Xperia sola brick! help! - Sony Xperia P, U, Sola, Go

I flashed the firmware from here: http://forum.xda-developers.com/showthread.php?t=2030261
after I finished this happened: whenever I connect my cable it shows the red charging light, the screen stays black and I can't get into flashmode either, what do I do?
EDIT: After a little charging it got back to normal, sorry
But now I notice my 3G isn't working now, help

Do you have proper drivers installed if you can access cwm recovery and have a backup restore it. Else drain you battery completely and then fash the stock ftf back

I managed to reflash, reroot and restore stuff on my phone but now 3G doesn't seem to work, anyone knows how to fix this? thanks :>

arboy2 said:
I managed to reflash, reroot and restore stuff on my phone but now 3G doesn't seem to work, anyone knows how to fix this? thanks :>
Click to expand...
Click to collapse
Why this firmware and not update with SUS or PC Companion?

ChikeD said:
Why this firmware and not update with SUS or PC Companion?
Click to expand...
Click to collapse
Cause unlocked bootloader devices cannot be updated. it's a stock firmware from sony though

arboy2 said:
Cause unlocked bootloader devices cannot be updated. it's a stock firmware from sony though
Click to expand...
Click to collapse
Yes but maybe not the right one for you.
You can download the file with PCC, start updating and when if finish to download the files and ask to power off the phone, exit and build the FTF sile.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Or you can relock the BL.

ChikeD said:
Yes but maybe not the right one for you.
You can download the file with PCC, start updating and when if finish to download the files and ask to power off the phone, exit and build the FTF sile.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Or you can relock the BL.
Click to expand...
Click to collapse
I don't want to reinstall everything again.

I know what happened! at the first time install you need to connect to the internet and wait till your xperia downloads something called Internet & MMS Settings and it should work, it works now thanks everybody

arboy2 said:
I know what happened! at the first time install you need to connect to the internet and wait till your xperia downloads something called Internet & MMS Settings and it should work, it works now thanks everybody
Click to expand...
Click to collapse
LOL I had this last week, I normally skip this in the wizzrd but last time I didn't do a full restore and forgot to set it up.

Related

Problem booting rom

I have x10 mini.....
bootloader unlocked
flashed [KERNEL] nAa-ICS-02
I can flash any kernel.....then I can flash any rom....(Cm9 I want ))
but rom never boot never started.....when I open the phone appeas the logo of kernel and then restart the phone...and I can't remove baterry..
wipe all data, cache, dalvik-cache .....I did it all the times
Also stock kernel with 2.1 original min x10's android don't run...the same problem...Appears logo of sony ericsson and restart...Someone here said that may be in a different baseband...The phone I bought from Vodafone store.....
Seus can't recognise my phone so I can't do a repair...What can I do?
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?
SmG67 said:
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?[/Q
I connect the phone and then I see a message:
In your phone is already installed the latest available software
Click to expand...
Click to collapse
mynick13 said:
SmG67 said:
How does SEUS nog recognise your phone? Can't it recognise your model or does it say no updates?[/Q
I connect the phone and then I see a message:
In your phone is already installed the latest available software
Click to expand...
Click to collapse
Leave your phone unplugged from the computer when you ask SEUS to search for an update. Since it won't recognise the phone it won't find any updates and assume your phone it broken, so it will give you a repair link.
Click on it, and follow the steps.
Click to expand...
Click to collapse
SmG67 said:
mynick13 said:
Leave your phone unplugged from the computer when you ask SEUS to search for an update. Since it won't recognise the phone it won't find any updates and assume your phone it broken, so it will give you a repair link.
Click on it, and follow the steps.
Click to expand...
Click to collapse
I can't do it in seus....it recognise phone and says no updates necessary ..
With Pc companion I can get into repair but loading and then a message:
server is too busy
Click to expand...
Click to collapse
mynick13 said:
I can't do it in seus....it recognise phone and says no updates necessary ..
With Pc companion I can get into repair but loading and then a message:
server is too busy
Click to expand...
Click to collapse
Take the back off your phone and post the two lines underneath the second barcode please Maybe i've got a solution.
SmG67 said:
Take the back off your phone and post the two lines underneath the second barcode please Maybe i've got a solution.
Click to expand...
Click to collapse
Here is all of the back of the phone with buttery characteristics
Thank you
This is stock firmware for the E10i for flashtool, move it to the firmwares folder and flash it like you would flash a kernel.
It's 2.1.1.A.0.6, baseband *4015, with a loader.sin for unlocked bootloader.
Let me know if your phone works after flashing this.
SmG67 said:
Thank you
This is stock firmware for the E10i for flashtool, move it to the firmwares folder and flash it like you would flash a kernel.
It's 2.1.1.A.0.6, baseband *4015, with a loader.sin for unlocked bootloader.
Let me know if your phone works after flashing this.
Click to expand...
Click to collapse
I'ts working!!!!!!!!!!!!!!!!!! thanks very much.....and then I flash E10_nAa-ics-03_2.6.29.6-nAa-ics-03 and any rom I want......:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::laugh::laugh::laugh::laugh::laugh:
Thnks very much.....What was the problem???
mynick13 said:
I'ts working!!!!!!!!!!!!!!!!!! thanks very much.....and then I flash E10_nAa-ics-03_2.6.29.6-nAa-ics-03 and any rom I want......:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::laugh::laugh::laugh::laugh::laugh:
Thnks very much.....What was the problem???
Click to expand...
Click to collapse
Don't know, I think you did something wrong somewhere, but glad it helped.
On the ICS kernel, only flash ICS-roms that state they need that kernel.
If you want Gingerbread, flash the nAa-GB kernel.
SmG67 said:
Don't know, I think you did something wrong somewhere, but glad it helped.
On the ICS kernel, only flash ICS-roms that state they need that kernel.
If you want Gingerbread, flash the nAa-GB kernel.
Click to expand...
Click to collapse
yes I know it....thanks

[Q] Bad rom flashing! Help!

Hello guys. I have a sony xperia X10 mini and i tried to flash a custom rom(Jbean). First i use the "msm7227_semc" to unlock the bootloader and the the "flash tool" to flash the new kenel and rom. But something went wrong and now my phone is dead and cant recognised by usb port. Can someone give some help??
gouvits said:
Hello guys. I have a sony xperia X10 mini and i tried to flash a custom rom(Jbean). First i use the "msm7227_semc" to unlock the bootloader and the the "flash tool" to flash the new kenel and rom. But something went wrong and now my phone is dead and cant recognised by usb port. Can someone give some help??
Click to expand...
Click to collapse
What is the problem ?
You throwing your phone to the water ?
-_____-
Please be more specific, more the info you give, the more you get in return
After unlock bootloader, are your phone still alive or not ?
Yenkazu said:
What is the problem ?
You throwing your phone to the water ?
-_____-
Please be more specific, more the info you give, the more you get in return
After unlock bootloader, are your phone still alive or not ?
Click to expand...
Click to collapse
the phone is now dead! the battery was fully charged when i start the flashing procedure. When i use the flash tool to flash the new kernel (E10_2.6.32.61-nAa-06- and the E10i_JBMP-Release4 rom), suddenly the phone closed and till know its not responding! its dead and i cant connect via usb to my pc to flash a new memory,cause ist cant open!
gouvits said:
the phone is now dead! the battery was fully charged when i start the flashing procedure. When i use the flash tool to flash the new kernel (E10_2.6.32.61-nAa-06- and the E10i_JBMP-Release4 rom), suddenly the phone closed and till know its not responding! its dead and i cant connect via usb to my pc to flash a new memory,cause ist cant open!
Click to expand...
Click to collapse
So, you are flash kernel
And then flash rom via Flashtool ?
What I know, flashtool cannot flash rom.zip
And what flashtool log when you flash kernel ?
Please attach flashtool log here
I'll hazard a guess and think that the flashtool log will show he flashed the xt0blrelock.ftf instead of the nAa-kernel by accident...
SmG67 said:
I'll hazard a guess and think that the flashtool log will show he flashed the xt0blrelock.ftf instead of the nAa-kernel by accident...
Click to expand...
Click to collapse
We will see then
When log are here
XD
Yenkazu said:
We will see then
When log are here
XD
Click to expand...
Click to collapse
hmmm...the flashtool Log isn't saved automatically right? i can't find it unfortunatelly in my pc. I searched in "c:/flashtool", but i only found a saved log from a yesterday test. I think that i damaged the kernel in my phone. Is any way to connect now the phone with the pc??
gouvits said:
hmmm...the flashtool Log isn't saved automatically right? i can't find it unfortunatelly in my pc. I searched in "c:/flashtool", but i only found a saved log from a yesterday test. I think that i damaged the kernel in my phone. Is any way to connect now the phone with the pc??
Click to expand...
Click to collapse
No logs, no help
Just flashing another kernel, or revert back to stock rom
Yenkazu said:
No logs, no help
Just flashing another kernel, or revert back to stock rom
Click to expand...
Click to collapse
Or trying flash back the phone using SEUS (Sony Ericsson Update Service)
sent from My Robyn
madz13 said:
Or trying flash back the phone using SEUS (Sony Ericsson Update Service)
sent from My Robyn
Click to expand...
Click to collapse
i find this program, but my problem is that the usb port can't recocgnise the pnone, cause the phone bricked out! I think that now is without "bios" (if it was pc!). Can i somehow do something to wake the usb connection with the pc?? after that i can flash kernel and rom!

PLEASE i need help my phone is broken . i am desperate.

My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
mctf said:
My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
Click to expand...
Click to collapse
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
ChikeD said:
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
Click to expand...
Click to collapse
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Did you try to flash some other kernel?? And then try to enter CWM...
I think i found the way
RJ_ said:
Did you try to flash some other kernel?? And then try to enter CWM...
Click to expand...
Click to collapse
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
mctf said:
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
Click to expand...
Click to collapse
I know that is confusing but USB debug no need to be on to flash. Just flash ignore that msg
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
mctf said:
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Click to expand...
Click to collapse
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
ChikeD said:
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
Click to expand...
Click to collapse
The link is for locked bootloader. you do not need debugging mode for flashing a new kernel. Just put your phone in fastboot mode. and flash the kernel using cmd. then restart your phone. You will be able to enter CWM.
I FIX it
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
mctf said:
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
Click to expand...
Click to collapse
Now you must have the files, build your FTF.

[Q] After rooting xperia p, cannot make call. It goes restarting when making a call

After rooting xperia p, cannot make call. It goes restarting when making a call. Its restarting frequently and boot is not completed. The screen is just flashing with the start up logo. What I have to do next?? I'm beginner in rooting.
Sony Xperia P
Jelly bean 4.1.2
build 6.2.A.0.400
silantharakans said:
After rooting xperia p, cannot make call. It goes restarting when making a call. Its restarting frequently and boot is not completed. The screen is just flashing with the start up logo. What I have to do next?? I'm beginner in rooting.
Sony Xperia P
Jelly bean 4.1.2
build 6.2.A.0.400
Click to expand...
Click to collapse
AFAIK 6.2.A.0.400 cannot be rooted, so tell exactly what you have done, provide links if you can, and if you can't the title of the article or post that is easy to search.
phone not working
ChikeD said:
AFAIK 6.2.A.0.400 cannot be rooted, so tell exactly what you have done, provide links if you can, and if you can't the title of the article or post that is easy to search.
Click to expand...
Click to collapse
I used the link below to root my phone.
http://forum.xda-developers.com/showthread.php?t=2298682
while dialing a number and making call, the get restarted
ChikeD said:
AFAIK 6.2.A.0.400 cannot be rooted, so tell exactly what you have done, provide links if you can, and if you can't the title of the article or post that is easy to search.
Click to expand...
Click to collapse
while dialing and making a call, the phone get restarted. Pls help me immediately
Pls help me
pls help me. I am waiting for your help.
silantharakans said:
I used the link below to root my phone.
http://forum.xda-developers.com/showthread.php?t=2298682
Click to expand...
Click to collapse
If you have FTF file for your firmware flash the kernel of it, clear all wipes, exclude everything but the kernel so what is left in content list is only kernel.sin and maybe loader.sin too.
I am beginner, where can i get ftf file??
ChikeD said:
If you have FTF file for your firmware flash the kernel of it, clear all wipes, exclude everything but the kernel so what is left in content list is only kernel.sin and maybe loader.sin too.
Click to expand...
Click to collapse
I am a beginner. where can i get ftf file? could you please send me the steps that i have to follow
silantharakans said:
I am a beginner. where can i get ftf file? could you please send me the steps that i have to follow
Click to expand...
Click to collapse
You can search for it, one for youe firmware version, however I recommend you build one yourself.
Do you have PC Companion, and do you have the latest firmware version for your region?
Do not start update if PC Companion ask you to, make a full backup before update.
Pls help me
ChikeD said:
You can search for it, one for youe firmware version, however I recommend you build one yourself.
Do you have PC Companion, and do you have the latest firmware version for your region?
Do not start update if PC Companion ask you to, make a full backup before update.
Click to expand...
Click to collapse
I have pc companion in my system. But I don't have the latest firmware version and firmware with me. I am from India. Where can get it? Can I use pc companion to solve the problem. I have already rooted the phone. Will pc companion make any change in rooting??
silantharakans said:
I have pc companion in my system. But I don't have the latest firmware version and firmware with me. I am from India. Where can get it? Can I use pc companion to solve the problem. I have already rooted the phone. Will pc companion make any change in rooting??
Click to expand...
Click to collapse
I mean if you open PC Companion while your phone is connected, does it tell you a new version is available, or if you go to support zone, update it tell you you already have latest version?
Yes, you can use PC Companion to build the FTF file, just answer first.
ChikeD said:
I mean if you open PC Companion while your phone is connected, does it tell you a new version is available, or if you go to support zone, update it tell you you already have latest version?
Yes, you can use PC Companion to build the FTF file, just answer first.
Click to expand...
Click to collapse
I connected my phone with pc companion now. But it shows the software is update. What can I do now?
silantharakans said:
I connected my phone with pc companion now. But it shows the software is update. What can I do now?
Click to expand...
Click to collapse
Now click support zone, click update, click repair, and wait till it finish downloading files and ask you to turn the phone off and connect in flash mode.
Close PC COmpanion and build FTF file with flashtool as show in one of the guides:
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Next flash the kernel only, start flash in flashtool, choose flash mode, select the file you made, clear all wipes, exclude everything but the kernel.
You should have only kernel.sin and loader.sin in content list, now flash.
Hopefully with the original kernel your problem will be solved.
How to Create FTF file? sony update service is not available since unlocked the phone
ChikeD said:
Now click support zone, click update, click repair, and wait till it finish downloading files and ask you to turn the phone off and connect in flash mode.
Close PC COmpanion and build FTF file with flashtool as show in one of the guides:
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Next flash the kernel only, start flash in flashtool, choose flash mode, select the file you made, clear all wipes, exclude everything but the kernel.
You should have only kernel.sin and loader.sin in content list, now flash.
Hopefully with the original kernel your problem will be solved.
Click to expand...
Click to collapse
I tried to create FTF, but failed. When I tried to repair using PC companion, it showed that Sony update service is not available to the phone and the phone is having some updated softwares. So I couldn't repair the kernel and thus failed to create FTF file.
At last, I found the problem with the phone. The problem was with proximity sensor. While making a call, when the phone is kept close to ear, the phone shows the problem and it restarts and boot loop is occurred. I found the solution for it also.
1) make the call using ear phone.
or
2) make the call with speaker phone.
Then no problem.
Today morning, I checked the phone once more. Now it is working perfectly. I have done nothing other than this.
Thank you very much for immense support and the help. Please help me to create FTF file for my phone. Could you please tell me, other step by step procedure for it as I am a beginner in this area.
silantharakans said:
I tried to create FTF, but failed. When I tried to repair using PC companion, it showed that Sony update service is not available to the phone and the phone is having some updated softwares. So I couldn't repair the kernel and thus failed to create FTF file.
At last, I found the problem with the phone. The problem was with proximity sensor. While making a call, when the phone is kept close to ear, the phone shows the problem and it restarts and boot loop is occurred. I found the solution for it also.
1) make the call using ear phone.
or
2) make the call with speaker phone.
Then no problem.
Today morning, I checked the phone once more. Now it is working perfectly. I have done nothing other than this.
Thank you very much for immense support and the help. Please help me to create FTF file for my phone. Could you please tell me, other step by step procedure for it as I am a beginner in this area.
Click to expand...
Click to collapse
Was the phone on nd connected to the PC when you attempted repair, or did you have to choose which phone to repair from a list?
It's weird update is not available.
Is your bootloader locked or unlocked?
Problem solved
1. Start your phone in CWM Recovery
2. Go to Advanced
3. Choose "Wipe dalvik-cache"
4. Now go to "Mounts & Storage"
5. Choose "Wipe /cache"
6. Reboot your phone
if the problems still exists after doing that and you're sure it's not related to the rom, then you need to do this:
1. Start your phone in CWM Recovery
2. Now go to "Mounts & Storage"
3. Choose "Wipe /data"
4. Choose "Wipe /cache"
5. Reboot your phone

[Q] Xperia Sola - Can't restore to stock ROM

Good evening lads and lasses,
I've encountered a rather unusual issue. I am currently running CM11 4.4.2 by Munjeni on my Sola, but that's not the main focus of my problem.
Here's the story:
My girlfriend's brother needed a phone ASAP, just for a few days. I was using an iPhone at the time (yes, I know), so I was like, sure, he could have it for the time being. When I got it back, I noticed PC Companion was unable to detect any supported firmware on the phone, and could not restore or update anything (I was on the .10 ROM at the time, with .54 available). Flashtool has given me the following error ever since:
Error in processHeader: 1 : Incorrect Function
(On pretty much all versions of FlashTool, since 9.8.0)
I've verified that all of the correct drivers have been installed, and flashing kernels with fastboot still works fine. I can't flash the original ICS or GB ROMs though, and I'm stumped. I love CM, but if I buy an other phone, I want to either restore and sell this one, or restore it for use as a 2nd phone when that happens.
So, any ideas on how to proceed? It seems flashtool is out of the question to get these FTFs back on my Sola.
Extra info:
Tested on Windows 7 x64 and Windows Server 2008R2
Could be the firmware file is corrupted, try to verify with 7-Zip or other compression utility.
If you have used PC Companion with your phone before you can start repair, that will load the files and does not require the phone to be connected at all.
Once download is complete, and PCC ask you to connect in flash mode, stop it and build FTF with flashtool.
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
http://forum.xda-developers.com/showthread.php?t=2188129
ChikeD said:
Could be the firmware file is corrupted, try to verify with 7-Zip or other compression utility.
If you have used PC Companion with your phone before you can start repair, that will load the files and does not require the phone to be connected at all.
Once download is complete, and PCC ask you to connect in flash mode, stop it and build FTF with flashtool.
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
http://forum.xda-developers.com/showthread.php?t=2188129
Click to expand...
Click to collapse
Thank you for your reply.
I will try those proceduree as soon as possible, and I will report my findings.
NelizMastr said:
Thank you for your reply.
I will try those proceduree as soon as possible, and I will report my findings.
Click to expand...
Click to collapse
Reporting back:
I have been unable to restore my phone with the PC Companion. After some research, it has become clear that I can't restore using PCC, since my bootloader is unlocked, which isn't relockable at this point. Are there other ways to restore the phone without any existing backups? I haven't gotten around to backup the phone before it was ruined in this particular way.
The firmware files are solid, by the way.
I'd like to point this out:
Flashtool is out of the question, and so is PCC. Both programs refuse to flash this phone. Internal flashing with CWM works perfectly.
NelizMastr said:
Reporting back:
I have been unable to restore my phone with the PC Companion. After some research, it has become clear that I can't restore using PCC, since my bootloader is unlocked, which isn't relockable at this point. Are there other ways to restore the phone without any existing backups? I haven't gotten around to backup the phone before it was ruined in this particular way.
The firmware files are solid, by the way.
I'd like to point this out:
Flashtool is out of the question, and so is PCC. Both programs refuse to flash this phone. Internal flashing with CWM works perfectly.
Click to expand...
Click to collapse
Where in my post have I said restore with PCC?
Read what I wrote carefully, follow those steps to build your own FTF to flash with flashtool.
As I've said, it is only valid if you have used the phone with PCC before and it does not neet it to be connected to repair it.
EDIT: BTW which file fails the flash with flashtool?
ChikeD said:
Where in my post have I said restore with PCC?
Read what I wrote carefully, follow those steps to build your own FTF to flash with flashtool.
As I've said, it is only valid if you have used the phone with PCC before and it does not neet it to be connected to repair it.
EDIT: BTW which file fails the flash with flashtool?
Click to expand...
Click to collapse
How is making an FTF from my current firmware going to help me? I don't want a backup of my current firmware, since I'm on Cyanogenmod.
I'll dig into it deeper, to see if I missed something, then.
Any FTF I try to flash fails with the error mentioned before:
Error in processHeader: 1 : Incorrect Function
I have been unable to bypass this error, thus have I been unable to restore using FTF files.
EDIT:
My phone can't do the things mentioned in the links for the following reasons:
I can't back up using PCC because I'm not on Sony firmware (I can't flash that, that's why this topic exists), so I can't make am FTF based on that.
I can't make my own FTF because it requires a locked bootloader. Mine is unlocked and can't be relocked currently, as far as I'm aware, which is an important requirement for that guide.
Hopefully you understand which problems I'm facing. I'm 99% stuck now, since neither PCC nor Flashtool appear to be working for me. The Sony Update Service doesn't support the Xperia Sola so that's a no too.
Have you flashed with flashtool with the PC you are using now and the same OS?
Open flashtool, connect phone in flash mode, see if it stays connected for about 45 seconds.
ChikeD said:
Have you flashed with flashtool with the PC you are using now and the same OS?
Open flashtool, connect phone in flash mode, see if it stays connected for about 45 seconds.
Click to expand...
Click to collapse
Sorry for the late reply. I've been rather busy this week,
It does stay in flash mode for 45 seconds, yes. The PC in question is the same as when I performed the first attempt back in the day (this occured a few months ago), not the same OS though. However, I have tested this on my laptop with Windows 7, as well as my desktop with Server 2008R2, but both yield the same results.
Any thoughts? Should I try that dinosaur called Winblows XP? Or would you suggest something else?
Thanks in advance.
NelizMastr said:
Sorry for the late reply. I've been rather busy this week,
It does stay in flash mode for 45 seconds, yes. The PC in question is the same as when I performed the first attempt back in the day (this occured a few months ago), not the same OS though. However, I have tested this on my laptop with Windows 7, as well as my desktop with Server 2008R2, but both yield the same results.
Any thoughts? Should I try that dinosaur called Winblows XP? Or would you suggest something else?
Thanks in advance.
Click to expand...
Click to collapse
So it seems there no problem with flash mode drivers.
Now open PCC, click start under support zone. click start under update phone/tablet software, click repair, continue untill if finish downloading files, exit, build FTF as described in one of the links, your files are ready, start from there.
ChikeD said:
So it seems there no problem with flash mode drivers.
Now open PCC, click start under support zone. click start under update phone/tablet software, click repair, continue untill if finish downloading files, exit, build FTF as described in one of the links, your files are ready, start from there.
Click to expand...
Click to collapse
I can't update/restore with PCC. It gives me an error that there is no software available, so it won't even bother to download files to create an FTF from. In order to use PCC, I need to have stock or stock based firmware on the phone. As soon as I attempt to flash a stock kernel + stock ROM using fastboot.exe on my pc, and CWM on the phone itself, I end up with a bricked device.
I'll try this once more once I get the chance, later today, to see if I can dig up some other results.
I suppose this is a tough one you don't see very often, here on XDA
NelizMastr said:
I can't update/restore with PCC. It gives me an error that there is no software available, so it won't even bother to download files to create an FTF from. In order to use PCC, I need to have stock or stock based firmware on the phone. As soon as I attempt to flash a stock kernel + stock ROM using fastboot.exe on my pc, and CWM on the phone itself, I end up with a bricked device.
I'll try this once more once I get the chance, later today, to see if I can dig up some other results.
I suppose this is a tough one you don't see very often, here on XDA
Click to expand...
Click to collapse
Did you follow the steps I posted exactly? The phone don't even need to be connected.
ChikeD said:
Did you follow the steps I posted exactly? The phone don't even need to be connected.
Click to expand...
Click to collapse
Yes I did. If I check the blob_fs folder, I only get icon files, with a maximum file size of 10KB. It doesn't download anything when I follow your guide. When I remove the folder, it simply redownloads the images, but not the files required for the FTF.
As a reminder concerning the SEUS: No Sola support, at all, so no firmwares from there either.
NelizMastr said:
Yes I did. If I check the blob_fs folder, I only get icon files, with a maximum file size of 10KB. It doesn't download anything when I follow your guide. When I remove the folder, it simply redownloads the images, but not the files required for the FTF.
As a reminder concerning the SEUS: No Sola support, at all, so no firmwares from there either.
Click to expand...
Click to collapse
After you click repair, what happens?
ChikeD said:
After you click repair, what happens?
Click to expand...
Click to collapse
Once I click repair, I get a ****load (pardon my French) of dialog boxes with check boxes to make sure I agree to continue with the repair.When that is done, it starts preparing the phone (not even selected which one) firmware, after I select the Xperia Sola, nothing happens. It just asks me to connect the phone.
NelizMastr said:
Once I click repair, I get a ****load (pardon my French) of dialog boxes with check boxes to make sure I agree to continue with the repair.When that is done, it starts preparing the phone (not even selected which one) firmware, after I select the Xperia Sola, nothing happens. It just asks me to connect the phone.
Click to expand...
Click to collapse
Well you have said you have used it before with this phone, case which it su\ould ask you if to repair the phone you have used with it before or choose another. and if you choose phone you have used before it would download the files without asking to connect it.
I am guessing it would refuse to repair phone with unlocked bootloader, but have you connected the phone in flash mode?
ChikeD said:
Well you have said you have used it before with this phone, case which it su\ould ask you if to repair the phone you have used with it before or choose another. and if you choose phone you have used before it would download the files without asking to connect it.
I am guessing it would refuse to repair phone with unlocked bootloader, but have you connected the phone in flash mode?
Click to expand...
Click to collapse
Why would I connect it in flash mode? (And yes, it did show up, and I did select it, but that didn't change anything) Still, I have connected it in flash mode before, and all it says is: Nope, unsupported phone and such. I'll have to reboot to Winblows again and see what I can dig up...
NelizMastr said:
Why would I connect it in flash mode? (And yes, it did show up, and I did select it, but that didn't change anything) Still, I have connected it in flash mode before, and all it says is: Nope, unsupported phone and such. I'll have to reboot to Winblows again and see what I can dig up...
Click to expand...
Click to collapse
Such an annoyance that I can't post external links, and the fact that all my software is Dutch, so I can only provide crappy translations of the errors I receive
I connected the phone is flash mode, I received an error that boils down to the following:
"The phone contains modified software which cannot be updated" and that's where the adventure with PCC ends.
NelizMastr said:
Such an annoyance that I can't post external links, and the fact that all my software is Dutch, so I can only provide crappy translations of the errors I receive
I connected the phone is flash mode, I received an error that boils down to the following:
"The phone contains modified software which cannot be updated" and that's where the adventure with PCC ends.
Click to expand...
Click to collapse
Yes, that because the unlocked bootloader, you can try and see if there is a way to relock it, make sure it's a proven one.
Did you back up your ta before unlocking bootloader?
ChikeD said:
Yes, that because the unlocked bootloader, you can try and see if there is a way to relock it, make sure it's a proven one.
Did you back up your ta before unlocking bootloader?
Click to expand...
Click to collapse
Boy do I feel like a moron. I tried the 32-bit version of Flashtool, just for the heck of it, and I successfully flashed the stock .54 ROM. It is booting as we speak. I have no clue why Flashtool64 would behave differently to regular 32-bit Flashtool, but well, my phone is back on stock, with unlocked bootloader.
Thanks for your help to this point. I will definitely give you a big thumbs up for your suggestions
Interesting, might be drivers issue.

Categories

Resources