Flash Clockworkmod Manually? - Fascinate Q&A, Help & Troubleshooting

I installed ROM Manager, even paid for premium. But it doesnt work on my Samsung Fascinate. Couldn't get it to flash clockwork, had to use odin. But now need to downgrade clockwork from 3 to 2 because the rom i want to install still using Amend.
ROM Manager always says "An error occured while downloading your recovery" when trying to download older versions of clockwork.
How do i downgrade to a v2 of clockwork manually and where do i find the propery clockwork versions for the fascinate?
thanks

You can find the latest 2.5.1.x CWR modified by jt in this thread:
http://forum.xda-developers.com/showthread.php?t=942021
I don't believe the zip file is compatible with CWR 3.0 (Edify), so you will have to use the Odin package.
As far as ROM Manager goes, it has limited use for us Fascinate owners right now. You can download ROMs with it, but doesn't natively work with our Red CWR and it's best to not update CWR with it, either (at least right now).

i've never installed rom manager and have flash millions of stuff.

thanks, but the links appear to be broke. any other place i can find them?

Here is a link to the .tar file for use with ODIN.
http://www.megaupload.com/?d=7ZYAUQAU
Make sure to use the PDA button only.
This is the RED CWR currently in use on the fascinate.
Going to this thread here:
http://forum.xda-developers.com/showthread.php?t=942021
....and rifling through the pages will find you the .zip version of the same CWR as well.
cheers!

i would just odin work prefectly fine and pretty fast

thanks for link. got v2 and flashed with odin. finally have Super Clean on my fascinate. thanks again!

I'm trying to get a copy of cwm-recovery-ALL.zip but the dropbox link in the OP at
http://forum.xda-developers.com/showthread.php?t=942021 just gives a 403 error - according to the thread it's been that way for over a week.
Anyone got a copy? Is there a newer recovery I should be using?

gkirby11 said:
....and rifling through the pages will find you the .zip version of the same CWR as well.
Click to expand...
Click to collapse
After said rifling... consisting of clicking the go-to last page button and scrolling.....
*poof*
http://www.multiupload.com/M17L7LUUV9
This is the link to download the ".zip" version of cwr all.

jadent said:
I installed ROM Manager, even paid for premium. But it doesnt work on my Samsung Fascinate.
Click to expand...
Click to collapse
ROM Manager is not 100% friendly with Fascinate. It is best to use Odin to flash tar file or using Red CWM

Related

[Q] How to root

I have a Galaxy S Vibrant and I'm pretty new in the android community.
I made a big mistake when flashing with odin. I repartitioned the phone.
When i finally root the phone, I do not have the permission in recovery mode to load zip files from my sd.
The only thing i can do is to load packages.
How can I make a proper root and load any custom rom i like.
I have to mentioned that I used superuser - rom manager - and root checker
but nothing happened. I was in stock Eclair rom , and now i have the official froyo 2.2.
It would be great if anyone can help me out.
Thanks for reading
Alex
Have you read the guide at the top of this thread, also in my signature.
s15274n said:
Have you read the guide at the top of this thread, also in my signature.
Click to expand...
Click to collapse
I will and I'll be back if I have any questions.
Thank you
Let me know if it's not noob-tastic enough.
alexef2000 said:
I will and I'll be back if I have any questions.
Thank you
Click to expand...
Click to collapse
I did it but still no solution
I followed all the steps (what about the update.zip file)
I was in stock recovery - reinstall packages - twice but nothing three and four times, nothing again.
What am I doing wrong??
alexef2000 said:
I did it but still no solution
I followed all the steps (what about the update.zip file)
I was in stock recovery - reinstall packages - twice but nothing three and four times, nothing again.
What am I doing wrong??
Click to expand...
Click to collapse
update.zip file goes on the root {not in any folders} of your internal sd card.
someone correct me if im wrong, but if youre on official 2.2, then in order for the update.zip file to work you have to odin back to 2.1 [the files are in the posted link]
http://forum.xda-developers.com/showthread.php?t=734475
lemme know if it works out for ya
That was obvious I put the file on the internal sd (root) but still nothing.
When I reinstall the packages the phone boot up and ... when I going back into recovery mode it is still the same screen with blue letters and not green like in CWM.
I am in the stock rom 2.1 . Not 2.2. Odin was a big help.
EDIT, meant to edit this post but o well, see my next post... re-read what you stated and it sounds like you rooted fine, you just did not flash CWR
WAIT, so you DID root then... you just haven't flashed CWR
Go download rom manager and select to flash cwr, then reboot into recovery, reinstall packages twice.
THANK YOU !!! It Worked perfectly !!
Nice, now go rom manager (or cwr) and make a backup! Always nice to have a fresh stock jfd rooted to go back to.
What rom were you going to flash? Check out heathens stock and trigger, the latter has voodoo enabled fyi.

[Q] OTA is lame

Ive been really busy and have not had the time to dedicate to upgrading to ED01 from my Blackhole eclair. I have used ODIN to get to DL09 and OTA just will not update. Says server busy. Anyone have a .tar package to get me to where I need to be?
This works great and will get you to ED01
http://forum.xda-developers.com/showthread.php?t=1044474
Thank you. Ive been searching the forums and this post never came up! Im currently at stock DL09 and flashed CWM 2.5 via Odin and its broken, will not take. any ideas? Im going to try a few more time with Odin and CWM to see if it changes and decides to cooperate.
Remember these get put on root of sd card they do not flash with cwm but stock recovery
Odin CWM 3.xxx
http://forum.xda-developers.com/showthread.php?t=1046905
Then you can jump to any Modem with out the OTAs in this thread
http://forum.xda-developers.com/showthread.php?t=1097355
Good Luck!
xwhofarted said:
Odin CWM 3.xxx
http://forum.xda-developers.com/showthread.php?t=1046905
Then you can jump to any Modem with out the OTAs in this thread
http://forum.xda-developers.com/showthread.php?t=1097355
Good Luck!
Click to expand...
Click to collapse
is the DJ05 radio still compatible, if not is the suitable upgrade easily attainable (seeing as i had a hard time searching to find the previous links despite some effort), or, pretty please, will you link it?
Also, read through all the info you linked and im curious to know if CWM 3.xx works for all steps..there seemed to be an upgrade of CWM with each increasing modem level.
Lastly, please confirm: CWM 3.xx via odin, reboot. Boot into CWM and install DL09 to EA28 CWM modem delta. Reboot. Boot into CWM and install EA28 to ED01 CWM modem delta. Reboot and begin to ROM/Theme as once before....?
wardcst said:
This works great and will get you to ED01
http://forum.xda-developers.com/showthread.php?t=1044474
Click to expand...
Click to collapse
Ive tried this three times now using stock recovery. I get an error message: failed to verify whole-file signature: signature verification failed: installation aborted. I downloaded from three different sources in my attepmts. Once downloaded I use ASTRO to move them to root on SD card file name update.zip. boot into Android system recovery, apply sdcard:update.zip and error as described earlier. Mind you I am stock, unrooted DL09
You need to use the cwm-recovery-all from jt.
1. Pick a custom kernel if you want & put it on your sd card where you can find it.
2. D/l Jt's cwm-recovery-all on your pc.
3. Odin the cwm-recovery-all & put your battery back in & boot directly into it using the 3 button method.
4. Flash your kernel of choice. This will ensure your recovery stays put.
Note: You may not need to flash a custom kernel because I think the odin file permanently overwrites the stock blue recovery but it never hurts to be sure. If you stay on the stock kernel there's a chance it may overwrite cwm when it boots. This eliminates the need to rename anything in order to flash it. Not claiming to be an expert & its obvious your familiar with the mechanics of the process so it should work out. Hope this helps.
Edit: Sorry, forgot to get to the point. Once you've got cwm working you can upgrade the radio using the aforementioned process without having to rename the files. Probably would be a good idea to update the cwm to a more current one as well eventually. But the recovery-all will get you started.
Sent from my SCH-I500 using XDA App
if all you are trying to do [from what i understand] is upgrade your modem from DL09 to ED01
you are already on DL09
in my second link download the zip for DL09 to ED01 zip file and put it on your SD Card.
Flash the CWM ( do not turn back on)
Hold Down the volume up, volume down, and Power button [ 3 finger salute] untill you see the samsung LOGO then you can let go.
Use the volume keys to get to "install zip from sd card" and install the dl09 to ed01 zip reboot and you are at ed01.
Done
Server not available
I tried the Gingerbread leak but decided to go back after ruining an SD card. I reinstalled ED01 but cannot get the ED04 update. Keeps saying server is unavailable
Is this something they do before a new release, take the server down?
xwhofarted said:
Then you can jump to any Modem with out the OTAs in this thread
http://forum.xda-developers.com/showthread.php?t=1097355
Good Luck!
Click to expand...
Click to collapse
In the Link Odin DL09 and you can jump right to ED04
Was the modem the only thing updated in ED04?
Thanks, but I tried all that. Seems I had a bad dl09 install. As soon as I odined the vzw-dl09.tar from adrynalyne the vzw OTA damned near immediately picked it up and took it right to ED04. Now I'm looking for a decent ROM that won't need too much fussing.
Sent from my SCH-I500 using XDA App

[Q] Big problem with ROMS

Hey,
Ive been searching for 6 hours now and i still haven't found the solution to my problem.
My problem:
Today i got my Samsung Galaxy S2, so i wanted to put a custom ROM on it using this guide: http://www.redmondpie.com/install-cm7-on-galaxy-s2-using-rom-manager-how-to-tutorial/.
Firstly i rooter my phone without a problem. After that i followed the guide. This was no problem untill i had to: 'Launch ROM Manager and tap on Flash ClockworkMod Recovery and pick Samsung Galaxy S II from the list of compatible smartphones.' There was an error in recovery mode about verification.
After this i flashed my phone with clockworkMod-Recover to be able to put of verification. When i toggled it off i tried to update my phone to CM7 wich was on my sd card.
When i tried rebooting now it was stuck on loading screen with the well-known yelolow triangle.
I tried everything (including: http://forum.xda-developers.com/showthread.php?t=1108499 -> did everything perfectly). I tried to flash other stuff. But still same problem i wiped it a lot, still nothing.
I can acces download and recovery mode without any problems. i even flashed the phone to the stock kernel (Kernel_I9100XWKI4). so now i dont have a yellow triangle but still stuck at boot screen.
I am desperate and depressed that my expensive phone wont boot up. Can anyone please help me out i'm even willing to pay the one who helps me out.
Thanks in advance!
try flashing stock ROM from here
http://forum.xda-developers.com/showthread.php?t=1075278
TheFaixy said:
try flashing stock ROM from here
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Tried this a lot, doesnt fix it.
1) Get the right CF Kernel from the Chainfire kernel thread in the Android Original Development Thread. Extract the zip to get a TAR and extract the TAR to get a z-image file. Also download the corresponding original stock kernel from the Intratech thread in the same section.
2) Flash the TAR in PDA using Odin. Do not click repartition. This lets you boot with with functional Root and CWM.
3) If you want to get rid of the yellow triangle, then load the z-image file into /sdcard. Reboot into download mode and use Odin to flash the stock kernel (again in the PDA without repartition). After that, go to the CWM app, choose flash kernel and locate the zimage and proceed.
NB: You can read Chainfire and Intratechs threads in case I was vague somewhere.
Installing CM
1) After all this, put the latest nightly into /sdcard
2) Boot into recovery.
3) Clear Data, Cache, Dalvik Cache (in advanced). Go to install Zip-->Choose Zip from SD card--> Choose the CM7 nightyl file.
4) Flash is twice i.e consecutively. The first time, it just takes like a second to flash, the second time will be the complete install. No idea why this happens or whether its been fixed now.
5) Reboot.
The next time, dont google for this type of Info. The XDA forums has everything you need and a good search engine too.
Let me know if you still have issues.
Cheers.
EDIT: RomManager works best on CM7 only. I suggest that you keep it that way. It does not work with the basic stock rooted CF Kernels as is mentioned on his thread.
jayerfernandes said:
1) Get the right CF Kernel from the Chainfire kernel thread in the Android Original Development Thread. Extract the zip to get a TAR and extract the TAR to get a z-image file. Also download the corresponding original stock kernel from the Intratech thread in the same section.
Click to expand...
Click to collapse
Can u provide me a links to this, i don't seem to find it.
just gonna ask the obvious question here, you do have the international gs2 dont you? not an american t-mobile or at&t version?
skimminstones said:
just gonna ask the obvious question here, you do have the international gs2 dont you? not an american t-mobile or at&t version?
Click to expand...
Click to collapse
I got the European one yes.
I ought to have mentioned SGS2 Android Original development forum.
Chainfire - http://forum.xda-developers.com/showthread.php?t=1103399
Intratech - http://forum.xda-developers.com/showthread.php?t=1075278
jayerfernandes said:
1) Get the right CF Kernel from the Chainfire kernel thread in the Android Original Development Thread. Extract the zip to get a TAR and extract the TAR to get a z-image file. Also download the corresponding original stock kernel from the Intratech thread in the same section.
2) Flash the TAR in PDA using Odin. Do not click repartition. This lets you boot with with functional Root and CWM.
3) If you want to get rid of the yellow triangle, then load the z-image file into /sdcard. Reboot into download mode and use Odin to flash the stock kernel (again in the PDA without repartition). After that, go to the CWM app, choose flash kernel and locate the zimage and proceed.
NB: You can read Chainfire and Intratechs threads in case I was vague somewhere.
Installing CM
1) After all this, put the latest nightly into /sdcard
2) Boot into recovery.
3) Clear Data, Cache, Dalvik Cache (in advanced). Go to install Zip-->Choose Zip from SD card--> Choose the CM7 nightyl file.
4) Flash is twice i.e consecutively. The first time, it just takes like a second to flash, the second time will be the complete install. No idea why this happens or whether its been fixed now.
5) Reboot.
The next time, dont google for this type of Info. The XDA forums has everything you need and a good search engine too.
Let me know if you still have issues.
Cheers.
EDIT: RomManager works best on CM7 only. I suggest that you keep it that way. It does not work with the basic stock rooted CF Kernels as is mentioned on his thread.
Click to expand...
Click to collapse
I allready get stuck on the first thing, i flashed the CF kernel with Odin and after this he wont boot so i cant procede. This is my problem he just doesnt wanna boot.
I dont want any custom ROM's anymore i just want the default phone back. This is a disaster.
Did you choose the right CF Kernel. It has to be chosen to be inline with the Kernel version that came with your phone. As you've not managed to flash a modded kernel, you will still be on the same kernel that came along with you phone. You cant choose any CF Kernel that you like.
You've mentioned Kernel_I9100XWKI4. Is this the same that came with the phone or did you pick some random kernel?
Another option is to try that android recovery, but Im not familiar with it and its options.
I had the same issue as you when I was playing around with cutom kernels and CWM
jayerfernandes said:
Did you choose the right CF Kernel. It has to be chosen to be inline with the Kernel version that came with your phone. As you've not managed to flash a modded kernel, you will still be on the same kernel that came along with you phone. You cant choose any CF Kernel that you like.
You've mentioned Kernel_I9100XWKI4. Is this the same that came with the phone or did you pick some random kernel?
Another option is to try that android recovery, but Im not familiar with it and its options.
I had the same issue as you when I was playing around with cutom kernels and CWM
Click to expand...
Click to collapse
Yes that is the original one (I9100XWKI4). I am also not familiar with android recovery.
Ok, if its KI4, then theres a Ki4 for Gingerbread 2.3.4 and another for 2.3.5. You have to choose the right one
http://forum.xda-developers.com/showpost.php?p=17704099&postcount=6
jayerfernandes said:
Ok, if its KI4, then theres a Ki4 for Gingerbread 2.3.4 and another for 2.3.5. You have to choose the right one
http://forum.xda-developers.com/showpost.php?p=17704099&postcount=6
Click to expand...
Click to collapse
I tried both, none worked :s
Then I think its best that you head over to Intratechs thread, a new firmware itself and flash it over. As you say KI4, download XWKI4 2.3.4, both the OXX multi CSC and the stock kernel and reflash your whole firmware as per the instructions in the thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Also make sure that Samsung Kies is not running anywhere. Kill it in processes and do not let it boot in msconfig.
jayerfernandes said:
Then I think its best that you head over to Intratechs thread, a new firmware itself and flash it over. As you say KI4, download XWKI4 2.3.4, both the OXX multi CSC and the stock kernel and reflash your whole firmware as per the instructions in the thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Also make sure that Samsung Kies is not running anywhere. Kill it in processes and do not let it boot in msconfig.
Click to expand...
Click to collapse
FIXED
I wan't to thank u so mutch right now. Send me a pm for payment!
None required mate. If you are still interested in rooting, follow the instructions Id mentioned in my first post using the CF KI4 Kernel for 2.3.4 and you should be fine.
As an alternative custom rom to CM7, check out GingerMod, I can vouch for it.
jayerfernandes said:
None required mate. If you are still interested in rooting, follow the instructions Id mentioned in my first post using the CF KI4 Kernel for 2.3.4 and you should be fine.
As an alternative custom rom to CM7, check out GingerMod, I can vouch for it.
Click to expand...
Click to collapse
Well i rly wanted this skin: https://market.android.com/details?id=com.david1171.minimalbread&feature=related_apps
That is very kind of u.
but i'm afraid now to try it again. So if u would make me a detailed version of how to install it step by step starting from what i have now. i would be very gratefull!
I got CM7 to work thanks again for all the help!
Glad to hear that.

[Q] rooted but cwm recovery is not!

Hello everyone, Im truly at a loss...
ive been going at this for weeks reading countless threads and differnt sites and i cant figure it out...
My at&t is rooted.. i do have super user access and rom manager installed..
the only problem is when i go into rom manager and reboot into recovery or try to flash a rom i get an error...
e: fialed to verify whole file signature
e: signature verification failed
installation aborted..
it is the blue screen and not the recovery orange screen.... why isnt my recovery not installed and how do i install it??
please help..
if you need any info please let me know thank you..
kind of difficult to understand what you're actually asking, btw the cwm recovery is not orange it's lightblue. also, DON'T USE ROM MANAGER
Nick281051 said:
kind of difficult to understand what you're actually asking, btw the cwm recovery is not orange it's lightblue. also, DON'T USE ROM MANAGER
Click to expand...
Click to collapse
Hi nick. I made a video of my problem http://www.youtube.com/watch?v=B7cxryEC5ig
Also...if you're telling me to not use Tom manager then what do I use to install roms?
Thanks in advanced
xxkhbxx said:
Hi nick. I made a video of my problem http://www.youtube.com/watch?v=B7cxryEC5ig
Also...if you're telling me to not use Tom manager then what do I use to install roms?
Thanks in advanced
Click to expand...
Click to collapse
Rom manager is not fully functional on the SGSII. In particular, you can not use recovery through Rom Manager. To gain ClockworkMod Recovery, you must install a custom kernel containing CWM Recovery.
You can install a kernel with Odin3, Heimdall, adb, Android Terminal Emulator, or Mobile Odin Lite. If you use Odin3 or Heimdall, this will increment the flash counter. Adb, Terminal and Mobile Odin Lite will not increment the flash counter. If you need specific guidance, look at the FAQ in sticky section of the General forum, or follow the Guide linked in my signature. (I havn't added Mobile Odin Lite to the guide yet, but it's a pretty easy option. If you download it from Chainfires thread, it is free. If you get the pro version from the market there is a small charge.)
You can't boot into recovery through rommanager. You should do the three button boot (press power+volup/down) once you do that you will be able to flash roms without any issue.
Blaze9 said:
You should do the three button boot (press power +vol up/down) once you do that you will be able to flash roms without any issue.
Click to expand...
Click to collapse
You can't flash roms from stock 3e recovery, so unless there is a custom kernel installed on the phone you will not be able to flash roms.
I'll definitely cast a vote for Mobil Odin. I flashed Entropy 512's latest kernal through the Pro version, and it took less than 10 seconds!
creepyncrawly said:
You can't flash roms from stock 3e recovery, so unless there is a custom kernel installed on the phone you will not be able to flash roms.
Click to expand...
Click to collapse
Yes, but he said it is the blue recovery screen, which is CWM. The orange screen is stock recovery.
Blaze9 said:
Yes, but he said it is the blue recovery screen, which is CWM. The orange screen is stock recovery.
Click to expand...
Click to collapse
Yes. I looked at his video again. The video is bad, very blurry, but it does look like he has ClockworkMod Recovery 5.0.2.3 installed, not 3e recovery. So your directions would be good in that case.
BYW, I believe that stock 3e recovery is also blue text. It's been a while since I booted into 3e recovery though.
creepyncrawly said:
Yes. I looked at his video again. The video is bad, very blurry, but it does look like he has ClockworkMod Recovery 5.0.2.3 installed, not 3e recovery. So your directions would be good in that case.
BYW, I believe that stock 3e recovery is also blue text. It's been a while since I booted into 3e recovery though.
Click to expand...
Click to collapse
3e recovery is indeed blue on our phone, just like CWM.
Sent from my SAMSUNG-SGH-I777 using xda premium
Hey Creepy thanks for the heads up and link i feel like part of my prob is syncin to my computer.(it has not been same since windows crashed)Any whos i tried the QR code but said download unsuccessful. Haven't had a chance to do the download. Question is can i just buy mobile Odin off market and download a kernel directly onto my phone from internet/no computer required?
Thanks
ghettopops said:
Hey Creepy thanks for the heads up and link i feel like part of my prob is syncin to my computer.(it has not been same since windows crashed)Any whos i tried the QR code but said download unsuccessful. Haven't had a chance to do the download. Question is can i just buy mobile Odin off market and download a kernel directly onto my phone from internet/no computer required?
Thanks
Click to expand...
Click to collapse
That's is correct. Though mobile odin lite is on xda for free. I used it to flash entropy512's newest kernel. Worked without an issue.
Just make sure you have the zImage already extracted and on your phone.
Sent from my páhhōniē
ghettopops said:
Hey Creepy thanks for the heads up and link i feel like part of my prob is syncin to my computer.(it has not been same since windows crashed)Any whos i tried the QR code but said download unsuccessful. Haven't had a chance to do the download. Question is can i just buy mobile Odin off market and download a kernel directly onto my phone from internet/no computer required?
Thanks
Click to expand...
Click to collapse
Download Mobile Odin Lite from Chainfires OP to your pc, move MobileODINLite-v1.25.apk into the same directory where you have adb.exe, and use adb to install it with:
Code:
adb install MobileODINLite-v1.25.apk
You do not need to try to install the add-on (flashkernel). You don't need it to flash a kernel, but you do need it if you want to flash a rom. When I tried it out this weekend, it would not download the flashkernel, so after I installed the kernel, I deleted Mobile Odin Lite.
creepyncrawly said:
Rom manager is not fully functional on the SGSII. In particular, you can not use recovery through Rom Manager. To gain ClockworkMod Recovery, you must install a custom kernel containing CWM Recovery.
You can install a kernel with Odin3, Heimdall, adb, Android Terminal Emulator, or Mobile Odin Lite. If you use Odin3 or Heimdall, this will increment the flash counter. Adb, Terminal and Mobile Odin Lite will not increment the flash counter. If you need specific guidance, look at the FAQ in sticky section of the General forum, or follow the Guide linked in my signature. (I havn't added Mobile Odin Lite to the guide yet, but it's a pretty easy option. If you download it from Chainfires thread, it is free. If you get the pro version from the market there is a small charge.)
Click to expand...
Click to collapse
Thank you creepy. Thank u everyone. I will try when I get home and get back to you.
BTW what's this counter that you are mentioning?
xxkhbxx said:
Thank you creepy. Thank u everyone. I will try when I get home and get back to you.
BTW what's this counter that you are mentioning?
Click to expand...
Click to collapse
Happy to help. For information on the counter, read the fairly extensive discussions in the flash custom binaries guide and the return to the store guide linked in my signature.
thank you very much, i installed Mob odin lite and the kernel so now i am good to go. I just nandroid backed up my stock rom and am going to give a diff one a try.
creepyncrawly said:
Rom manager is not fully functional on the SGSII. In particular, you can not use recovery through Rom Manager. To gain ClockworkMod Recovery, you must install a custom kernel containing CWM Recovery.
You can install a kernel with Odin3, Heimdall, adb, Android Terminal Emulator, or Mobile Odin Lite. If you use Odin3 or Heimdall, this will increment the flash counter. Adb, Terminal and Mobile Odin Lite will not increment the flash counter. If you need specific guidance, look at the FAQ in sticky section of the General forum, or follow the Guide linked in my signature. (I havn't added Mobile Odin Lite to the guide yet, but it's a pretty easy option. If you download it from Chainfires thread, it is free. If you get the pro version from the market there is a small charge.)
Click to expand...
Click to collapse
Hello again. I haven't tried anything yet time is not permitting me to but I did install a custom kernel when I first rooted. This is the method I used if I haven't posted the link up yet. Its from zedomax on his you tube channel. I did it step by step. I was even able to make backups no problem.
https://www.youtube.com/watch?v=R-2Z2dKsuio&feature=youtube_gdata_player
Creep? I'm on my lunch break reading your other threads and what not... and I saw someone write press power / up and down buttons to get to cwm recovery ... but then I saw someone say release the power button when you see the yellow triangle.
So I did that and was in recovery 5.0.2.3 and attempted to flash cyanogen that I had stored in the phone...... the first attempt took two seconds so I remember on another post people had said to flash it again so I did. It took maybe 10 seconds this time.
I restarted.. and was joyed to see the cyanogen boot screen but was saddened to see it was caught in a boot loop. Would keep restarting and doing the bootup screen. Wouldn't pass that part so I had to do a restore .. any idea what I may be doing wrong..?
I attached a screen shot of my "about phone" thank u thank you everyone
I really can't help with installing CM7. I've never installed it myself.
From what I see, your were on stock with zedomax kernel and CWM 5.0.2.3, which as far as I know meets the requirements to be ready to flash CM7. Maybe someone with more experience can help you.
creepyncrawly said:
I really can't help with installing CM7. I've never installed it myself.
From what I see, your were on stock with zedomax kernel and CWM 5.0.2.3, which as far as I know meets the requirements to be ready to flash CM7. Maybe someone with more experience can help you.
Click to expand...
Click to collapse
Thanks creepy. Just out of curiosity do you have a Tom installed? If so then which? I would like to try your rom and see.

flashing new rom

I would like to flash a new rom. i am currently rooted. I would like to be able to use the nfc feature, as well have jellybean installed. i was looking at using this rom: http://forum.xda-developers.com/showthread.php?t=1574718. it mentions cwm. is this ok to install on my phone? also, any guidance with this would be great!
Yes its fine
Sent from my SGH-I777
Add long as your phone is an i777, you follow the instructions on the OP, and you re-wipe and flash before asking about something messing up... Yes.
I would also recommend flashing aokp 7.3 ICS, then flashing the JB ROM. It seems to be helpful.
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
OP don't forget to hit the thanks button to those who have helped you.
Sent from Team Pirate
sniper8752 said:
I would like to flash a new rom. i am currently rooted. I would like to be able to use the nfc feature, as well have jellybean installed. i was looking at using this rom: http://forum.xda-developers.com/showthread.php?t=1574718. it mentions cwm. is this ok to install on my phone? also, any guidance with this would be great!
Click to expand...
Click to collapse
Our phones have a recovery built into the kernel so make sure not to try and flash anything with Rom Manager.
Sent from Team Pirate's secret underground base
sniper8752 said:
I would like to flash a new rom. i am currently rooted. I would like to be able to use the nfc feature, as well have jellybean installed. i was looking at using this rom: http://forum.xda-developers.com/showthread.php?t=1574718. it mentions cwm. is this ok to install on my phone? also, any guidance with this would be great!
Click to expand...
Click to collapse
If you start off using any custom ROM, especially the AOKP, I do suggest you spend time read more, follow that thread (the link you provided), the more you read the more you save time and avoid headache down the road. One example that Phalanx just pointed out, it isn't listed anywhere but from reading and following that thread.
1. Make sure your device is i777, if anything other than that, stop.
2. Make sure you have the CwM Recovery installed. Do get along with the buttons such what home button does, what power button does. It depends on the CwMR version.
3. Follow the instruction of the ROM for installation.
4. Good luck and enjoy.
I have cwm installed, and I select the option in the app to reboot into recovery. it reboots, and goes into recovery mode. the only problem is, is that it is the android system recovery. I do not see an option for backup there.
sniper8752 said:
I have cwm installed, and I select the option in the app to reboot into recovery. it reboots, and goes into recovery mode. the only problem is, is that it is the android system recovery. I do not see an option for backup there.
Click to expand...
Click to collapse
For crispy sake don't use Rom manager!
Read more before flashing anything
Raise yer mizzenmast and swab 'er poop deck!
sniper8752 said:
I have cwm installed, and I select the option in the app to reboot into recovery. it reboots, and goes into recovery mode. the only problem is, is that it is the android system recovery. I do not see an option for backup there.
Click to expand...
Click to collapse
Luckily you don't have CWM installed yet using Rom Manager what you have is Rom Manager....
1. Uninstall Rom Manager ASOP
2. You need to flash a custom kernel to get CWM you can do that be installing Mobile Odin lite free from XDA and flashing a kernel...
3. You need to read LOTS more or you risk BRICKING your phone......
4. It will depend what ROM your on now what kernel you need to flash to get CWM Gingerbread = GB kernel ICS = ICS kernel PLEASE read before doing ANYTHING............
5. Go to this link and READ 3a. http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
snipe2nite said:
Luckily you don't have CWM installed yet using Rom Manager what you have is Rom Manager....
1. Uninstall Rom Manager ASOP
2. You need to flash a custom kernel to get CWM you can do that be installing Mobile Odin lite free from XDA and flashing a kernel...
3. You need to read LOTS more or you risk BRICKING your phone......
4. It will depend what ROM your on now what kernel you need to flash to get CWM Gingerbread = GB kernel ICS = ICS kernel PLEASE read before doing ANYTHING............
5. Go to this link and READ 3a. http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
Click to expand...
Click to collapse
i noticed there is only mobile odin pro now? any free solutions? and so with this, i can flash my rom?
sniper8752 said:
i noticed there is only mobile odin pro now? any free solutions? and so with this, i can flash my rom?
Click to expand...
Click to collapse
No. The lite version is still in the OP of the developers thread as an attachment.
sniper8752 said:
i noticed there is only mobile odin pro now? any free solutions? and so with this, i can flash my rom?
Click to expand...
Click to collapse
I will help you get this working, I have some questions tho to get you the right info when you see this respond back just don't do anything till
I help you.... I would rather help you then have you brick your phone but of course do whatever you want.... You can DL and install these 2 files just like any other apk install MobileODINLite first then FlashKernel I777 of course you will need to be rooted, this wont change anything on your phone it will just install the app to get you ready to flash the zImage... The next step is KEY as to what you're running now.... That's where I have questions...
https://www.dropbox.com/s/xxf4c4tvevh1gnx/MobileODINLite-v3.25.apk Here is a link to the latest release from my dropbox.
https://www.dropbox.com/s/5q4b5tkmxsdx0e1/Mobile ODIN FlashKernel I777.apk FlashKernel I777
EDIT I will be around here for about 3 hours it's 6:40am now on the west coast after that it will be like 10 hours...
got it. why does odin need my location?
also, it says that odin required an add-on to be able to flash firmwares on the device (i think i just figured it out... was that the second thing i installed?).
thanks for your help! i appreciate it.
sniper8752 said:
got it. why does odin need my location?
also, it says that odin required an add-on to be able to flash firmwares on the device (i think i just figured it out... was that the second thing i installed?).
thanks for your help! i appreciate it.
Click to expand...
Click to collapse
I'm not sure why the location permission BUT it is built by 1 of the best devs on here ChainFire nothing to worrie about....
the second file was the add-on, when you load mobile odin is it saying you need to install the add-on? Now you need to flash the zImage to get CWM if you haven't already....What firmware are you on now? I feel dumb telling to flash the 2nd file you only need the Odin lite to flash the zImage (kernel) to get CWM once you flash a new ROM in CWM you will lose all the data anyways... Now that you have um back them up and save them so when you flash a new ROM you can reinstall both of them!! Always good to have IMO...
snipe2nite said:
I'm not sure why the location permission BUT it is built by 1 of the best devs on here ChainFire nothing to worrie about....
the second file was the add-on, when you load mobile odin is it saying you need to install the add-on? Now you need to flash the zImage to get CWM if you haven't already....What firmware are you on now? I feel dumb telling to flash the 2nd file you only need the Odin lite to flash the zImage (kernel) to get CWM once you flash a new ROM in CWM you will lose all the data anyways... Now that you have um back them up and save them so when you flash a new ROM you can reinstall both of them!! Always good to have IMO...
Click to expand...
Click to collapse
I have installed both apks. zimage has to do with the bootup, right? where do i get that file? would the firmware be i777ucle5?
@sniper8752,
You seem to be flailing around in the dark. You really need to not only read, but also see how things fit together. Just a friendly warning, if you don't know what a zImage is, or why you are flashing it, or which zImage to use, you still need to do some more reading and get a better overall picture before you continue with flashing JellyBean.
The zImage is the kernel. (Don't forget to capitalize the I as linux is case sensitive.) I am assuming you are rooted but do not have ClockworkMod Recovery installed yet. You need to install a custom kernel that matches your system. That means flash a Gingerbread kernel if you currently have a Gingerbread system, or an ICS kernel if you currently have an ICS system. The various options for the kernels are available in the development section. To use a zImage with mobile odin, you must extract the zImage from the .zip file (or sometimes .tar) that the developer makes available. Mobile odin can actually pull the kernel from a tar file, but it will not recognize a zip file.
creepyncrawly said:
@sniper8752,
You seem to be flailing around in the dark. You really need to not only read, but also see how things fit together. Just a friendly warning, if you don't know what a zImage is, or why you are flashing it, or which zImage to use, you still need to do some more reading and get a better overall picture before you continue with flashing JellyBean.
The zImage is the kernel. (Don't forget to capitalize the I as linux is case sensitive.) I am assuming you are rooted but do not have ClockworkMod Recovery installed yet. You need to install a custom kernel that matches your system. That means flash a Gingerbread kernel if you currently have a Gingerbread system, or an ICS kernel if you currently have an ICS system. The various options for the kernels are available in the development section. To use a zImage with mobile odin, you must extract the zImage from the .zip file (or sometimes .tar) that the developer makes available. Mobile odin can actually pull the kernel from a tar file, but it will not recognize a zip file.
Click to expand...
Click to collapse
I have decided on flashing this rom: http://ultimatum.us/. looks like it will take about an hour to download... i currently have ics installed. to flash the zImage, do I click on "Kernel" in the app.?
thanks for help and explaining the zImage. what would be the best way to learn all of this? is there a good site so I don't have to go looking around everywhere? maybe like a beginner's guide?
sniper8752 said:
I have decided on flashing this rom: http://ultimatum.us/. looks like it will take about an hour to download... i currently have ics installed. to flash the zImage, do I click on "Kernel" in the app.?
thanks for help and explaining the zImage. what would be the best way to learn all of this? is there a good site so I don't have to go looking around everywhere? maybe like a beginner's guide?
Click to expand...
Click to collapse
Dude, you are so far off path. there are no "begginers" guides, just what we got. Honestly, this stuff aint for you man. dont mess with your phone.
but if you insist, then just keep reading.
sniper8752 said:
I have decided on flashing this rom: http://ultimatum.us/. looks like it will take about an hour to download... i currently have ics installed. to flash the zImage, do I click on "Kernel" in the app.?
thanks for help and explaining the zImage. what would be the best way to learn all of this? is there a good site so I don't have to go looking around everywhere? maybe like a beginner's guide?
Click to expand...
Click to collapse
What app? There is no app...
ClockWorkMod Recovery (CWM) yes, app NO.
EDIT: Just realized you may be talking about mobile Odin our three cwm app. Don't use either at this print, much easier using CWM (reboot into recovery of you've got a custom ROM/kernel)
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
so i should use cwm instead of odin? i thought people were telling me not to use cwm?

Categories

Resources