Hi, I recently picked up an Archos 32 and have just tried to utilize the TV out feature. I started with a 3.5mm jack to rca (red/white/yellow) cable which was taken from an digital camcorder and that has been used for TV out on an iPod before. I also tried a 3.5mm to RCA stereo (audio red/white only), but that did not work either and did not even produce and image.
I have the correct settings (NTSC 4:3 or 16:9), and have tried this on three TVs. Each time, the image shown is scrambled. The left half of the screen ghost images to the right side, and vice versa. I can see semblances of my home screen icons, so I know the picture is coming from the unit. I also know that Archos uses the red as video out, but I have tested every combination anyway.
Has anyone else encountered such a problem? Or have an alternate way of connecting the unit to a TV (preferably non-HD)?
The unit is fairly brand new (~2weeks), but I would rather not have to replace it unnecessarily.
Nevermind, turns out I had to pull the 3.55mm jack out slightly.
Related
i know the TV out isto 3 phono, and can display in Pal or NTSC but it would be useful if there is a VGA one or a good way to do it,
any ideas
monkeyturnip said:
i know the TV out isto 3 phono, and can display in Pal or NTSC but it would be useful if there is a VGA one or a good way to do it,
any ideas
Click to expand...
Click to collapse
Search for these kind of cables:
http://www.nextag.com/Cables-to-Go-25FT-61235427/prices-html?nxtg=28c70a1c052e-34FA18FCC0551E95
RGB to VGA
monkeyturnip said:
i know the TV out isto 3 phono, and can display in Pal or NTSC but it would be useful if there is a VGA one or a good way to do it,
any ideas
Click to expand...
Click to collapse
I'm with you. I wanted to use a PC monitor for Remote Desktop control of a couple of PCs and servers with the TP2 (as I do with the Athena). Using the TP video out and converter cables will have the cables outweigh the phone by a factor of about 2 to 1.
I believe the output on the Blackstone is composite, not component in which case I don't think that would work.
Although you can get active converters to convert composite video to VGA/RGBHV, there will be a considerable loss of quality, especially in the fine detail. Basically, it will look very blurry.
There's plenty of them on Ebay, search for EXTUSB video , or "Touch pro video"
Yep, bought one of those composite/VGA converter boxes and can definitely confirm the loss of quality/bluriness. Also too bulky to carry around conveniently and requires a power supply. Hooked my Archos up yesterday (TP2 arrived today...!) just to remind myself, as it has the same screen res and also outputs via composite and apart from it being blurry, the image also flickers, which is quite annoying. Hadn't really noticed it before, cause it's not that noticable when watching video, but when viewing text or a presentation, that would be seriously off-putting! May just be my converter box, but thinking about the conversions the signal has to go through, I can't belive other converters are going to be much better.
BO$$
"Reqiures powersupply" ?
I cannot remeber that I used power supply with it, but yes, it does have a power-supply connector to allow charging while using tv-out.
Appologies, I was posting without properly referencing the post I was replying to.
I was relpying to crypticalpha's post, regarding composite to VGA converters. My converter box requires a powersupply in order to output a picture on the monitor/projector, else you can only get sound.
Since I have not yet held my TP2 in my hands, nor owned the TP1, I cannot comment on its TV out functionality.
I had assumed the phone itself would not be required to be connected to a power source, but it is actually good to hear that confirmed!
Kind Regards
BO$$
i think this one does work. and its cheap aswell
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=130310497614
I bought a HTC adaptor for charging & 3.5 headphones etc. Then I thought I'd be clever and save money and use a Nokia N95 TV out cable, but when I plug it in the TP2 sees it as Headphones.
Any ideas of how to get it working?
daveke0201 said:
i think this one does work. and its cheap aswell
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=130310497614
Click to expand...
Click to collapse
I can vouch for this being a good, cheap TV out cable; I bought it and it works well - the USB and 3.5mm jacks also work so you can plug a secondary sound source in or charge / sync it as well as using the TV out functionality.
One 'problem' though: using Core Player without the TV cable, the video playback is smooth as a baby's bum: with the TV out cable, it's slightly choppy. Is this to be expected or does anyone know how to improve video playback through TV cable? If so, it makes a great solution to travelling and being able to bring good TV and films with you on the phone!
Hey everyone, I've been having trouble connecting my Samsung Vibrant to my standard definition television, the cable I bought off Amazon was the Amzer 3.5 mm to rca video out cable, and no matter what I do, it doesn't seem to work. I've posted a quick video on youtube explaining my problem, and thanks for any help in advance:
-bobofosho123
I've only use the vid out once, when I first got the phone. I had to push the cable in very hard, there was the first initial click but to get video working I had to push again to get a second click. Also I don't recall the video out working on regular desktop/android screens, only videos from the Youtube app or the gallary app both images or vids. Note, Avatar will not play.
I very much doubt the cable is at fault. Do you have another TV you can test it on? Also you only have two RCA inputs on the front of the TV, is the audio mono? So you just have one vid in and one audio in? If that's the case then the yellow cable is your video in and either your white or red can be used for audio.
hope this helps.
either you dont have the cables plugged in all the way
or the cables broken
i have the same cable and it works flawlessly
Hey. I was wondering how the TV out works on the Vibrant. My last phone was a ipohne 3g and I used a programs called TV out to connect it to my car audio system. With that setup I was able to watch Slingplayer through the car audio display. When I check the TV out box on the Vibrant, I don't get video (just audio). I was told that video can be achieved through the 3.5mm headphone jack. I don't see how this is possible and I don't believe the mini usb is capable of audio/video. Can someone confirm this? Is there a way to utilize the slingplayer the same way as I did with the iphone?
Thanks in advance,
ScottZ0
You have to switch red with yellow or some sh¡t like that
V5 custom vibrant
ScottZ0 said:
Hey. I was wondering how the TV out works on the Vibrant. My last phone was a ipohne 3g and I used a programs called TV out to connect it to my car audio system. With that setup I was able to watch Slingplayer through the car audio display. When I check the TV out box on the Vibrant, I don't get video (just audio). I was told that video can be achieved through the 3.5mm headphone jack. I don't see how this is possible and I don't believe the mini usb is capable of audio/video. Can someone confirm this? Is there a way to utilize the slingplayer the same way as I did with the iphone?
Thanks in advance,
ScottZ0
Click to expand...
Click to collapse
I recently received my 3.5mm to rca plug from amazon for about $3 shipping included. Do you have the specific plug? I'm assuming you do since you said you used to do it with your iphone. Connect only 2 of the 3 rca plugs to the tv. Connect the white male plug for audio to the white female port and then connect the red male plug to the yellow female port for video (YES, YOU HEARD RIGHT. FOR SOME REASON THE RED MALE PLUG WORKS AS VIDEO INSTEAD OF AUDIO). Make sure your tv's input is set to VIDEO 1 or VIDEO 2 etc. Then make sure to check the tv out check box.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
The Vibrant's pretty picky about the cables. The correct cable is a standard Red/White/Yellow composite cable, but the wiring is non-standard, so you may have to switch the red and yellow connectors. Also, make sure the plug is plugged ALL THE WAY into the 3.5mm jack on the phone - it's easy to leave out one click. Even still, I've run into a couple cables that would not work no matter what I did (I think this is a grounding issue.)
I recommend the $3 cable from amazon. Took about 3 days for me to receive the cable. The cable was located in New Jersey and I live in Maryland.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
Motorola oem cable on ebay for about 5 bucks works correctly, yellow for video and red/white for audio.
ScottZ0 said:
Hey. I was wondering how the TV out works on the Vibrant. My last phone was a ipohne 3g and I used a programs called TV out to connect it to my car audio system. With that setup I was able to watch Slingplayer through the car audio display. When I check the TV out box on the Vibrant, I don't get video (just audio). I was told that video can be achieved through the 3.5mm headphone jack. I don't see how this is possible and I don't believe the mini usb is capable of audio/video. Can someone confirm this? Is there a way to utilize the slingplayer the same way as I did with the iphone?
Thanks in advance,
ScottZ0
Click to expand...
Click to collapse
Hey Scott,
Hope all is well with you - I too have a Vibrant - did you get the cabling figured out? What worked. Look forward to your reply. Thanks in advance - cheers
Does anyone or has anyone ever used the HDMI cable with their X2 and noticed lag when playing a movie on a tv? I'm trying to watch a 720p HD movie and its lagging on my LCD tv but looks just fine on the phone. I bought the cable with the phone when it first came out and honestly this is the first time i've actually used it.
I got cable from Amazon though it would
be cool to see on big screen.
I connected it once to my 23" LG LED monitor.
The thrill was short lived no lag, picture not
that Impressive. Now I have a $10 shoelace lol.
like video lagging behind the audio? jittery video? wtf do you mean by "lag"?
let's say you run HDMI from the phone to the TV and then plug audio from the headphone jack into a stereo receiver, your audio will be getting to your ears anywhere from 55ms to 500ms before the video hits the screen, that's kinda the nature of all these newfangled flatpanel HDTVs (especially LCDs) there is an inherent delay between the video signal going into the TV vs. when it is actually displayed on the panel.
here's a good test for your TV's "lag" get one of those cheap battery operated atari games (the ones built into a joystick w/ the yellow red and white cables coming out) hook that up to your TV, you'll IMMEDIATELY notice the amount of latency present in your TV.
I think this is probably one case where the phone is not the problem, it's your TV. you can go into the TV's setup menu and look for a "game mode" which basically bypasses extra picture features and filters that for the most part make your picture look like crap.
but, you really need to define what you mean by "lag" 'cause I could be way off in left field here, but mine looks just fine on my panasonic plasma or my samsung LCD monitor when I use an HDMI to DVI adapter, and I've plugged it into all kinds of other displays (I use it as an HDMI signal generator almost everyday at work) granted I rarely watch video on it using the other displays (usually test patterns for projector alignment and calibrating video walls) but whenever I'm in a hotel with a TV that has HDMI, I use it, and it works just as good as my computer does. (but I do always set the TV up properly)
oh, and if you have any of that 120hz/240hz smoothmotion garbage enabled on your TV, turn that crap off.
I have the same problem!
But I have got another mobile i9105p, I know isn't the correct site, but, when I plug my MHL to the TV, the image shows a bit of DELAY, and when I run an application, is more like 500ms to 600ms...
I don't know if the problem is the mobile Broadcom Video core IV, or the MHL adaptar I bought from china.
Greetings.
This may be such an unusual use case that it hasn't been an issue for anyone other than me, but here's to hoping for a solution...
I've just bought a new car (2015 Honda Fit) which has a decent size LCD panel in the dash (but I opted not to get the expensive navigation system) and which also has full bluetooth integration and, surprisingly, an HDMI port for the screen. HDMI is one of the "source" settings, and Bluetooth is a separate one.
I've paired my Nexus 5 to the car in order to take and make phone calls and get the other integration features such as music and podcast playback over the car's audio. I had this idea that if I were to run the Nexus 5 through the large screen using HDMI (via a Slimport adapter), I can have a much nicer Google Maps based navigation system that would give something close enough to the experience of the in-dash nav system minus the touchscreen -- which is fine, as I can set the route, put the phone in a cupholder, and not bother with it again.
Now, here's the fatal snag. While the phone is paired to bluetooth, it insists on sending 100% of its audio through Bluetooth and doesn't send it through HDMI. The car is either-or on the sources. If it's on HDMI, it only plays back HDMI. The screen displays exactly as I hoped -- but no audio at all (again, it's going to Bluetooth). Now, I can switch over to Bluetooth and hear the sound but not get the display. I could kill the pairing to get both through HDMI, but now I lose the ability to receive calls over bluetooth with the handy steering wheel call answering and all of the amenities associated with that.
I'm wondering if there is some kind of workaround -- Android configuration that I've somehow never noticed, or a third party app -- which will allow the Nexus 5 to remain paired and actively Bluetooth connected while still sending audio through the HDMI port (Slimport). I don't see that this would as likely be a car-side solution.
The Nexus 5 is rooted stock 4.3.3.
Thank you in advance for help toward a solution.
qaelith.2112 said:
This may be such an unusual use case that it hasn't been an issue for anyone other than me, but here's to hoping for a solution...
I've just bought a new car (2015 Honda Fit) which has a decent size LCD panel in the dash (but I opted not to get the expensive navigation system) and which also has full bluetooth integration and, surprisingly, an HDMI port for the screen. HDMI is one of the "source" settings, and Bluetooth is a separate one.
I've paired my Nexus 5 to the car in order to take and make phone calls and get the other integration features such as music and podcast playback over the car's audio. I had this idea that if I were to run the Nexus 5 through the large screen using HDMI (via a Slimport adapter), I can have a much nicer Google Maps based navigation system that would give something close enough to the experience of the in-dash nav system minus the touchscreen -- which is fine, as I can set the route, put the phone in a cupholder, and not bother with it again.
Now, here's the fatal snag. While the phone is paired to bluetooth, it insists on sending 100% of its audio through Bluetooth and doesn't send it through HDMI. The car is either-or on the sources. If it's on HDMI, it only plays back HDMI. The screen displays exactly as I hoped -- but no audio at all (again, it's going to Bluetooth). Now, I can switch over to Bluetooth and hear the sound but not get the display. I could kill the pairing to get both through HDMI, but now I lose the ability to receive calls over bluetooth with the handy steering wheel call answering and all of the amenities associated with that.
I'm wondering if there is some kind of workaround -- Android configuration that I've somehow never noticed, or a third party app -- which will allow the Nexus 5 to remain paired and actively Bluetooth connected while still sending audio through the HDMI port (Slimport). I don't see that this would as likely be a car-side solution.
The Nexus 5 is rooted stock 4.3.3.
Thank you in advance for help toward a solution.
Click to expand...
Click to collapse
I can't help ith your situation, but I'm wondering if you can help with mine. I also just bought the 2015 Honda Fit. What I want to be able to do is mirror my Galaxy S4 to the screen for navigation purposes. But from what I understand, it will only work in Park. I don't have the cable yet and did't want to buy it unless I knew it would work.
For a quick test, I plugged a roku stick in the HDMI port. As expected, it worked fine until I put the car in gear. Then the display gets disabled. Does this happen with phone mirroring? Would I be able to actually use google maps and see it while in motion or will the screen shut off? What does and doesnt work with mirroring?
samseed101 said:
I can't help ith your situation, but I'm wondering if you can help with mine. I also just bought the 2015 Honda Fit. What I want to be able to do is mirror my Galaxy S4 to the screen for navigation purposes. But from what I understand, it will only work in Park. I don't have the cable yet and did't want to buy it unless I knew it would work.
For a quick test, I plugged a roku stick in the HDMI port. As expected, it worked fine until I put the car in gear. Then the display gets disabled. Does this happen with phone mirroring? Would I be able to actually use google maps and see it while in motion or will the screen shut off? What does and doesnt work with mirroring?
Click to expand...
Click to collapse
This behavior of the HDMI port / display actually became a far bigger problem than how to route the sound. I had been doing all of my testing with the car sitting in the garage, and because I wasn't ever able to get the sound to do what I needed, I didn't bother to go drive around with HDMI display enabled. I confirmed through this and consulting the manual that for "safety reasons" they have entirely disabled the HDMI input while the car is not in park. Unfortunately, I'd guess this is coded in the system's firmware which most of us aren't going to have a way to tamper with, so this is a fatal problem for what we're both looking to do. I was confident that there was probably some sort of solution to making audio go over both channels, but that's irrelevant in light of this problem.
So to summarize, I'll suggest not bothering with the Slimport (or the other kind of interface, if that's what your phone uses) because it will certainly be utterly useless for this and I don't foresee a solution. It looks like this thread is therefore dead. Thank you for bringing this to my attention, though -- I'd have continued working toward an audio solution and then discovered this bigger problem once I solved that one. You just saved me from wasting a lot of time.
samseed101 said:
I can't help ith your situation, but I'm wondering if you can help with mine. I also just bought the 2015 Honda Fit. What I want to be able to do is mirror my Galaxy S4 to the screen for navigation purposes. But from what I understand, it will only work in Park. I don't have the cable yet and did't want to buy it unless I knew it would work.
For a quick test, I plugged a roku stick in the HDMI port. As expected, it worked fine until I put the car in gear. Then the display gets disabled. Does this happen with phone mirroring? Would I be able to actually use google maps and see it while in motion or will the screen shut off? What does and doesnt work with mirroring?
Click to expand...
Click to collapse
One more thought (stating the obvious, I suppose) -- We've been hamstrung by the assumption that everyone is going to be using the display to watch movies while driving, even though we have excellent reasons which would actually make it safer (an easier to see navigation display). I guess Honda is mitigating lawsuits from the would-be idiots who might actually be watching American Idol episodes while driving to work.