I have flashed both AOKP and Nightly ICS ROM and both of them, I can't access my external SD card, only internal SD card.
I went from stock 2.3.4, flashed zerg rush kernel or w/e to get CMW so that I can flash the ICS roms, and when I got it, everything works fine except for the external card and its really annoying me. Any help would be nice.
Did you look in the right place? AOKP external is located /mnt/emmc
http://forum.xda-developers.com/showthread.php?p=24602879#post24602879
gsrrr said:
Did you look in the right place? AOKP external is located /mnt/emmc
http://forum.xda-developers.com/showthread.php?p=24602879#post24602879
Click to expand...
Click to collapse
but what if i want to transfer things from my computer? and thanks a lot homie!
pham818 said:
but what if i want to transfer things from my computer? and thanks a lot homie!
Click to expand...
Click to collapse
plug it into the computer.....it shows up as an SGH-i777, MTP Device, both cards are there....
Pirateghost said:
plug it into the computer.....it shows up as an SGH-i777, MTP Device, both cards are there....
Click to expand...
Click to collapse
PG, which build of AOKP are you on? The latest builds default on USB Storage. I can't figure out how to turn on MTP in b30 or b31.
TASL said:
PG, which build of AOKP are you on? The latest builds default on USB Storage. I can't figure out how to turn on MTP in b30 or b31.
Click to expand...
Click to collapse
build 31.
i just plugged it into my work computer....MTP device...just like it always has been for me
Pirateghost said:
build 31.
i just plugged it into my work computer....MTP device...just like it always has been for me
Click to expand...
Click to collapse
Thank you for replying. Have you been doing full wipes between builds? Or just dalvik/cache?
I did a full wipe for b31 and upon booting up and connecting to my comp it came up with the USB Mass Storage page. Thinking maybe I need to go back a few revisions and then flash w/o data wipe until current?
I don't fully wipe unless I am changing major versions. Or if I need to troubleshoot something
Sent from my SGH-I777
Pirateghost said:
I don't fully wipe unless I am changing major versions. Or if I need to troubleshoot something
Sent from my SGH-I777
Click to expand...
Click to collapse
Hmmm, well that was a no-go for me. Went back to 4-2 and flashed incrementally - 4-3, 4-4, 4-7, 4-8, b31. 4-3 had the different wallpapers and MTP/Camera option menu option under "Storage," which changes in the 4-7 build to stock wallpapers, USB Storage, and no menu option under "Storage."
Also tried going from 4-3 straight to b31, same result. Not sure what I am doing differently that is removing the "Storage" menu. avidmovies pointed me to a UMS apk which does the job... just the visual annoyance of two USB icons when on computer.
TASL said:
Hmmm, well that was a no-go for me. Went back to 4-2 and flashed incrementally - 4-3, 4-4, 4-7, 4-8, b31. 4-3 had the different wallpapers and MTP/Camera option menu option under "Storage," which changes in the 4-7 build to stock wallpapers, USB Storage, and no menu option under "Storage."
Also tried going from 4-3 straight to b31, same result. Not sure what I am doing differently that is removing the "Storage" menu. avidmovies pointed me to a UMS apk which does the job... just the visual annoyance of two USB icons when on computer.
Click to expand...
Click to collapse
yeah it only shows up the internal SD card on my computer, not the external. and anyone know where i can get the "different wallpapers" from 4-3, i really like one of them.
can you link me to the UMS APK? thanks. i found "USB Mass storage watcher OTG" in the market but its just force closes.
P.S. my two SD cards were working fine on 4-7 so idk what happened.
http://forum.xda-developers.com/showthread.php?p=24602879#post24602879
Should be in the first part of the faq post. End up with 2 USB icons, but it works for me until it gets fixed. I pulled apart the trebuchet and framework apks looking for the wallpapers, no luck. Not sure where else to look.
Mine only flashes one box when hooked up to windoze7 but when you click on "open device to view files", both cards show up.
Related
I have new Viewsonic G Tablet. Just installed CM7 (I tried both BitTrix gingerbread beta 06 ROM and update-cm-7.0.0-Beta1-Harmony-signed.zip).
My problem is how to mount the tablet's internal memory via USB on my PC running Ubuntu 10.10.
Normally, a notification pops up on the device asking to mount the storage. This does not happen with either of the CM7 ROMs listed above. When i connect via USB, there isnt even any option in the drop-down to mount USB.
I tried a bunch of different things, but I couldn't figure out how to mount the storage -- except from the Clockwork Recovery menu.
What am I missing? Do I need to install an app? Which one? (I tried two different mounting apps from the market but they were crap. One just force closed, the other was a widget and wouldn't do anything.)
I had the same issue when I tried CM too, so I'm keen to know this too. Its really frustrating because its next to impossible to put things on the root of the drive without that. I actually got to the point where I had to NVflash back to stock to get anything done.Thought I had bricked it at one point, and this was less then 5 hours after unboxing it. Gotta get that stock piece of crap software off ASAP and CM6.1 was the first I tried.
CM may be "Stable" but its still very much in the experimental stage. No regrets with going with the Vegan TnT rework.
Thanks for your reply. I'm glad I'm not the only one seeing this problem. I spent another couple hours today looking for a solution and I still can't find one.
BTW, I don't know what the other ROM options are. I can't really use TnT Lite because the warning here [http://forum.xda-developers.com/showthread.php?t=842004] says it cannot be used unless the stock recovery is in place. I have Clockwork Recovery installed (and I don't really want to uninstall it).
I would prefer a Gingerbread ROM. I've tried two as I said in the OP, but they were both based on CM7 and they are both missing the option to connect/mount USB storage. So I'm looking for other ROMs. Any suggestions?
I would strongly recommend Vegan Tab gingerbread experimental http://vegantab.gojimi.com/download/VEGAn-7-02242011-Experimental.zip. I have been using it for the past 3 weeks and love it. Though it says experimental it is quite stable and have not experienced and FCs.
NOTE: It uses the original way of mounting memories (internal is in \sdcard and microSD in \sdcard2).
dcnarad said:
I would strongly recommend Vegan Tab gingerbread experimental http://vegantab.gojimi.com/download/VEGAn-7-02242011-Experimental.zip. I have been using it for the past 3 weeks and love it. Though it says experimental it is quite stable and have not experienced and FCs.
NOTE: It uses the original way of mounting memories (internal is in \sdcard and microSD in \sdcard2).
Click to expand...
Click to collapse
Thanks. I'll try it. How different is it from this ROM I already tried?
http://vegantab.gojimi.com/download/update-cm-7.0.0-Beta1-Harmony-signed.zip
Might those be the same?
I don't have an ext SD card in the tablet. I'm assuming I should be able to mount the internal memory like I did with the stock ROM...
I know this is an old thread, but I too had this problem. Here's what I did to solve it.
I went into the ADWLauncher settings and under "General Behavior", I choose "Swipe Down Actions". Once there, I set it to Open/Close notifications".
Now, when I plug in the USB cable and swipe down, I see the menu where it allows me to turn on USB Storage.
dgstan said:
I know this is an old thread, but I too had this problem. Here's what I did to solve it.
I went into the ADWLauncher settings and under "General Behavior", I choose "Swipe Down Actions". Once there, I set it to Open/Close notifications".
Now, when I plug in the USB cable and swipe down, I see the menu where it allows me to turn on USB Storage.
Click to expand...
Click to collapse
I just installed CM7 to my internal EMMC on my Nook Color. I wanted to thank you for posting this. It's exactly the info I needed. Now I can mount my Nook just like I used to under the stock OS.
dgstan said:
I know this is an old thread, but I too had this problem. Here's what I did to solve it.
I went into the ADWLauncher settings and under "General Behavior", I choose "Swipe Down Actions". Once there, I set it to Open/Close notifications".
Now, when I plug in the USB cable and swipe down, I see the menu where it allows me to turn on USB Storage.
Click to expand...
Click to collapse
Thanks for posting this. I was looking for the same information.
Hi, I need your help about the following issue: I successfully install Cyanogenmod 9 on the Atrix and everything works fine except the internal storage. My phone don't use the internal 10GB memory.
At the moment I can't use several apps ( gallery and camera over all ), Music is the only app working properly. It gives back this message "No storage - No external storage available", the point is I want the Atrix to use internal storage.
I can easly see and browse /emmc by the terminal emulator; for this reason I don't think it to be something involving permissions to enter or use /emmc.
In Settings Menu I can't find any option to properly mount the internal sd ( can only see the memory status ).
Thank you for replies.
Look in settings-storage-menu button
turl1 said:
Look in settings-storage-menu button
Click to expand...
Click to collapse
I have already tried but nothing happened - just the vibration pushing the menu button in settings-storage. It seems there's no menu in settings-storage.
You need to go to Settings > Advanced > Use internal storage.
After you check marked it, reboot and you are done. :]
Its in the settings-->storage---> storage settings-->bottom of page to storage location--> make sure its on internal storage
ToonShadow said:
You need to go to Settings > Advanced > Use internal storage.
After you check marked it, reboot and you are done. :]
Click to expand...
Click to collapse
There's no "Use internal storage" in Settings-Advanced.
Matttrix said:
Its in the settings-->storage---> storage settings-->bottom of page to storage location--> make sure its on internal storage
Click to expand...
Click to collapse
Storage menu only shows some status bars about the memory usage. I can't see any option.
Maybe those options have been deleted in CM 9/ics.
Thank you for your replies.
Sent from my MB860 using Tapatalk 2
It's in Settings-Advanced. Not in Settings-Storage.
quetzalcoatl2435 said:
It's in Settings-Advanced. Not in Settings-Storage.
Click to expand...
Click to collapse
I can't post screen shots because I can't use memory to save pictures but in my settings-advanced menu there are only two options: fingerprint sensor and hdmi audio.
There's an issue with my rom?
Which ROM are you using? Jokersax's? Turl's? CNA? AOKP?
quetzalcoatl2435 said:
Which ROM are you using? Jokersax's? Turl's? CNA? AOKP?
Click to expand...
Click to collapse
Jokersax but I don't know what version. Hope the last one.
Sent from my MB860 using Tapatalk 2
I am on Jokersax's latest version (0.5.1). Have you tried the SD Card switch script?
quetzalcoatl2435 said:
I am on Jokersax's latest version (0.5.1). Have you tried the SD Card switch script?
Click to expand...
Click to collapse
Not yet, never heard of that. Can you link me something about that?
edit:
I've Installed the sd switch script but nothing changed. I think i'll try formatting and installing Jokersax v 0.5.1 to be sure i am using the last version.
It's on his homepage. Scroll down, download the zip, flash in cwm.
Wait, the internal storage is detected in cwm, right? And it does mount on Windows/Mac/Linux/whatever-os-you're-using?
quetzalcoatl2435 said:
It's on his homepage. Scroll down, download the zip, flash in cwm.
Wait, the internal storage is detected in cwm, right? And it does mount on Windows/Mac/Linux/whatever-os-you're-using?
Click to expand...
Click to collapse
Script installed, but nothing changed. The storage mounts properly on Windows. I can browse it also inside android ( via terminal emulator or file manager without difficulty ).
I think i am going to install Jokersax 0.5.1 to be sure i am using the last version.
EDIT:
Great News! I was not using Jokersax's last rom. Now i have selected internal storage in settings-advanced and everything works fine.
Thank you all for the help.
Now that I've solved the internal storage problem i would like to ask you some questions.
The first is about the camera: i know there are still problems with jokersax rom and the camera application. There are some external apps to record video or shoot photos without lag or freezing issue?
Second, I tried to see some videos recorded with the motoblur camera ( gingerbread ) and the video stream has a looot of lag. Do i have to get some external codec or anything else? There is already any solution to this problem?
Third and last question, the default browser seems to crash sometimes after display frame rotation and doesn't work properly with some flash application. Solutions?
Thank you for your attention.
wilemworte said:
Now that I've solved the internal storage problem i would like to ask you some questions.
The first is about the camera: i know there are still problems with jokersax rom and the camera application. There are some external apps to record video or shoot photos without lag or freezing issue?
Second, I tried to see some videos recorded with the motoblur camera ( gingerbread ) and the video stream has a looot of lag. Do i have to get some external codec or anything else? There is already any solution to this problem?
Third and last question, the default browser seems to crash sometimes after display frame rotation and doesn't work properly with some flash application. Solutions?
Thank you for your attention.
Click to expand...
Click to collapse
#1: Try using videocam illusion for videos, idk if it works with his latest build though.
#2: Try using a 3rd party aplication like Mobo player.
#3: Browser rotation hasnt been fixed yet, well it has but its only in the kitchen sink rom
as an option since it still has a.couple bugs. As for flash issues, make sure.you have.the latest version of flash installed.
wilemworte said:
Now that I've solved the internal storage problem i would like to ask you some questions.
<snip>
Second, I tried to see some videos recorded with the motoblur camera ( gingerbread ) and the video stream has a looot of lag. Do i have to get some external codec or anything else? There is already any solution to this problem?
Third and last question, the default browser seems to crash sometimes after display frame rotation and doesn't work properly with some flash application. Solutions?
Thank you for your attention.
Click to expand...
Click to collapse
Video problems: http://forum.xda-developers.com/showthread.php?t=1605518
Browser rotation crashes. Known issue with drivers.
Hey guys, im on stock JB for Poland I9300XXELK4_I9300OJKELK5_HOME.tar (4.1.2). And i cannot seem to find usb utilities option anywhere
Its normally in Settings > More settings > USB Utilities. But its not there. Any solution??? Thanks.
stanley08 said:
Hey guys, im on stock JB for Poland I9300XXELK4_I9300OJKELK5_HOME.tar (4.1.2). And i cannot seem to find usb utilities option anywhere
Its normally in Settings > More settings > USB Utilities. But its not there. Any solution??? Thanks.
Click to expand...
Click to collapse
What do you want to do? This option does not exist in any version of jellybean.
Tyxerakias said:
What do you want to do? This option does not exist in any version of jellybean.
Click to expand...
Click to collapse
Bro copying stuff to phone sd or external sd is ALOT faster using mass storage mode than MTP mode.
Like im trying to copy in my game data files now, and its saying 3hrs 15mins now. If you understand...
stanley08 said:
Bro copying stuff to phone sd or external sd is ALOT faster using mass storage mode than MTP mode.
Like im trying to copy in my game data files now, and its saying 3hrs 15mins now. If you understand...
Click to expand...
Click to collapse
Did you just get the SGS3? I thought you just upgraded to JB, my mistake.
Mass storage mode was NEVER available on this phone. Samsung has opted for MTP. There are tricks around it if you're root, check out the easy ums app.
Tyxerakias said:
Did you just get the SGS3? I thought you just upgraded to JB, my mistake.
Mass storage mode was NEVER available on this phone. Samsung has opted for MTP. There are tricks around it if you're root, check out the easy ums app.
Click to expand...
Click to collapse
LOL! You are very Correct. I got my GS3 only a few hours back. I always had a GS 2 and it was available there... And yes! I just flashed JB too!
Hello once again,
This Rom is based on latest Nook Tablet CM10.1 Branch courtesy of our great developers aka Kuzma,Chris,Rebellos etc.
It has SGT7 modifications taken from https://github.com/sgt7 plus cherry picks from https://github.com/loosethisskin.
Links:
Updated Rom 28/03/13:
http://goo.im/devs/meghd00t/sgt7/sgt7_10.1-20130328-acclaim-meghd00t.zip
Previous Roms:
http://goo.im/devs/meghd00t/sgt7/sgt7-10.1-20130224-0601-acclaim-meghd00t.zip
http://goo.im/devs/meghd00t/sgt7/sgt7-10.1-20130131-0219-acclaim-meghd00t.zip
Gapps:
http://goo.im/gapps/gapps-jb-20130301-signed.zip
New recoveries with sgdisk tool implemented:
TWRP V2.4.0
http://celticstorage.co.uk/cm10/TWRP_v2.4.0_sgdisk_emmc.zip
CWM V6.2.7
http://celticstorage.co.uk/cm10/CWM_v6.2.7_sgdisk_emmc.zip
Rom+Gapps+Recovery flash Instructions:
1.Copy rom(zip) file and gapps (zip) and twrp/cwm recovery package onto internal/external sdcard
2.Reboot Nook Tablet and access Recovery.
3.Flash recovery package(optional) then Select from recovery to reboot to recovery once more so you flash rom and gapps with updated recovery!
4.Factory wipe, wipe cache.
5.Flash Rom then flash Gapps.
6.Select from recovery to reboot Nook Tablet
As always,
Enjoy your Nook
Known Issues:
After 4 touches, touch driver freaks out
Epic Citadel ( Unreal Engine 3) FC on touch.
Notified Mik_os about them (something went wrong from 4.1.2 ->4.2.2)hopefully we will see them squashed when and if he finds time....
Reserved for happyness. Thank you sooo much!
Thank you! im downloading right now :fingers-crossed:
Thanks Demetris.
Couple of 1st impressions:
1) The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
2) I really liked the large status bar icons in your CM10 rom as they are easier on the eyes. Is there any way to make the icons (clock, battery, etc) larger in this rom?
larrycl said:
1) The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
Click to expand...
Click to collapse
Agreed - same thing happens with my install of it.
The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
Click to expand...
Click to collapse
All data is defaulted to internal sdcard by design and imo this is the correct way and if you search around you will find that when otherway around when there isnt one ext-sdcard in the nook the mounting has bugs.
How to add and remove tablet quick setting, I can't find the option for it, the rom only allow me edit the default JB tiles and layouts
Because the sdcard was mounted as internal storage, so all data and installed apps will disappeared. How to reversed it without reinstall again.
I currently have your other ROM installed (SGT7+CM10+Cherry Picks), can I update to this new one without a full wipe? And also will the sdcard switched to internal storage mess up the currently installed apps like the previous posters have mentioned?
Trism said:
I currently have your other ROM installed (SGT7+CM10+Cherry Picks), can I update to this new one without a full wipe? And also will the sdcard switched to internal storage mess up the currently installed apps like the previous posters have mentioned?
Click to expand...
Click to collapse
1.No
2.Yes
How to enable ADB debug? Can't find the option.
qingz said:
How to enable ADB debug? Can't find the option.
Click to expand...
Click to collapse
Go to Settings... About Phone... Click on the "Build Number" item 7 times to enable the Development Settings option.
Re: [ROM]{WIP} SGT7+CM10.1+Cherry Picks,By meghd00t. 31/01/13
It is under development options, which may not be enabled.
To enable it go to about tablet and tap build number 7 times (from memory) I think.
It has been hidden by default for some reason.
Sent from my NookTablet using xda premium
I'm having deep sleep / battery problems with this rom.
I turn off the wifi at night before going to bed. Even with wifi off, it drained substantially overnight.
c600g said:
Go to Settings... About Phone... Click on the "Build Number" item 7 times to enable the Development Settings option.
Click to expand...
Click to collapse
rorymc928 said:
It is under development options, which may not be enabled.
To enable it go to about tablet and tap build number 7 times (from memory) I think.
It has been hidden by default for some reason.
Sent from my NookTablet using xda premium
Click to expand...
Click to collapse
That's tricky!
Thanks!
The EMMC/SD swap has made it so that games and other things that require the SD space will not install.
EDIT: Yeah, the apps themselves will install to "internal", but wish to store their massive obb data on the SD card which now only reads as 1GB.
flippage said:
The EMMC/SD swap has made it so that games and other things that require the SD space will not install.
EDIT: Yeah, the apps themselves will install to "internal", but wish to store their massive obb data on the SD card which now only reads as 1GB.
Click to expand...
Click to collapse
You obviously need to repartition your nook.
Runs beautifully for me. Just to let you know, if you drain it to 0 and it turns off, and your nook cable has broken (as they easily do), it will take ALL NIGHT for it to turn back on with trickle charge. I plugged it into a cell phone charger, which didn't work at all, but then used a cable for external 2.5" hard drives, the type that has two usb plugs, one for power and the other for power and data, and left it overnight.
THAT worked. Just sayin'
But this seems to be the case with the slow charging (whether Nook cable or regular usb) with ALL of the 4.2 roms that I have tried (even 4.1). Oh well. Not a problem for me, but just in case someone else has that problem.
On the other hand, I have not used a rom on the nook yet which I like better or has been more stable for me than this one. Good job demetris!
demetris_I said:
You obviously need to repartition your nook.
Click to expand...
Click to collapse
Sorry, it wasn't as obvious to me because it was never an issue with any other rom that was ever released. ever. Thanks for your help. I do enjoy your mods and the time you put into it.
Far and away my favorite ROM. There's nothing out there that's as stable for me as the SGT/Cherry Pick ROM.
Re: [ROM]{WIP} SGT7+CM10.1+Cherry Picks,By meghd00t. 31/01/13
Meghd00t- will you be updating based on kuzmas 2/06 release? I ask because I saw you released a kernel in that thread, and I was wondering if it should be flashed over this ROM, etc. I prefer to stay with your versions as they are always speedier for me. I have noticed, I am again experiencing that when plugging in to charge, I have to turn on the screen until it says or shows charging, though this is a very minor issue. Thanks again!
Sent from my NookTablet using xda app-developers app
It just stopped working. When I plug into PC, it just says it's charging? No idea what I could have done. I even tried restoring my backed up stock rom, but that made no difference. Tried two different PC's. What settings should I look for? Can I get to it via reboot, and pressing something. I seem to remember one time when my phone wouldn't boot, that I still had USB access.
big_dog1968 said:
It just stopped working. When I plug into PC, it just says it's charging? No idea what I could have done. I even tried restoring my backed up stock rom, but that made no difference. Tried two different PC's. What settings should I look for? Can I get to it via reboot, and pressing something. I seem to remember one time when my phone wouldn't boot, that I still had USB access.
Click to expand...
Click to collapse
If you have CWM installed then yes, you *should* be just fine. In mounts and storage menu, the last option i think is "mount USB storage" and it will show up in windows as removable storage then. If this doesn't work I can guess two things, one, your cable only has the power pins still connected, and not data. So try another cable. Or, on the USB connector inside your phone its not connecting both data pins, only power.
Should be able to visually check for damage to the micro usb port. Best of luck.
[r.]GimP said:
If you have CWM installed then yes, you *should* be just fine. In mounts and storage menu, the last option i think is "mount USB storage" and it will show up in windows as removable storage then. If this doesn't work I can guess two things, one, your cable only has the power pins still connected, and not data. So try another cable. Or, on the USB connector inside your phone its not connecting both data pins, only power.
Should be able to visually check for damage to the micro usb port. Best of luck.
Click to expand...
Click to collapse
I have TWRP. Does that change the suggestion?
big_dog1968 said:
I have TWRP. Does that change the suggestion?
Click to expand...
Click to collapse
not if there is an option to enable storage, I haven't used twrp in forever, so I can't tell you definitively. You could download CWM on your device and flash it in TWRP though.
USB port appears fine. Tried different cable that works on my son's phone and it still didn't work. Is there an app that is good for troubleshooting usb connections someone could recommend. Thanks.
big_dog1968 said:
USB port appears fine. Tried different cable that works on my son's phone and it still didn't work. Is there an app that is good for troubleshooting usb connections someone could recommend. Thanks.
Click to expand...
Click to collapse
According to google TWRP does have an option to mount usb storage, have you tried seeing if windows can recognize your phone storage in recovery?
An alternative solution could be to use a shared folder in windows and ES file explorer to connect to that share, and send and receive files that way, so at least you have some ability to manage the device. *through WiFi on the phone to the LAN that your PC is on*
I would suggest deleting all the drivers for your device in windows but you already said you tried on a second computer. I'm stumped on this one at the moment.
[r.]GimP said:
According to google TWRP does have an option to mount usb storage, have you tried seeing if windows can recognize your phone storage in recovery?
An alternative solution could be to use a shared folder in windows and ES file explorer to connect to that share, and send and receive files that way, so at least you have some ability to manage the device. *through WiFi on the phone to the LAN that your PC is on*
I would suggest deleting all the drivers for your device in windows but you already said you tried on a second computer. I'm stumped on this one at the moment.
Click to expand...
Click to collapse
Thanks for the suggestions. So far, none have worked. I wonder if there is an android app, that can check if the usb ports are working or not?
I had the same problem on SlimBean, Beanstalk and maybe another I can't remember. Switching to dvhexer's CM 10.2 fixed it. I THINK my problem was that those other ROMs require the phone to have been on stock 4.1.2 before flashing and dvhexer's CM 10.2 doesn't. I'm not sure, but that seems likely to me. In any case, make a backup of your current ROM and flash CM 10.2 to see if that fixes the issue. I really like Beanstalk but the ability to connect to my PC is vital to me so I'm on 10.2 for now. Hope this helps.
Sent from my Optimus G using XDA Premium 4 mobile app
Removed
Have the same problem :/ it randomly happened to me, haven't found any sort of fix.
I think I'm going to go back to stock, take it to a service center and say, "it aint workin". Still under warranty. Doubt they'll do much snooping if it appears to be running stock Rom.
Can you even flash back to stock? I tried flashing it once and it wouldn't boot, completely wiped everything and reinstalled and it still wouldn't boot, so I'm stuck on custom roms apparently with no connection to pc so no lgnpst possible
Sent from my LG Optimus G using Tapatalk 4