hello all
ive looked at all the threads for this already, and have checked energyroms through and through and im stumped, i have the sprint cdma touch pro (raph800) and cannot for the life of me find a copy of energyrom maxsense 29007 for the cdma touch pro. im currently running the 23xxx build and would love to update, and i see that the gsm version (raphael) has the 29007 build but we dont. anyone care to answer? is there a way to hack up the raphael build for my cdma device without bricking the radio? (im sure there is im just not sure where to start) if i figure this out ill be sure to pass the good news along.
Don't suppose you've checked the other site where NRG posts his ROMs for CDMA?
PPCGEEKS (I think)
Though it is possible that NRG has taken them down for an update?
ive used that rom on my sprint tp without problem. didnt get it from here though, ill post a link in a sec to the forum in which i got it. you wont brick it, just have task29 and the latest radio handy if anything goes wrong.
The rom is here: http://forum.ppcgeeks.com/cdma-tp-d...nergy-6-5-21916-6-5-x-29007-sense-2019-a.html
look at the second post
Ive tried all these roms on my sprint tp and they work great. Be sure to task29! Otherwise you may end up with issues. Im currently using the Dinik Glass, and tethering on my TP to post this as we speak.
These are for the CDMA HTC Touch Pro
hey thanks for the links, i still cant find anything for maxsense, lol when i go to the hotfile link nrg provides all i find is the other variants, but no maxsense. i think im going to download the raph maxsense version and see if i can poke around, hopefully something i can figure out will help me port this to the cdma side
Additionally, if you don't mind a CAB, look HERE for the post attachment!
thanks r 7z ive been looking for something like that, ill give it a try
Related
Ok, I've searched this site/Google/and 2 other pocketpc forums but I'm running out of time...
My friend was kind enough to let me borrow and testdrive his 8525 that he doesn't use anymore. If I like it and can get it to work on T Mobile, I can buy it...if not, he'll take it back and sale it. Great deal huh?
I've got to make a decision by tomorrow, I've managed to
unlock the device
FINALLY flashed a radio version that seems to work (took 6 tries)
upgraded the ROM
Question: Is there a T Mobile ROM that I can flash that will give me the T Mobile apps/wallpaper/etc? If so PLS post the link. I've found different links that look possible, just nothing that's spelled out in plain English for a noob such as myself. Also, as far as enabling MMS/Picture Messaging, is it just a matter of replacing the AT&T connection settings with the T Mobile settings?
Sorry for the simple question, I'm just out of time.
WM5
ROM 2.15.502.3
Radio 1.47.00.10
Protocol 32.80.7020.20H
Ant T-Mob ROM that's not been adjusted or recooked should have all the T-Mob apps and settngs in, inc internet and wallpapers.
Just search the Hermes forum, thread titles only, for t-mob or t-mobile.
As far as enabling MMS etc, the new ROM will do that. If you want to do it seperately, there is a thread somewhere with cabs posted for just about every country and carrier. Was a while ago but a search'll find it.
Sorry I can't just provide the links but I don't use T-Mob.
These are official WM6 Tmo roms:
http://forum.xda-developers.com/showthread.php?t=337163
I've flashed the UK one, but skipped the tmo-customisation. Its running unbelievable fast!
thank you
thank you much!
I've searched with just about every form of "T-Mobile" I could think of...the results were just a bit confusing. I think searching thread title only would've helped. :-}
I also wasn't certain that the UK Tmo rom was universal as I'm located in the States, but I think you've answered the question. I'll give it a shot...
Check the sticky about HardSPL in this forum. That will alow you to flash any ROM.
THANK YOU!
Got it...did it...now I'm running WM6 T Mobile (from the UK link)
Just have to figure out how to fix the keyboard without having to mess with the registry (a little over my head), now, back to Searching...
**THIS IS NOT A NOOB QUESTION, IM NOT ASKING HOW TO INSTALL THIS, OR ANYTHING OF THAT NATURE!! SO PLEASE DON'T BLOW IT OFF LIKE IT'S A STRAIGHT NOOB ?? THAT WILL TAKE DAYS TO EXPLAIN**
Hey guys, Tweak here. Guess what. Just bought a Titan. I've been running my faithful Vogue for the past year, but with my new business opening up, I really need the WifiRouter , which I have to recommend! BUT I NEED YOU HELP!!! PLEASE!!!
I want to use the BuilOS PPCgeeks Kitchen to install a custom ROM on my new Titan (of course) , but I am so caught up in the Vogue world, that I am lost over here in Titan land.
All I need to know is where to find a good ROM , preferably Alltel ROM, but pretty much any ROM , that will upgrade my RADIO version, so I can use the BuildOS ROM's.
I guess you have to upgrade the radio in the Titan, just as you do in the Vogue to use these ROMs, correct?
Also, which build , or what ROM do you recommend me trying out first.
Thanks guys. I really hope you help a long time XDA bud out here.
I have used several of DCD's Titan ROM's and I love them. BTW, I have an Alltel PPC-6800. I just flashed mine again with DCD's newest ROM 3.2.5 and I am using radio 3.42.30, with no problems yet. Good luck and welcome to Titan world.
gary76usmc said:
I have used several of DCD's Titan ROM's and I love them. BTW, I have an Alltel PPC-6800. I just flashed mine again with DCD's newest ROM 3.2.5 and I am using radio 3.42.30, with no problems yet. Good luck and welcome to Titan world.
Click to expand...
Click to collapse
+1 on everything he said
rleejr79 said:
+1 on everything he said
Click to expand...
Click to collapse
X2 on that
Are you dead set on using BuildOS from ppcgeeks?
I would use roms based off dcd's kitchen only. ppckitchen doesn't seem nearly as stable as dcd's roms.
I just bought my girlfriend a vogue yesterday and we were upgrading the rom and everything. Theyre basically the same in regards to upgrading
Agree with the majority
I have to agree that the DCD ROMs have treated me the best.
I have tried the ppcgeeks Kitchen and always come back.
haha thats silly. your claim to fame is creating a thread in r&d. had to point it out
but yeah, use DCD's latest, and 3.42.30 radio. you can't go wrong.
Thanks Guys!!!
Hey guys. Thanks for the info. Im gettin ready to try DCD's kitchen right now.
And hey agaus, thats not my ticket to fame. But that is how most people on this site know me is for answering things in that thread. Everyone has clicked it one time or another.
The only reason I mentioned it here is for this reason. If a noob posted a question in here , and has very little knowledge of flashing, most of the time, the thread is completley looked over. I just wanted to make it a point that I wasn't a noob, and that I just needed some guidance here in the titan world.
Also. I miss my Vogue. I loved my Vogue. But the Titan ROCKS! The only thing that actually made me keep it was the ability to use WifiRouter. I run my laptop, my iPod touch, and everything off it. I even created an app to run along side with WifiRouter, that will allow to connect to my PS3.
Get wifirouter if you do not have it.
Thanks guys.
TweakMan said:
Hey guys. Thanks for the info. Im gettin ready to try DCD's kitchen right now.
And hey agaus, thats not my ticket to fame. But that is how most people on this site know me is for answering things in that thread. Everyone has clicked it one time or another.
The only reason I mentioned it here is for this reason. If a noob posted a question in here , and has very little knowledge of flashing, most of the time, the thread is completley looked over. I just wanted to make it a point that I wasn't a noob, and that I just needed some guidance here in the titan world.
Also. I miss my Vogue. I loved my Vogue. But the Titan ROCKS! The only thing that actually made me keep it was the ability to use WifiRouter. I run my laptop, my iPod touch, and everything off it. I even created an app to run along side with WifiRouter, that will allow to connect to my PS3.
Get wifirouter if you do not have it.
Thanks guys.
Click to expand...
Click to collapse
If you were "not a NOOB" then perhaps your first two posts here in "Titan Land" would have been researched prior to posting. I'm sorry to say this, but there is plenty of information about kitchens and w/e else. And most of which is preference to the user. The DCD roms are about the best you'll find here, or anywhere else for that matter. Making more then half of your first post about how much of an un-noob you are doesn't help your case when you ask for help. Just ask it like anybody else would and I'm sure it would be answered. Even if answered before.
Try them both out....PPCGeeks kitchen and DCD......there are a lot of good chefs......try NO2Chem his tools are great and so are his ROMS......Nexvision is great and JD's ROMS which you should know if you came from the Vogue.....try em all and see what YOU like.....that is the best way....
you can always try and step outside the box of dcd and no2chem, and try out JDs rom. he just began working on the titan again about 2 weeks ago, and i think the speed of his rom alone justifies why people should atleast give it a spin.
http://forum.ppcgeeks.com/showthread.php?t=32990
(the latest rom on there labeled 8-4-08 has a defect with reading sd cards. but he fixed it already in his test rom and i think a solid release should be out pretty soon)
but for your radio....why not just flash the radio only via sd? its so much easier. 3.42.50 is out now, seems to be getting a good response
PLEASE STICKY THIS!
The purpose of this thread is to consolidate all software, roms, and information on the HTC Touch Dual Neon400.
The Neon400 was released as the CDMA version of the Touch Dual in Canada to Bell and Telus exclusively thus far. At this point in time this exact model is ONLY available in canada to Telus Mobility and Bell Mobility clients.
The Neon400 sports some MAJOR changes to previous Neons and the Niki. Inside it actually has more in common with the HTC Touch Diamond than a traditional Touch Dual (Nike). The specs are as follows:
Qualcomm MSM7501A 528mhz Processor (Same as Diamond)
ROM-capacity: 256 MiB (Same as traditional Nikes)
RAM-capacity: 160 MiB (Higher than Nike, Lower than Diamond)
Full GPS Capability
Same GPU / Graphics capability as Diamond (Altho no 3d interface software provided)
Rumored to have Wifi (neither provider has the drivers/wifi enabled if that is the case).
Both Telus and Bell ship the phone with WM 6.1 Pro as an OS.
Because of the limited availablity of the Neon400, and the vastly different specs, and the fact that it has only been available since Sept. 2008. There is next to none (I have yet to find any) software or rom flashes/upgrades available.
This thread serves as a place for the few of us who have Neon400's to test out new ideas, share modding experiences, give, and receive advice.
Few of my questions right off the top:
Will the previously established methods for unlocking Nike's work for this model? (anyone yet tested?)
Are there any TESTED and COMPATIBLE Roms that work on the Neon400 thus far?
Is anyone currently working on the above projects?
Thank you and Welcome Neon400 users! Lets take advantage of the extra horse power in our HTC Nike's and get things rolling!
instead of neon400, how about all neons? i have the neon300, all pretty much the same (of what you can install on it)
I just got my Neon400 a couple weeks back.
Hopefully we can get some ROM's going for this....the battery life is killin' me!
BeatleMatt said:
I just got my Neon400 a couple weeks back.
Hopefully we can get some ROM's going for this....the battery life is killin' me!
Click to expand...
Click to collapse
They already have roms for the Neon
I'm trying to post more in these forums to show support for this phone. The other Neon ROMs may work for this phone, but nobody knows because we can't unlock the damn thing.
Is there any info on how to develop HardSPLs for phones?
i two just bought a Telus Neon400 and i found that yes it is vary buggy like when i finish a call it like freezes for a bit then its fine
it lags alot eats up mad batterie life i just want to be able to unlock it and install anew rom something that has far less bugs in it ,we need more sopport
88fingerslukee said:
I'm trying to post more in these forums to show support for this phone. The other Neon ROMs may work for this phone, but nobody knows because we can't unlock the damn thing.
Is there any info on how to develop HardSPLs for phones?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=377260
Always use the top search option to find answers : ) Very easy. This is for the Neon
Unfortunately this method doesn't work for the Neon 400. I should know, I tried. The screen turns black and you need the reset the phone.
So,no, the top search option doesn't work here.
yep i bid we should set upsomething like payment for someone who makes a hacked spl for this phone im willing to pay im sick of the bugs i really liked the touch so much sopport but for this one nothing there has to be someone out there that casn do this
hammer22 said:
yep i bid we should set upsomething like payment for someone who makes a hacked spl for this phone im willing to pay im sick of the bugs i really liked the touch so much sopport but for this one nothing there has to be someone out there that casn do this
Click to expand...
Click to collapse
You would think it would have to be somebody who has access to the phone. Since nobody else but Canadians can use it, I don't think there's much hope that any of the regular SPL writers would be able to do it.
I hope I'm wrong though. I've tried to PM Olipro asking for help, but to no avail.
We're seeking into this issue. If anyone got an original (shipped) rom for neon400, let me know.
Cya,
Viper BJK
I was able to extract the .raw files from my Telus "Neon", using the Kaiser tutorials, if this helps? I didn't know what to do beyond that...
viperbjk said:
We're seeking into this issue. If anyone got an original (shipped) rom for neon400, let me know.
Cya,
Viper BJK
Click to expand...
Click to collapse
I'm unsure if one exists. At least, I can't find one on any of the sites (bell.ca, telus.com, pdcphones.com, htc.come etc). I also heard from the Telus salesman that the phone is being discontinued. That's bad for updates. I don't know about Bell.
need HARDspl
if there is one its for the jap version of the neon400 dont know what good that would do
and as for updates htc site would have them if telus would not right it only makes sence
is there a way to extract the rom off my phone ?
neon 400's are also available in Gsm quad band not just cdma.
Hi,
I'm in Aus and has touch pro (Three Australia) upgraded to Cooked ROM (DNS v15 or something like that) a couple months back and since i haven't visited this site... and now i'm thinking of upgrading (just checking if it's worth doing it) and all i see is FUZE FuZE fUzE everywhere....
I have been researching and it seem they're the same but ATT in USA called it Fuze... am i correct? what is the different? If i upgrade the ROM to fuze will my network still working oketc? what is the benefit and disadvantage of upgrading?
Much appreciated guys!
The Fuze doesn't have the front camera and it works with the US 3G bands.
"The invention of the flame-thrower suggest that someone thought, "you know, I'd really like to set that stuff on fire over there, but I just can't be bothered to walk.""
Hahahahaha So true...
x-online said:
Hi,
I'm in Aus and has touch pro (Three Australia) upgraded to Cooked ROM (DNS v15 or something like that) a couple months back and since i haven't visited this site... and now i'm thinking of upgrading (just checking if it's worth doing it) and all i see is FUZE FuZE fUzE everywhere....
I have been researching and it seem they're the same but ATT in USA called it Fuze... am i correct? what is the different? If i upgrade the ROM to fuze will my network still working oketc? what is the benefit and disadvantage of upgrading?
Much appreciated guys!
Click to expand...
Click to collapse
This has been covered many times before and a simple search would have answered your question. The fuze is the alias given by AT&T for the 3G (GSM) touch pro. You CAN flash a fuze rom on a TP as long as it is GSM not CDMA and all you will need is a keyboard fix to revert the keyboard to the TP keyboard. The benefits of upgrading differ from rom to rom. I personally use the PROven ROM which is unprotected so you can recook the rom but have used the NATF ROM and they both work great. The Da_G ROM is great if you are looking for a clean rom.
x-online said:
Hi,
I'm in Aus and has touch pro (Three Australia) upgraded to Cooked ROM (DNS v15 or something like that) a couple months back and since i haven't visited this site... and now i'm thinking of upgrading (just checking if it's worth doing it) and all i see is FUZE FuZE fUzE everywhere....
I have been researching and it seem they're the same but ATT in USA called it Fuze... am i correct? what is the different? If i upgrade the ROM to fuze will my network still working oketc? what is the benefit and disadvantage of upgrading?
Much appreciated guys!
Click to expand...
Click to collapse
Just as a caution I suggest you read the rom specs prior to loading. Some of the US "Fuze" Roms do not do Video calling. Not really a big thing in the USA. So strongly suggest you do some research and ensure what you download has the functionality that you require. Da_G's Roms seem to have video dialing if you require it and I'm sure some of the others do too. If you like what you get a donation to the chef always goes a long way.
Hi,
I did a 15 minutes searched based on google and xda forum and only 'some' of the post that make sense. anyhow thank you for explaining. I hardly ever use the video call. Normal phone call and VOIP and GPS is probably the most thing i use in the phone
thanks again everyone for the replied, have a great x'mas and new year
Hi,
I did a 15 minutes searched based on google and xda forum and only 'some' of the post that make sense. anyhow thank you for explaining. I hardly ever use the video call. Normal phone call and VOIP and GPS is probably the most thing i use in the phone
thanks again everyone for the replied, have a great x'mas and new year
so i know that u can have a running android on ur touch pro but the cdma didnt work but look i found this at ppcgeeks http://forum.ppcgeeks.com/showthread.php?t=43753 u think that maybe it works for the tp? if not is there a working android ver here? iv been looking here and ppcgeeks, google, bing and not much luck....can anyone show me that way please? to a working cdma android if its out there thanks!
Probably not since you will still need the drivers for your device and the drivers for the Apache are completely different.
Go to this site, which has development for Android on the Raphael (the latest if I am not mistaken).
Good luck!
thanks alot for pointing me the right way.....im kinda new here so im sill tryin to feel my way around....sorry if this is a question that been asked 1000 time like a ppcgeeks