Related
I have x10 mini.....
bootloader unlocked
flashed [KERNEL] nAa-ICS-02
I can flash any kernel.....then I can flash any rom....(Cm9 I want ))
but rom never boot never started.....when I open the phone appeas the logo of kernel and then restart the phone...and I can't remove baterry..
wipe all data, cache, dalvik-cache .....I did it all the times
Also stock kernel with 2.1 original min x10's android don't run...the same problem...Appears logo of sony ericsson and restart...Someone here said that may be in a different baseband...The phone I bought from Vodafone store.....
Seus can't recognise my phone so I can't do a repair...What can I do?
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?
SmG67 said:
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?[/Q
I connect the phone and then I see a message:
In your phone is already installed the latest available software
Click to expand...
Click to collapse
mynick13 said:
SmG67 said:
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?[/Q
I connect the phone and then I see a message:
In your phone is already installed the latest available software
Click to expand...
Click to collapse
Leave your phone unplugged from the computer when you ask SEUS to search for an update. Since it won't recognise the phone it won't find any updates and assume your phone it broken, so it will give you a repair link.
Click on it, and follow the steps.
Click to expand...
Click to collapse
SmG67 said:
mynick13 said:
Leave your phone unplugged from the computer when you ask SEUS to search for an update. Since it won't recognise the phone it won't find any updates and assume your phone it broken, so it will give you a repair link.
Click on it, and follow the steps.
Click to expand...
Click to collapse
I can't do it in seus....it recognise phone and says no updates necessary ..
With Pc companion I can get into repair but loading and then a message:
server is too busy
Click to expand...
Click to collapse
mynick13 said:
I can't do it in seus....it recognise phone and says no updates necessary ..
With Pc companion I can get into repair but loading and then a message:
server is too busy
Click to expand...
Click to collapse
Take the back off your phone and post the two lines underneath the second barcode please Maybe i've got a solution.
SmG67 said:
Take the back off your phone and post the two lines underneath the second barcode please Maybe i've got a solution.
Click to expand...
Click to collapse
Here is all of the back of the phone with buttery characteristics
Thank you
This is stock firmware for the E10i for flashtool, move it to the firmwares folder and flash it like you would flash a kernel.
It's 2.1.1.A.0.6, baseband *4015, with a loader.sin for unlocked bootloader.
Let me know if your phone works after flashing this.
SmG67 said:
Thank you
This is stock firmware for the E10i for flashtool, move it to the firmwares folder and flash it like you would flash a kernel.
It's 2.1.1.A.0.6, baseband *4015, with a loader.sin for unlocked bootloader.
Let me know if your phone works after flashing this.
Click to expand...
Click to collapse
I'ts working!!!!!!!!!!!!!!!!!! thanks very much.....and then I flash E10_nAa-ics-03_2.6.29.6-nAa-ics-03 and any rom I want......:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::laugh::laugh::laugh::laugh::laugh:
Thnks very much.....What was the problem???
mynick13 said:
I'ts working!!!!!!!!!!!!!!!!!! thanks very much.....and then I flash E10_nAa-ics-03_2.6.29.6-nAa-ics-03 and any rom I want......:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::laugh::laugh::laugh::laugh::laugh:
Thnks very much.....What was the problem???
Click to expand...
Click to collapse
Don't know, I think you did something wrong somewhere, but glad it helped.
On the ICS kernel, only flash ICS-roms that state they need that kernel.
If you want Gingerbread, flash the nAa-GB kernel.
SmG67 said:
Don't know, I think you did something wrong somewhere, but glad it helped.
On the ICS kernel, only flash ICS-roms that state they need that kernel.
If you want Gingerbread, flash the nAa-GB kernel.
Click to expand...
Click to collapse
yes I know it....thanks
Hello guys. I have a sony xperia X10 mini and i tried to flash a custom rom(Jbean). First i use the "msm7227_semc" to unlock the bootloader and the the "flash tool" to flash the new kenel and rom. But something went wrong and now my phone is dead and cant recognised by usb port. Can someone give some help??
gouvits said:
Hello guys. I have a sony xperia X10 mini and i tried to flash a custom rom(Jbean). First i use the "msm7227_semc" to unlock the bootloader and the the "flash tool" to flash the new kenel and rom. But something went wrong and now my phone is dead and cant recognised by usb port. Can someone give some help??
Click to expand...
Click to collapse
What is the problem ?
You throwing your phone to the water ?
-_____-
Please be more specific, more the info you give, the more you get in return
After unlock bootloader, are your phone still alive or not ?
Yenkazu said:
What is the problem ?
You throwing your phone to the water ?
-_____-
Please be more specific, more the info you give, the more you get in return
After unlock bootloader, are your phone still alive or not ?
Click to expand...
Click to collapse
the phone is now dead! the battery was fully charged when i start the flashing procedure. When i use the flash tool to flash the new kernel (E10_2.6.32.61-nAa-06- and the E10i_JBMP-Release4 rom), suddenly the phone closed and till know its not responding! its dead and i cant connect via usb to my pc to flash a new memory,cause ist cant open!
gouvits said:
the phone is now dead! the battery was fully charged when i start the flashing procedure. When i use the flash tool to flash the new kernel (E10_2.6.32.61-nAa-06- and the E10i_JBMP-Release4 rom), suddenly the phone closed and till know its not responding! its dead and i cant connect via usb to my pc to flash a new memory,cause ist cant open!
Click to expand...
Click to collapse
So, you are flash kernel
And then flash rom via Flashtool ?
What I know, flashtool cannot flash rom.zip
And what flashtool log when you flash kernel ?
Please attach flashtool log here
I'll hazard a guess and think that the flashtool log will show he flashed the xt0blrelock.ftf instead of the nAa-kernel by accident...
SmG67 said:
I'll hazard a guess and think that the flashtool log will show he flashed the xt0blrelock.ftf instead of the nAa-kernel by accident...
Click to expand...
Click to collapse
We will see then
When log are here
XD
Yenkazu said:
We will see then
When log are here
XD
Click to expand...
Click to collapse
hmmm...the flashtool Log isn't saved automatically right? i can't find it unfortunatelly in my pc. I searched in "c:/flashtool", but i only found a saved log from a yesterday test. I think that i damaged the kernel in my phone. Is any way to connect now the phone with the pc??
gouvits said:
hmmm...the flashtool Log isn't saved automatically right? i can't find it unfortunatelly in my pc. I searched in "c:/flashtool", but i only found a saved log from a yesterday test. I think that i damaged the kernel in my phone. Is any way to connect now the phone with the pc??
Click to expand...
Click to collapse
No logs, no help
Just flashing another kernel, or revert back to stock rom
Yenkazu said:
No logs, no help
Just flashing another kernel, or revert back to stock rom
Click to expand...
Click to collapse
Or trying flash back the phone using SEUS (Sony Ericsson Update Service)
sent from My Robyn
madz13 said:
Or trying flash back the phone using SEUS (Sony Ericsson Update Service)
sent from My Robyn
Click to expand...
Click to collapse
i find this program, but my problem is that the usb port can't recocgnise the pnone, cause the phone bricked out! I think that now is without "bios" (if it was pc!). Can i somehow do something to wake the usb connection with the pc?? after that i can flash kernel and rom!
My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
mctf said:
My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
Click to expand...
Click to collapse
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
ChikeD said:
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
Click to expand...
Click to collapse
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Did you try to flash some other kernel?? And then try to enter CWM...
I think i found the way
RJ_ said:
Did you try to flash some other kernel?? And then try to enter CWM...
Click to expand...
Click to collapse
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
mctf said:
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
Click to expand...
Click to collapse
I know that is confusing but USB debug no need to be on to flash. Just flash ignore that msg
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
mctf said:
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Click to expand...
Click to collapse
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
ChikeD said:
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
Click to expand...
Click to collapse
The link is for locked bootloader. you do not need debugging mode for flashing a new kernel. Just put your phone in fastboot mode. and flash the kernel using cmd. then restart your phone. You will be able to enter CWM.
I FIX it
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
mctf said:
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
Click to expand...
Click to collapse
Now you must have the files, build your FTF.
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
martin132014 said:
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...
Sent from my C6833 using Tapatalk
blueether said:
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...[/QUOTE]
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
Click to expand...
Click to collapse
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
mathurmatt said:
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
Click to expand...
Click to collapse
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
G sound said:
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
Click to expand...
Click to collapse
Just flash 757 ftf not kernel..flash it with flashtool not recovery...it will restore your phone....then root it again...
Sent from my C6833 using Tapatalk
G sound said:
i dont know master...
Click to expand...
Click to collapse
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
LordManhattan said:
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Yes master...:good:
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but before I got stuck...
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but right now I got stuck...
Jammol said:
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
Click to expand...
Click to collapse
I can't download it... It say invalid argument...
G sound said:
I can't download it... It say invalid argument...
Click to expand...
Click to collapse
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
blueether said:
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
Click to expand...
Click to collapse
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Thanks again to all of you masters...
G sound said:
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Don't forget to backup you TA PARTITION before you unlock your device,
If you need any help PM me ill be glad to help
Click to expand...
Click to collapse
So, here is the .84 firmware with -86 baseband for the GSM Xperia Play.
From what I see, there are a few firmware changes since .79 firmware and a baseband update. Also, some applications like the Browser and the Phonebook seem to have some changes.
Download: R800i_4.0.2.A.0.84_Vodafone_DE_(1247-8566).ftf
How to Root:
1 - Download All 3 files from this Repository: .84 Firmware Rook Kit
2 - Flash R800i_.79_Kernel.ftf using Flashtools
3 - Root Phone using Eroot1.3.5.exe Tool
4 - Flash R800i_.84_Kernel.ftf using Flashtools
4 - Enjoy your .84 Rooted Firmware!
Thank you all!
Nice Man... Thanks
Sent from my R800a using XDA Free mobile app
appreciated!
I am sorry to ask, but how do I install this? I am a novice. the last update I booted in recovery and installed the zip. this is a ftf file and don't know how to install.
thank you.
legacygt777 said:
appreciated!
I am sorry to ask, but how do I install this? I am a novice. the last update I booted in recovery and installed the zip. this is a ftf file and don't know how to install.
thank you.
Click to expand...
Click to collapse
you need to flash it Via app called flashtool on windows
fliperpl said:
you need to flash it Via app called flashtool on windows
Click to expand...
Click to collapse
so I got the flashtool loaded on my pc. I put the firmware in the folder. installed the drivers from the flashtools. when it gets to the point where it says for me to unplug and power off the device, it says there's an error and that I need to install drivers.
can someone help? thanks
legacygt777 said:
so I got the flashtool loaded on my pc. I put the firmware in the folder. installed the drivers from the flashtools. when it gets to the point where it says for me to unplug and power off the device, it says there's an error and that I need to install drivers.
can someone help? thanks
Click to expand...
Click to collapse
install flash mode fastboot,xperia play, drivers from C:\flashtool\drivers
fliperpl said:
install flash mode fastboot,xperia play, drivers from C:\flashtool\drivers
Click to expand...
Click to collapse
I installed flash tool 64
I clicked on flash icon
clicked on flashboot mode
"xperia play" I don't see this?
Tutorial...
legacygt777 said:
I installed flash tool 64
I clicked on flash icon
clicked on flashboot mode
"xperia play" I don't see this?
Click to expand...
Click to collapse
How to say hmmmm.... I make some screen shot
1) go to flashtool folder-->drivers--> click to FlashTool-drivers.exe not rar...
2)
thats all
Back on topic, is this any different from the other 8X version? I think its name was "Docomo".
Frutak said:
How to say hmmmm.... I make some screen shot
1) go to flashtool folder-->drivers--> click to FlashTool-drivers.exe not rar...
2)
thats all
Click to expand...
Click to collapse
thanks for the details and patience. don't know what happened but the whole processed put me back on stock factory from the beginning. lol such a noob on this. oh well.
Toasty Clown said:
Back on topic, is this any different from the other 8X version? I think its name was "Docomo".
Click to expand...
Click to collapse
Docomo Fw: 4.0.1.C.0.86
This Fw: 4.0.2.A.0.84
This Firmware is newer, it has some diferente apps, and baseband changes
does anyone know how to root this new fw?
pipyakas said:
does anyone know how to root this new fw?
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showthread.php?p=40431122
Cant root the firmware... with this tool ( http://forum.xda-developers.com/showthread.php?p=40431122 )
flow27 said:
Cant root the firmware... with this tool ( http://forum.xda-developers.com/showthread.php?p=40431122 )
Click to expand...
Click to collapse
I have used this:http://forum.xda-developers.com/showthread.php?t=2054504
Method 2 ) its working, but you must change kernel from stock to--> (Lupus, doomkernel)
I could not root my 800at phone with this firmware. I am on a locked bootloader/stock kernel. ive used 2 programs to root.
try to flash .79 kernel, then root, then flash .84 kernel again, it might work.
Added Root Method to first post!
I found i file call rootxperia.zip, flashed it nthrough cwm and it worked
However, i got my flex cable mal functioned, so im saying goodbye to xpkay soon since in my place there is no way to fix it
pipyakas said:
I found i file call rootxperia.zip, flashed it nthrough cwm and it worked
However, i got my flex cable mal functioned, so im saying goodbye to xpkay soon since in my place there is no way to fix it
Click to expand...
Click to collapse
I know it works, but you need to unlock the bootloader to do it that way