Related
I have flashed both AOKP and Nightly ICS ROM and both of them, I can't access my external SD card, only internal SD card.
I went from stock 2.3.4, flashed zerg rush kernel or w/e to get CMW so that I can flash the ICS roms, and when I got it, everything works fine except for the external card and its really annoying me. Any help would be nice.
Did you look in the right place? AOKP external is located /mnt/emmc
http://forum.xda-developers.com/showthread.php?p=24602879#post24602879
gsrrr said:
Did you look in the right place? AOKP external is located /mnt/emmc
http://forum.xda-developers.com/showthread.php?p=24602879#post24602879
Click to expand...
Click to collapse
but what if i want to transfer things from my computer? and thanks a lot homie!
pham818 said:
but what if i want to transfer things from my computer? and thanks a lot homie!
Click to expand...
Click to collapse
plug it into the computer.....it shows up as an SGH-i777, MTP Device, both cards are there....
Pirateghost said:
plug it into the computer.....it shows up as an SGH-i777, MTP Device, both cards are there....
Click to expand...
Click to collapse
PG, which build of AOKP are you on? The latest builds default on USB Storage. I can't figure out how to turn on MTP in b30 or b31.
TASL said:
PG, which build of AOKP are you on? The latest builds default on USB Storage. I can't figure out how to turn on MTP in b30 or b31.
Click to expand...
Click to collapse
build 31.
i just plugged it into my work computer....MTP device...just like it always has been for me
Pirateghost said:
build 31.
i just plugged it into my work computer....MTP device...just like it always has been for me
Click to expand...
Click to collapse
Thank you for replying. Have you been doing full wipes between builds? Or just dalvik/cache?
I did a full wipe for b31 and upon booting up and connecting to my comp it came up with the USB Mass Storage page. Thinking maybe I need to go back a few revisions and then flash w/o data wipe until current?
I don't fully wipe unless I am changing major versions. Or if I need to troubleshoot something
Sent from my SGH-I777
Pirateghost said:
I don't fully wipe unless I am changing major versions. Or if I need to troubleshoot something
Sent from my SGH-I777
Click to expand...
Click to collapse
Hmmm, well that was a no-go for me. Went back to 4-2 and flashed incrementally - 4-3, 4-4, 4-7, 4-8, b31. 4-3 had the different wallpapers and MTP/Camera option menu option under "Storage," which changes in the 4-7 build to stock wallpapers, USB Storage, and no menu option under "Storage."
Also tried going from 4-3 straight to b31, same result. Not sure what I am doing differently that is removing the "Storage" menu. avidmovies pointed me to a UMS apk which does the job... just the visual annoyance of two USB icons when on computer.
TASL said:
Hmmm, well that was a no-go for me. Went back to 4-2 and flashed incrementally - 4-3, 4-4, 4-7, 4-8, b31. 4-3 had the different wallpapers and MTP/Camera option menu option under "Storage," which changes in the 4-7 build to stock wallpapers, USB Storage, and no menu option under "Storage."
Also tried going from 4-3 straight to b31, same result. Not sure what I am doing differently that is removing the "Storage" menu. avidmovies pointed me to a UMS apk which does the job... just the visual annoyance of two USB icons when on computer.
Click to expand...
Click to collapse
yeah it only shows up the internal SD card on my computer, not the external. and anyone know where i can get the "different wallpapers" from 4-3, i really like one of them.
can you link me to the UMS APK? thanks. i found "USB Mass storage watcher OTG" in the market but its just force closes.
P.S. my two SD cards were working fine on 4-7 so idk what happened.
http://forum.xda-developers.com/showthread.php?p=24602879#post24602879
Should be in the first part of the faq post. End up with 2 USB icons, but it works for me until it gets fixed. I pulled apart the trebuchet and framework apks looking for the wallpapers, no luck. Not sure where else to look.
Mine only flashes one box when hooked up to windoze7 but when you click on "open device to view files", both cards show up.
Now that CM10 has been released for the NT I have started up a proper support thread. Pleas keep it as back reports and help.
Please use this thread to post feedback and to ask questions. The Dev thread is for exactly that, development and not support! Please keep the development thread clear of support and feedback posts.
Live support may be available on irc.freenode.net irc channel #nook-tablet, if any of us are around we'll be happy to help but don't bug people if they are busy please. A web version of irc is available here http://webchat.freenode.net?channels=nook-tablet-chat
When posting a bug or issue please use the following format
----------Which install are you using (Internal or SD):
----------What version is your CM10 download that you are using (should be alpha final now):
----------Do you have any mods on your NT (updates or system modifications)
----------If yes to above what have you installed
----------Where is this bug (main system or which application):
----------Can this bug be easily replicated:
----------If yes to above how can we replicate it to check:
----------Description of the bug
----------Any other information we may find useful
(thank CelticWebSolutions for the text)
I would like to run CM10 from an sdcatd. I get lost following the directions iamafanof has on his blog. Does anyone have something clearer?
I just want to boot 10 from sd ,like CM 7 was.
Thanks.
Bill
Just use the same directions used in succulent's (iamafanof) directions on how to boot CM7/CM9 from sdcard. The only thing different is to use his CM10 boot from sdcard zip.
CM10 Install Assist?
UPDATED NEAR END - I am with you miniblue... I have been running an SD version of CM7 for sometime now and absolutely love it. However, would like to upgrade to CM10 and tried using imafanof's SD boot install but somehow I messed it up so now I am running some sort of hybrid of the Nook (still has original apps installed) and CM10. So now I have the nice polished look with none of the functionality.
If someone can help me with some tips as to how to flash and start fresh with a fresh install of CM10 I would be very grateful. Now I have a nook that boots up with cyanboot bootloader but loads a hybrid of CM10 and the nook truncated Android. Now I have the Nook purchased apps (don't care to have) and no ability to do much with the Jelly Bean other than having the nice polished look.
According to the Nook, I am running Android version 4.1.1, Kernel version 3.0.31+ ([email protected] #1), Cyanmod version 10-20120903-UNOFFICIAL-acclaim. Also - My Nook seems to now think it is a 8GB nook instead of the 16GB Nook that it really is. I have the new look but all the B&N apps and no functionality beyond that to speak of. Cannot change themes, etc.
So, I made a good bootable SD card to load emmc CM10. Installed it but still have the weird hybrid version of the Nook software on it. Do I need to format the emmc or something first? I followed the instructions as indicated by chrmhoffmann on this page: http://forum.xda-developers.com/showthread.php?t=1773362 - where it says this method will overwrite everything. What am I missing?
update: so I was able to use a CWM bootable SD and formatted emmc, user data, etc. Looks like CM10 is running exclusively. Trouble is, as can be expected, it is unstable and so it goes to black screen a lot, particularly when surfing/on wifi. May have to try CM9 for awhile until 10 gets to a bit better performance.
jelly bean sd card not mounting
Hi all,
I just flashed the jellybean rom, and everything is working smoothly. However, when i connect it to my computer. The sd card is not mounting. all i have access to is 1gb on my nook tablet.....
Any help?
Jelly Bean
hensley1971 said:
Hi all,
I just flashed the jellybean rom, and everything is working smoothly. However, when i connect it to my computer. The sd card is not mounting. all i have access to is 1gb on my nook tablet.....
Any help?
Click to expand...
Click to collapse
Not sure what to tell you but I used the SGT7 Jelly Bean ROM and I am not having that issue and the ROM is working great for me on emmc. Still getting some black outs on occasion but not too big of a deal.
8gb nook
does it work on 8gb nook tablet?
CM10 Jelly Bean on NT8 & Root BN 1.4.3
arcane76 said:
does it work on 8gb nook tablet?
Click to expand...
Click to collapse
Yes. It works fine. As everyone is aware, there are some Black Screen Of Death (BSOD) issues and a few random reboots but not to the point of a MAJOR issue.
I have posted my simple guide to installing the SGT7 (Meghd00t) ROM on my website here: http://raywaldo.com/2012/09/root-for-nook-tablet-1-4-3/ - includes video and my process worked to root & install on a stock Nook Tablet (8GB) running B&N v.1.4.3.
Thanks - - and USB disk issues.
raywaldo said:
Yes. It works fine. As everyone is aware, there are some Black Screen Of Death (BSOD) issues and a few random reboots but not to the point of a MAJOR issue.
I have posted my simple guide to installing the SGT7 (Meghd00t) ROM on my website here: http://raywaldo.com/2012/09/root-for-nook-tablet-1-4-3/ - includes video and my process worked to root & install on a stock Nook Tablet (8GB) running B&N v.1.4.3.
Click to expand...
Click to collapse
This is awesome. I'd been thinking about doing a full restore - re-root - install w/ CM10, and it's nice to have a method to follow.
BTW - Ray, (or anybody) have you heard of anyone having problems getting their PCs to recognize their Nooks as USB drives on CM10? It's seems like after a time my PC first stops recognizing the external SD (shows a mounted drive icon but shows no information or says 'please insert an SD card") . . . then eventually stops recognizing the internal "My Nook" drive as well. At one point I did a complete USB driver uninstall-reinstall using USBdeview, and it fixed the problem but only for a day. And it did not work the second time.
I know this is NT related because it happens on any PC I use. The problem is not present when using CM7.
Ideas?
I love sgt7! Can you thank too many times on xda?
I am new here though and I have a few questions. Has anyone been able to reproduce the sleep of death bug ? Or is it completely random? I have done some minimal Linux and android development and I would love to help with improving jelly on nt. I actually have two nook tab 16s. One is running sgt7 9.13 the other 9.14. I know I haven't searched as much as I could have just yet but I wanted to see if anyone would recommend some things I could do for the devs. Can we get a trace from adb when the bug occurs or do we lose the connection immediately before? Do we know where in the libs or kernel the bug may be lurking?
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
CM10 USB Drive
timpilcher said:
This is awesome. I'd been thinking about doing a full restore - re-root - install w/ CM10, and it's nice to have a method to follow.
BTW - Ray, (or anybody) have you heard of anyone having problems getting their PCs to recognize their Nooks as USB drives on CM10? It's seems like after a time my PC first stops recognizing the external SD (shows a mounted drive icon but shows no information or says 'please insert an SD card") . . . then eventually stops recognizing the internal "My Nook" drive as well. At one point I did a complete USB driver uninstall-reinstall using USBdeview, and it fixed the problem but only for a day. And it did not work the second time.
I know this is NT related because it happens on any PC I use. The problem is not present when using CM7.
Ideas?
Click to expand...
Click to collapse
Not sure which CM10 you have. I am running the SGT7/Meghd00t and it works fine for me.
One thing that you probably already know.. When you connect, Windows will beep but may not display the file manager window.
If you have USB Debugging enabled, then you have to switch to mass storage mode. In the notifications area, you will have a little USB symbol. Click on it and follow the prompts to enable the Mass Storage mode.
Another note. I have Win7/64bit so it may be relative to that. But sometimes SDCard readers, etc have trouble with my USB 3.0 ports and I have to use them on the 2.0 port instead.
Thanks Ray!
Ray, just wanted to give you props for your tutorials. They are very thorough and explain things in great detail for those who are new but want to benefit from the greatness of ROMs and rooting.
/\/(_)777233 said:
Ray, just wanted to give you props for your tutorials. They are very thorough and explain things in great detail for those who are new but want to benefit from the greatness of ROMs and rooting.
Click to expand...
Click to collapse
Agreed. Now why didn't you hit his thanks button?
Odd
timpilcher said:
This is awesome. I'd been thinking about doing a full restore - re-root - install w/ CM10, and it's nice to have a method to follow.
BTW - Ray, (or anybody) have you heard of anyone having problems getting their PCs to recognize their Nooks as USB drives on CM10? It's seems like after a time my PC first stops recognizing the external SD (shows a mounted drive icon but shows no information or says 'please insert an SD card") . . . then eventually stops recognizing the internal "My Nook" drive as well. At one point I did a complete USB driver uninstall-reinstall using USBdeview, and it fixed the problem but only for a day. And it did not work the second time.
I know this is NT related because it happens on any PC I use. The problem is not present when using CM7.
Ideas?
Click to expand...
Click to collapse
That is odd. Mine hooks up and works great via USB. I am running CM10 SGT7.
/\/(_)777233 said:
That is odd. Mine hooks up and works great via USB. I am running CM10 SGT7.
Click to expand...
Click to collapse
I have to turn it off then let it boot up when usb is plugged into computer. Only way for me to have it recognise.
Sent from my ADR6300 using xda premium
I have been using cm10 for a while and LOVE it. However, the battery life is so terrible that it's unusable at the moment. I want to install cm7 instead until the battery life improves for this rom, but when trying to install it, it doesn't actually work (cm10 still boots up). Is there a specific process I need to follow to achieve this? Thanks.
mattman1983 said:
I have been using cm10 for a while and LOVE it. However, the battery life is so terrible that it's unusable at the moment. I want to install cm7 instead until the battery life improves for this rom, but when trying to install it, it doesn't actually work (cm10 still boots up). Is there a specific process I need to follow to achieve this? Thanks.
Click to expand...
Click to collapse
Provide more details. Does it go through the install process? Any errors? Does the cm7 install appear to complete too quickly? Are you using twrp or cwm? Have you wiped cache and data then tried installing 7?
SlowCobra96 said:
Provide more details. Does it go through the install process? Any errors? Does the cm7 install appear to complete too quickly? Are you using twrp or cwm? Have you wiped cache and data then tried installing 7?
Click to expand...
Click to collapse
Sorry for the lack of details. I'm using TWRP, trying to install the CM7 beta. I have wiped cache and data before flashing, as I always do. But yeah, the install seemed to complete suspiciously quickly, like 5 or 10 seconds. It does say that it completes successfully, however, with no errors.
Sent from my EVO using xda app-developers app
mattman1983 said:
I have been using cm10 for a while and LOVE it. However, the battery life is so terrible that it's unusable at the moment. I want to install cm7 instead until the battery life improves for this rom, but when trying to install it, it doesn't actually work (cm10 still boots up). Is there a specific process I need to follow to achieve this? Thanks.
Click to expand...
Click to collapse
I've had similar issues and I found in another thread that powering off and powering on the device enables Deep Sleep which helps immensely with battery life. The key seems to be remembering to do this after a SOD.
You have to do a complete power off/power on cycle, rebooting doesn't seem to work.
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
LifeWOutMilk said:
I've had similar issues and I found in another thread that powering off and powering on the device enables Deep Sleep which helps immensely with battery life. The key seems to be remembering to do this after a SOD.
You have to do a complete power off/power on cycle, rebooting doesn't seem to work.
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'll give the power off/on cycle a chance (since I'm still using cm10 'til I get cm7 to work), and see if that helps.
Hey Guys!
Prologue
I have a complex problem with my beloved Vibrant. First of all, I got it for Christmas a year ago. It had no issues, with a stock 2.1 (and after a kies update 2.2) firmware, it was fun for a first droid. After digging myself into the world of droids, I decided to root my baby, and put CM on it. It was about a month ago; I saw that there is a stable cm10 for the Vibrant. There were minor problems (could not exit cm recovery and boot the phone normally) with doing it, but at the end, it worked flawlessly.
Problems
Unfortunately, a few days ago, my phone started to have problems like "Trebuchet stopped working" and similar error messages appeared on screen. Yesterday my Vibrant stopped working. The only thing it could do was when I turned on, it showed cm recovery. I chose to reboot the phone, but again, recovery mode came up.
- Now, I use a stock 2.2 (Eugene's) but with this, I cant really use my Vibrant, except for calls and sms.
- Odin cant see my phone.
- I cant revert it to normal stock firmware
- When trying to put a cm10 to it, reboots into recovery it says: cant mount dev/block/mmcblk0p1
What I did
First of all, a lot of research. Really, a lot, but I suppose not enough, because I cant repair my phone.
- I tried to revert to stock (using AIO Vibrant toolbox). I put Cmenard's kernel (with cm recovery, as described in the official cm wiki howto) onto the phone, since then Odin cant see my phone.
- I have Heimdall, adb shell installed on windows, so tried some lines to revert the Vibrant to normal, no success
- Rooted with superoneclick, so I have root, and su.
Summary
My suspicion is that the internal SD card is corrupted. Anyhow, I tried to use parted, but cannot format my internal SD card. I found solutions that may help, but unfortunately I have no exterior SD card, to make those steps.
Any help would be highly appreciated, as I am starting to lose my mind, and I do not really have a backup phone (will definitely buy in January).
In the top of that, today is my birthday.
Greetings to all,
Dan
Wierd, does ur phone go into download at all? have u tried heimdall on ubuntu?
Pauler1 said:
Wierd, does ur phone go into download at all? have u tried heimdall on ubuntu?
Click to expand...
Click to collapse
Yes, download mode is ok, 2 volume buttons pressed, then plug in the usb cable. Before the new kernel was put on, I used the same method and eg was okay with Odin, thats how I put on Eugene's mod as well.
No, (unfortunately) I use windows 7. Or do you mean, I should use ubuntu?
mobildeck said:
- When trying to put a cm10 to it, reboots into recovery it says: cant mount dev/block/mmcblk0p1
...
Summary
My suspicion is that the internal SD card is corrupted. Anyhow, I tried to use parted, but cannot format my internal SD card. I found solutions that may help, but unfortunately I have no exterior SD card, to make those steps.
...
On the top of that, today is my birthday.
Greetings to all,
Dan
Click to expand...
Click to collapse
First and foremost, happy belated birthday. It's a shame this had to happen on your birthday... Especially since I have some rather bad news. In your post--which, by the way, was very well written--you mentioned getting the error "cant mount dev/block/mmcblk0p1" while in recovery. This is a pretty bad sign. More than likely, one of two things happened. Either you obtained the Encryption Unsuccessful bug or your internal SD card outright crashed. Either way you're going to need to purchase an external SD card if you wish to continue using your phone. No way around it bud, sorry.
I had the EU bug hit my device a month or two ago, and had to purchase an external SD card as a result. After partitioning the new SD card and tweaking the phone to run off of it, my phone runs great... But switching back to stock/installing a new ROM can be a tricky process...
Good luck. If you have any questions don't hesitate to ask.
Oh, and this guide should be able to help: http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my SGH-T959
mobildeck said:
Yes, download mode is ok, 2 volume buttons pressed, then plug in the usb cable. Before the new kernel was put on, I used the same method and eg was okay with Odin, thats how I put on Eugene's mod as well.
No, (unfortunately) I use windows 7. Or do you mean, I should use ubuntu?
Click to expand...
Click to collapse
Yes, I meant use ubuntu, but N00B in N33D i think has the right answer, i overlooked the "can't mount" part of the post. Sorry about all of that happening on your birthday:/
N00B_IN_N33D said:
First and foremost, happy belated birthday. It's a shame this had to happen on your birthday... Especially since I have some rather bad news. In your post--which, by the way, was very well written--you mentioned getting the error "cant mount dev/block/mmcblk0p1" while in recovery. This is a pretty bad sign. More than likely, one of two things happened. Either you obtained the Encryption Unsuccessful bug or your internal SD card outright crashed. Either way you're going to need to purchase an external SD card if you wish to continue using your phone. No way around it bud, sorry.
I had the EU bug hit my device a month or two ago, and had to purchase an external SD card as a result. After partitioning the new SD card and tweaking the phone to run off of it, my phone runs great... But switching back to stock/installing a new ROM can be a tricky process...
Good luck. If you have any questions don't hesitate to ask.
Oh, and this guide should be able to help: http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my SGH-T959
Click to expand...
Click to collapse
Thank you very much for the answer and the kind words. I will get an SD card then, I will need it later on anyway I guess. I will try this method you linked, and going to post about what happened (but not in the near future, Christmas is coming).
Good news, your phone runs great now after those things, it means I have a little chance at least. :fingers-crossed:
Thanks again, the best wishes for the holiday season!
Pauler1 said:
Yes, I meant use ubuntu, but N00B in N33D i think has the right answer, i overlooked the "can't mount" part of the post. Sorry about all of that happening on your birthday:/
Click to expand...
Click to collapse
Thanks! Yeah I was kind of disappointed, but maybe I can sort it out.
Okay, thanks again, and the best wishes to you as well!
Hey Guys.
Lately, I bought an sd card (class10, 16GB) and tried to breathe life into my Vibrant. Used this method (except the fact, that I used cm10):
http://forum.xda-developers.com/showthread.php?t=1665123
Actually this worked.
Before that, I figured out, that Odin couldn't see my device because of some driver errors Heimdall caused. (Or Heimdall/zadig installed some other drivers, to be more precise.)
So after reinstalling those drivers from Vibrant AIO Toolbox, I used that method.
But.
The final step, where you edit the vold.stab file, those two lines are swapped for me. Anyhow I tried to edit both ways (as written originally in the post, and tried to swap the lines) but unfortunately after editing, saving the file, and rebooting, the phone just stays at the animated cyanogenmod logo. Nothing happens. Really, I waited an hour or so, still nothing. Tried to reinstall everything, clear cache, dalvik, then phone reboots again normally to cm10, but as mentioned in the post, camera does not work.
Any thoughts would be helpful here.
EDIT:
That post says it should be this after editing:
#internal sdcard
dev_mount emmc /mnt/sdcard 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
#external sdcard
dev_mount sdcard /mnt/emmc auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
and my file contains this originally:
# internal sdcard
dev_mount emmc /storage/sdcard1 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
# external sdcard
dev_mount sdcard /storage/sdcard0 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
So it would be great to edit these two lines correctly.
Bump. Any help would be appreciated.
This is the last and only problem with my phone, and it doesn't look like it's an unbeatable problem.
There is a different syntax for Jellybean roms. See here
floating_flower said:
There is a different syntax for Jellybean roms. See here
Click to expand...
Click to collapse
Thank you very much! Wow, this worked like a charm! One zillion thanks!
Hopefully this thread will help out many Vibrant users experiencing problems like this one was. Thank you all once again.
Hi guys.
Since then, I have flashed the CyanAOSP 2.9.0 ROM into my beloved vibrant, new kernel (gearkernel universal 1.1.2) and everything works fine, 4.4 is flawless in this device as well,
however
I am now facing some problems again, as the system cannot access the sdcard part, so with rootbrowser I can edit files and anything else, but camera, music player and gallery is not working.
I am thinking of a vold.fstab editing, but as 4.4 has this no more, I am stuck at this point. Any ideas of how and what to edit? Tried build.prop, no success so far. In CWM I can see that the sdcard is not mounted. Mounting it also did not help either.
Edit: I would think, editing the fstab.aries would be the key in this process, but I cannot really tell which part needs to be edited.
Hello once again,
This Rom is based on latest Nook Tablet CM10.1 Branch courtesy of our great developers aka Kuzma,Chris,Rebellos etc.
It has SGT7 modifications taken from https://github.com/sgt7 plus cherry picks from https://github.com/loosethisskin.
Links:
Updated Rom 28/03/13:
http://goo.im/devs/meghd00t/sgt7/sgt7_10.1-20130328-acclaim-meghd00t.zip
Previous Roms:
http://goo.im/devs/meghd00t/sgt7/sgt7-10.1-20130224-0601-acclaim-meghd00t.zip
http://goo.im/devs/meghd00t/sgt7/sgt7-10.1-20130131-0219-acclaim-meghd00t.zip
Gapps:
http://goo.im/gapps/gapps-jb-20130301-signed.zip
New recoveries with sgdisk tool implemented:
TWRP V2.4.0
http://celticstorage.co.uk/cm10/TWRP_v2.4.0_sgdisk_emmc.zip
CWM V6.2.7
http://celticstorage.co.uk/cm10/CWM_v6.2.7_sgdisk_emmc.zip
Rom+Gapps+Recovery flash Instructions:
1.Copy rom(zip) file and gapps (zip) and twrp/cwm recovery package onto internal/external sdcard
2.Reboot Nook Tablet and access Recovery.
3.Flash recovery package(optional) then Select from recovery to reboot to recovery once more so you flash rom and gapps with updated recovery!
4.Factory wipe, wipe cache.
5.Flash Rom then flash Gapps.
6.Select from recovery to reboot Nook Tablet
As always,
Enjoy your Nook
Known Issues:
After 4 touches, touch driver freaks out
Epic Citadel ( Unreal Engine 3) FC on touch.
Notified Mik_os about them (something went wrong from 4.1.2 ->4.2.2)hopefully we will see them squashed when and if he finds time....
Reserved for happyness. Thank you sooo much!
Thank you! im downloading right now :fingers-crossed:
Thanks Demetris.
Couple of 1st impressions:
1) The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
2) I really liked the large status bar icons in your CM10 rom as they are easier on the eyes. Is there any way to make the icons (clock, battery, etc) larger in this rom?
larrycl said:
1) The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
Click to expand...
Click to collapse
Agreed - same thing happens with my install of it.
The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
Click to expand...
Click to collapse
All data is defaulted to internal sdcard by design and imo this is the correct way and if you search around you will find that when otherway around when there isnt one ext-sdcard in the nook the mounting has bugs.
How to add and remove tablet quick setting, I can't find the option for it, the rom only allow me edit the default JB tiles and layouts
Because the sdcard was mounted as internal storage, so all data and installed apps will disappeared. How to reversed it without reinstall again.
I currently have your other ROM installed (SGT7+CM10+Cherry Picks), can I update to this new one without a full wipe? And also will the sdcard switched to internal storage mess up the currently installed apps like the previous posters have mentioned?
Trism said:
I currently have your other ROM installed (SGT7+CM10+Cherry Picks), can I update to this new one without a full wipe? And also will the sdcard switched to internal storage mess up the currently installed apps like the previous posters have mentioned?
Click to expand...
Click to collapse
1.No
2.Yes
How to enable ADB debug? Can't find the option.
qingz said:
How to enable ADB debug? Can't find the option.
Click to expand...
Click to collapse
Go to Settings... About Phone... Click on the "Build Number" item 7 times to enable the Development Settings option.
Re: [ROM]{WIP} SGT7+CM10.1+Cherry Picks,By meghd00t. 31/01/13
It is under development options, which may not be enabled.
To enable it go to about tablet and tap build number 7 times (from memory) I think.
It has been hidden by default for some reason.
Sent from my NookTablet using xda premium
I'm having deep sleep / battery problems with this rom.
I turn off the wifi at night before going to bed. Even with wifi off, it drained substantially overnight.
c600g said:
Go to Settings... About Phone... Click on the "Build Number" item 7 times to enable the Development Settings option.
Click to expand...
Click to collapse
rorymc928 said:
It is under development options, which may not be enabled.
To enable it go to about tablet and tap build number 7 times (from memory) I think.
It has been hidden by default for some reason.
Sent from my NookTablet using xda premium
Click to expand...
Click to collapse
That's tricky!
Thanks!
The EMMC/SD swap has made it so that games and other things that require the SD space will not install.
EDIT: Yeah, the apps themselves will install to "internal", but wish to store their massive obb data on the SD card which now only reads as 1GB.
flippage said:
The EMMC/SD swap has made it so that games and other things that require the SD space will not install.
EDIT: Yeah, the apps themselves will install to "internal", but wish to store their massive obb data on the SD card which now only reads as 1GB.
Click to expand...
Click to collapse
You obviously need to repartition your nook.
Runs beautifully for me. Just to let you know, if you drain it to 0 and it turns off, and your nook cable has broken (as they easily do), it will take ALL NIGHT for it to turn back on with trickle charge. I plugged it into a cell phone charger, which didn't work at all, but then used a cable for external 2.5" hard drives, the type that has two usb plugs, one for power and the other for power and data, and left it overnight.
THAT worked. Just sayin'
But this seems to be the case with the slow charging (whether Nook cable or regular usb) with ALL of the 4.2 roms that I have tried (even 4.1). Oh well. Not a problem for me, but just in case someone else has that problem.
On the other hand, I have not used a rom on the nook yet which I like better or has been more stable for me than this one. Good job demetris!
demetris_I said:
You obviously need to repartition your nook.
Click to expand...
Click to collapse
Sorry, it wasn't as obvious to me because it was never an issue with any other rom that was ever released. ever. Thanks for your help. I do enjoy your mods and the time you put into it.
Far and away my favorite ROM. There's nothing out there that's as stable for me as the SGT/Cherry Pick ROM.
Re: [ROM]{WIP} SGT7+CM10.1+Cherry Picks,By meghd00t. 31/01/13
Meghd00t- will you be updating based on kuzmas 2/06 release? I ask because I saw you released a kernel in that thread, and I was wondering if it should be flashed over this ROM, etc. I prefer to stay with your versions as they are always speedier for me. I have noticed, I am again experiencing that when plugging in to charge, I have to turn on the screen until it says or shows charging, though this is a very minor issue. Thanks again!
Sent from my NookTablet using xda app-developers app
First few things: I don't know if I'm supposed to be posting this here, idk if the problem is device specific or not... Sorry if I've done anything wrong. I've searched already, can't find any similar threads that actually help. I have the international version. I was running the CM10.2 Rom prior to 'the accident'. I will pay for a resolution if need be - PM me.
There's a bit of a story to this so I'll go over it all - not sure what's relevant.
I've been running out of storage for days, a 64GB SD card is in the mail. I currently have an 8GB one as well as the internal 16GB, both of which were near full, but the external one had relatively more than the internal one, so I decided to use foldermount and link2SD to move some space over. That all went fairly well.
This morning I got invited to the Aviate Beta launcher, which looked interesting. Tried to install, didn't have enough space. So I decided to make a backup of Nova, go into the play store, uninstall nova to free up space and then install Aviate without leaving the playstore. It worked, turns out I don't like Aviate much, so I worked backwards. Uninstalled Aviate, went to install Nova. Not enough space (idk how). Uh oh.
So I deleted some less-necessary apps that I could reinstall later. Not enough storage. Notification comes up in the bar along the lines of "storage critically low, device may malfunction". Now whenever I attempted to enter settings, the process crashed. Great. Simple fix, flash a NANDroid back-up in CWM. I can't remember what the message was, but there was something wrong with the back-up.
Wiped everything and tried to flash CM10.2 from the external SD Card but it wouldn't mount. Data also wouldn't mount. I tried several SD Cards ( ie about 10, different brands, sizes, classes, etc out of hope). So I decided I'll open up and Odin and just re-do everything per /showthread.php?t=2387980.
Turn the phone back on, stock Jelly Bean lockscreen was there, and once unlocked only the notification bar was there (no launcher). So I used different versions of Odin, different cables, downloaded the image several times, etc etc. Nothing fixed it. In fact, it's worse now. after booting past the Samsung logo, the screen just goes black now. smh
Can anyone help? It would be extremely appreciated. It's also a time sensitive issue as I need the device for work on Monday.
Sorry if I've missed anything. Yes I'm a noob, but you great people at XDA have helped a lot of people out before so I'm hoping you can help me.
Thanks!