Related
I can't turn on my X10.When i press the on button,it's only vibrate a bit then nothing happen.No light is on even when i plug in.More over,when i plug in the press the on button,it won't even vibrate like without cable.
Please help me
Have you tried to re-flash it with the 2.1 or 1.6 FW with Bin4ry's flasher?
Which device do you have? A generic one or developer phone?
i'm having the generic one and i just update it to 2.1 this monday.
It won't seem to have any power goes in when i plug in.How i'm going to reflash it anyway? please help me
shinnie88 said:
How i'm going to reflash it anyway? please help me
Click to expand...
Click to collapse
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
shinnie88 said:
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
Click to expand...
Click to collapse
Nice 1. It's totally up to you, I've stuck with the Nordic for now.
My phone went off again.This times also can't turn on or charge.But when i hit the on button,itz flash red 3x then went off.Anyone know what happen? please help me
X10 only vibrate
Same problem here X10 only vibrates,
i tried flashing bin4ry way it stops at around 75%
Tried even in sonyericsson update service but still no luck
It also stops around 25%, my phone is generic & my battery
Is fully charged any ideas?
Pls help
I have the same problem if I flash a firmware using FlashTool. I am stuck at 1.6 and I can't install any other firmware because I can't turn it on. Only firmware that works is the one from ROOT_F3V3 but it is a 1.6 firmware
If you find a firmware that works please post it.
Try downloading the latest Flashtool and then flash the latest firmware available; http://forum.xda-developers.com/showthread.php?t=936733
Its happened before. The phone will not boot, I waited several hours and ... it was working again, but I do not know why
Try to connect into flash mode and install SE original ?
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
1. Take your battery out.
2. Hold the back button. Make SEUS running and ready.
3. Plug it into the computer.
4. Put your bateery back in.
Follow the instructions. Hopefully it would work and good luck
If it worked dont forget to hit thanks button.
Sent from my X10i using XDA Premium App
ty so much JingleJo, your method worked for me
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Man plzz help me i'm a noob in this things i have the same problem with that guy but i dont know how to reflash my phone :S where can i take the 2.1 :S i dont know nothing :S:S
---------- Post added at 10:26 AM ---------- Previous post was at 10:20 AM ----------
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Plzz help me i have the same problem :S but i dont know how to reflash my x10 :S i dont know where can i take the 2.1 plzz can u tell me with a video or with steep :$ like baby plzz
My xperia arc went dead after trying to upload OTA update, yeah i know i shouldn't have but i guess it too late now. however i will like any help as to how to revive my phone. the charging light even don't turn up.
Pls anyone, I'm desperate
PS:the phone was unlocked
download the generic 2.1 firmware and save as in flashtool/firmwares.
Put yout phone in flashmode and flash back to 2.1....
Sent from my SO-01C using xda premium
Pc companion to 2.3 then do ur thing..like modding and stuff
Sent from my SO-01C using xda premium
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Interestingly - I have excatly the same situation with my partners phone. Attempted to downgrade to 1.6 using a couple of methods - editing build.prop and then SEUS and flashing this firmware.
Problem I have now is SEUS says I have the latest firmware and doesn't offer an update - I guess this is because the version of the software that is installed is higher than what is currently avaiable to the CDA I have put in the build.prop
Next I tried putting 2.1 back on from this thread.
The phone will not boot still it does excatly what you have said - blinks, vibrates and then turns off!
Thank you for the reply. It is good to know Im not alone
In my case SEUS always says there is a newer version and flashes the phone. It goes all the way to the end and says the upgrading was successful.
Would it be possible that although the phone "accepts" being flashed, it is not actually writting anything to a persistent state?
Is there a way to verify if what I flashed is really there? Otherwise SEUS should way nothing to upgrade, since it already did it all the way through successful.
easy question:
are you sure you have battery remaining to start it up and flash? if not, try to charge the battery on another phone.
I guess so.
I'm using a multimeter to measure the power of the battery, which varies from 3.6 to 4.1 volts, depending on how long I leave it on the charger.
So although the phone gives no indication of being charged, I guess that measure is enough to say it is being charged, right?
I've even just tried Omnius Server, which flashed perfectly fine, but still the phone won't boot Its completely dead now
Yep. I also tried that. Wasted money..
So far no change.. the thing is still a brick.
.. well, a brick is at least heavy enough to actually deal some damage when thrown..
Hah Just getting it exchanged now - tried everything - given up!
well, just in case you have it on warranty, go ahead
take it to the shop
repair
stop wasting time and money... go to a GSM SERVICE... you need service tool to revive your phone if it's deadboot...
i use setool to flash sony-ericsson phones and it's the best flash tool...
if it's bootfcked, then you need jtag's...
@sanyyous
setool will flash the phone just like SEUS or FlashTool will, right? or it will do some other kind of flashing witchery?
and jtag you mean hardware debug and service, right?
the issue is: I bought the phone in London and I'm in Brazil now. So either I fix or I see a trash bin in this little x10's fate.
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Man.. I will try as soon as I get home... and if it works.. expect a good donation.
Out of curiosity - did it work?
Sent from my X10i using Tapatalk
I still couldnt try.
In Italy now. I'm going back to Brazil only Feb 3rd.
Meanwhile I'm trying to convince my gf that she couldnt break the phone even further for trying. Hopefully I'll lure her into doing it until this weekend.
Firgers crossed.
Bin4ry said:
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Click to expand...
Click to collapse
If this works, it's a miracle.
Maybe trying the fridge would have the same result, but all that ice could damage the phone .
Good luck and I really want to know if it works.
Yeah, on the fridge the moisture would probably ruin the phone even further. .. if thats at all possible.
And believe me, no one would wanna see if it works more than me.
<girlfriend-apeal>
you see, everyone wants to know if that works. please, you wont ruin the phone further just by trying it )
</girlfriend-apeal>
My wife's x10 is OK, so it would just be out of curiosity for me .
Good luck.
I got my gf to try but it didnt work
I'll try it myself when I get home next week, but I dont think thats gonna work..
Anyway, I drop by next week to comment on the final status.
Thanks for the replies so far.
fabioroger said:
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Click to expand...
Click to collapse
i tried to install the gingerbread theme but after i moved the framework file into system/framework folder my phone rebooted by itself and blocked to SE logo screen.... i wanna flash the phone but i'm unable to switch usb debugging mode on..... any suggestions to turn the usb debugging on or flash the phone witout it....???? tnx in advance 4 any suggestion
Hi guys,
I have a problem with my x10 mini pro. There are some similar posts here but nobody exactly describe what is happening to me. So my problem:
One day i have been in subway, phone working properly everything fine. THan suddenly 3G icon has disappear and wouldnt go back. So i decided to restart the device. But since i turned it off, i cannot turn it back on again...
I have tried to take out the simcard, take out mempory card, multiple time reflash by SEUS but still cannot turn it on.
I cna charge the phone with no problem, i can flash it with no problem, but i cannot use it at all.
When i press power button, phone shortly vibrate as he is turning on, than display get a bit brighter (not white, just lights up its easy to notice from profile). and than after few seconds get black again. And like this it continue until it drains battery, only without vibrating. every cca 5 seconds display light up and than get black again. So i guess its rebooting all the time. I have tried all tricks like pressing power+home button, still nothing.
I think i just need really wipe out the whole phone and flash it again. Is it possible somehow? I feel like reflashing by SEUS is not real hardcore flash, is there anything stronger i can try?
I am willing to try anything if anybody has an idea, since its not working anyway so i dont care what i try.
Thanks for advices !
try binary's flash tool, it helps every out. use it in the same way you would SEUS
http://forum.xda-developers.com/showthread.php?t=826455
Dan53 said:
try binary's flash tool, it helps every out. use it in the same way you would SEUS
http://forum.xda-developers.com/showthread.php?t=826455
Click to expand...
Click to collapse
I try this already... Still the same
Try to flash 1.6 back.
I had the same problem, didnt ever find a way to fix it so had it replaced under warrenty. may be your only way on this problem im afraid.
I tried 1.6 - didnt work
Problem is that i have no warranty.... I just gave it to my friend who is going to singapore, she knows some official SE shop, so maybe i will get it fixed, but im not sure if it wont be for the same money as new phone...
Well the phone is under a year old so it will be covererd under se warranty unless they think you broke there warranty in any way. I would flash it back to your original FW before having it looked at and wipe your sd card.
I bought it in chinese market (Its not a copy) without any receipt or anything, I dont think so they will took it as a warranty. I have done all of this. Flashed to my original FW, wiped everything, nothing works...
did u try SEUS ?
is your phone getting detected via SEUS in flash mode ? what happens when :
1. Take off the battery for 30 secs
2. connect the phone to usb
3. Power on the phone with back button pressed.
if SEUS detects u should be able to flash it. The flash tool also should be working.
hi guys. my x10 froze at se boot and does nothing. i've read through almost all helpfull threads that are similar to my problem but the problem still persist. fyi, i booted to xrecovery, made a backup and i noticed that there were problems in backing up (md5 chcksum, i think). but the backup file was created. i restored using that file and now it is stuck at boot. i can't even turn the phone off. i've tried hard reset, tried using the sues, flashtoo and even pc tools but to no avail. this is due to the phone can't connect to usb. can anyone please help me.
You have do a factory reset and wipe cache?
how can i do that andres3d? are there any way for me to do that? i'm trying but the phone just can't go past the se boot. it's just stuck there. i can't even turn the phone off. the only way is to take out the battery.
Try this, enter into xrecovery and select "factory resect" first at all, then reboot.
I got stuck there too, and I haven't the xRec installed
You can download the SE Update Service (SEUS) and flash the original rom back to it.
Download the software and install, take off the battery, wait a little bit (30s or so), insert the battery back. DO NOT TURN ON THE PHONE YET.
Open the SEUS, choose the phone (X10) and click 'go', or 'ok', or whatever. Keep going and the software will tell you to plug the phone. Plug the phone turned off. When it's plugged, turn it on holding the back button until the software tells you to release.
Wait a few moments... and it's done. Turn on your phone, it should take a little longer to boot, but it's just the first time, then it boots normally.
It's quite easy to do when you know what to do
thanks in advance but i've tried both method and it still got me nowhere. first, i can't boot to xrecovery at all and second, the sues doesn't even detect my phone.
Did you try download a stock firmware from here and install by flashtool?
Do you have installed drivers from x10 to your PC?
I thing the only way is by flashtool, because you don't have xrecovery access l.
http://forum.xda-developers.com/showthread.php?t=872298
Sent from my X10 using XDA App
rota2903 said:
thanks in advance but i've tried both method and it still got me nowhere. first, i can't boot to xrecovery at all and second, the sues doesn't even detect my phone.
Click to expand...
Click to collapse
Your phone must be charged ¬¬
Leave him charging at wall for about 45-60min and then try to do the step-by-step
tnx
tnx guys. i'll try the methods that u guys suggested. i really hope that i don't have to send the phone back to the shop.
OMG. it was actually my cable!!! that's why i can't flash my phone. now the phone is back to it's original state. anyways, i would like to thank all of you guys that have given me great advice. thanks again guys.
[Q] {HELP} another x10 stuck at se boot part 2
rota2903 said:
OMG. it was actually my cable!!! that's why i can't flash my phone. now the phone is back to it's original state. anyways, i would like to thank all of you guys that have given me great advice. thanks again guys.
Click to expand...
Click to collapse
Hi all
Unfortunetly my case is 99% similiar as "Sony Ericsson XPERIA X10XPERIA X10 Q&A[Q] {HELP} another x10 stuck at se boot" but changing the cables doesn't help. The only thing which the phone respond is to hold back starting of booting what immidietly happening when i'm connecting the usb cable.
I had xrecover installed before but is not starting onto flashing mode.
Any ideas
Here's the situation:
My sister did something bad about her phone(x10 mini pro).
It has a newly installed stock rom (the phone used to have cyanogen but she told me to revert it back to stock).
She told me that all she did was install SonyEricsson Xperia Flasher on her machine and used it to flash her x10 mini pro. The flasher tells her that it is succesfull but when she turned off her phone for a restart, the phone does not turn on anymore. I have tried charging the battery overnight as well as using a different working battery but it does not help. Pressing the power button does nothing. No led light, no vibration, nothing. I have also tried different button combo(tried almost any combination) found here in forums but it does nothing as well.
I bought this device to a tech guy which is in a mall and he is charging me Is there something else I can do to fix thing device without spending? Is there another way other than unbrickin it with JTAG?
Any help or suggestion would be greatly appreciated.
Edit:
SEUS does not help because the phone cannot be detected when plugged in because it doesnt turn on and yes, I tried using a different usb cable.
I think my sister flashed the wrong kernel.
Does the battery charge (green LED)?
Do you know someone with the same phone? Try his/her battery. I had this problem too once, it would not turn on or anything, untill i tried to insert another battery. Then it started up and all. After clear battery stats, it worked again with my own battery.
This gives me the assumption, that is has something to do with battery stat (doh') - therefore all guides about doing a SEUS or other stock flash, should also instruct users to do a clear battery stat before the stock-flash.
Any one correct me on this if i'm totally wrong
gonix said:
Here's the situation:
My sister did something bad about her phone(x10 mini pro).
It has a newly installed stock rom (the phone used to have cyanogen but she told me to revert it back to stock).
She told me that all she did was install SonyEricsson Xperia Flasher on her machine and used it to flash her x10 mini pro. The flasher tells her that it is succesfull but when she turned off her phone for a restart, the phone does not turn on anymore. I have tried charging the battery overnight as well as using a different working battery but it does not help. Pressing the power button does nothing. No led light, no vibration, nothing. I have also tried different button combo(tried almost any combination) found here in forums but it does nothing as well.
I bought this device to a tech guy which is in a mall and he is charging me Is there something else I can do to fix thing device without spending? Is there another way other than unbrickin it with JTAG?
Any help or suggestion would be greatly appreciated.
Edit:
SEUS does not help because the phone cannot be detected when plugged in because it doesnt turn on and yes, I tried using a different usb cable.
I think my sister flashed the wrong kernel.
Click to expand...
Click to collapse
The Experia Flasher is not for the 2010 devices i think, so she may well have flashed the wrong firmware. SUS doesn't need to detect the phone, if you choose update and it can't recognise the phone it offers a repair option, this lets you choose the model yourself, it will download the proper firmware and all you have to do is connect your phone in flash-mode (ie hold the back-button while you plug in the usb-cable).
But she may well have bricked it properly and in that case, JTagging it is the only option to get it back up and working.
Screen-shots are from the old PC Companion, byt they still looks very much like them in the new version
http://forum.xda-developers.com/showpost.php?p=17458289&postcount=8
Emperor.dk said:
Does the battery charge (green LED)?
Do you know someone with the same phone? Try his/her battery. I had this problem too once, it would not turn on or anything, untill i tried to insert another battery. Then it started up and all. After clear battery stats, it worked again with my own battery.
This gives me the assumption, that is has something to do with battery stat (doh') - therefore all guides about doing a SEUS or other stock flash, should also instruct users to do a clear battery stat before the stock-flash.
Any one correct me on this if i'm totally wrong
Click to expand...
Click to collapse
Oh I know someone who has the same x10 with me. I guess Ill have to try your suggestion.
SmG67 said:
The Experia Flasher is not for the 2010 devices i think, so she may well have flashed the wrong firmware. SUS doesn't need to detect the phone, if you choose update and it can't recognise the phone it offers a repair option, this lets you choose the model yourself, it will download the proper firmware and all you have to do is connect your phone in flash-mode (ie hold the back-button while you plug in the usb-cable).
But she may well have bricked it properly and in that case, JTagging it is the only option to get it back up and working.
Click to expand...
Click to collapse
It doesnt help because when Im in the part where it says, press the back button while inserting the usb, the phone cannot be detected and so the update cannot continue.