this time around so I gave the Casemate a try. I never drop my phone, but I have two kids under 5, so the cases are definitely tested from time to time. There are no better cases if you want real protection, IMO.
Sent from my SGH-T959 using XDA App
I've got the hard Body Glove case with the black rubberized back. I haven't tried any other cases because I really like this one. The phone just felt too fragile to me without a case, this gives it a little bulk and makes it feel a little more substantial.
No screen protector. I haven't seen the need for one. I'm not super careful with it either and will carry it in a pocket with keys and loose change pretty often. Been doing this for 2 months and no scratches on my screen. The screen is definitely pretty tough.
this is a $500 phone, and it's slippery. I drop **** all the time so i got the silicon case. it looks lumpy, but it's worth it.
mmas0n said:
I use a Casemate Tough Case and have been using this style of case on all my phones for years. Usually Otterbox, but they took too long this time around so I gave the Casemate a try. I never drop my phone, but I have two kids under 5, so the cases are definitely tested from time to time. There are no better cases if you want real protection, IMO.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have the same case and 3 kids under 5. Its the best option for me and feels really solid while holding.
I have hybrid TPU case, and so do allot of others here
...id vote but not listed in poll...hint hint
smutek said:
I've got the hard Body Glove case with the black rubberized back. I haven't tried any other cases because I really like this one. The phone just felt too fragile to me without a case, this gives it a little bulk and makes it feel a little more substantial.
Click to expand...
Click to collapse
Couldn't have said it better. I use the BG case, and love it -- the look, the kickstand, the added bulk. (The "naked" (ugh) phone is too thin to hold comfortably on a call; and others have said, it's slippery as hell.
I utilized the stealthguard front and back. So its practically naked.. but not naked
me like sexi like bikini oki
hottie girls
I'm amazed by the durability of the screen. I don't make it a habit of putting it in my pocket with anything inside, but when I have and cringed as I pulled it out expecting scratches, to my surprise no scratches.
As a rule, the harder the cover material, the more the shock will be transferred directly to the phone. The same for the sticker types which are more for protection against scratches.
I ended up buying a cover from tmo because the phone felt a little slippery by itself. Its made of silicone and think enough to absord some of the impact if it is dropped and us les likely to slip out of your hand.
Sent from my SGH-T959 using Tapatalk
I bought the tmo black silicone case. I really like it because it adds grip and gives the phone a more solid, quality feel. One thing I've noticed is if you take the back cover plate off too much...it gets loose and creaky. They really should have gone with the slide lock type.
Sent from: my Vibrant juiced with Eugene's 2.2 Froyo JPM
Case-Mate Tough Case.. no screen protector here
I use a RealLook screen protector and one of these clear, hard cases:
http://www.buy.com/pr/product.aspx?sku=217139826
Super inexpensive (bought 2, 1 extra to have on-hand)! Been using clear hard cases like these since my MyTouch3G and I've dropped it (the MT3G) several times onto concrete without a single scratch or damage to the phone. The case took the brunt of the impact. Put a very small crack in it, but nothing else. Ended up replacing it anyway, but that was enough to make me buy them for the Vibrant now. I just don't get that sense of protection from a semi-thin silicone sleeve. Sort of like gluing a bunch of balloons to the exterior of your car and thinking it's going to protect you in a head-on collision. Just not buying it...
I have a question about this case. I found it for $12 on amazon and I think it's worth it and I think it will work great. However, I have some concerns about the screen protector and how messy/clean it is and how easy it is to apply. Also im worried about if it glares a lot because that would be a problem to me. My other concern though is I saw in some video reviews that the top of the case it doesn't 'hug' it firmly there and is kinda loose at that spot. Is this an issue or should it be fine?
Thanks
The screen protector scratches relatively easily, but that isn't a huge problem, and it doesn't glare. The protector is also the exact size of the screen, so if you get it a millimeter off, you'll have an ugly white line with grime underneath. The protector is applied dryly and needs to be applied very quickly or else dust particles will quickly attach to it. It's also kind of tricky getting it on, as the instructions aren't the best. If you don't get it on right the first time, it's a real pain. I resolved this by washing the protector and using a lint roller to get the dust off before reapplying.
The case itself is great and looks nice, and it's protected my phone from a launch onto hardwood from about 4 feet. As you said, the case doesn't hug the phone properly at the top and bottom. The amount of "hug" will vary from case to case, mine is right on there (still floppy though) but my brother's case has a massive gap. I heard they fixed it with a more recent design though. One of my biggest gripes is that the silicon is a dust/lint magnet, and there's always dust/lint getting into the top/bottom gaps. This is really unsightly and I need to clean the dust regularly as it bothers me, and do a full case clean every week. I also don't dig the hard plastic as I have dry skin, which makes it difficult to hold.
yeah that would be a deal breaker for me.. I had a silicone case for my previous phone and I actually didn't use it because I needed to freely move my fingers off and on the edges (fruit ninja lol). Tho I don't play that game anymore really. My other concern is will the top of the phone when your putting it into your pocket have like a 'drag' effect due to the silicone and it not being tight on the top or does it cleanly go in/out of the pocket when its rubbing against your pocket? That was also kinda an issue to me as well with my old phone. Also what other cases would you recommend (can be another otterbox)? I might be looking for another case if I don't determine this one suiting me.
I have this case. I chose not to use the screen protector so I cant comment on that. The case is great. The rubber piece that protects the mirco usb charger is annoying as hell (not sure why i havent cut it off yet.) The phone does seem to slide towards the bottom sometimes so there can be a small gap at the top. I would recomend this case. especially at $12
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
Spigen slim armour is a decent case. It's not too big in your pocket, doesn't stick, and has 2 piece construction for decent shock absorption.
Ah, I've seen it. Looks pretty nice. Might just say screw it and go with zerolemon lol
Great case, but too dang bulky, i love my spigen case
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
I have always wondered why I dont see more people using body glove cases, I have been using them for years, they are slim, look good, good quality, protect the phone well and the price is good, there are alot of other good cases out there but I found the body glove case is just as good and runs about $15, alot less then most other good cases....otter boxes suck, they are bulky as hell and never liked them, I had one a few years ago on a phone and got rid of it, my work gives me an I-phone to use and aside from the phone being a piece of s**t they make me keep an otter box on it, it makes the phone even more of a piece of s**t, LOL.....
Hahaha yeah I feel it. I took mine off my of DNA cause it just felt ****ty and I ended up shattering that phone but I have it on the g3 only because I don't wanna destroy this. I rarely drop my phones too but it only takes that one unlucky time. I shall buy dis new case
I had this case for a while and liked it...http://www.bestbuy.com/site/platinu...lack/7251018.p?id=1219260610755&skuId=7251018
I've now got the spigen slim armor and overall I like it....however the slicker back makes it not sit still when laid flat on a table or something, and the volume cutout sucks imho. But other than that a solid choice.
I picked up the Body Glove Rise case today at Walmart. I had a Body Glove on my last phone (RAZR HD) and it worked well. Dropped the phone (RAZR that is) once or twice and no damage or anything to the phone. One drop was face down and the bezel protection really did it's job. Overall, I like this case as it doesn't add much bulk at all so it still fits in my pocket comfortably. Haven't dropped the G3 yet and hopefully, never will, but this case gives me a sense of protection that I didn't have when the phone was naked. Doesn't mean I'll be less careful with it. On the contrary, I'll still continue to be cognizant of maintaining a firm grip on the phone at all times, but at least I have a better chance of the phone surviving a drop with the case than without it.
It looks nice too and now I feel like I have a better grip on the phone.
Which case did you get, the defender or the symmetry? I got the defender, and yeah, great protection, but makes the phone way too big. I was wondering if the symmetry was a little less cumbersome.
I've used otterbox commuter cases in the past and loved them, but this phone is so damn big already, I'm looking for recommendations myself.
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
I went from the defender to the Seidio Dilex case/holster combo. Great made case!
Sent from my LG G3
My son had his LG g3 in the OtterBox for some time, I took it out of the OtterBox to put a QI receiver on the back to surprise him for Christmas by having his phone on a QI charger when he woke up. The edges all the way around the phone or severely scuffed for the inside of that case. Not the front or the back, just the edges. He's not using that case anymore.
This is the one I'm using, similar to the OtterBox, but much nicer.
3 in 1 Rugged High Impact Hybrid Anti-Shock Pads Hard + Soft Durabl... http://www.amazon.com/dp/B00MC64WP4/ref=cm_sw_r_udp_awd_MnHQub1D00G06
I have had many cases on the g3, from Incipo, spigen, off brand cheapos and now the Defender from Otterbox. It definitely adds bulk, but by far the most protection. I feel better now, peace of mind I suppose.
Loved the slim armor spigen, but it scratches like crazy!
The Spigen Slim Armor is nice, but mine has issues with popping out of the corners sometimes. Theres a case called the Hyperion thats nice too. Dual layer but just not as protective
Anybody have anything to report on the SUPCASE Unicorn Beetle Pro cases?
$22 from Amazon http://www.supcase.com/smartphone-c...eries-full-body-rugged-hybrid-protective-case
http://www.amazon.com/Unicorn-Beetl..._2_m?s=wireless&ie=UTF8&qid=1429209281&sr=1-2
Well I just bought the blue Otterbox Defender for my new G3 and I like it so far. I just wish the rubber outer layer was the soft silicone rubber instead of the harder rubber but it'll do.
A big thanks to several members of this community, biggest thanks goes to T-R as I followed much of his instructions here
My goal was to replace the back but also place metal plates for my CD tray magnetic car holder.
I ordered three of the factory second backs from SlickWraps, the dark leather, football leather and cork. My first try was going to be with the cork as I figured it to be the most forgiving. I ordered the same plastic sheeting and 3M strips that T-R ordered.
Tools I used:
Hair Dryer to heat back
Library card to help peel off back
Pick to start initial prying of back
1/16th drill bit for microphone hole
Xacto knife to cut plastic sheet
Dremel to cut metal plate
I'm not good at step by step instructions so I apologize for not walking through what steps it took to make this happen. Feel free to ask if you are curious. My first attempt at the metal plate was too big and the back kept popping off. I put only one of the plates back over the little divot under the camera but didn't take pics before putting back on again as I didn't think it would work, seems it did.
My pros and cons and pics.
Pros:
Love the feel of the cork
Feels close to stock when not being nit picky
My slickwrap experience was great, order on Wednesday, in my mailbox on Friday
Fit of the cork back is impressively good minus one issue, see below
Cons:
Buy extra stickers, I screwed up the first and was glad to have a second but will need more if I want to change it
Mic hole is no where near where it should be on the cork back, might be part of why it's a factory second
Stickers are not as strong as the Motorola goop
Rookie mistake:
I had left the screen naked while working on all of this and scratched the hell out of it (my standards, others ask where when they look at it)
thanks for sharing. always love to see pics of what others are doing. what kind of magnetic holder do u use? any pics of the damage to the screen?
sand1303 said:
thanks for sharing. always love to see pics of what others are doing. what kind of magnetic holder do u use? any pics of the damage to the screen?
Click to expand...
Click to collapse
I tried taking a pic of the scratches and they don't show up well; they are probably not as bad as I make them out to be. I switched over to this mount because it has the strongest magnet I could find in a CD mount holder.
I'm tempted to switch the back out for one of the leather ones, I'm never satisfied.
No matter how nice it looks, it's certainly not worth scratching the screen for. I never put my phone face down on any surface that is not soft and I've never scratched the screen on any of my numerous phones. I hate screen protectors because they always look and feel horrible but I am super careful about the screen. That's the bit you interact with all the time and it would really bother me to have even the slightest scratch on it.
Otherwise, good job.
Was curious on how the plastic backing under the skin was holding in terms of sticking. I was thinking about doing the same thing and wanted to know how good the plastic/tape combo was at holding over time. Any lifting occur?
Jawrduhn said:
Was curious on how the plastic backing under the skin was holding in terms of sticking. I was thinking about doing the same thing and wanted to know how good the plastic/tape combo was at holding over time. Any lifting occur?
Click to expand...
Click to collapse
My first install was my learning exercise and I can't say it would have survived long term, started popping up on the edges. Just this past week I installed the football textured leather back and am very happy with it. Thus far it is not popping up anywhere but I had learned a lot from my last install. New learnings:
Have a brand new x-acto blade, works so much easier making the plastic template back
Scuff the plastic backing before applying the sticker, it comes shiny and smooth
I bought a heat gun and found out quickly the plastic back can warp easily so be careful when heating it
Still heat it though and hold for a good 30-60 seconds after
Leave a small gap around around the sticky tape after applying to the back, if you try to cut it perfect you land up with a bare edge
Install the plastic back first to the phone, leave it for a day if you can. If it pops up, heat the hell out of it and hold as strongly as you can for a minute or so ( I wore gloves)
Heat again after applying the leather back, heat really helps the application stick
If you buy the regular leather be aware it's not treated with any water resistance or proofing and any water will mark it.
If you are buying the Factory Second versions buy a couple, they are only $10 each and $2 shipping total.
The bump near the camera is from the metal plate I installed for my car mount, I couldn't fully conceal it.
thepktrckt said:
My first install was my learning exercise and I can't say it would have survived long term, started popping up on the edges. Just this past week I installed the football textured leather back and am very happy with it. Thus far it is not popping up anywhere but I had learned a lot from my last install. New learnings:
Have a brand new x-acto blade, works so much easier making the plastic template back
Scuff the plastic backing before applying the sticker, it comes shiny and smooth
I bought a heat gun and found out quickly the plastic back can warp easily so be careful when heating it
Still heat it though and hold for a good 30-60 seconds after
Leave a small gap around around the sticky tape after applying to the back, if you try to cut it perfect you land up with a bare edge
Install the plastic back first to the phone, leave it for a day if you can. If it pops up, heat the hell out of it and hold as strongly as you can for a minute or so ( I wore gloves)
Heat again after applying the leather back, heat really helps the application stick
If you buy the regular leather be aware it's not treated with any water resistance or proofing and any water will mark it.
If you are buying the Factory Second versions buy a couple, they are only $10 each and $2 shipping total.
The bump near the camera is from the metal plate I installed for my car mount, I couldn't fully conceal it.
Click to expand...
Click to collapse
Awesome, thanks for the tips. I'm actually using a skin from TOAST so I'll see how everything pans out.
thepktrckt said:
My first install was my learning exercise and I can't say it would have survived long term, started popping up on the edges. Just this past week I installed the football textured leather back and am very happy with it. Thus far it is not popping up anywhere but I had learned a lot from my last install. New learnings:
Have a brand new x-acto blade, works so much easier making the plastic template back
Scuff the plastic backing before applying the sticker, it comes shiny and smooth
I bought a heat gun and found out quickly the plastic back can warp easily so be careful when heating it
Still heat it though and hold for a good 30-60 seconds after
Leave a small gap around around the sticky tape after applying to the back, if you try to cut it perfect you land up with a bare edge
Install the plastic back first to the phone, leave it for a day if you can. If it pops up, heat the hell out of it and hold as strongly as you can for a minute or so ( I wore gloves)
Heat again after applying the leather back, heat really helps the application stick
If you buy the regular leather be aware it's not treated with any water resistance or proofing and any water will mark it.
If you are buying the Factory Second versions buy a couple, they are only $10 each and $2 shipping total.
The bump near the camera is from the metal plate I installed for my car mount, I couldn't fully conceal it.
Click to expand...
Click to collapse
Is it a formed vinyl patterned or really leather? footballs are supposed to be made of pig leather right?
I'd like to see ostrich
LOL haven't seen Ostrich yet. It's definitely textured bovine leather not plastic and looks like it is treated as I haven't had any water stains yet.
Forgot to ask, when you said your first attempt had he edges raising, were you referring to the plastic or the leather?
lotus49 said:
No matter how nice it looks, it's certainly not worth scratching the screen for.
Click to expand...
Click to collapse
I agree. Even the slightest hint of a scratch and I would lose a bunch of sleep. But unlike you, I use a glass protector which feels like the phone screen.
Jawrduhn said:
Forgot to ask, when you said your first attempt had he edges raising, were you referring to the plastic or the leather?
Click to expand...
Click to collapse
Both but most of it was the plastic peeling off of the back of the phone. It was applied twice though and I'm certain that impacted the adhesion.
My Nexus with Cork back from Slickwraps.
http://kryon.smugmug.com/Purenexus/i-bRKJdsk/0/O/OPERATIONPNbanner5x1.png
Has anyone installed this without the replacement back? and if so can I get a pic?
How is the cork back holding out for you. Can you post any pics after wear and tear.
Sent from my Nexus 6 using Tapatalk
I am at work so I can't post pics but I made the jump and got one a couple weeks ago. I like the way it looks but if you tend to work on cars or have dirty hands from working, this is not for you. My cork back is filthy but not too noticeable unless you've seen it beforehand.
I'm diggin' the cork look!
Hi,
Unfortunately ceramic version also get scratches. After over year of using I've got some really ugly, big scratches on ceramic back.
I wonder if it is possible to polish back surface? Does anyone tried?
I have some experience with polishing car parts, but it's totally different item.
How do you think? Is is possible to polish ceramic? Or maybe I will get only worse...
Hello . Tbh I'm not sure what I would do. As it is a phone. How ever! It is possible to get scratches out of ceramic.
Take the back of (if you can)
mark with chalk all the scratches easy to wipe off.
get a bowl or something filled with nice hot water not to hot though you got a stick you hand in. Make it warm. Shuv some dishwasher liquid in. Good quality. Like fairy liquid or something.
CLEAN THEM SCRATCHES!
then wipe up the scratches and dry up with a clean cloth. One that doesn't leave bobbles or rubbish.
Put a small bit of brass polisher on a clean, soft cloth. Apparently tooth paste or vinagre works, but not tried it. Rub the product into the scratches and all the edges, like your wax a car. Circle Circle circles keep doing it. Eventually the scratches should no longer be visible.
you can stop there although when I did my bathroom tiles I used some car wax just to protect the areas.
I hope this helps. . Don't run at me with knives and lemons if it ruins your phone please xD this works on real ceramic....
Hope I assisted .
Mine with more or less one year old have no scratches in ceramic, only on the aluminium(?) edge and some light scratches in front glass. I have used it almost all time withou a case. !!!!