[Q]E:Can't Mount /dev/block/mmcblk0p2 - Fascinate Q&A, Help & Troubleshooting

Currently running SC2.9 and tried to flash the 2.9.1.zip via
ROM Manager.
When it went to blue "stock" recovery mode
This message shows up
E:Can't Mount /dev/block/mmcblk0p2 (No such file or directory)
+ when apply zip is initiated
This message shows up
"Verifying update package....
E:failed to verify whole -file signature
E:signature verification failed Installation aborted."
Any help is greatly appreciated.

You can't apply non-official updates from stock recovery, unless it's a patched stock recovery and you're applying the CWM update.zip. You need to flash CWM zips from CWM.

Related

faield to verify whole-file signature

I am trying to backup my rom on an SGS2 and installed Flash ClockworkMod Recover 4.0.1.5 via ROM manager but when I click backup ROM I get this error:
E:faield to verify whole-file signature
E:signature verification failed
Installation aborted.
Stop using ROM manager
Flash this kernel.
CWM installation via rom manager is fake. Flash any kernel that has cwm. Codeworkx's kernel for example. Boot into recovery and choose backup. If you are worried about renaming your backup folder, you can do it provided, there are no spaces in between characters.

Clockwork Mod Touch

Hi Guys,
Need a bit of help here.
I bought the clockworkmod touch yesterday, I flashed it, but when I went into recovery it wasn't touch, so I wiped cache, dalvik cache etc...and then isntalled the update.zip to no avail it said "E: failed to verify whole-signature", I tweeted @clockworkmod, and he said it was because I was using SpeedMod Kernel.
So I moved over to Siyah kernel, installed that fine and restored my data/cache using CWM when it booted. I then try to flash ClockworkMod Touch through ROM Manager, the green bar fills, and then says "Succesfully downloaded ClockworkMod recovery!"
I click ok, and then go to "reboot into recovery" I'm presented with red text that says:
E:missing bitmap password_highlight (code-1),
E: missing bitmap password_confirm_45 (code-1),
E: Missing Bitmap password_retry_45 (code-1)..."
I'm then presented with:
Installing Package...
Opening Update Package
Verifying Update Package...
E:Failed to verify whole-file signature
E:Signature Verification failed.
Installation aborted
I've then gone into three button method, and tried to apply, /sdcard/update.zip and it comes up:
Finding update package
Opening update package
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
I'm running the following setup:
Model:GT-I9100
Android: 2.3.5
Baseband version: I9100XXK14
Kernel Version: [email protected] #294
Build number: Gingerbread.XWKJ1
I would like it if I could get this fixed without using Odin, as i'm at work most of the time and because of some stupid drive encrytion I can't put my phone in without encrypting it, BSkyB's rules apparently. I have tomorrow off, so I can if neccesary boot my laptop up and fiddle with odin.
Just wanna get this sorted, I purchased this and wanna use it.
Any help is much appreciated.
You have to wait until devs add this to their kernels/ roms
Sent from my sgs2 running cm9 using xda app
Is there no kernel that can support it?
I actually don't really care which kernel I use, aslong as it 's Stock rom for now, then I may look at new 4.0 roms/kernels when they've been out a good few more months, and when obviously clockwork mod touch is more commonly added to kernels/roms.
A guess its Rom Manager as SGS2 does not like it .
As this is an app their is a thread in the applications section .
jje
richfreestone said:
Hi Guys,
Need a bit of help here.
I bought the clockworkmod touch yesterday, I flashed it, but when I went into recovery it wasn't touch, so I wiped cache, dalvik cache etc...and then isntalled the update.zip to no avail it said "E: failed to verify whole-signature", I tweeted @clockworkmod, and he said it was because I was using SpeedMod Kernel.
So I moved over to Siyah kernel, installed that fine and restored my data/cache using CWM when it booted. I then try to flash ClockworkMod Touch through ROM Manager, the green bar fills, and then says "Succesfully downloaded ClockworkMod recovery!"
I click ok, and then go to "reboot into recovery" I'm presented with red text that says:
E:missing bitmap password_highlight (code-1),
E: missing bitmap password_confirm_45 (code-1),
E: Missing Bitmap password_retry_45 (code-1)..."
I'm then presented with:
Installing Package...
Opening Update Package
Verifying Update Package...
E:Failed to verify whole-file signature
E:Signature Verification failed.
Installation aborted
I've then gone into three button method, and tried to apply, /sdcard/update.zip and it comes up:
Finding update package
Opening update package
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
I'm running the following setup:
Model:GT-I9100
Android: 2.3.5
Baseband version: I9100XXK14
Kernel Version: [email protected] #294
Build number: Gingerbread.XWKJ1
I would like it if I could get this fixed without using Odin, as i'm at work most of the time and because of some stupid drive encrytion I can't put my phone in without encrypting it, BSkyB's rules apparently. I have tomorrow off, so I can if neccesary boot my laptop up and fiddle with odin.
Just wanna get this sorted, I purchased this and wanna use it.
Any help is much appreciated.
Click to expand...
Click to collapse
I am also waiting for a fix for your problem, I was about do the same steps you have done, to install the CWM touch from my SGS2, my kernel vesrion is Siyah-V2.6.12 instead.
lets wait for a solution,

Problem with Nandroid backup

I've used CWM quite a few times with great success but having trouble now.
Running Darkyrom 10.4.2 with semaphore kernel on a SGH-T959D, when I try to backup I get the following:
E:failed to mount /dbdata (invalid argument)
--Installing package...
Finding update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
This while trying to do a rom backup. I've just flashed the semaphore kernel the other day, not sure if this is contributing to my problem. I've also tried to reinstall the app but no love. I was able to boot into recovery and do a backup from there however.
Anyone help a brutha out? I'd be very appreciative...
Still trying to figure this out. I've tried wiping cache/data to no avail. Next I reflashed 10.4.2 with a wipe and reinstalled the original kernel. Result is that I'm now able to perform the backup in question.
I'm guessing the reason it wasn't working was because of Semaphore? Does this make sense?
sounds like your in the stock recovery and not cwm recovery.
droidstyle said:
sounds like your in the stock recovery and not cwm recovery.
Click to expand...
Click to collapse
But I'm trying to backup current rom via ROM Manager? Any idea what I can do to try and fix it? I've actually just reflashed Semaphore to see if it still happens and I'm back to where I started unfortunately.
Seems like the only way I can get to recovery mode is via the following:
Power button menu
Via ROM Manager
I cannot, with either kernel, get into recovery via the 3 button method.

How to flash Entropy's Kernal on CWM

I'm not sure what I'm doing wrong. I keep trying to flash the .zip file but it says it's denied or something like that. I really want to get this ROM working on my Galaxy but I'm not going to flash until I get the recovery saved first. I hope I make sense.
E:failed to seek in /cache/update.zip (invalid argument)
E:signature verification failed
Installation aborted.
ScienceCat said:
E:failed to seek in /cache/update.zip (invalid argument)
E:signature verification failed
Installation aborted.
Click to expand...
Click to collapse
Turn off signature verification in the install zip from sd card menu and try again. It should work once you have done that
Wait, are you trying to use CWM to flash Entropy's CWM release? 'Cause the only release I've seen from him is his Daily Driver release, a version of CWM.
If that IS what you're trying to flash, you need to use Odin or Heimdall.
Extract the zimage file from the .zip. In Heimdall, you'll want to flash that file to the kernel in heimdall, or let Odin flash it wherever it belongs.

Cyanogenmod

Hello, i want to install cyanongenmod 7 [CM7] on my Orange Stockholm(Huawei U8180)
And when i reboot the phone into recovery mode, i press on, apply from sdcard: update.zip
and i wait some seconds and after this i got a message:
Code:
-- Installing package...
Finding update package...
Verifying update package...
E:failed to verify whole file signature
E:signature verification failed
Installation aborted.
can anyone help me pleaseeee??
I use: CyanongenMod 7, ClockworkMode 5.0.2.0, Rom Manager Premium v5.5.1.5
HELP ME PLEASEE ! 3 33
heyy, anyone can help me?
In ClockworkMode,in the install zip from sdcard section there is an option named:toggle signature verification..You can try that..I don't know if your version of cwm supports this option though..I use ClockworkMode 6.0.1.2 and it's there..
No, i don't have this option... :[

Categories

Resources