My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
mctf said:
My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
Click to expand...
Click to collapse
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
ChikeD said:
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
Click to expand...
Click to collapse
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Did you try to flash some other kernel?? And then try to enter CWM...
I think i found the way
RJ_ said:
Did you try to flash some other kernel?? And then try to enter CWM...
Click to expand...
Click to collapse
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
mctf said:
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
Click to expand...
Click to collapse
I know that is confusing but USB debug no need to be on to flash. Just flash ignore that msg
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
mctf said:
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Click to expand...
Click to collapse
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
ChikeD said:
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
Click to expand...
Click to collapse
The link is for locked bootloader. you do not need debugging mode for flashing a new kernel. Just put your phone in fastboot mode. and flash the kernel using cmd. then restart your phone. You will be able to enter CWM.
I FIX it
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
mctf said:
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
Click to expand...
Click to collapse
Now you must have the files, build your FTF.
Related
I have x10 mini.....
bootloader unlocked
flashed [KERNEL] nAa-ICS-02
I can flash any kernel.....then I can flash any rom....(Cm9 I want ))
but rom never boot never started.....when I open the phone appeas the logo of kernel and then restart the phone...and I can't remove baterry..
wipe all data, cache, dalvik-cache .....I did it all the times
Also stock kernel with 2.1 original min x10's android don't run...the same problem...Appears logo of sony ericsson and restart...Someone here said that may be in a different baseband...The phone I bought from Vodafone store.....
Seus can't recognise my phone so I can't do a repair...What can I do?
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?
SmG67 said:
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?[/Q
I connect the phone and then I see a message:
In your phone is already installed the latest available software
Click to expand...
Click to collapse
mynick13 said:
SmG67 said:
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?[/Q
I connect the phone and then I see a message:
In your phone is already installed the latest available software
Click to expand...
Click to collapse
Leave your phone unplugged from the computer when you ask SEUS to search for an update. Since it won't recognise the phone it won't find any updates and assume your phone it broken, so it will give you a repair link.
Click on it, and follow the steps.
Click to expand...
Click to collapse
SmG67 said:
mynick13 said:
Leave your phone unplugged from the computer when you ask SEUS to search for an update. Since it won't recognise the phone it won't find any updates and assume your phone it broken, so it will give you a repair link.
Click on it, and follow the steps.
Click to expand...
Click to collapse
I can't do it in seus....it recognise phone and says no updates necessary ..
With Pc companion I can get into repair but loading and then a message:
server is too busy
Click to expand...
Click to collapse
mynick13 said:
I can't do it in seus....it recognise phone and says no updates necessary ..
With Pc companion I can get into repair but loading and then a message:
server is too busy
Click to expand...
Click to collapse
Take the back off your phone and post the two lines underneath the second barcode please Maybe i've got a solution.
SmG67 said:
Take the back off your phone and post the two lines underneath the second barcode please Maybe i've got a solution.
Click to expand...
Click to collapse
Here is all of the back of the phone with buttery characteristics
Thank you
This is stock firmware for the E10i for flashtool, move it to the firmwares folder and flash it like you would flash a kernel.
It's 2.1.1.A.0.6, baseband *4015, with a loader.sin for unlocked bootloader.
Let me know if your phone works after flashing this.
SmG67 said:
Thank you
This is stock firmware for the E10i for flashtool, move it to the firmwares folder and flash it like you would flash a kernel.
It's 2.1.1.A.0.6, baseband *4015, with a loader.sin for unlocked bootloader.
Let me know if your phone works after flashing this.
Click to expand...
Click to collapse
I'ts working!!!!!!!!!!!!!!!!!! thanks very much.....and then I flash E10_nAa-ics-03_2.6.29.6-nAa-ics-03 and any rom I want......:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::laugh::laugh::laugh::laugh::laugh:
Thnks very much.....What was the problem???
mynick13 said:
I'ts working!!!!!!!!!!!!!!!!!! thanks very much.....and then I flash E10_nAa-ics-03_2.6.29.6-nAa-ics-03 and any rom I want......:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::laugh::laugh::laugh::laugh::laugh:
Thnks very much.....What was the problem???
Click to expand...
Click to collapse
Don't know, I think you did something wrong somewhere, but glad it helped.
On the ICS kernel, only flash ICS-roms that state they need that kernel.
If you want Gingerbread, flash the nAa-GB kernel.
SmG67 said:
Don't know, I think you did something wrong somewhere, but glad it helped.
On the ICS kernel, only flash ICS-roms that state they need that kernel.
If you want Gingerbread, flash the nAa-GB kernel.
Click to expand...
Click to collapse
yes I know it....thanks
hey guys i need help. i bricked my phone while re-locking boot loader. what i did is i restored the boot loader while having custom kernel. i later realized that it should be done while having stock kernel.
now my mini is bricked and i cant flash stock kernel and even cant repair using pc companion or seus. its not even starting now , just initial vibration and green led blink at the time i try to power it on ,then it switches off .
is there any way to make the phone work..
help me guys
rathore_satyendra_singh said:
hey guys i need help. i bricked my phone while re-locking boot loader. what i did is i restored the boot loader while having custom kernel. i later realized that it should be done while having stock kernel.
now my mini is bricked and i cant flash stock kernel and even cant repair using pc companion or seus. its not even starting now , just initial vibration and green led blink at the time i try to power it on ,then it switches off .
is there any way to make the phone work..
help me guys
Click to expand...
Click to collapse
If it is off, you can put it in flash-mode, so how can you not repair it?
SmG67 said:
If it is off, you can put it in flash-mode, so how can you not repair it?
Click to expand...
Click to collapse
yes it is off . but now the boot loader is locked and it is on custom kernel (naa-14), that is why i cant flash stock kernel and without stock kernel seus or pc companion wont work. i have tried flashing stock kernel , flash tool even detects the phone but the kernel cant be flashed.
rathore_satyendra_singh said:
yes it is off . but now the boot loader is locked and it is on custom kernel (naa-14), that is why i cant flash stock kernel and without stock kernel seus or pc companion wont work.
Click to expand...
Click to collapse
ofcourse they will, for the repair option, they don't care what is on your phone... you select the model and they flash it...
SmG67 said:
ofcourse they will, for the repair option, they don't care what is on your phone... you select the model and they flash it...
Click to expand...
Click to collapse
i tried using both seus and pcc bt they say that " your phone is already up to date " and "no new software is available for your phone"
rathore_satyendra_singh said:
i tried using both seus and pcc bt they say that " your phone is already up to date " and "no new software is available for your phone"
Click to expand...
Click to collapse
you get that with an attempt to update, not with a repair...
update with your phone DIS-connected from your pc...
it can't update and give you a repair option...
follow instructions from there...
SmG67 said:
you get that with an attempt to update, not with a repair...
update with your phone DIS-connected from your pc...
it can't update and give you a repair option...
follow instructions from there...
Click to expand...
Click to collapse
yes brother i have even tried the repair option but still nothing happned.
does this have anything to do with pcc version? i dont have the latest one.
rathore_satyendra_singh said:
yes brother i have even tried the repair option but still nothing happned.
does this have anything to do with pcc version? i dont have the latest one.
Click to expand...
Click to collapse
ok... you've got x10mini (e10i) without the keyboard right?
SmG67 said:
ok... you've got x10mini (e10i) without the keyboard right?
Click to expand...
Click to collapse
yes right.
rathore_satyendra_singh said:
yes right.
Click to expand...
Click to collapse
Download this
Flash with flashtool.
SmG67 said:
Download this
Flash with flashtool.
Click to expand...
Click to collapse
what is the size of this file. earlier it was showing 115 mb but it is still downloading after 115 mb.
SmG67 said:
Download this
Flash with flashtool.
Click to expand...
Click to collapse
thanks bro its done.. sucessfully flashed the kernel u provided and now the phone is updating through seus. :good:
rathore_satyendra_singh said:
thanks bro its done.. sucessfully flashed the kernel u provided and now the phone is updating through seus. :good:
Click to expand...
Click to collapse
Updating wasn't necessary It was already the complete 2.1.1.A.0.6 firmware from Sony (Kernel + Rom)
But glad it worked for you
SmG67 said:
Updating wasn't necessary It was already the complete 2.1.1.A.0.6 firmware from Sony (Kernel + Rom)
But glad it worked for you [/QUOTE ]
thanks a lot again, its great to have people like u on xda.. keep up the good work.:good:
Click to expand...
Click to collapse
After all forgive my english and i will appreciate every answer!
Yesterday i was installing a custom rom, eXperience Innovation (the ROM with JB). and there was no problems. all the process went well and the installation finished correctly. i followed all the process how it was described in the thread and reboot the phone. Here is where the problem begin first the system get stuck at the sony logo (for much more time than usually takes when you install a rom) so i reboot again the phone and now it doesn't start.
Actually when i push the power button the green led flashes and nothing else occurs. i just can connect it in flash mode and fastboot mode
I've tried to fix it with pc companion but it says that the phone has a custom software that can't be updated (sony error 2003)
then i tried to install a stock kernel with flash tool but it gets stuck in the process. i tried by flash mode and fastboot mode several times and with different kernels but it doesn't work.
by the way i can't access CWM.
Please any help will be appreciated!
aempires said:
After all forgive my english and i will appreciate every answer!
Yesterday i was installing a custom rom, eXperience Innovation (the ROM with JB). and there was no problems. all the process went well and the installation finished correctly. i followed all the process how it was described in the thread and reboot the phone. Here is where the problem begin first the system get stuck at the sony logo (for much more time than usually takes when you install a rom) so i reboot again the phone and now it doesn't start.
Actually when i push the power button the green led flashes and nothing else occurs. i just can connect it in flash mode and fastboot mode
I've tried to fix it with pc companion but it says that the phone has a custom software that can't be updated (sony error 2003)
then i tried to install a stock kernel with flash tool but it gets stuck in the process. i tried by flash mode and fastboot mode several times and with different kernels but it doesn't work.
by the way i can't access CWM.
Please any help will be appreciated!
Click to expand...
Click to collapse
Did you try to install stock rom since you can connect your phone on flashmode?
DaRk-L0rD said:
Did you try to install stock rom since you can connect your phone on flashmode?
Click to expand...
Click to collapse
yes, i tried several times but neither the process don't start or get stuck in the middle!
aempires said:
yes, i tried several times but neither the process don't start or get stuck in the middle!
Click to expand...
Click to collapse
You have unlocked bootloader, right mate?
Sola didn't get official jb update.
When you install jb for first time you have to wait till your phone boots properly. Could ask 15-30 minutes or even more. The key is to be patient.
DaRk-L0rD said:
You have unlocked bootloader, right mate?
Sola didn't get official jb update.
When you install jb for first time you have to wait till your phone boots properly. Could ask 15-30 minutes or even more. The key is to be patient.
Click to expand...
Click to collapse
yes the bootloader was unlocked and i wait almost 15 minutes. and you know what happens. there is any advice or help you can give me?
aempires said:
yes the bootloader was unlocked and i wait almost 15 minutes. and you know what happens. there is any advice or help you can give me?
Click to expand...
Click to collapse
The only advice i can give you for now is lock your bootloader and try repairing with sony pc companion.
Pc companion will not work on unlocked bootloader.
DaRk-L0rD said:
The only advice i can give you for now is lock your bootloader and try repairing with sony pc companion.
Pc companion will not work on unlocked bootloader.
Click to expand...
Click to collapse
I have tried to install a kernel for re lock bootloader. but it i couldn't install it. is there any other way?
aempires said:
I have tried to install a kernel for re lock bootloader. but it i couldn't install it. is there any other way?
Click to expand...
Click to collapse
I've successfully locked the bootloader as you said but when i connect it to pc companion it says that theres is no software update for my phone (i did it in the repair option)
aempires said:
I have tried to install a kernel for re lock bootloader. but it i couldn't install it. is there any other way?
Click to expand...
Click to collapse
It's not a kernel mate it's an ftf file. You have to flash it via flashmode not via fastboot mode.
here is the link: http://forum.xda-developers.com/showthread.php?t=1920189
DaRk-L0rD said:
It's not a kernel mate it's an ftf file. You have to flash it via flashmode not via fastboot mode.
here is the link: http://forum.xda-developers.com/showthread.php?t=1920189
Click to expand...
Click to collapse
OK, my mistake. but yes i did it by flash mode!
This is no hard brick. This is soft kernel brick. A hard brick is when you can't enter flash mode, and your phone is dead(cannot power on) you can get a hard brick if you are some crazy dev :-\ who constantly brick his phone lol
Sent from my LT22i using xda app-developers app
AndroidNoob69 said:
This is no hard brick. This is soft kernel brick. A hard brick is when you can't enter flash mode, and your phone is dead(cannot power on) you can get a hard brick if you are some crazy dev :-\ who constantly brick his phone lol
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
thanks for the that info!
aempires said:
OK, my mistake. but yes i did it by flash mode!
Click to expand...
Click to collapse
Did you get any error?
If no, means that your bootloader is now locked. Try installing again stock rom via flashmode or repair your phone using pc companion.
Don't remember where, a user told that had a similar issue with another device and solved it using this tool: http://developer.sonymobile.com/services/flash-tool/
Read the instructions on how to install and use this tool mate.
had similar issue. will try using those methods and see if work. thanks
aempires said:
After all forgive my english and i will appreciate every answer!
Yesterday i was installing a custom rom, eXperience Innovation (the ROM with JB). and there was no problems. all the process went well and the installation finished correctly. i followed all the process how it was described in the thread and reboot the phone. Here is where the problem begin first the system get stuck at the sony logo (for much more time than usually takes when you install a rom) so i reboot again the phone and now it doesn't start.
Actually when i push the power button the green led flashes and nothing else occurs. i just can connect it in flash mode and fastboot mode
I've tried to fix it with pc companion but it says that the phone has a custom software that can't be updated (sony error 2003)
then i tried to install a stock kernel with flash tool but it gets stuck in the process. i tried by flash mode and fastboot mode several times and with different kernels but it doesn't work.
by the way i can't access CWM.
Please any help will be appreciated!
Click to expand...
Click to collapse
happened to me this before with XU and Xsola, on sola i fix my phone as follows:
reboot on flashmode (vol down press)
re install the stock kernel .10 and next .54 via flashtool (u can found here) original post from (http://forum.xda-developers.com/showthread.php?t=2029756 @slackerzz)
install stock .54 ftf
this alwys work for my when my phone stuck at the sony logo for long time,
i hope help u if i help u plz hit thanks xD
DaRk-L0rD said:
Did you get any error?
If no, means that your bootloader is now locked. Try installing again stock rom via flashmode or repair your phone using pc companion.
Don't remember where, a user told that had a similar issue with another device and solved it using this tool: http://developer.sonymobile.com/services/flash-tool/
Read the instructions on how to install and use this tool mate.
Click to expand...
Click to collapse
Yes, when i re lock the bootloader i could finally install an stock kernel! now my phone is back! Thanks a lot!!!!
aempires said:
Yes, when i re lock the bootloader i could finally install an stock kernel! now my phone is back! Thanks a lot!!!!
Click to expand...
Click to collapse
Glad your phone is back to life!
Enjoy!
DaRk-L0rD said:
Glad your phone is back to life!
Enjoy!
Click to expand...
Click to collapse
I have to thank you for your help! but i came with other problem now. the phone is working, now i can root, instal kernel, roms, etc... But i have noticed that the phone doesn't sound or vibrates. if i use any headset i can hear everything but without that there is no sound or vibration. can you know what it could be? i've been looking but can't find any solution yet
xperia sola
aempires said:
Yes, when i re lock the bootloader i could finally install an stock kernel! now my phone is back! Thanks a lot!!!!
Click to expand...
Click to collapse
i was trying to install experience v2 custom rom and my device is sola. when i installing the custom rom my device got strucked. therefore i pressed vol + and power button. now my phone get struck at sony logo. i can't go to the clockwork mod recovery. i downloaded sony emma and tried.when i registering there it's not sending the registering link to my email address. what can i do for this. please help me
nthilina said:
i was trying to install experience v2 custom rom and my device is sola. when i installing the custom rom my device got strucked. therefore i pressed vol + and power button. now my phone get struck at sony logo. i can't go to the clockwork mod recovery. i downloaded sony emma and tried.when i registering there it's not sending the registering link to my email address. what can i do for this. please help me
Click to expand...
Click to collapse
Have you tried installing a custom rom with flash tool?
Hello guys. I have a sony xperia X10 mini and i tried to flash a custom rom(Jbean). First i use the "msm7227_semc" to unlock the bootloader and the the "flash tool" to flash the new kenel and rom. But something went wrong and now my phone is dead and cant recognised by usb port. Can someone give some help??
gouvits said:
Hello guys. I have a sony xperia X10 mini and i tried to flash a custom rom(Jbean). First i use the "msm7227_semc" to unlock the bootloader and the the "flash tool" to flash the new kenel and rom. But something went wrong and now my phone is dead and cant recognised by usb port. Can someone give some help??
Click to expand...
Click to collapse
What is the problem ?
You throwing your phone to the water ?
-_____-
Please be more specific, more the info you give, the more you get in return
After unlock bootloader, are your phone still alive or not ?
Yenkazu said:
What is the problem ?
You throwing your phone to the water ?
-_____-
Please be more specific, more the info you give, the more you get in return
After unlock bootloader, are your phone still alive or not ?
Click to expand...
Click to collapse
the phone is now dead! the battery was fully charged when i start the flashing procedure. When i use the flash tool to flash the new kernel (E10_2.6.32.61-nAa-06- and the E10i_JBMP-Release4 rom), suddenly the phone closed and till know its not responding! its dead and i cant connect via usb to my pc to flash a new memory,cause ist cant open!
gouvits said:
the phone is now dead! the battery was fully charged when i start the flashing procedure. When i use the flash tool to flash the new kernel (E10_2.6.32.61-nAa-06- and the E10i_JBMP-Release4 rom), suddenly the phone closed and till know its not responding! its dead and i cant connect via usb to my pc to flash a new memory,cause ist cant open!
Click to expand...
Click to collapse
So, you are flash kernel
And then flash rom via Flashtool ?
What I know, flashtool cannot flash rom.zip
And what flashtool log when you flash kernel ?
Please attach flashtool log here
I'll hazard a guess and think that the flashtool log will show he flashed the xt0blrelock.ftf instead of the nAa-kernel by accident...
SmG67 said:
I'll hazard a guess and think that the flashtool log will show he flashed the xt0blrelock.ftf instead of the nAa-kernel by accident...
Click to expand...
Click to collapse
We will see then
When log are here
XD
Yenkazu said:
We will see then
When log are here
XD
Click to expand...
Click to collapse
hmmm...the flashtool Log isn't saved automatically right? i can't find it unfortunatelly in my pc. I searched in "c:/flashtool", but i only found a saved log from a yesterday test. I think that i damaged the kernel in my phone. Is any way to connect now the phone with the pc??
gouvits said:
hmmm...the flashtool Log isn't saved automatically right? i can't find it unfortunatelly in my pc. I searched in "c:/flashtool", but i only found a saved log from a yesterday test. I think that i damaged the kernel in my phone. Is any way to connect now the phone with the pc??
Click to expand...
Click to collapse
No logs, no help
Just flashing another kernel, or revert back to stock rom
Yenkazu said:
No logs, no help
Just flashing another kernel, or revert back to stock rom
Click to expand...
Click to collapse
Or trying flash back the phone using SEUS (Sony Ericsson Update Service)
sent from My Robyn
madz13 said:
Or trying flash back the phone using SEUS (Sony Ericsson Update Service)
sent from My Robyn
Click to expand...
Click to collapse
i find this program, but my problem is that the usb port can't recocgnise the pnone, cause the phone bricked out! I think that now is without "bios" (if it was pc!). Can i somehow do something to wake the usb connection with the pc?? after that i can flash kernel and rom!
I flashed the firmware from here: http://forum.xda-developers.com/showthread.php?t=2030261
after I finished this happened: whenever I connect my cable it shows the red charging light, the screen stays black and I can't get into flashmode either, what do I do?
EDIT: After a little charging it got back to normal, sorry
But now I notice my 3G isn't working now, help
Do you have proper drivers installed if you can access cwm recovery and have a backup restore it. Else drain you battery completely and then fash the stock ftf back
I managed to reflash, reroot and restore stuff on my phone but now 3G doesn't seem to work, anyone knows how to fix this? thanks :>
arboy2 said:
I managed to reflash, reroot and restore stuff on my phone but now 3G doesn't seem to work, anyone knows how to fix this? thanks :>
Click to expand...
Click to collapse
Why this firmware and not update with SUS or PC Companion?
ChikeD said:
Why this firmware and not update with SUS or PC Companion?
Click to expand...
Click to collapse
Cause unlocked bootloader devices cannot be updated. it's a stock firmware from sony though
arboy2 said:
Cause unlocked bootloader devices cannot be updated. it's a stock firmware from sony though
Click to expand...
Click to collapse
Yes but maybe not the right one for you.
You can download the file with PCC, start updating and when if finish to download the files and ask to power off the phone, exit and build the FTF sile.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Or you can relock the BL.
ChikeD said:
Yes but maybe not the right one for you.
You can download the file with PCC, start updating and when if finish to download the files and ask to power off the phone, exit and build the FTF sile.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Or you can relock the BL.
Click to expand...
Click to collapse
I don't want to reinstall everything again.
I know what happened! at the first time install you need to connect to the internet and wait till your xperia downloads something called Internet & MMS Settings and it should work, it works now thanks everybody
arboy2 said:
I know what happened! at the first time install you need to connect to the internet and wait till your xperia downloads something called Internet & MMS Settings and it should work, it works now thanks everybody
Click to expand...
Click to collapse
LOL I had this last week, I normally skip this in the wizzrd but last time I didn't do a full restore and forgot to set it up.