Call Recorder from a line works now!
Works only on froyo. I am test it on 3.4.2-155-2. Do not work on eclair(android 2.1), phone does not boot after install. Do not work on Gingerbread.
1) Install from CWM attached zip
2) Install Total Recall Call Recorder, you can use another program, but i test on this. Used codec mp4
All calles from a line are successfully written. Records your voice and a voice of the caller
Files for library are taken from the Chinese fimware JDGC_U6_1.11.0
Thanks we tell forceg from 4pda.ru, the idea was his.
Files from library
original message
To turn off bip every 10 seconds, open the keyboard and press any button.
Here's blurphone (record button in dialer) and stuff ported from chinese ROM Use with care! Tested on 131-177 firmwares.
Only en/ru translations.
http://forum.xda-developers.com/attachment.php?attachmentid=553215&d=1301222733
_ReBoot_ said:
Call Recorder from a line works now!
Works only on froyo. I am test it on 3.4.2-155-2. Do not work on eclair(android 2.1), phone does not boot after install.
1) Intal from CWM attachment zip
2) Install Total Recall Call Recorder, you can use different program, but i test on this. Used codec mp4
All calles from a line are successfully written. Records your voice and a voice of the caller
Files for library are taken from the Chinese fimware JDGC_U6_1.11.0
Thanks we tell forceg from 4pda.ru, the idea was his.
Files from library
original message
Click to expand...
Click to collapse
Thank you.
So, what makes all the call-recorder apps fail on non-China froyo was the lack of those libraries.
i was looking for this for a long time! i even installed 1.11 CN to have call recording.... please can you tell us if you call someone, is the "beep" present every 10 secconds?
Thanks a lot!!
Ok I can confirm that yes this works on CEE 3.4.2-155-002; and yes still beeps every 10s.
Thanks for finding root of the issue. Yes unrafa, it will be in the next version heh.
Im ready to flash barebones yeah! lol
im glad to see this solved finally ; now the beep really goes against the core values of personal choice and freedom.
Aside that, very good news thanks!
fritolays said:
Ok I can confirm that yes this works on CEE 3.4.2-155-002; and yes still beeps every 10s.
Thanks for finding root of the issue. Yes unrafa, it will be in the next version heh.
Click to expand...
Click to collapse
What would be cool it would be the whole chinese dialer ported on CEE 3.4.2-155, so we'll have the built-in record button.
I'll stay tuned on your barebones, and, in the meanwhile i will try that by myself
Is there a stock app that goes with this?
xdaid said:
What would be cool it would be the whole chinese dialer ported on CEE 3.4.2-155, so we'll have the built-in record button.
I'll stay tuned on your barebones, and, in the meanwhile i will try that by myself
Click to expand...
Click to collapse
Ya I'm looking into that too. Might be a future version, but I think it can be done. It install's fine, opens but closes instantly (not a force close). So its more a matter of finding all the dependencies. But like I've said peeps waiting on v1.3 so that first (tomorrow this time it will be up).
replacing those libs is kind of a solution, except that you need
3rd party software, which is so annoying.
galaxy had similar solution, but they do have a working phone.apk
could some one look into this where i'm stuck at, please?
ps. i actually posted the reqiured libs (all credits go to the galaxy
people who found out which libs to relpace) a month back in another
thread (Pays ROM, I think). But it seems not many were interested,
at least not for the blurphone.apk part.
More annoying is the beep every 10 sec Call recorders are plenty in the market but the phone keeps sending this horrible beep every time no matter what app you use to record :-\
Thanks to _ReBoot_!
I am trying out the app now, seems like if you keep the record setting to 'None' and initiate the recording manually then the Beep sound is eliminated.
Some minor bugs:
- If you click on the notification panel icon then it starts recording, but then when you try to play the file, no sounds are reproduced (this is done when calls are not on -going, during actual calls it works just fine)
- While saving the file when performing the step listed just above, the file name appends the last called contact name (if contact name is available).
Apart from that too good an app, very nice recording, the speaker recording was awful and the volume was inconsistent. Thanks again!
I cant believe that after so many tests i have done (really i have like 50 calls to 123 free customer service) , are you sure you actually have a 2 way call record without beeps?
Which Rom / Recorder did you use?
confirm working on defy with orange poland rom 2.2, i use androcorder with default settings, imo a bit better quality than total recorder but it still beeps....
thank's ReBoot, put this driver in my last rom!
works well on 3.4.3-11 pays 5.0. each ~9second beep exist, but it is quiet enough and not bothers.
thank you，work！
fedorfl said:
works well on 3.4.3-11 pays 5.0. each ~9second beep exist, but it is quiet enough and not bothers.
Click to expand...
Click to collapse
it doesnt bother if its a 60 secconds conversation but it bothers a lot try to have a 10 minute conversation thats more than 60 beeps. it annoys a lot ;(
Hi guys, I own a Italian Defy MB525 for 10 days, I've flash the official finland froyo 2.2 (3.4.2.-145), and install the totallRecall, I could only record the incoming voice with a slight beep, now I've installed the audio lib with recovery zip installing 10 minuts before without cache wiping, just reboot, trid to make a couple call, to my surprise now I can record both incoming also outcoming voice with NO BEEP. I think I will not flash no other further version rom, this works just for me.
Are you sure? sometimes it doesn't beep because its not recording and you only realize it when you see there's no file. Are you sure you have a recording with no beeps?
Did you flashed a 3g fix or baseband?
Stupidest workaround for continuous beep found!
Just press any number!! When recording is running press any number and there won't be any beeps during the call.
Just found it by accident
Related
Another build is here:
And now:
* more memory available
* Fixed taskbar and today's clock
* some other bugfixes
And more...
Download: http://rapidshare.com/files/214241936/SPL3.5_R6.5_B3_WM6.5_B21198.rar
Simply...Enjoy.
PS. DONT ASK FOR A SPL1.2 VERSION: there will be one for it ONLY for the final release.
Hi Michy,
Thank you for this, I didn't much like the hexagon layout. this one looks much better. What is your opinion of it?
Regards
Jay
Downloaded, will let you know.
sweet, was waiting for a couple revs to fix some glitches, just installed, wahoo! thanks
downloading now....hope the today menu's a bit faster..
mokhabarat said:
downloading now....hope the today menu's a bit faster..
Click to expand...
Click to collapse
it is...A LOT!
yes, Today seems very fast, synching to Activesync right now my 3000+ contacts
Only issue so far is I tried to activate GSensor and I get (3)Cannot Connect to GSensor BUT I had this same problem on 6.1 - is this a common problem unassociated with the ROM?
have u enabled it in control panel? it is disabled by default.
start/settings has the white GSensor button (doesn't seem to do anything)
start/gsensor and also the gsensor toggle buttons, I click on gsensor, get the popup that gsensor is on
then I get a popup :
GSen (C)SKKV Software
Cannot connect to GSensor
(3)
on start/settings/Gsensor check the second box (diamond's gsensor service) and click apply.
Restart.
Use gsen
i now realised that messenger is not working - again.
I'm sorry about that.
Outstanding Job Michy, Thank You for keeping us current with builds. Will DL and let you know how everything goes.
Cheers
BR
I have noticed that it says ring tones are corrupt as well, and you can't delete email accounts either
Jay
Edit........OK I put my sim card in and ring tones work now.
I've got US ATT and SMS seems to work fine
Exchange works fine
Ring tones are corrupt, even tried putting a brand new one in the windows/rings folder and I can't get it to work. Any ideas how we'll get a phone call incoming ring?
-nevermind, at least you do get a ringtone with incoming call, got some default boopedy bop tone
Ring Tones
I was having an issue on the 93 build with this, wav ringtones worked ok but wma would show up as corrupt.
Cheers
BR
with ringtone corrupted message, what I used to do was change the ring tone in any of my contact's and then the ringtone starts working again.....but then like 2days after it stops working again, so i do it over again...
happy,try it now
goood work !
Working Good So Far for me, Greay Job Michy!
Now it's time for some Jager and to relax
Cheers
BR
Start Menu stops working.
I love the new rom. I have been having a problem where the start menu works for a while and then just stops working. I think I have narrowed it down to starting the music through the music on the today screen and then closing it. That is when the start menu no longer works. some times it take opening and closing the media player a couple of times. i also listen to part of a song. Don't know if that changes anything.
Hi! Both Windows Live and IE doesn't work. Egress installs but exits on refresh.
Has anyone tried this app on 2.3.4 ROM?
Im running CM7 #59 with GLITCH and it does not work for me.
App devs asked me to try on stock, but I don't want to go stock for this app
I can't post the link to the app being a new user, so you can look it up in the market.
"Viber : Free calls & messages"
Uninstall whatever you downloaded from the market, install this....it works for me on the same rom with glitch kernel.
http://db.tt/V3mDpKV
Still nothing with the new APK
Is there anything I can config?
Try going to settings, applications, manage, viber, clear cache and data, see if that works.
Also, tell me exactly what happens. Is it not installing or launching?
Installation is ok.
Messaging is ok.
Whenever I initiate a call, I can hear other side talking, but no one can hear me.
If I mute the call i get FC.
Tried to activate\deactivate and still nothing. Now I have to wait 24 hours for next activation
Will update tomorrow.
Hmmm....I'll look into it and try to find a solution if I have time.
ok, I'm back in.
From what I hear, the app does not work well with CM7 builds on SGS of any kind.
Developers say that they don't support any custom ROMs officially.
Unfortunately that is correct - at this stage we won't be developing support for customized ROMs.
The issue of CM7 is being discussed in our company these days, and we might decide to support specific support for CM7 (CM7 ROM is the cause for the one-sided conversation, as far as we understand).
At any rate - try contacting CM7 developers and ask them to make the necessary adaptations with Viber. They might find that the source of the problem is CM7's fault and help you out.
Viber Team said:
Unfortunately that is correct - at this stage we won't be developing support for customized ROMs.
The issue of CM7 is being discussed in our company these days, and we might decide to support specific support for CM7 (CM7 ROM is the cause for the one-sided conversation, as far as we understand).
At any rate - try contacting CM7 developers and ask them to make the necessary adaptations with Viber. They might find that the source of the problem is CM7's fault and help you out.
Click to expand...
Click to collapse
Is there something specific in the TouchWiz framework that you are depending on? CM7 is a stock AOSP ROM so it should be generic and so unless Viber is using TouchWiz customized framework stuff, it should work in CM7.
To be frank I don't fully know the answer to that question, but evidently there is SOME incompatibility between CM7 and Viber. Logic says that if Viber works fine on stock ROM, then it's CM7 that needs to do the adaptations.
As I said, we're looking into it and hopefully we'll have announcements soon.
Viber Team said:
To be frank I don't fully know the answer to that question, but evidently there is SOME incompatibility between CM7 and Viber. Logic says that if Viber works fine on stock ROM, then it's CM7 that needs to do the adaptations.
As I said, we're looking into it and hopefully we'll have announcements soon.
Click to expand...
Click to collapse
Agreed, hopefully one of your users will send us logcats of what is going on if they want us to look at it.
i'll be happy to send logs but im new to logcat.
How should I configure aLogcat (from market?) and where to send the log.
I've used it for the past few days on MIUI which is based on CM7. It works great.
I had been trying for two days to fix a problem where I cannot hear the other party of a voice call until I realized that the app treats the call sound as a system sound (which I usually mute). when I turned the system sound level up, the problem was solved.
طوني تبولة said:
I had been trying for two days to fix a problem where I cannot hear the other party of a voice call until I realized that the app treats the call sound as a system sound (which I usually mute). when I turned the system sound level up, the problem was solved.
Click to expand...
Click to collapse
Hmm..
Could you please elaborate on that? i.e give me a step-by-step solution, so we can try and suggest it to other users of ours with CM7.
Back with some insights.
Apparently my mic is not working when Viber is running. Tried to check it on some other app, also didn't work. Ill try to follow up on that in CM forums.
P.S
Skype does work.
sound is working now.
I installed glitch incorrectly...
The viber issue is still in place
Viber Team said:
Hmm..
Could you please elaborate on that? i.e give me a step-by-step solution, so we can try and suggest it to other users of ours with CM7.
Click to expand...
Click to collapse
I usually set the system sound level to the lowest to avoid the noise from the startup and shutdown sounds.
When I tried to make phone calls through Viber, I couldn't hear the other party even when I tried to raise the volume up during the call (it had no effect)
so I decided to try adjusting the system sound level and see if that helps, and it helped
system volume adjustment is not an option on CM7. Well, i don't have it.
طوني تبولة said:
I usually set the system sound level to the lowest to avoid the noise from the startup and shutdown sounds.
When I tried to make phone calls through Viber, I couldn't hear the other party even when I tried to raise the volume up during the call (it had no effect)
so I decided to try adjusting the system sound level and see if that helps, and it helped
Click to expand...
Click to collapse
Thanks for the info.
Are you running a customized ROM?
Also, what device do you have and which Android version?
Hi all,
Already posted this in the general forum section, but I guess this is the more appropriate one.
I loaded Arco's CM9 port on my GT-i9001 a couple of days ago. Everything works great, except for voice chat apps.
When I voice call someone in gtalk, I can't hear anything and the other party can't hear me. Even though I end the call, it seems to get stuck and sound won't work at all on the phone until I reboot.
Attached is the logcat for when I make a voice call in gtalk.
When I loaded Arcos CM9 port, i also loaded the gapps from the link specified on his thread.
Also, a similar issue occurs with skype, when I call someone, we can hear each other for a second or two, then it also dies.
Any idea what could be causing this?
Thanks.
Maybe someone can help me. When I first started using this phone, it had an option to record when I made a call. Im almost 100% sure it was there. I rooted, installed wanam, told it to move the record option to menu and add call in the place of record. I messed up my phone and had to flash stock. I've flashed between MI3 and MI5 a few times and noticed record call option is missing. Is this something that I have lost forever, or did it only come with the default option in wanam as I did not touch anything in wanam until I moved it to the menu? Im pretty sure I tested the recording before I rooted the phone, but my days kind of run together. Please let me know as Im about to flash stock MI3 again.
evilvoice said:
Maybe someone can help me. When I first started using this phone, it had an option to record when I made a call. Im almost 100% sure it was there. I rooted, installed wanam, told it to move the record option to menu and add call in the place of record. I messed up my phone and had to flash stock. I've flashed between MI3 and MI5 a few times and noticed record call option is missing. Is this something that I have lost forever, or did it only come with the default option in wanam as I did not touch anything in wanam until I moved it to the menu? Im pretty sure I tested the recording before I rooted the phone, but my days kind of run together. Please let me know as Im about to flash stock MI3 again.
Click to expand...
Click to collapse
I believe it came with the default Wanam install. I ditched that and went with galaxycallrecorder The recording quality is outstanding on the GN3. It records at line level so the playback sounds just like the original call. That and several other options makes this z keeper and the price is reasonable compared to most others. I think it's worth a try.
https://play.google.com/store/apps/details?id=com.record.my.call is what I use. Just go to tweaks, audio source, phone call and recording format wav and it records great on both sides.
just install Mythtrandyr's secphone.apk
evilvoice said:
Maybe someone can help me. When I first started using this phone, it had an option to record when I made a call. Im almost 100% sure it was there. I rooted, installed wanam, told it to move the record option to menu and add call in the place of record. I messed up my phone and had to flash stock. I've flashed between MI3 and MI5 a few times and noticed record call option is missing. Is this something that I have lost forever, or did it only come with the default option in wanam as I did not touch anything in wanam until I moved it to the menu? Im pretty sure I tested the recording before I rooted the phone, but my days kind of run together. Please let me know as Im about to flash stock MI3 again.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2498449
Works fine with our phones. Not so sure about the Rom you are using,
I tried some apps from Playstore, but they didn't work as well as this.
Should tide you over till it gets baked into more Roms. I installed in on the Stock MJ4.
Hello everyone, I have a few issues on my device and would like your opinions on them:
1 - Whenever i get a persistent notification like "Music player (with buttons to play etc.)" or "You're in a call with John <timer>" these kind of notifications, if i press the home button while in the respective app for the notification, the notification sound goes on as if i received a notification. like the notification is already there, but when i click the home button the notification sound "rings" idk why... if you guys go to the music player (any one, i tried like 5 already) and play any song and click the home button to go out of the player, do you get the notification sound? (also happens in calls, messages,whatsapp,etc)
2 - Games on my device use abnormal amounts of data, like Rules Of Survival, it used to consume 5 mb per match or so, now after i updated to B133, it used 13 GB for 2 matches, thats 7.5GB per match (it used only 5 mb before), my friend has the Galaxy s8+ and there it works fine but not on my huawei?
so now i kinda avoid playing any music on my phone, since any press on the home button will make the notification sound go on couple of times on max volume. I also avoid playing games, since the data consumed is very abnormal. I tried uninstalling and reinstalling the game but it still behaves in the same way, regardless of whether im using data or wifi too. could it be software related?
System info:
Huawei mate 10 pro, C185, 8.00.133 is the firmware i have installed, it didn't ship with it, i updated to it a few days ago.
My questions are:
Do you guys face these issues? or is it just me?
Is it okay if i flash another C*** firmware onto my device? or will that cause problems?
Do you think its a software issue and flashing would fix it?
any advice?
visuallydesigned said:
Hello everyone, I have a few issues on my device and would like your opinions on them:
1 - Whenever i get a persistent notification like "Music player (with buttons to play etc.)" or "You're in a call with John <timer>" these kind of notifications, if i press the home button while in the respective app for the notification, the notification sound goes on as if i received a notification. like the notification is already there, but when i click the home button the notification sound "rings" idk why... if you guys go to the music player (any one, i tried like 5 already) and play any song and click the home button to go out of the player, do you get the notification sound? (also happens in calls, messages,whatsapp,etc)
2 - Games on my device use abnormal amounts of data, like Rules Of Survival, it used to consume 5 mb per match or so, now after i updated to B133, it used 13 GB for 2 matches, thats 7.5GB per match (it used only 5 mb before), my friend has the Galaxy s8+ and there it works fine but not on my huawei?
so now i kinda avoid playing any music on my phone, since any press on the home button will make the notification sound go on couple of times on max volume. I also avoid playing games, since the data consumed is very abnormal. I tried uninstalling and reinstalling the game but it still behaves in the same way, regardless of whether im using data or wifi too. could it be software related?
System info:
Huawei mate 10 pro, C185, 8.00.133 is the firmware i have installed, it didn't ship with it, i updated to it a few days ago.
My questions are:
Do you guys face these issues? or is it just me?
Is it okay if i flash another C*** firmware onto my device? or will that cause problems?
Do you think its a software issue and flashing would fix it?
any advice?
Click to expand...
Click to collapse
Don't have these issues ... But I don't use a notification sound.
you must have high speed wifi if u download 7.5gig in one match. Thats so weird... I don't know what it downloads. Maybe you can share some screenshots.
Rebranding your device is actually kinda risky if you don't know what your doing. I don't think this should be a reason to do so anyways
The only thing I experience sometimes is that WhatsApp message banners sometimes appear twice for the same message when I didn't read it yet. But no vibration, no sound and nothing connected to the home button
0alfred0 said:
Don't have these issues ... But I don't use a notification sound.
you must have high speed wifi if u download 7.5gig in one match. Thats so weird... I don't know what it downloads. Maybe you can share some screenshots.
Rebranding your device is actually kinda risky if you don't know what your doing. I don't think this should be a reason to do so anyways
The only thing I experience sometimes is that WhatsApp message banners sometimes appear twice for the same message when I didn't read it yet. But no vibration, no sound and nothing connected to the home button
Click to expand...
Click to collapse
thanks for the reply alfred! can i ask what firmware are you on exactly?
another question please, would downgrading to a previous firmware version (same region) cause any issues?
thanks!
Bla L29 c432 138 (basically same as 137)
I am not sure if u didn't have this issue before updating I guess yes.
Anyways before doing something crazy contact Huawei... Their customer service is usually decent. They should fix it u paid them enough money... If you mess around with firmware you only end up voiding warranty
Please help.. How to do auto settings for page trandlation
Hello,
Please help and advise me on settings such that a page opened in any language is automatically translated to English language which is the default language set On my Huawei Mate 10 Pro. I am unable to resolve this and any help will be hugely appreciated. Thank you.
I got the same trouble with volume set.